C++ (Cpp) hdmi_SDMA_check Examples

Example #1

File: board-mx6q_sabreauto.c Project: rogrady/lin_imx6

static void hdmi_init(int ipu_id, int disp_id)
{
	int hdmi_mux_setting;

	if ((ipu_id > 1) || (ipu_id < 0)) {
		printk(KERN_ERR"Invalid IPU select for HDMI: %d. Set to 0\n",
			ipu_id);
		ipu_id = 0;
	}

	if ((disp_id > 1) || (disp_id < 0)) {
		printk(KERN_ERR"Invalid DI select for HDMI: %d. Set to 0\n",
			disp_id);
		disp_id = 0;
	}

	/* Configure the connection between IPU1/2 and HDMI */
	hdmi_mux_setting = 2*ipu_id + disp_id;

	/* GPR3, bits 2-3 = HDMI_MUX_CTL */
	mxc_iomux_set_gpr_register(3, 2, 2, hdmi_mux_setting);

	/* Set HDMI event as SDMA event2 while Chip version later than TO1.2 */
	if (hdmi_SDMA_check())
		mxc_iomux_set_gpr_register(0, 0, 1, 1);
}

Example #2

File: board-mx6q_sabreauto.c Project: Electrongod1966/mx6-wandboard

static void hdmi_init(int ipu_id, int disp_id)
{
	int hdmi_mux_setting;
	char ipu_di_clk[] = "ipu1_di0_clk";
	struct clk *di_clk, *pll5_clk;

	if ((ipu_id > 1) || (ipu_id < 0)) {
		printk(KERN_ERR"Invalid IPU select for HDMI: %d. Set to 0\n",
			ipu_id);
		ipu_id = 0;
	}

	if ((disp_id > 1) || (disp_id < 0)) {
		printk(KERN_ERR"Invalid DI select for HDMI: %d. Set to 0\n",
			disp_id);
		disp_id = 0;
	}

	/* Configure the connection between IPU1/2 and HDMI */
	hdmi_mux_setting = 2*ipu_id + disp_id;

	/* GPR3, bits 2-3 = HDMI_MUX_CTL */
	mxc_iomux_set_gpr_register(3, 2, 2, hdmi_mux_setting);

	/* Set HDMI event as SDMA event2 while Chip version later than TO1.2 */
	if (hdmi_SDMA_check())
		mxc_iomux_set_gpr_register(0, 0, 1, 1);

	ipu_di_clk[3] += ipu_id;
	ipu_di_clk[7] += disp_id;
	di_clk = clk_get(NULL, ipu_di_clk);
	if (IS_ERR(di_clk))
		printk(KERN_ERR "Cannot get %s clock\n", ipu_di_clk);
	pll5_clk = clk_get(NULL, "pll5");
	if (IS_ERR(pll5_clk))
		printk(KERN_ERR "Cannot get pll5 clock\n");
	clk_set_parent(di_clk, pll5_clk);
}