C++ (Cpp) hub_proxi_enable Examples

Example #1

// 20100827 [email protected] [START_LGE]
int hub_proximity_check(void)
{
	int proximity_status;
	alarm_flip = ALARM_FLIP_ACTIVE;
	
//--[[ LGE_UBIQUIX_MODIFIED_START : [email protected] [2011.07.16] - flip_mode is added.
	int flip_mode = 0;

	if(!enabled) 
	{
		flip_mode = 1;
		hub_proxi_enable(hub_proximity_client);
		disable_irq(hub_proximity_client->irq);
	}
//--]] LGE_UBIQUIX_MODIFIED_END : [email protected] [2011.07.16]- flip_mode is added.
	proximity_status = hub_read_vo_bit(hub_proximity_client);

/* LGE_CHANGE_S, [email protected], 2011-04-06, Disable Proximity Log */
	//printk(KERN_DEBUG"[!]%s() - proximity status : %d\n", __func__, proximity_status);
/* LGE_CHANGE_E, [email protected], 2011-04-06, Disable Proximity Log */

//--[[ LGE_UBIQUIX_MODIFIED_START : [email protected] [2011.07.16] - proximity mode is added.
	if(flip_mode && proxi_mode == MODE_DEACTIVE)
//--]] LGE_UBIQUIX_MODIFIED_END : [email protected] [2011.07.16]- proximity mode is added.
		hub_proxi_disable(hub_proximity_client);	

//--[[ LGE_UBIQUIX_MODIFIED_START : [email protected] [2011.07.16] - proximity mode is added.
	flip_mode = 0;
//--]] LGE_UBIQUIX_MODIFIED_END : [email protected] [2011.07.16]- proximity mode is added.
	alarm_flip = ALARM_FLIP_DEACTIVE;
	
	return proximity_status;
}

Example #2

static ssize_t hub_proxi_onoff_store(struct device *dev,  struct device_attribute *attr,  const char *buf, size_t count)
{
	int val;
	int ret;
	struct hub_proxi_data* data = dev_get_drvdata(dev);

	val = simple_strtoul(buf, NULL, 10);
	sscanf(buf, "%d", &ret);

	//sprintf(buf, "%d\n", atomic_read(&proxi_status));

	if(ret)	{
		hub_proxi_enable(data->client);
	//	enable_irq(data->client->irq);
		enable_irq_wake(gpio_to_irq(PROXI_OUT));
	}
	else {
	//	disable_irq(data->client->irq);
		disable_irq_wake(gpio_to_irq(PROXI_OUT));
		hub_proxi_disable(data->client);		
	}

	data->wakeup_while_sleep = (bool)ret;

	return 0;
}

Example #3

static ssize_t hub_proxi_onoff_store(struct device *dev,  struct device_attribute *attr,  const char *buf, size_t count)
{
	int val;
	int ret;
	struct hub_proxi_data* data = dev_get_drvdata(dev);

	val = simple_strtoul(buf, NULL, 10);
	sscanf(buf, "%d", &ret);

	//sprintf(buf, "%d\n", atomic_read(&proxi_status));

	if(ret)	{
		hub_proxi_enable(data->client);
		enable_irq(data->client->irq);
//--[[ LGE_UBIQUIX_MODIFIED_START : [email protected] [2011.07.16] - proximity_mode is added.
		proxi_mode = MODE_ACTIVE;
//--]] LGE_UBIQUIX_MODIFIED_END : [email protected] [2011.07.16]- proximity_mode is added.
	}
	else {
		disable_irq(data->client->irq);
		hub_proxi_disable(data->client);		
//--[[ LGE_UBIQUIX_MODIFIED_START : [email protected] [2011.07.16] - proximity_mode is added.
		proxi_mode = MODE_DEACTIVE;
//--]] LGE_UBIQUIX_MODIFIED_END : [email protected] [2011.07.16]- proximity_mode is added.
	}

	data->wakeup_while_sleep = (bool)ret;

	return count;
}

Example #4

// 20100827 [email protected] [START_LGE]
int hub_proximity_check(void)
{
	int proximity_status;
	alarm_flip = ALARM_FLIP_ACTIVE;
	
	hub_proxi_enable(hub_proximity_client);
	disable_irq(hub_proximity_client->irq);

	proximity_status = hub_read_vo_bit(hub_proximity_client);

	printk(KERN_DEBUG"[!]%s() - proximity status : %d\n", __func__, proximity_status);

	hub_proxi_disable(hub_proximity_client);	
	alarm_flip = ALARM_FLIP_DEACTIVE;
	
	return proximity_status;
}

Example #5

static int hub_proxi_resume(struct i2c_client *client)
{
	struct hub_proxi_data *data = i2c_get_clientdata(client);

	printk("%s\n", __FUNCTION__);
	if (!enabled) return 0;
#if 0
	if (data->wakeup_while_sleep)
		disable_irq(client->irq);

	if (hrtimer_try_to_cancel(&data->timer) == 0) //timer is not active
		hrtimer_start(&data->timer, ktime_set(0, data->delay), HRTIMER_MODE_REL);
#endif
// 20101115 [email protected] work queue after wake up [START_LGE]
	if(enabled)
		schedule_work(&data->work);
// 20101115 [email protected] work queue after wake up [END_LGE]

	if (!data->wakeup_while_sleep)
		hub_proxi_enable(client);
	return 0;
}