/**
* @brief Sends data via the I2C bus.
* @details Function designed to realize "read-through-write" transfer
* paradigm. If you want transmit data without any further read,
* than set @b rxbytes field to 0.
*
* @param[in] i2cp pointer to the @p I2CDriver object
* @param[in] addr slave device address (7 bits) without R/W bit
* @param[in] txbuf pointer to transmit buffer
* @param[in] txbytes number of bytes to be transmitted
* @param[out] rxbuf pointer to receive buffer
* @param[in] rxbytes number of bytes to be received, set it to 0 if
* you want transmit only
* @param[in] timeout the number of ticks before the operation timeouts,
* the following special values are allowed:
* - @a TIME_INFINITE no timeout.
* .
*
* @return The operation status.
* @retval RDY_OK if the function succeeded.
* @retval RDY_RESET if one or more I2C errors occurred, the errors can
* be retrieved using @p i2cGetErrors().
* @retval RDY_TIMEOUT if a timeout occurred before operation end.
*
* @api
*/
msg_t i2cMasterTransmitTimeout(I2CDriver *i2cp,
i2caddr_t addr,
const uint8_t *txbuf,
size_t txbytes,
uint8_t *rxbuf,
size_t rxbytes,
systime_t timeout) {
msg_t rdymsg;
chDbgCheck((i2cp != NULL) && (addr != 0) &&
(txbytes > 0) && (txbuf != NULL) &&
((rxbytes == 0) || ((rxbytes > 0) && (rxbuf != NULL))) &&
(timeout != TIME_IMMEDIATE),
"i2cMasterTransmitTimeout");
chDbgAssert(i2cp->state == I2C_READY,
"i2cMasterTransmitTimeout(), #1", "not ready");
chSysLock();
i2cp->errors = I2CD_NO_ERROR;
i2cp->state = I2C_ACTIVE_TX;
rdymsg = i2c_lld_master_transmit_timeout(i2cp, addr, txbuf, txbytes,
rxbuf, rxbytes, timeout);
if (rdymsg == RDY_TIMEOUT)
i2cp->state = I2C_LOCKED;
else
i2cp->state = I2C_READY;
chSysUnlock();
return rdymsg;
}
/**
* @brief Sends data via the I2C bus.
* @details Function designed to realize "read-through-write" transfer
* paradigm. If you want transmit data without any further read,
* than set @b rxbytes field to 0.
*
* @param[in] i2cp pointer to the @p I2CDriver object
* @param[in] addr slave device address (7 bits) without R/W bit
* @param[in] txbuf pointer to transmit buffer
* @param[in] txbytes number of bytes to be transmitted
* @param[out] rxbuf pointer to receive buffer
* @param[in] rxbytes number of bytes to be received, set it to 0 if
* you want transmit only
* @param[in] timeout the number of ticks before the operation timeouts,
* the following special values are allowed:
* - @a TIME_INFINITE no timeout.
* .
*
* @return The operation status.
* @retval MSG_OK if the function succeeded.
* @retval MSG_RESET if one or more I2C errors occurred, the errors can
* be retrieved using @p i2cGetErrors().
* @retval MSG_TIMEOUT if a timeout occurred before operation end.
*
* @api
*/
msg_t i2cMasterTransmitTimeout(I2CDriver *i2cp,
i2caddr_t addr,
const uint8_t *txbuf,
size_t txbytes,
uint8_t *rxbuf,
size_t rxbytes,
sysinterval_t timeout) {
msg_t rdymsg;
osalDbgCheck((i2cp != NULL) &&
(txbytes > 0U) && (txbuf != NULL) &&
((rxbytes == 0U) || ((rxbytes > 0U) && (rxbuf != NULL))) &&
(timeout != TIME_IMMEDIATE));
osalDbgAssert(i2cp->state == I2C_READY, "not ready");
osalSysLock();
i2cp->errors = I2C_NO_ERROR;
i2cp->state = I2C_ACTIVE_TX;
rdymsg = i2c_lld_master_transmit_timeout(i2cp, addr, txbuf, txbytes,
rxbuf, rxbytes, timeout);
if (rdymsg == MSG_TIMEOUT) {
i2cp->state = I2C_LOCKED;
}
else {
i2cp->state = I2C_READY;
}
osalSysUnlock();
return rdymsg;
}