int ieee80211_crypto_handle_keymiss(struct ieee80211com *ic,
                                    wbuf_t wbuf,
                                    struct ieee80211_rx_status *rs)
{
    struct ieee80211_node *ni = NULL;

    /*   
     * Handle packets with keycache miss
     */
    if ((rs->rs_flags & IEEE80211_RX_KEYMISS)) {
        ni = ieee80211_find_rxnode(ic,
                (const struct ieee80211_frame_min *) wbuf_header(wbuf));

        if( ni != NULL) {
            struct ieee80211vap *vap = ni->ni_vap;

            ieee80211_key_update_begin(vap);
            if (!ieee80211_crypto_keymiss(ni, wbuf, rs)) {
	            IEEE80211_DPRINTF(vap, IEEE80211_MSG_CRYPTO, "%s: Couldn't decrypt, dropping packet.\n",
                                             __func__);
                wbuf_free(wbuf);
                ieee80211_key_update_end(vap);
                ieee80211_free_node(ni); 	
                return 1;
            }else {
                ieee80211_key_update_end(vap);
                ieee80211_free_node(ni);
            }
        }
    }
	return 0;
}
Example #2
0
static void
ath_handle_micerror(struct ieee80211com *ic,
	struct ieee80211_frame *wh, int keyix)
{
	struct ieee80211_node *ni;

	/* XXX recheck MIC to deal w/ chips that lie */
	/* XXX discard MIC errors on !data frames */
	ni = ieee80211_find_rxnode(ic, (const struct ieee80211_frame_min *) wh);
	if (ni != NULL) {
		ieee80211_notify_michael_failure(ni->ni_vap, wh, keyix);
		ieee80211_free_node(ni);
	}
}
Example #3
0
/*
 * This function determines whether the received frame is a valid UAPSD trigger.
 * Called from interrupt context or DPC context depending on parameter isr_context.
 */
bool
ath_net80211_check_uapsdtrigger(ieee80211_handle_t ieee, struct ieee80211_qosframe *qwh, u_int16_t keyix, bool isr_context)
{
    struct ieee80211com *ic = NET80211_HANDLE(ieee);
    struct ath_softc_net80211 *scn = ATH_SOFTC_NET80211(ic);
    struct ieee80211_node *ni;
    int tid, ac;
    u_int16_t frame_seq;
    int queue_depth;
    bool isapsd = false;

    /*
     * Locate the node for sender
     */
    IEEE80211_KEYMAP_LOCK(scn);
    ni = (keyix != HAL_RXKEYIX_INVALID) ? scn->sc_keyixmap[keyix] : NULL;
    if (ni == NULL) {
        IEEE80211_KEYMAP_UNLOCK(scn);
        /*
         * No key index or no entry, do a lookup
         */
        if (isr_context) {
            ni = ieee80211_find_rxnode_nolock(ic, (struct ieee80211_frame_min *)qwh);
        }
        else {
            ni = ieee80211_find_rxnode(ic, (struct ieee80211_frame_min *)qwh);
        }
        if (ni == NULL) {
            return isapsd;
        }
    } else {
        ieee80211_ref_node(ni);
        IEEE80211_KEYMAP_UNLOCK(scn);
    }


    if (!(ni->ni_flags & IEEE80211_NODE_UAPSD))
        goto end;

    if (ni->ni_flags & IEEE80211_NODE_UAPSD_SP)
        goto end;    
    /*
     * Must deal with change of state here, since otherwise there would
     * be a race (on two quick frames from STA) between this code and the
     * tasklet where we would:
     *   - miss a trigger on entry to PS if we're already trigger hunting
     *   - generate spurious SP on exit (due to frame following exit frame)
     */
    if ((((qwh->i_fc[1] & IEEE80211_FC1_PWR_MGT) == IEEE80211_FC1_PWR_MGT) ^
        ((ni->ni_flags & IEEE80211_NODE_UAPSD_TRIG) == IEEE80211_NODE_UAPSD_TRIG)))
    {
        ni->ni_flags &= ~IEEE80211_NODE_UAPSD_SP;

        if (qwh->i_fc[1] & IEEE80211_FC1_PWR_MGT) {
            WME_UAPSD_NODE_TRIGSEQINIT(ni);
            ni->ni_stats.ns_uapsd_triggerenabled++;
            ni->ni_flags |= IEEE80211_NODE_UAPSD_TRIG;
        } else {
            /*
             * Node transitioned from UAPSD -> Active state. Flush out UAPSD frames
             */
            ni->ni_stats.ns_uapsd_active++;
            ni->ni_flags &= ~IEEE80211_NODE_UAPSD_TRIG;
            scn->sc_ops->process_uapsd_trigger(scn->sc_dev,
                                               ATH_NODE_NET80211(ni)->an_sta,
                                               WME_UAPSD_NODE_MAXQDEPTH, 0, 1, WME_UAPSD_NODE_MAXQDEPTH);
        }

        goto end;
    }


    /*
     * Check for a valid trigger frame i.e. QoS Data or QoS NULL
     */
      if ( ((qwh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) !=
              IEEE80211_FC0_TYPE_DATA ) ||
             !(qwh->i_fc[0] & IEEE80211_FC0_SUBTYPE_QOS) ) {
          goto end;
      }

    if (((qwh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) == IEEE80211_FC0_TYPE_DATA) &&
       (((qwh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) == IEEE80211_FC0_SUBTYPE_QOS) ||
        ((qwh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) == IEEE80211_FC0_SUBTYPE_QOS_NULL)))
    {
        tid = qwh->i_qos[0] & IEEE80211_QOS_TID;
        ac = TID_TO_WME_AC(tid);

        isapsd = true;

        if (WME_UAPSD_AC_CAN_TRIGGER(ac, ni)) {
            /*
             * Detect duplicate triggers and drop if so.
             */
            frame_seq = le16toh(*(u_int16_t *)qwh->i_seq);
            if ((qwh->i_fc[1] & IEEE80211_FC1_RETRY) &&
                frame_seq == ni->ni_uapsd_trigseq[ac])
            {
                ni->ni_stats.ns_uapsd_duptriggers++;
                goto end;
            }

            /*
             * SP in progress for this node, discard trigger.
             */
            if (ni->ni_flags & IEEE80211_NODE_UAPSD_SP) {
                ni->ni_stats.ns_uapsd_ignoretriggers++;
                goto end;
            }

            /* start the SP */
            ni->ni_stats.ns_uapsd_triggers++;
            ni->ni_flags |= IEEE80211_NODE_UAPSD_SP;
            ni->ni_uapsd_trigseq[ac] = frame_seq;

            queue_depth = scn->sc_ops->process_uapsd_trigger(scn->sc_dev,
                                               ATH_NODE_NET80211(ni)->an_sta,
                                               ni->ni_uapsd_maxsp, ac, 0, WME_UAPSD_NODE_MAXQDEPTH);
            if (!queue_depth &&
                (ni->ni_vap->iv_set_tim != NULL) &&
                IEEE80211_NODE_UAPSD_USETIM(ni))
            {
                ni->ni_vap->iv_set_tim(ni, 0);
            }
        }
    }
end:
    ieee80211_free_node(ni);
    return isapsd;
}
static void
arn_rx_handler(struct arn_softc *sc)
{
#define	PA2DESC(_sc, _pa) \
		((struct ath_desc *)((caddr_t)(_sc)->sc_desc + \
		((_pa) - (_sc)->sc_desc_dma.cookie.dmac_address)))

	ieee80211com_t *ic = (ieee80211com_t *)sc;
	struct ath_buf *bf;
	struct ath_hal *ah = sc->sc_ah;
	struct ath_desc *ds;
	struct ath_rx_status *rs;
	mblk_t *rx_mp;
	struct ieee80211_frame *wh;
	int32_t len, ngood, loop = 1;
	uint8_t phyerr;
	int status;
	struct ieee80211_node *in;

	ngood = 0;
	do {
		mutex_enter(&sc->sc_rxbuflock);
		bf = list_head(&sc->sc_rxbuf_list);
		if (bf == NULL) {
			ARN_DBG((ARN_DBG_RECV, "arn: arn_rx_handler(): "
			    "no buffer\n"));
			mutex_exit(&sc->sc_rxbuflock);
			break;
		}
		ASSERT(bf->bf_dma.cookie.dmac_address != NULL);
		ds = bf->bf_desc;
		if (ds->ds_link == bf->bf_daddr) {
			/*
			 * Never process the self-linked entry at the end,
			 * this may be met at heavy load.
			 */
			mutex_exit(&sc->sc_rxbuflock);
			break;
		}

		/*
		 * Must provide the virtual address of the current
		 * descriptor, the physical address, and the virtual
		 * address of the next descriptor in the h/w chain.
		 * This allows the HAL to look ahead to see if the
		 * hardware is done with a descriptor by checking the
		 * done bit in the following descriptor and the address
		 * of the current descriptor the DMA engine is working
		 * on.  All this is necessary because of our use of
		 * a self-linked list to avoid rx overruns.
		 */
		status = ath9k_hw_rxprocdesc(ah, ds,
		    bf->bf_daddr,
		    PA2DESC(sc, ds->ds_link), 0);
		if (status == EINPROGRESS) {
			mutex_exit(&sc->sc_rxbuflock);
			break;
		}
		list_remove(&sc->sc_rxbuf_list, bf);
		mutex_exit(&sc->sc_rxbuflock);

		rs = &ds->ds_rxstat;
		if (rs->rs_status != 0) {
			if (rs->rs_status & ATH9K_RXERR_CRC) {
				sc->sc_stats.ast_rx_crcerr++;
			}
			if (rs->rs_status & ATH9K_RXERR_FIFO) {
				sc->sc_stats.ast_rx_fifoerr++;
			}
			if (rs->rs_status & ATH9K_RXERR_DECRYPT) {
				sc->sc_stats.ast_rx_badcrypt++;
			}
			if (rs->rs_status & ATH9K_RXERR_PHY) {
				sc->sc_stats.ast_rx_phyerr++;
				phyerr = rs->rs_phyerr & 0x1f;
				sc->sc_stats.ast_rx_phy[phyerr]++;
			}
			goto rx_next;
		}
		len = rs->rs_datalen;

		/* less than sizeof(struct ieee80211_frame) */
		if (len < 20) {
			sc->sc_stats.ast_rx_tooshort++;
			goto rx_next;
		}

		if ((rx_mp = allocb(sc->sc_dmabuf_size, BPRI_MED)) == NULL) {
			arn_problem("arn: arn_rx_handler(): "
			    "allocing mblk buffer failed.\n");
			return;
		}

		ARN_DMA_SYNC(bf->bf_dma, DDI_DMA_SYNC_FORCPU);
		bcopy(bf->bf_dma.mem_va, rx_mp->b_rptr, len);

		rx_mp->b_wptr += len;
		wh = (struct ieee80211_frame *)rx_mp->b_rptr;

		if ((wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) ==
		    IEEE80211_FC0_TYPE_CTL) {
			/*
			 * Ignore control frame received in promisc mode.
			 */
			freemsg(rx_mp);
			goto rx_next;
		}
		/* Remove the CRC at the end of IEEE80211 frame */
		rx_mp->b_wptr -= IEEE80211_CRC_LEN;

#ifdef DEBUG
		arn_printrxbuf(bf, status == 0);
#endif

		/*
		 * Locate the node for sender, track state, and then
		 * pass the (referenced) node up to the 802.11 layer
		 * for its use.
		 */
		in = ieee80211_find_rxnode(ic, wh);

		/*
		 * Send the frame to net80211 for processing
		 */
		(void) ieee80211_input(ic, rx_mp, in,
		    rs->rs_rssi, rs->rs_tstamp);

		/* release node */
		ieee80211_free_node(in);

		/*
		 * Arrange to update the last rx timestamp only for
		 * frames from our ap when operating in station mode.
		 * This assumes the rx key is always setup when associated.
		 */
		if (ic->ic_opmode == IEEE80211_M_STA &&
		    rs->rs_keyix != ATH9K_RXKEYIX_INVALID) {
			ngood++;
		}

		/*
		 * change the default rx antenna if rx diversity chooses the
		 * other antenna 3 times in a row.
		 */
		if (sc->sc_defant != ds->ds_rxstat.rs_antenna) {
			if (++sc->sc_rxotherant >= 3) {
				ath9k_hw_setantenna(sc->sc_ah,
				    ds->ds_rxstat.rs_antenna);
				sc->sc_defant = ds->ds_rxstat.rs_antenna;
				sc->sc_rxotherant = 0;
			}
		} else {
			sc->sc_rxotherant = 0;
		}

rx_next:
		mutex_enter(&sc->sc_rxbuflock);
		list_insert_tail(&sc->sc_rxbuf_list, bf);
		mutex_exit(&sc->sc_rxbuflock);
		arn_rx_buf_link(sc, bf);
	} while (loop);

	if (ngood)
		sc->sc_lastrx = ath9k_hw_gettsf64(ah);

#undef PA2DESC
}
Example #5
0
void
an_rxeof(struct an_softc *sc)
{
	struct ieee80211com *ic = &sc->sc_ic;
	struct ifnet *ifp = &ic->ic_if;
	struct ieee80211_frame *wh;
	struct ieee80211_rxinfo rxi;
	struct ieee80211_node *ni;
	struct an_rxframe frmhdr;
	struct mbuf *m;
	u_int16_t status;
	int fid, gaplen, len, off;
	uint8_t *gap;

	fid = CSR_READ_2(sc, AN_RX_FID);

	/* First read in the frame header */
	if (an_read_bap(sc, fid, 0, &frmhdr, sizeof(frmhdr), sizeof(frmhdr)) != 0) {
		CSR_WRITE_2(sc, AN_EVENT_ACK, AN_EV_RX);
		ifp->if_ierrors++;
		DPRINTF(("an_rxeof: read fid %x failed\n", fid));
		return;
	}
	an_swap16((u_int16_t *)&frmhdr.an_whdr, sizeof(struct ieee80211_frame)/2);

	status = frmhdr.an_rx_status;
	if ((status & AN_STAT_ERRSTAT) != 0 &&
	    ic->ic_opmode != IEEE80211_M_MONITOR) {
		CSR_WRITE_2(sc, AN_EVENT_ACK, AN_EV_RX);
		ifp->if_ierrors++;
		DPRINTF(("an_rxeof: fid %x status %x\n", fid, status));
		return;
	}

	/* the payload length field includes a 16-bit "mystery field" */
	len = frmhdr.an_rx_payload_len - sizeof(uint16_t);
	off = ALIGN(sizeof(struct ieee80211_frame));

	if (off + len > MCLBYTES) {
		if (ic->ic_opmode != IEEE80211_M_MONITOR) {
			CSR_WRITE_2(sc, AN_EVENT_ACK, AN_EV_RX);
			ifp->if_ierrors++;
			DPRINTF(("an_rxeof: oversized packet %d\n", len));
			return;
		}
		len = 0;
	}

	MGETHDR(m, M_DONTWAIT, MT_DATA);
	if (m == NULL) {
		CSR_WRITE_2(sc, AN_EVENT_ACK, AN_EV_RX);
		ifp->if_ierrors++;
		DPRINTF(("an_rxeof: MGET failed\n"));
		return;
	}
	if (off + len + AN_GAPLEN_MAX > MHLEN) {
		MCLGET(m, M_DONTWAIT);
		if ((m->m_flags & M_EXT) == 0) {
			CSR_WRITE_2(sc, AN_EVENT_ACK, AN_EV_RX);
			m_freem(m);
			ifp->if_ierrors++;
			DPRINTF(("an_rxeof: MCLGET failed\n"));
			return;
		}
	}
	m->m_data += off - sizeof(struct ieee80211_frame);

	if (ic->ic_opmode != IEEE80211_M_MONITOR) {
		gaplen = frmhdr.an_gaplen;
		if (gaplen > AN_GAPLEN_MAX) {
			CSR_WRITE_2(sc, AN_EVENT_ACK, AN_EV_RX);
			m_freem(m);
			ifp->if_ierrors++;
			DPRINTF(("%s: gap too long\n", __func__));
			return;
		}
		/*
		 * We don't need the 16-bit mystery field (payload length?),
		 * so read it into the region reserved for the 802.11 header.
		 *
		 * When Cisco Aironet 350 cards w/ firmware version 5 or
		 * greater operate with certain Cisco 350 APs,
		 * the "gap" is filled with the SNAP header.  Read
		 * it in after the 802.11 header.
		 */
		gap = m->m_data + sizeof(struct ieee80211_frame) -
		    sizeof(uint16_t);
		an_read_bap(sc, fid, -1, gap, gaplen + sizeof(u_int16_t),
		    gaplen + sizeof(u_int16_t));
	} else
		gaplen = 0;

	an_read_bap(sc, fid, -1,
	    m->m_data + sizeof(struct ieee80211_frame) + gaplen, len, len);
	an_swap16((u_int16_t *)(m->m_data + sizeof(struct ieee80211_frame) + gaplen), (len+1)/2);
	m->m_pkthdr.len = m->m_len = sizeof(struct ieee80211_frame) + gaplen +
	    len;

	memcpy(m->m_data, &frmhdr.an_whdr, sizeof(struct ieee80211_frame));
	CSR_WRITE_2(sc, AN_EVENT_ACK, AN_EV_RX);

#if NBPFILTER > 0
	if (sc->sc_drvbpf) {
		struct mbuf mb;
		struct an_rx_radiotap_header *tap = &sc->sc_rxtap;

		tap->ar_rate = frmhdr.an_rx_rate;
		tap->ar_antsignal = frmhdr.an_rx_signal_strength;
		tap->ar_chan_freq = ic->ic_bss->ni_chan->ic_freq;
		tap->ar_chan_flags = ic->ic_bss->ni_chan->ic_flags;


		mb.m_data = (caddr_t)tap;
		mb.m_len = sizeof(sc->sc_rxtapu);
		mb.m_next = m;
		mb.m_nextpkt = NULL;
		mb.m_type = 0;
		mb.m_flags = 0;
		bpf_mtap(sc->sc_drvbpf, &mb, BPF_DIRECTION_IN);
	}
#endif /* NBPFILTER > 0 */

	wh = mtod(m, struct ieee80211_frame *);
	rxi.rxi_flags = 0;
	if (wh->i_fc[1] & IEEE80211_FC1_WEP) {
		/*
		 * WEP is decrypted by hardware. Clear WEP bit
		 * header for ieee80211_input().
		 */
		wh->i_fc[1] &= ~IEEE80211_FC1_WEP;

		rxi.rxi_flags |= IEEE80211_RXI_HWDEC;
	}

	ni = ieee80211_find_rxnode(ic, wh);
	rxi.rxi_rssi = frmhdr.an_rx_signal_strength;
	rxi.rxi_tstamp = an_switch32(frmhdr.an_rx_time);
	ieee80211_input(ifp, m, ni, &rxi);
	ieee80211_release_node(ic, ni);
}
Example #6
0
/*
 * This function is called for each frame received on the high priority queue.
 * If the hardware has classified this frame as a UAPSD trigger, we locate the node
 * and deliver data.
 * For non-trigger frames, we check for PM transition.
 * Called from interrupt context.
 */
void
ath_net80211_uapsd_deliverdata(ieee80211_handle_t        ieee,
                               struct ieee80211_qosframe *qwh,
                               u_int16_t                 keyix,
                               u_int8_t                  is_trig,
                               bool                      isr_context)
{
    struct ieee80211com          *ic = NET80211_HANDLE(ieee);
    struct ath_softc_net80211    *scn = ATH_SOFTC_NET80211(ic);
    struct ieee80211_node        *ni;
    int                          tid, ac;
    u_int16_t                    frame_seq;
    int                          queue_depth;
    bool                         sent_eosp = false;

    UNREFERENCED_PARAMETER(isr_context);

    /*
     * Locate the node for sender
     */
    IEEE80211_KEYMAP_LOCK(scn);
    ni = (keyix != HAL_RXKEYIX_INVALID) ? scn->sc_keyixmap[keyix] : NULL;
    IEEE80211_KEYMAP_UNLOCK(scn);
    if (ni == NULL) {
        /*
         * No key index or no entry, do a lookup
         */
        ni = ieee80211_find_rxnode(ic, (struct ieee80211_frame_min *)qwh);
        if (ni == NULL) {
            return;
        }
    } else {
        ieee80211_ref_node(ni);
    }

    if (!(ni->ni_flags & IEEE80211_NODE_UAPSD) || (ni->ni_flags & IEEE80211_NODE_ATH_PAUSED))
        goto end;

    /* We cannot have a PM state change if this is a trigger frame */
    if (!is_trig)
    {
        /*
         * Must deal with change of state here, since otherwise there would
         * be a race (on two quick frames from STA) between this code and the
         * tasklet where we would:
         *   - miss a trigger on entry to PS if we're already trigger hunting
         *   - generate spurious SP on exit (due to frame following exit frame)
         */
        if ((((qwh->i_fc[1] & IEEE80211_FC1_PWR_MGT) == IEEE80211_FC1_PWR_MGT) ^
            ((ni->ni_flags & IEEE80211_NODE_UAPSD_TRIG) == IEEE80211_NODE_UAPSD_TRIG)))
        {
            ni->ni_flags &= ~IEEE80211_NODE_UAPSD_SP;

            if (qwh->i_fc[1] & IEEE80211_FC1_PWR_MGT) {
                WME_UAPSD_NODE_TRIGSEQINIT(ni);
                ni->ni_stats.ns_uapsd_triggerenabled++;
                ni->ni_flags |= IEEE80211_NODE_UAPSD_TRIG;
            } else {
                /*
                 * Node transitioned from UAPSD -> Active state. Flush out UAPSD frames
                 */
                ni->ni_stats.ns_uapsd_active++;
                ni->ni_flags &= ~IEEE80211_NODE_UAPSD_TRIG;
                scn->sc_ops->process_uapsd_trigger(scn->sc_dev,
                                                   ATH_NODE_NET80211(ni)->an_sta,
                                                   WME_UAPSD_NODE_MAXQDEPTH, 0, 1, &sent_eosp, WME_UAPSD_NODE_MAXQDEPTH);
            }

            goto end;
        }
    } else {  /* Is UAPSD trigger */
        tid = qwh->i_qos[0] & IEEE80211_QOS_TID;
        ac = TID_TO_WME_AC(tid);

        if (WME_UAPSD_AC_CAN_TRIGGER(ac, ni)) {
            /*
             * Detect duplicate triggers and drop if so.
             */
            frame_seq = le16toh(*(u_int16_t *)qwh->i_seq);
            if ((qwh->i_fc[1] & IEEE80211_FC1_RETRY) &&
                frame_seq == ni->ni_uapsd_trigseq[ac])
            {
                ni->ni_stats.ns_uapsd_duptriggers++;
                DPRINTF(scn, ATH_DEBUG_UAPSD, "%s : Drop duplicate trigger\n", __func__);
                goto end;
            }

            if (IEEE80211_IS_TDLS_NODE(ni)) {
            /*
                 * TDLS defines any QoS frame with EOSP
                 * set to be a non-trigger frame. Therefore,
                 * ignore trigger.
                 */
                if(qwh->i_qos[0] & IEEE80211_QOS_EOSP) {
                    ni->ni_stats.ns_uapsd_ignoretriggers++;
                    DPRINTF(scn, ATH_DEBUG_UAPSD, "%s : TDLS QOS frame with EOSP; ignore trigger\n", __func__);
                    goto end;
                }
            }

            /*
             * SP in progress for this node, discard trigger.
             */
            if (ni->ni_flags & IEEE80211_NODE_UAPSD_SP) {
                ni->ni_stats.ns_uapsd_ignoretriggers++;
                DPRINTF(scn, ATH_DEBUG_UAPSD, "%s : SP in-progress; ignore trigger\n", __func__);
                goto end;
            }

            ni->ni_stats.ns_uapsd_triggers++;

            DPRINTF(scn, ATH_DEBUG_UAPSD, "%s : Start SP\n", __func__);

            queue_depth = scn->sc_ops->process_uapsd_trigger(scn->sc_dev,
                                               ATH_NODE_NET80211(ni)->an_sta,
                                               ni->ni_uapsd_maxsp, ac, 0, &sent_eosp, WME_UAPSD_NODE_MAXQDEPTH);
            if (queue_depth == -1)
                goto end;

            /* start the SP */
            ni->ni_flags |= IEEE80211_NODE_UAPSD_SP;
            ni->ni_uapsd_trigseq[ac] = frame_seq;

            if (IEEE80211_IS_TDLS_NODE(ni)) {
                if (sent_eosp) {
                    ni->ni_flags &= ~IEEE80211_NODE_UAPSD_SP;
                    DPRINTF(scn, ATH_DEBUG_UAPSD, "%s : TDLS; End SP\n", __func__);
                }
            }
            else {
            if (!queue_depth &&
                (ni->ni_vap->iv_set_tim != NULL) &&
                IEEE80211_NODE_UAPSD_USETIM(ni))
            {
                ni->ni_vap->iv_set_tim(ni, 0, isr_context);
            }
            }
        }
    }
end:
    ieee80211_free_node(ni);
    return;
}