/*
* PANid, channel, beacon_order = 15, superframe_order = 15,
* PAN_coordinator, battery_life_extension = 0,
* coord_realignment = 0, security_enable = 0
*/
static int ieee802154_start_req(struct sk_buff *skb, struct genl_info *info)
{
struct net_device *dev;
struct ieee802154_addr addr;
u8 channel, bcn_ord, sf_ord;
u8 page;
int pan_coord, blx, coord_realign;
int ret = -EOPNOTSUPP;
if (!info->attrs[IEEE802154_ATTR_COORD_PAN_ID] ||
!info->attrs[IEEE802154_ATTR_COORD_SHORT_ADDR] ||
!info->attrs[IEEE802154_ATTR_CHANNEL] ||
!info->attrs[IEEE802154_ATTR_BCN_ORD] ||
!info->attrs[IEEE802154_ATTR_SF_ORD] ||
!info->attrs[IEEE802154_ATTR_PAN_COORD] ||
!info->attrs[IEEE802154_ATTR_BAT_EXT] ||
!info->attrs[IEEE802154_ATTR_COORD_REALIGN]
)
return -EINVAL;
dev = ieee802154_nl_get_dev(info);
if (!dev)
return -ENODEV;
if (!ieee802154_mlme_ops(dev)->start_req)
goto out;
addr.addr_type = IEEE802154_ADDR_SHORT;
addr.short_addr = nla_get_u16(
info->attrs[IEEE802154_ATTR_COORD_SHORT_ADDR]);
addr.pan_id = nla_get_u16(info->attrs[IEEE802154_ATTR_COORD_PAN_ID]);
channel = nla_get_u8(info->attrs[IEEE802154_ATTR_CHANNEL]);
bcn_ord = nla_get_u8(info->attrs[IEEE802154_ATTR_BCN_ORD]);
sf_ord = nla_get_u8(info->attrs[IEEE802154_ATTR_SF_ORD]);
pan_coord = nla_get_u8(info->attrs[IEEE802154_ATTR_PAN_COORD]);
blx = nla_get_u8(info->attrs[IEEE802154_ATTR_BAT_EXT]);
coord_realign = nla_get_u8(info->attrs[IEEE802154_ATTR_COORD_REALIGN]);
if (info->attrs[IEEE802154_ATTR_PAGE])
page = nla_get_u8(info->attrs[IEEE802154_ATTR_PAGE]);
else
page = 0;
if (addr.short_addr == IEEE802154_ADDR_BROADCAST) {
ieee802154_nl_start_confirm(dev, IEEE802154_NO_SHORT_ADDRESS);
dev_put(dev);
return -EINVAL;
}
ret = ieee802154_mlme_ops(dev)->start_req(dev, &addr, channel, page,
bcn_ord, sf_ord, pan_coord, blx, coord_realign);
out:
dev_put(dev);
return ret;
}
/**
* xbee_start_req - Start an IEEE 802.15.4 PAN.
* @dev: The network device on which to start the PAN.
* @addr: The coordinator address to use when starting the PAN.
* @channel: The channel on which to start the PAN.
* @bcn_ord: Beacon order.
* @sf_ord: Superframe order.
* @pan_coord: Whether or not we are the PAN coordinator or just
* requesting a realignment perhaps?
* @blx: Battery Life Extension feature bitfield.
* @coord_realign: Something to realign something else.
*
* If pan_coord is non-zero then this starts a network with the
* provided parameters, otherwise it attempts a coordinator
* realignment of the stated network instead.
*
* Note: This is in section 7.5.2.3 of the IEEE 802.15.4-2006
* document, with 7.3.8 describing coordinator realignment.
*/
static int xbee_start_req(struct net_device *dev, struct ieee802154_addr *addr,
u8 channel, u8 page,
u8 bcn_ord, u8 sf_ord, u8 pan_coord, u8 blx,
u8 coord_realign)
{
struct wpan_phy *phy = xbee_to_phy(dev);
mutex_lock(&phy->pib_lock);
phy->current_channel = channel;
phy->current_page = page;
mutex_unlock(&phy->pib_lock);
/* We don't emulate beacons here at all, so START should fail */
ieee802154_nl_start_confirm(dev, IEEE802154_INVALID_PARAMETER);
return 0;
}
static int mac802154_mlme_start_req(struct net_device *dev,
struct ieee802154_addr *addr,
u8 channel, u8 page,
u8 bcn_ord, u8 sf_ord,
u8 pan_coord, u8 blx,
u8 coord_realign)
{
BUG_ON(addr->mode != IEEE802154_ADDR_SHORT);
mac802154_dev_set_pan_id(dev, addr->pan_id);
mac802154_dev_set_short_addr(dev, addr->short_addr);
mac802154_dev_set_ieee_addr(dev);
mac802154_dev_set_page_channel(dev, page, channel);
/* FIXME: add validation for unused parameters to be sane
* for SoftMAC
*/
ieee802154_nl_start_confirm(dev, IEEE802154_SUCCESS);
return 0;
}
/* PANid, channel, beacon_order = 15, superframe_order = 15,
* PAN_coordinator, battery_life_extension = 0,
* coord_realignment = 0, security_enable = 0
*/
int ieee802154_start_req(struct sk_buff *skb, struct genl_info *info)
{
struct net_device *dev;
struct ieee802154_addr addr;
u8 channel, bcn_ord, sf_ord;
u8 page;
int pan_coord, blx, coord_realign;
int ret = -EBUSY;
if (!info->attrs[IEEE802154_ATTR_COORD_PAN_ID] ||
!info->attrs[IEEE802154_ATTR_COORD_SHORT_ADDR] ||
!info->attrs[IEEE802154_ATTR_CHANNEL] ||
!info->attrs[IEEE802154_ATTR_BCN_ORD] ||
!info->attrs[IEEE802154_ATTR_SF_ORD] ||
!info->attrs[IEEE802154_ATTR_PAN_COORD] ||
!info->attrs[IEEE802154_ATTR_BAT_EXT] ||
!info->attrs[IEEE802154_ATTR_COORD_REALIGN]
)
return -EINVAL;
dev = ieee802154_nl_get_dev(info);
if (!dev)
return -ENODEV;
if (netif_running(dev))
goto out;
if (!ieee802154_mlme_ops(dev)->start_req) {
ret = -EOPNOTSUPP;
goto out;
}
addr.mode = IEEE802154_ADDR_SHORT;
addr.short_addr = nla_get_shortaddr(
info->attrs[IEEE802154_ATTR_COORD_SHORT_ADDR]);
addr.pan_id = nla_get_shortaddr(
info->attrs[IEEE802154_ATTR_COORD_PAN_ID]);
channel = nla_get_u8(info->attrs[IEEE802154_ATTR_CHANNEL]);
bcn_ord = nla_get_u8(info->attrs[IEEE802154_ATTR_BCN_ORD]);
sf_ord = nla_get_u8(info->attrs[IEEE802154_ATTR_SF_ORD]);
pan_coord = nla_get_u8(info->attrs[IEEE802154_ATTR_PAN_COORD]);
blx = nla_get_u8(info->attrs[IEEE802154_ATTR_BAT_EXT]);
coord_realign = nla_get_u8(info->attrs[IEEE802154_ATTR_COORD_REALIGN]);
if (info->attrs[IEEE802154_ATTR_PAGE])
page = nla_get_u8(info->attrs[IEEE802154_ATTR_PAGE]);
else
page = 0;
if (addr.short_addr == cpu_to_le16(IEEE802154_ADDR_BROADCAST)) {
ieee802154_nl_start_confirm(dev, IEEE802154_NO_SHORT_ADDRESS);
dev_put(dev);
return -EINVAL;
}
rtnl_lock();
ret = ieee802154_mlme_ops(dev)->start_req(dev, &addr, channel, page,
bcn_ord, sf_ord, pan_coord, blx, coord_realign);
rtnl_unlock();
/* FIXME: add validation for unused parameters to be sane
* for SoftMAC
*/
ieee802154_nl_start_confirm(dev, IEEE802154_SUCCESS);
out:
dev_put(dev);
return ret;
}
