static int do_client(CLI *c) {
int result;
if(init_local(c))
return -1;
if(!options.option.client && !c->opt->protocol) {
/* Server mode and no protocol negotiation needed */
if(init_ssl(c))
return -1;
if(init_remote(c))
return -1;
} else {
if(init_remote(c))
return -1;
if(negotiate(c)<0) {
s_log(LOG_ERR, "Protocol negotiations failed");
return -1;
}
if(init_ssl(c))
return -1;
}
result=transfer(c);
s_log(LOG_NOTICE,
"Connection %s: %d bytes sent to SSL, %d bytes sent to socket",
result ? "reset" : "closed", c->ssl_bytes, c->sock_bytes);
return result;
}
static void client_try(CLI * c)
{
init_local(c);
if (!c->opt->option.client) {
init_ssl(c);
init_remote(c);
} else {
init_remote(c);
init_ssl(c);
}
transfer(c);
}
static void do_client(CLI *c) {
init_local(c);
if(!c->opt->option.client && !c->opt->protocol) {
/* server mode and no protocol negotiation needed */
init_ssl(c);
init_remote(c);
} else {
init_remote(c);
negotiate(c);
init_ssl(c);
}
transfer(c);
}
static void client_try(CLI *c) {
init_local(c);
if(!c->opt->option.client && c->opt->protocol<0) {
/* server mode and no protocol negotiation needed */
init_ssl(c);
init_remote(c);
} else {
protocol(c, PROTOCOL_PRE_CONNECT);
init_remote(c);
protocol(c, PROTOCOL_PRE_SSL);
init_ssl(c);
protocol(c, PROTOCOL_POST_SSL);
}
transfer(c);
}
int main(int argc, char **argv)
{
open_log();
char *d = xmalloc(100);
time_t t = time(NULL);
struct tm *tmp = localtime(&t);
strftime(d, 99, "%c", tmp);
log_msg("BEGIN LOG rs-mount %s", d);
free(d);
struct fuse_args args = FUSE_ARGS_INIT(argc, argv);
memset(&RS_CONFIG, 0, sizeof(struct rs_config));
fuse_opt_parse(&args, &RS_CONFIG, rs_opts, NULL);
REQUIRE_OPTION(base_url);
REQUIRE_OPTION(token);
RS_CONFIG.base_url_len = strlen(RS_CONFIG.base_url);
RS_CONFIG.auth_header = xmalloc(strlen(RS_CONFIG.token) + 23);
sprintf(RS_CONFIG.auth_header, "Authorization: Bearer %s", RS_CONFIG.token);
curl_global_init(CURL_GLOBAL_ALL);
init_remote();
atexit(cleanup);
return fuse_main(args.argc, args.argv, &rs_ops, NULL);
}
NOEXPORT void client_try(CLI *c) {
init_local(c);
if(!c->opt->option.client && c->opt->protocol<0
#ifndef OPENSSL_NO_TLSEXT
&& !c->opt->servername_list_head
#endif
) {
/* server mode and no protocol negotiation needed */
init_ssl(c);
init_remote(c);
} else { /* client mode or protocol negotiation enabled */
protocol(c, PROTOCOL_PRE_CONNECT);
init_remote(c);
protocol(c, PROTOCOL_PRE_SSL);
init_ssl(c);
protocol(c, PROTOCOL_POST_SSL);
}
transfer(c);
}
/*
========================================================================
main: This is the main entry point for the VirtualT application.
========================================================================
*/
int main(int argc, char **argv)
{
if (process_args(argc, argv)) /* Parse command line args */
return 1;
setup_working_path(argv); /* Create a working dir path */
setup_unix_signals(); /* Setup Unix signal handling */
// Added by JV for prefs
init_pref(); /* load user Menu preferences */
check_installation(); /* Test if install needs to be performed */
load_setup_preferences(); /* Load user Peripheral setup preferences */
load_memory_preferences(); /* Load user Memory setup preferences */
load_remote_preferences(); /* Load user Remote Socket preferences */
/* Perform initialization */
init_mem(); /* Initialize Memory */
init_io(); /* Initialize I/O structures */
init_sound(); /* Initialize Sound system */
init_display(); /* Initialize the Display */
init_cpu(); /* Initialize the CPU */
init_throttle_timer(); /* Initialize the throttle timer */
init_remote(); /* Initialize the remote control */
init_lpt(); /* Initialize the printer subsystem */
init_other_windows(); /* Initialize other windows that were opened (memedit, regs, etc. */
get_model_time(); /* Load the emulated time for current model */
/* Perform Emulation */
emulate(); /* Main emulation loop */
/* Save RAM contents after emulation */
save_ram();
save_model_time(); /* Save the emulated time */
/* Cleanup */
deinit_io(); /* Deinitialize I/O */
deinit_sound(); /* Deinitialize sound */
deinit_lpt(); /* Deinitialize the printer */
deinit_throttle_timer(); /* Deinitialize the throttle timer */
deinit_display(); /* Deinitialze and free the main window */
free_mem(); /* Free memory used by ReMem and/or Rampac */
return 0;
}
int main(int argc, char **argv)
{
t_zc zc;
t_remote remote;
kikoo_header();
if (argc != 3)
exit(printf("Usage: %s [host] [port]\n", argv[0]));
if (init_zappy(&zc, argv[1], atoi(argv[2])) == RET_FAILURE ||
init_remote(&remote, &zc) == RET_FAILURE)
{
remote_dtor(&remote);
zc_dtor(&zc);
return (EXIT_FAILURE);
}
zc_main(&zc);
zc_dtor(&zc);
remote_dtor(&remote);
return (EXIT_SUCCESS);
}
bool
SCI_Transporter::connect_server_impl(NDB_SOCKET_TYPE sockfd)
{
SocketOutputStream s_output(sockfd);
SocketInputStream s_input(sockfd);
char buf[256];
DBUG_ENTER("SCI_Transporter::connect_server_impl");
if (!init_local()) {
NDB_CLOSE_SOCKET(sockfd);
DBUG_RETURN(false);
}
// Send ok to client
s_output.println("sci server 1 ok");
// Wait for ok from client
if (s_input.gets(buf, 256) == 0) {
DBUG_PRINT("error", ("No response from client in SCI"));
NDB_CLOSE_SOCKET(sockfd);
DBUG_RETURN(false);
}
if (!init_remote()) {
NDB_CLOSE_SOCKET(sockfd);
DBUG_RETURN(false);
}
// Send ok to client
s_output.println("sci server 2 ok");
// Wait for ok from client
if (s_input.gets(buf, 256) == 0) {
DBUG_PRINT("error", ("No second response from client in SCI"));
NDB_CLOSE_SOCKET(sockfd);
DBUG_RETURN(false);
}
NDB_CLOSE_SOCKET(sockfd);
DBUG_PRINT("info", ("Successfully connected server to node %d",
remoteNodeId));
DBUG_RETURN(true);
}
void
hastd_secondary(struct hast_resource *res, struct nv *nvin)
{
sigset_t mask;
pthread_t td;
pid_t pid;
int error, mode, debuglevel;
/*
* Create communication channel between parent and child.
*/
if (proto_client(NULL, "socketpair://", &res->hr_ctrl) < 0) {
KEEP_ERRNO((void)pidfile_remove(pfh));
pjdlog_exit(EX_OSERR,
"Unable to create control sockets between parent and child");
}
/*
* Create communication channel between child and parent.
*/
if (proto_client(NULL, "socketpair://", &res->hr_event) < 0) {
KEEP_ERRNO((void)pidfile_remove(pfh));
pjdlog_exit(EX_OSERR,
"Unable to create event sockets between child and parent");
}
pid = fork();
if (pid < 0) {
KEEP_ERRNO((void)pidfile_remove(pfh));
pjdlog_exit(EX_OSERR, "Unable to fork");
}
if (pid > 0) {
/* This is parent. */
proto_close(res->hr_remotein);
res->hr_remotein = NULL;
proto_close(res->hr_remoteout);
res->hr_remoteout = NULL;
/* Declare that we are receiver. */
proto_recv(res->hr_event, NULL, 0);
/* Declare that we are sender. */
proto_send(res->hr_ctrl, NULL, 0);
res->hr_workerpid = pid;
return;
}
gres = res;
mode = pjdlog_mode_get();
debuglevel = pjdlog_debug_get();
/* Declare that we are sender. */
proto_send(res->hr_event, NULL, 0);
/* Declare that we are receiver. */
proto_recv(res->hr_ctrl, NULL, 0);
descriptors_cleanup(res);
descriptors_assert(res, mode);
pjdlog_init(mode);
pjdlog_debug_set(debuglevel);
pjdlog_prefix_set("[%s] (%s) ", res->hr_name, role2str(res->hr_role));
setproctitle("%s (%s)", res->hr_name, role2str(res->hr_role));
PJDLOG_VERIFY(sigemptyset(&mask) == 0);
PJDLOG_VERIFY(sigprocmask(SIG_SETMASK, &mask, NULL) == 0);
/* Error in setting timeout is not critical, but why should it fail? */
if (proto_timeout(res->hr_remotein, 2 * HAST_KEEPALIVE) < 0)
pjdlog_errno(LOG_WARNING, "Unable to set connection timeout");
if (proto_timeout(res->hr_remoteout, res->hr_timeout) < 0)
pjdlog_errno(LOG_WARNING, "Unable to set connection timeout");
init_local(res);
init_environment();
if (drop_privs(res) != 0)
exit(EX_CONFIG);
pjdlog_info("Privileges successfully dropped.");
/*
* Create the control thread before sending any event to the parent,
* as we can deadlock when parent sends control request to worker,
* but worker has no control thread started yet, so parent waits.
* In the meantime worker sends an event to the parent, but parent
* is unable to handle the event, because it waits for control
* request response.
*/
error = pthread_create(&td, NULL, ctrl_thread, res);
PJDLOG_ASSERT(error == 0);
init_remote(res, nvin);
event_send(res, EVENT_CONNECT);
error = pthread_create(&td, NULL, recv_thread, res);
PJDLOG_ASSERT(error == 0);
error = pthread_create(&td, NULL, disk_thread, res);
PJDLOG_ASSERT(error == 0);
(void)send_thread(res);
}
static unsigned int detect_key(unsigned int suspend_from)
{
int exit_reason = 0;
unsigned int time_out = readl(AO_DEBUG_REG2);
unsigned time_out_ms = time_out*100;
unsigned *irq = (unsigned *)SECURE_TASK_SHARE_IRQ;
/* unsigned *wakeup_en = (unsigned *)SECURE_TASK_RESPONSE_WAKEUP_EN; */
/* setup wakeup resources*/
/*auto suspend: timerA 10ms resolution*/
if (time_out_ms != 0)
wakeup_timer_setup();
init_remote();
#ifdef CONFIG_CEC_WAKEUP
if (hdmi_cec_func_config & 0x1) {
remote_cec_hw_reset();
cec_node_init();
}
#endif
/* *wakeup_en = 1;*/
do {
switch (*irq) {
#ifdef CONFIG_CEC_WAKEUP
case IRQ_AO_CEC_NUM:
if (suspend_from == SYS_POWEROFF)
break;
if (cec_msg.log_addr) {
if (hdmi_cec_func_config & 0x1) {
cec_handler();
if (cec_msg.cec_power == 0x1) {
/*cec power key*/
exit_reason = CEC_WAKEUP;
break;
}
}
} else if (hdmi_cec_func_config & 0x1)
cec_node_init();
break;
#endif
case IRQ_TIMERA_NUM:
if (time_out_ms != 0)
time_out_ms--;
if (time_out_ms == 0) {
wakeup_timer_clear();
exit_reason = AUTO_WAKEUP;
}
break;
case IRQ_AO_IR_DEC_NUM:
if (remote_detect_key())
exit_reason = REMOTE_WAKEUP;
break;
default:
break;
}
*irq = 0xffffffff;
if (exit_reason)
break;
else
asm volatile("wfi");
} while (1);
return exit_reason;
}
/*
============================================================================
This routine applies the current settings in the dialog box and calls the
remote API functions to setup and teardown the socket interface. It is
called by the OK button also.
============================================================================
*/
static void cb_sockdlg_apply(Fl_Widget* w, void*)
{
int port_num = 0, listen_port;
int telnet;
int enabled;
// ==============================================
// Get Port Number & telnet flag
// ==============================================
if (sockdlg_ctrl.pPortNumber->value() != NULL)
port_num = atoi(sockdlg_ctrl.pPortNumber->value());
telnet = sockdlg_ctrl.pTelnet->value();
enabled = sockdlg_ctrl.pEnable->value();
// Test if the socket is enabled but the port is invalid
if (enabled && ((port_num <= 0) || (port_num >= 65536)))
{
fl_alert("Please provide a port number between 1 and 65535");
return;
}
// Get the remote socket status
listen_port = get_remote_listen_port();
// Test if the socket is enabled and the user want's it disabled
if (!enabled)
{
// Check if the socket is currently active and shutdown if it is
if (listen_port != 0)
deinit_remote();
}
// Test if we are enabling the socket for a different port number
if (enabled && listen_port && (listen_port != port_num))
deinit_remote();
// Set the new port parameters
set_remote_telnet(telnet);
if (enabled)
set_remote_port(port_num);
else
set_remote_port(0);
enable_remote(enabled);
// Update preferences
virtualt_prefs.set("SocketPort", port_num);
virtualt_prefs.set("SocketTelnetMode", telnet);
virtualt_prefs.set("SocketEnabled", enabled);
// Now enable the socket if the socket number is different
if (enabled && (listen_port != port_num))
{
init_remote();
}
// If the apply button was pressed, then wait a bit for the port
// status to change in the remote thread, then update the
// port status
if (w == sockdlg_ctrl.pApply)
{
SLEEP(500);
update_port_status();
}
}
static unsigned int detect_key(unsigned int suspend_from)
{
int exit_reason = 0;
unsigned int time_out = readl(AO_DEBUG_REG2);
unsigned time_out_ms = time_out*100;
unsigned char adc_key_cnt = 0;
unsigned *irq = (unsigned *)WAKEUP_SRC_IRQ_ADDR_BASE;
/* unsigned *wakeup_en = (unsigned *)SECURE_TASK_RESPONSE_WAKEUP_EN; */
/* start timer and enable adc*/
reset_ao_timera();
saradc_enable();
/* setup wakeup resources*/
/*auto suspend: timerA 10ms resolution*/
if (time_out_ms != 0)
wakeup_timer_setup();
saradc_enable();
reset_ao_timera();
init_remote();
#ifdef CONFIG_CEC_WAKEUP
if (hdmi_cec_func_config & 0x1) {
remote_cec_hw_reset();
cec_node_init();
}
#endif
/* *wakeup_en = 1;*/
do {
#ifdef CONFIG_CEC_WAKEUP
if (irq[IRQ_AO_CEC] == IRQ_AO_CEC_NUM) {
irq[IRQ_AO_CEC] = 0xFFFFFFFF;
// if (suspend_from == SYS_POWEROFF)
// continue;
if (cec_msg.log_addr) {
if (hdmi_cec_func_config & 0x1) {
cec_handler();
if (cec_msg.cec_power == 0x1) {
/*cec power key*/
exit_reason = CEC_WAKEUP;
break;
}
}
} else if (hdmi_cec_func_config & 0x1)
cec_node_init();
}
#endif
if (irq[IRQ_TIMERA] == IRQ_TIMERA_NUM) {
irq[IRQ_TIMERA] = 0xFFFFFFFF;
/*uart_puts("timera ...\n");*/
if (time_out_ms != 0)
time_out_ms--;
if (time_out_ms == 0) {
wakeup_timer_clear();
exit_reason = AUTO_WAKEUP;
}
}
if (irq[IRQ_AO_TIMERA] == IRQ_AO_TIMERA_NUM) {
irq[IRQ_AO_TIMERA] = 0xFFFFFFFF;
if (check_adc_key_resume()) {
adc_key_cnt++;
/*using variable 'adc_key_cnt' to eliminate the dithering of the key*/
if (2 == adc_key_cnt)
exit_reason = POWER_KEY_WAKEUP;
} else {
adc_key_cnt = 0;
}
}
if (irq[IRQ_AO_IR_DEC] == IRQ_AO_IR_DEC_NUM) {
irq[IRQ_AO_IR_DEC] = 0xFFFFFFFF;
if (remote_detect_key())
exit_reason = REMOTE_WAKEUP;
}
if (irq[IRQ_ETH_PHY] == IRQ_ETH_PHY_NUM) {
irq[IRQ_ETH_PHY] = 0xFFFFFFFF;
exit_reason = ETH_PHY_WAKEUP;
}
if (exit_reason)
break;
else
asm volatile("wfi");
} while (1);
restore_ao_timer();
saradc_disable();
return exit_reason;
}