Example #1
0
int
main(int ac, char **av)
{
	const char *LevelAry[] = {
		"emerg",
		"alert",
		"crit",
		"err",
		"warning",
		"notice",
		"info",
		"debug",
		"panic",
		"error",
		"warn",
		NULL
	};
	int i;

	/*
	 * parse options
	 */

	DaemonUid = getuid();

	opterr = 0;

	while ((i = getopt(ac,av,"dl:L:fbSc:s:m:M:t:")) != -1) {
		switch (i) {
			case 'l':
				{
					char *ptr;
					int j;
					ptr = optarg;
					for (j = 0; LevelAry[j]; ++j) {
						if (strncmp(ptr, LevelAry[j], strlen(LevelAry[j])) == 0) {
							break;
						}
					}
					switch(j) {
						case 0:
						case 8:
							/* #define	LOG_EMERG	0	[* system is unusable *] */
							LogLevel = LOG_EMERG;
							break;
						case 1:
							/* #define	LOG_ALERT	1	[* action must be taken immediately *] */
							LogLevel = LOG_ALERT;
							break;
						case 2:
							/* #define	LOG_CRIT	2	[* critical conditions *] */
							LogLevel = LOG_CRIT;
							break;
						case 3:
						case 9:
							/* #define	LOG_ERR		3	[* error conditions *] */
							LogLevel = LOG_ERR;
							break;
						case 4:
						case 10:
							/* #define	LOG_WARNING	4	[* warning conditions *] */
							LogLevel = LOG_WARNING;
							break;
						case 5:
							/* #define	LOG_NOTICE	5	[* normal but significant condition *] */
							LogLevel = LOG_NOTICE;
							break;
						case 6:
							/* #define	LOG_INFO	6	[* informational *] */
							LogLevel = LOG_INFO;
							break;
						case 7:
							/* #define	LOG_DEBUG	7	[* debug-level messages *] */
							LogLevel = LOG_DEBUG;
							break;
						default:
							LogLevel = atoi(optarg);
					}
				}
				break;
			case 'd':
				DebugOpt = 1;
				LogLevel = LOG_DEBUG;
				/* fall through to include f too */
			case 'f':
				ForegroundOpt = 1;
				break;
			case 'b':
				ForegroundOpt = 0;
				break;
			case 'S':			/* log through syslog */
				SyslogOpt = 1;
				break;
			case 'L':			/* use internal log formatter */
				SyslogOpt = 0;
				LogFile = optarg;
				/* if LC_TIME is defined, we use it for logging to file instead of compiled-in TIMESTAMP_FMT */
				if (getenv("LC_TIME") != NULL) {
					LogHeader = LOCALE_LOGHEADER;
				}
				break;
			case 'c':
				if (*optarg != 0) CDir = optarg;
				break;
			case 's':
				if (*optarg != 0) SCDir = optarg;
				break;
			case 't':
				if (*optarg != 0) TSDir = optarg;
				break;
			case 'M':
				if (*optarg != 0) SendMail = optarg;
				break;
			case 'm':
				if (*optarg != 0) Mailto = optarg;
				break;
			default:
				/*
				 * check for parse error
				 */
				printf("dillon's cron daemon " VERSION "\n");
				printf("crond [-s dir] [-c dir] [-t dir] [-m user@host] [-M mailer] [-S|-L [file]] [-l level] [-b|-f|-d]\n");
				printf("-s            directory of system crontabs (defaults to %s)\n", SCRONTABS);
				printf("-c            directory of per-user crontabs (defaults to %s)\n", CRONTABS);
				printf("-t            directory of timestamps (defaults to %s)\n", CRONSTAMPS);
				printf("-m user@host  where should cron output be directed? (defaults to local user)\n");
				printf("-M mailer     (defaults to %s)\n", SENDMAIL);
				printf("-S            log to syslog using identity '%s' (default)\n", LOG_IDENT);
				printf("-L file       log to specified file instead of syslog\n");
				printf("-l loglevel   log events <= this level (defaults to %s (level %d))\n", LevelAry[LOG_LEVEL], LOG_LEVEL);
				printf("-b            run in background (default)\n");
				printf("-f            run in foreground\n");
				printf("-d            run in debugging mode\n");
				exit(2);
		}
	}

	/*
	 * close stdin and stdout.
	 * close unused descriptors -  don't need.
	 * optional detach from controlling terminal
	 */

	fclose(stdin);
	fclose(stdout);

	i = open("/dev/null", O_RDWR);
	if (i < 0) {
		perror("open: /dev/null");
		exit(1);
	}
	dup2(i, 0);
	dup2(i, 1);

	/* create tempdir with permissions 0755 for cron output */
	TempDir = strdup(TMPDIR "/cron.XXXXXX");
	if (mkdtemp(TempDir) == NULL) {
		perror("mkdtemp");
		exit(1);
	}
	if (chmod(TempDir, S_IRWXU|S_IRGRP|S_IXGRP|S_IROTH|S_IXOTH)) {
		perror("chmod");
		exit(1);
	}
	if (!(TempFileFmt = concat(TempDir, "/cron.%s.%d", NULL))) {
		errno = ENOMEM;
		perror("main");
		exit(1);
	}

	if (ForegroundOpt == 0) {

		int fd;
		int pid;

		if ((pid = fork()) < 0) {
			/* fork failed */
			perror("fork");
			exit(1);
		} else if (pid > 0) {
			/* parent */
			exit(0);
		}
		/* child continues */

		/* become session leader, detach from terminal */

		if (setsid() < 0)
			perror("setsid");
		if ((fd = open("/dev/tty", O_RDWR)) >= 0) {
			ioctl(fd, TIOCNOTTY, 0);
			close(fd);
		}

		/* setup logging for backgrounded daemons */

		if (SyslogOpt) {
			/* start SIGHUP and SIGCHLD handling while stderr still open */
			initsignals();
			/* 2> /dev/null */
			fclose(stderr);
			dup2(1, 2);

			/* open syslog */
			openlog(LOG_IDENT, LOG_CONS|LOG_PID, LOG_CRON);

		} else {
			/* open logfile */
			if ((fd = open(LogFile, O_WRONLY|O_CREAT|O_APPEND, 0600)) >= 0) {
				/* start SIGHUP ignoring, SIGCHLD handling while stderr still open */
				initsignals();
				/* 2> LogFile */
				fclose(stderr);
				dup2(fd, 2);
			} else {
				int n = errno;
				fdprintf(2, "failed to open logfile '%s', reason: %s", LogFile, strerror(n));
				exit(n);
			}
		}
	} else {
		/* daemon in foreground */

		/* stay in existing session, but start a new process group */
		if (setpgid(0,0)) {
			perror("setpgid");
			exit(1);
		}

		/* stderr stays open, start SIGHUP ignoring, SIGCHLD handling */
		initsignals();
	}

	/* close all other fds, including the ones we opened as /dev/null and LogFile */
	for (i = 3; i < MAXOPEN; ++i) {
        close(i);
    }


	/*
	 * main loop - synchronize to 1 second after the minute, minimum sleep
	 *             of 1 second.
	 */

	printlogf(LOG_NOTICE,"%s " VERSION " dillon's cron daemon, started with loglevel %s\n", av[0], LevelAry[LogLevel]);
	SynchronizeDir(CDir, NULL, 1);
	SynchronizeDir(SCDir, "root", 1);
	ReadTimestamps(NULL);
	TestStartupJobs(); /* @startup jobs only run when crond is started, not when their crontab is loaded */

	{
		time_t t1 = time(NULL);
		time_t t2;
		long dt;
		short rescan = 60;
		short stime = 60;

		for (;;) {
			sleep((stime + 1) - (short)(time(NULL) % stime));

			t2 = time(NULL);
			dt = t2 - t1;

			/*
			 * The file 'cron.update' is checked to determine new cron
			 * jobs.  The directory is rescanned once an hour to deal
			 * with any screwups.
			 *
			 * check for disparity.  Disparities over an hour either way
			 * result in resynchronization.  A reverse-indexed disparity
			 * less then an hour causes us to effectively sleep until we
			 * match the original time (i.e. no re-execution of jobs that
			 * have just been run).  A forward-indexed disparity less then
			 * an hour causes intermediate jobs to be run, but only once
			 * in the worst case.
			 *
			 * when running jobs, the inequality used is greater but not
			 * equal to t1, and less then or equal to t2.
			 */

			if (--rescan == 0) {
				/*
				 * If we resynchronize while jobs are running, we'll clobber
				 * the job pids, so we won't know what's already running.
				 */
				if (CheckJobs() > 0) {
					rescan = 1;
				} else {
					rescan = 60;
					SynchronizeDir(CDir, NULL, 0);
					SynchronizeDir(SCDir, "root", 0);
					ReadTimestamps(NULL);
				}
			} else {
				CheckUpdates(CDir, NULL, t1, t2);
				CheckUpdates(SCDir, "root", t1, t2);
			}
			if (DebugOpt)
				printlogf(LOG_DEBUG, "Wakeup dt=%d\n", dt);
			if (dt < -60*60 || dt > 60*60) {
				t1 = t2;
				printlogf(LOG_NOTICE,"time disparity of %d minutes detected\n", dt / 60);
			} else if (dt > 0) {
				TestJobs(t1, t2);
				RunJobs();
				sleep(5);
				if (CheckJobs() > 0)
					stime = 10;
				else
					stime = 60;
				t1 = t2;
			}
		}
	}
	/* not reached */
}
Example #2
0
int main(int argc, char *argv[]) {
	int timestamp = time(NULL);
	if(argc >= 2) {
		if(argv[1][0] == 'r' && argc >= 3) {
			readfromfile = 1;
			timestamp = atoi(argv[2]);
		}
		if(argv[1][0] == 'w')
			writetofile = 1;
		if(argv[1][0] == 'W' || argv[1][1] == 'W')
			writetofile2 = 1;
	}
	initsignals();
	sync_init(ndongles, 16384);
	corr_init(ndongles, 32);

	buffers = malloc(ndongles * sizeof(*buffers));
	files = malloc(ndongles * sizeof(*files));
	files2 = malloc(ndongles * sizeof(*files2));
	for(di=0; di < ndongles; di++) {
		char t[32];
		buffers[di] = malloc(blocksize * sizeof(**buffers));
		if(readfromfile || writetofile) {
			sprintf(t, "d%02d_%d", di, timestamp);
			if((files[di] = fopen(t, readfromfile ? "rb" : "wb")) == NULL) {
				fprintf(stderr, "Could not open file\n");
				goto fail;
			}
		}
		if(writetofile2) {
			sprintf(t, "c%02d_%d", di, timestamp);
			if((files2[di] = fopen(t, "wb")) == NULL) {
				fprintf(stderr, "Could not open file2\n");
				goto fail;
			}
		}
	}
	if(readfromfile) {
		for(;;) {
			for(di = 0; di < ndongles; di++) {
				if(fread(buffers[di], blocksize, 1, files[di]) == 0)
					goto fail;
			}
			dodsp(blocksize, (void**)buffers);
		}
	} else {
		int donglesok = coherent_init(ndongles, 2400000, 434e6, 300);

		if(donglesok == ndongles) {
			while(do_exit == 0) {
				if(coherent_read(blocksize, buffers) == -1) break;
				dodsp(blocksize, (void**)buffers);
				if(writetofile) {
					for(di = 0; di < ndongles; di++) {
						fwrite(buffers[di], blocksize, 1, files[di]);
					}
				}
			}
		}

		coherent_exit();
	}
	fail:
	sync_exit();
	return 0;
}
Example #3
0
File: ble.c Project: dhn/ble
int
main(void)
{
    switch(fork()) {
    case -1:
        die("fork\n");
        break;
    case 0:
        dev_id = hci_devid(DEV_ID);
        if (dev_id < 0) {
            die("Invalid device\n");
        } else {
            initsignals();
            close(STDIN_FILENO);
            close(STDOUT_FILENO);
            close(STDERR_FILENO);

            Display *dpy = NULL;
            int rssi, screen;
            Bool help = True;

            check_version(dev_id);
            add_to_white_list(dev_id);
            handle = connect_to_device(dev_id);
            /* encryption(dev_id, handle); */

            while (running) {
                if (help) {
                    if (!(dpy = XOpenDisplay(0)))
                        die("ble: cannot open display");

                    /* Get the number of screens in display "dpy" and blank them all. */
                    nscreens = ScreenCount(dpy);
                    locks = malloc(sizeof(Lock *) * nscreens);
                    if (locks == NULL)
                        die("ble: malloc: %s", strerror(errno));
                }

                if (help) {
                    rssi = read_rssi(dev_id, handle);
                    if ((calculate_distance(rssi) >= 2.0) && (rssi <= -71 && rssi >= -75)) {
                        if (locks != NULL && help) {
                            for (screen = 0; screen < nscreens; screen++)
                                locks[screen] = lockscreen(dpy, screen);
                            XSync(dpy, False);
                        }
                        help = False;
                    }
                }
                sleep(1);
                if (!help) {
                    rssi = read_rssi(dev_id, handle);
                    if ((calculate_distance(rssi) <= 2.0) && (rssi <= -30 && rssi >= -70)) {
                        for (screen = 0; screen < nscreens; screen++)
                            unlockscreen(dpy, locks[screen]);

                        if (locks != NULL || dpy != NULL) {
                            free(locks);
                            XCloseDisplay(dpy);
                            help = True;
                        }
                    }
                }
            }
            disconnect_from_device(dev_id, handle);
        }
    default:
        break;
    }

    return EXIT_SUCCESS;
}