void main( void )
{
errno = 0;
intr_disable();
intr_init();
hw_init();
/* print a banner */
printf( "%s %s\n", os_name, os_version );
memory_init();
device_init();
vfs_init();
/* new line after all initialisation messages */
printf("\n");
kb_init();
console_init();
intr_enable();
/* fire up the shell! */
for(;;) {
shell_start();
printf("Respawning shell\n");
}
}
/**
* The entry.
*/
int main(int argc, char *argv[], char *envp[])
{
if (ginfo->status == STATUS_DEBUG)
raise(SIGTRAP);
cons_init();
const char *message = "(THU.CST) os is loading ...";
kprintf("%s\n\n", message);
intr_init();
ide_init();
host_signal_init();
/* Only to initialize lcpu_count. */
mp_init();
pmm_init();
pmm_init_ap();
vmm_init();
sched_init();
proc_init();
swap_init();
fs_init();
sync_init();
umclock_init();
cpu_idle();
host_exit(SIGINT);
return 0;
}
void nucleos_shutdown(timer_t *tp)
{
/* This function is called from prepare_shutdown or stop_sequence to bring
* down Nucleos. How to shutdown is in the argument: RBT_HALT (return to the
* monitor), RBT_MONITOR (execute given code), RBT_RESET (hard reset).
*/
arch_stop_local_timer();
intr_init(INTS_ORIG, 0);
arch_shutdown(tp ? tmr_arg(tp)->ta_int : RBT_PANIC);
}
void
cpu_configure(void)
{
intr_init();
splhigh();
if (config_rootfound("mainbus", NULL) == NULL)
panic("no mainbus found");
spl0();
}
/*
* Configure all devices on system
*/
void
cpu_configure(void)
{
intr_init();
/* Kick off autoconfiguration. */
(void)splhigh();
if (config_rootfound("mainbus", "mainbus") == NULL)
panic("no mainbus found");
(void)spl0();
}
void
cpu_configure(void)
{
/* Start configuration */
splhigh();
intr_init();
if (config_rootfound("mainbus", NULL) == NULL)
panic("no mainbus found");
/* Configuration is finished, turn on interrupts. */
spl0();
}
/*
* Determine device configuration for a machine.
*/
void
cpu_configure(void)
{
intr_init();
calc_delayconst();
/* Make sure that timers run at CPU frequency */
mtdcr(DCR_CPC0_CR1, mfdcr(DCR_CPC0_CR1) & ~CPC0_CR1_CETE);
if (config_rootfound("plb", NULL) == NULL)
panic("configure: mainbus not configured");
(void)spl0();
}
void platform_init(int argc, char **argv, char **envp, unsigned memsize) {
/* clear BSS section */
bzero(__bss, __ebss - __bss);
setup_kenv(argc, argv, envp);
uart_init();
pcpu_init();
cpu_init();
tlb_init();
intr_init();
pm_bootstrap(memsize);
thread_bootstrap();
kprintf("[startup] Switching to 'kernel-main' thread...\n");
}
/*
* Configure all devices on system
*/
void
cpu_configure(void)
{
intr_init();
/* Kick off autoconfiguration. */
if (config_rootfound("mainbus", NULL) == NULL)
panic("no mainbus found");
/*
* Hardware interrupts will be enabled in
* sys/arch/mips/mips/mips3_clockintr.c:mips3_initclocks()
* to avoid hardclock(9) by CPU INT5 before softclockintr is
* initialized in initclocks().
*/
}
/**
* This is the first real C function ever called. It performs a lot of
* hardware-specific initialization, then creates a pseudo-context to
* execute the bootstrap function in.
*/
void
kmain()
{
GDB_CALL_HOOK(boot);
dbg_init();
dbgq(DBG_CORE, "Kernel binary:\n");
dbgq(DBG_CORE, " text: 0x%p-0x%p\n", &kernel_start_text, &kernel_end_text);
dbgq(DBG_CORE, " data: 0x%p-0x%p\n", &kernel_start_data, &kernel_end_data);
dbgq(DBG_CORE, " bss: 0x%p-0x%p\n", &kernel_start_bss, &kernel_end_bss);
page_init();
pt_init();
slab_init();
pframe_init();
acpi_init();
apic_init();
pci_init();
intr_init();
gdt_init();
/* initialize slab allocators */
#ifdef __VM__
anon_init();
shadow_init();
#endif
vmmap_init();
proc_init();
kthread_init();
#ifdef __DRIVERS__
bytedev_init();
blockdev_init();
#endif
void *bstack = page_alloc();
pagedir_t *bpdir = pt_get();
KASSERT(NULL != bstack && "Ran out of memory while booting.");
context_setup(&bootstrap_context, bootstrap, 0, NULL, bstack, PAGE_SIZE, bpdir);
context_make_active(&bootstrap_context);
panic("\nReturned to kmain()!!!\n");
}
void kernel_init(void) {
console_init();
debug("Kernel: Booting");
debug("Kernel: Address 0x%08X~0x%08X, Used %d KB", _kernel_start, _kernel_end, (_kernel_end - _kernel_start + 1023) / 1024);
mm_init();
intr_init();
dev_init();
syscall_init();
process_init();
}
void main(void) {
intr_init();
init_pit();
outb(0x21, 0xf8);
outb(0xa1, 0xff);
put_irq_handler(0, keyborad_handler);
put_irq_handler(12, mouse_handler);
put_irq_handler(0, timer_handler);
kprintf("\n%s %s.%s. Copyright (c) 2013 loulanguju\n", KERNEL_NAME, KERNEL_RELEASE, KERNEL_VERSION);
kprintf("Executing in %s mode.\n\n", "32-bit protected");
while (1) {// do while
}
return ;
}
/*===========================================================================*
* shutdown *
*===========================================================================*/
PUBLIC void minix_shutdown(timer_t *tp)
{
/* This function is called from prepare_shutdown or stop_sequence to bring
* down MINIX. How to shutdown is in the argument: RBT_HALT (return to the
* monitor), RBT_MONITOR (execute given code), RBT_RESET (hard reset).
*/
#ifdef CONFIG_SMP
/*
* FIXME
*
* we will need to stop timers on all cpus if SMP is enabled and put them in
* such a state that we can perform the whole boot process once restarted from
* monitor again
*/
if (ncpus > 1)
smp_shutdown_aps();
#endif
hw_intr_disable_all();
stop_local_timer();
intr_init(INTS_ORIG, 0);
arch_shutdown(tp ? tmr_arg(tp)->ta_int : RBT_PANIC);
}
/*
* Determine device configuration for a machine.
*/
void
cpu_configure(void)
{
intr_init();
calc_delayconst();
/* Make sure that timers run at CPU frequency */
mtdcr(DCR_CPC0_CR1, mfdcr(DCR_CPC0_CR1) & ~CPC0_CR1_CETE);
if (config_rootfound("plb", &local_plb_devs) == NULL)
panic("configure: plb not configured");
printf("biomask %x netmask %x ttymask %x\n", (u_short)imask[IPL_BIO],
(u_short)imask[IPL_NET], (u_short)imask[IPL_TTY]);
(void)spl0();
/*
* Now allow hardware interrupts.
*/
asm volatile ("wrteei 1");
}
/*
* Machine-dependent startup code
*/
void
cpu_startup()
{
#ifdef DEBUG
extern int pmapdebug;
int opmapdebug = pmapdebug;
#endif
vaddr_t minaddr, maxaddr;
extern struct user *proc0paddr;
#ifdef DEBUG
pmapdebug = 0;
#endif
/*
* fix message buffer mapping
*/
pmap_map(MSGBUF_VA, MSGBUF_PA, MSGBUF_PA + MSGBUFSIZE, UVM_PROT_RW);
initmsgbuf((caddr_t)(MSGBUF_VA + (CPU_ISSUN4 ? 4096 : 0)), MSGBUFSIZE);
proc0.p_addr = proc0paddr;
/* I would print this earlier, but I want it in the message buffer */
if (kap_maskcheck() == 0) {
printf("WARNING: KAP M2C3 or earlier mask detected.\n"
"THE PROCESSOR IN THIS MACHINE SUFFERS FROM SEVERE HARDWARE ISSUES.\n"
"M2C3 PROCESSORS MAY RUN RELIABLY ENOUGH, OLDER WILL DEFINITELY NOT.\n\n");
}
/*
* Good {morning,afternoon,evening,night}.
*/
printf(version);
/*identifycpu();*/
printf("real mem = %d (%dMB)\n", ptoa(physmem),
ptoa(physmem) / 1024 / 1024);
/*
* Allocate a submap for exec arguments. This map effectively
* limits the number of processes exec'ing at any time.
*/
minaddr = vm_map_min(kernel_map);
exec_map = uvm_km_suballoc(kernel_map, &minaddr, &maxaddr,
16*NCARGS, VM_MAP_PAGEABLE, FALSE, NULL);
/*
* Allocate a map for physio. Others use a submap of the kernel
* map, but we want one completely separate, even though it uses
* the same pmap.
*/
dvma_base = CPU_ISSUN4M ? DVMA4M_BASE : DVMA_BASE;
dvma_end = CPU_ISSUN4M ? DVMA4M_END : DVMA_END;
phys_map = uvm_map_create(pmap_kernel(), dvma_base, dvma_end,
VM_MAP_INTRSAFE);
if (phys_map == NULL)
panic("unable to create DVMA map");
/*
* Allocate DVMA space and dump into a privately managed
* resource map for double mappings which is usable from
* interrupt contexts.
*/
if (uvm_km_valloc_wait(phys_map, (dvma_end-dvma_base)) != dvma_base)
panic("unable to allocate from DVMA map");
dvmamap_extent = extent_create("dvmamap", dvma_base, dvma_end,
M_DEVBUF, NULL, 0, EX_NOWAIT);
if (dvmamap_extent == 0)
panic("unable to allocate extent for dvma");
#ifdef DEBUG
pmapdebug = opmapdebug;
#endif
printf("avail mem = %lu (%luMB)\n", ptoa(uvmexp.free),
ptoa(uvmexp.free) / 1024 / 1024);
/*
* Set up buffers, so they can be used to read disk labels.
*/
bufinit();
/* Early interrupt handlers initialization */
intr_init();
}
/**
* This is the first real C function ever called. It performs a lot of
* hardware-specific initialization, then creates a pseudo-context to
* execute the bootstrap function in.
*/
void
kmain()
{
GDB_CALL_HOOK(boot);
dbg_init();
dbgq(DBG_CORE, "Kernel binary:\n");
dbgq(DBG_CORE, " text: 0x%p-0x%p\n", &kernel_start_text, &kernel_end_text);
dbgq(DBG_CORE, " data: 0x%p-0x%p\n", &kernel_start_data, &kernel_end_data);
dbgq(DBG_CORE, " bss: 0x%p-0x%p\n", &kernel_start_bss, &kernel_end_bss);
page_init();
pt_init();
slab_init();
pframe_init();
acpi_init();
apic_init();
pci_init();
intr_init();
gdt_init();
/* initialize slab allocators */
#ifdef __VM__
anon_init();
shadow_init();
#endif
vmmap_init();
proc_init();
kthread_init();
#ifdef __DRIVERS__
bytedev_init();
blockdev_init();
#endif
void *bstack = page_alloc();
pagedir_t *bpdir = pt_get();
KASSERT(NULL != bstack && "Ran out of memory while booting.");
/* This little loop gives gdb a place to synch up with weenix. In the
* past the weenix command started qemu was started with -S which
* allowed gdb to connect and start before the boot loader ran, but
* since then a bug has appeared where breakpoints fail if gdb connects
* before the boot loader runs. See
*
* https://bugs.launchpad.net/qemu/+bug/526653
*
* This loop (along with an additional command in init.gdb setting
* gdb_wait to 0) sticks weenix at a known place so gdb can join a
* running weenix, set gdb_wait to zero and catch the breakpoint in
* bootstrap below. See Config.mk for how to set GDBWAIT correctly.
*
* DANGER: if GDBWAIT != 0, and gdb is not running, this loop will never
* exit and weenix will not run. Make SURE the GDBWAIT is set the way
* you expect.
*/
while (gdb_wait) ;
context_setup(&bootstrap_context, bootstrap, 0, NULL, bstack, PAGE_SIZE, bpdir);
context_make_active(&bootstrap_context);
panic("\nReturned to kmain()!!!\n");
}
/*===========================================================================*
* cstart *
*===========================================================================*/
void cstart()
{
/* Perform system initializations prior to calling main(). Most settings are
* determined with help of the environment strings passed by MINIX' loader.
*/
register char *value; /* value in key=value pair */
int h;
/* low-level initialization */
prot_init();
/* determine verbosity */
if ((value = env_get(VERBOSEBOOTVARNAME)))
verboseboot = atoi(value);
/* Get clock tick frequency. */
value = env_get("hz");
if(value)
system_hz = atoi(value);
if(!value || system_hz < 2 || system_hz > 50000) /* sanity check */
system_hz = DEFAULT_HZ;
DEBUGEXTRA(("cstart\n"));
/* Record miscellaneous information for user-space servers. */
kinfo.nr_procs = NR_PROCS;
kinfo.nr_tasks = NR_TASKS;
strlcpy(kinfo.release, OS_RELEASE, sizeof(kinfo.release));
strlcpy(kinfo.version, OS_VERSION, sizeof(kinfo.version));
/* Load average data initialization. */
kloadinfo.proc_last_slot = 0;
for(h = 0; h < _LOAD_HISTORY; h++)
kloadinfo.proc_load_history[h] = 0;
#ifdef USE_APIC
value = env_get("no_apic");
if(value)
config_no_apic = atoi(value);
else
config_no_apic = 1;
value = env_get("apic_timer_x");
if(value)
config_apic_timer_x = atoi(value);
else
config_apic_timer_x = 1;
#endif
#ifdef USE_WATCHDOG
value = env_get("watchdog");
if (value)
watchdog_enabled = atoi(value);
#endif
#ifdef CONFIG_SMP
if (config_no_apic)
config_no_smp = 1;
value = env_get("no_smp");
if(value)
config_no_smp = atoi(value);
else
config_no_smp = 0;
#endif
DEBUGEXTRA(("intr_init(0)\n"));
intr_init(0);
arch_init();
}
/*===========================================================================*
* main *
*===========================================================================*/
PUBLIC void main()
{
/* Start the ball rolling. */
struct boot_image *ip; /* boot image pointer */
register struct proc *rp; /* process pointer */
register struct priv *sp; /* privilege structure pointer */
register int i, s;
// a.out 头部数组的索引.
int hdrindex; /* index to array of a.out headers */
phys_clicks text_base;
vir_clicks text_clicks, data_clicks;
// 内核任务栈的基地址(低端)
reg_t ktsb; /* kernel task stack base */
// 用来放置 a.out 头部的一个副本.
struct exec e_hdr; /* for a copy of an a.out header */
/* Initialize the interrupt controller. */
// 初始化 8259 中断控制器芯片.
intr_init(1);
/* Clear the process table. Anounce each slot as empty and set up mappings
* for proc_addr() and proc_nr() macros. Do the same for the table with
* privilege structures for the system processes.
*/
// 初如化进程表与进程指针表.
// BEG_PROC_ADDR: 进程表地址;
for (rp = BEG_PROC_ADDR, i = -NR_TASKS; rp < END_PROC_ADDR; ++rp, ++i) {
// 将进程表中每一项都设置为空闲.
rp->p_rts_flags = SLOT_FREE; /* initialize free slot */
// 进程号, i 的初值为 -NR_TASKS, 可见系统任务拥有负的进程号
rp->p_nr = i; /* proc number from ptr */
// 建立进程数组与进程指针数组之间的映射关系
(pproc_addr + NR_TASKS)[i] = rp; /* proc ptr from number */
}
// 初始化优先级表
for (sp = BEG_PRIV_ADDR, i = 0; sp < END_PRIV_ADDR; ++sp, ++i) {
sp->s_proc_nr = NONE; /* initialize as free */
sp->s_id = i; /* priv structure index */
// 建立特权级表与特权级指针表之间的映射关系
ppriv_addr[i] = sp; /* priv ptr from number */
}
/* Set up proc table entries for tasks and servers. The stacks of the
* kernel tasks are initialized to an array in data space. The stacks
* of the servers have been added to the data segment by the monitor, so
* the stack pointer is set to the end of the data segment. All the
* processes are in low memory on the 8086. On the 386 only the kernel
* is in low memory, the rest is loaded in extended memory.
*/
/*
* 为任务和服务进程设置进程表项. 内核任务的栈被初始化成一个在数据空间中的
* 数组. 服务进程的栈已经由控制器添加到数据段中, 所有它们的栈指针开始时
* 指向数据段的末尾. 所有的进程都在 8086 的低内存. 对于 386, 只有内核在
* 低内存, 剩下的都在扩展内存中.
*/
/* Task stacks. */
/* 任务栈 */
ktsb = (reg_t) t_stack;
// 为那些包含在系统引导映像文件中的程序分配进程表项.
for (i=0; i < NR_BOOT_PROCS; ++i) {
ip = &image[i]; /* process' attributes */
// 获取进程指针
rp = proc_addr(ip->proc_nr); /* get process pointer */
// 最大调度优先级
rp->p_max_priority = ip->priority; /* max scheduling priority */
// 当前调度优先级
rp->p_priority = ip->priority; /* current priority */
// 时间片原子值
rp->p_quantum_size = ip->quantum; /* quantum size in ticks */
// 剩余时间片
rp->p_ticks_left = ip->quantum; /* current credit */
// 将程序名复制到进程表项中
strncpy(rp->p_name, ip->proc_name, P_NAME_LEN); /* set process name */
// 为进程分配一个特权级结构体, 即 从系统特权级表中分配一项
(void) get_priv(rp, (ip->flags & SYS_PROC)); /* assign structure */
// 初始化特权级结构体的标志.
priv(rp)->s_flags = ip->flags; /* process flags */
// 初始化特权级结构体的 允许的系统调用陷井
priv(rp)->s_trap_mask = ip->trap_mask; /* allowed traps */
priv(rp)->s_call_mask = ip->call_mask; /* kernel call mask */
// 初始化进程的消息发送位图
priv(rp)->s_ipc_to.chunk[0] = ip->ipc_to; /* restrict targets */
// 如果进程是内核任务
if (iskerneln(proc_nr(rp))) { /* part of the kernel? */
// 如果进程的栈大小大于 0, 设置进程的栈警戒字,
if (ip->stksize > 0) { /* HARDWARE stack size is 0 */
// 设置内核任务栈警戒字指针.
rp->p_priv->s_stack_guard = (reg_t *) ktsb;
// 指针运算符(->) 要比取值运行符 (*) 的优先级要高.
// 等价于:
// *(rp->p_priv->s_stack_guard) = STACK_GUARD
// 效果是在栈的最顶端(在低地址)放置一个特殊值,
// 这个值就是栈警戒字.
*rp->p_priv->s_stack_guard = STACK_GUARD;
}
ktsb += ip->stksize; /* point to high end of stack */
// 初始进程的栈指针
rp->p_reg.sp = ktsb; /* this task's initial stack ptr */
// kinfo ???
// 内核代码的基地址右移 CLICK_SHIFT 位, 赋给 text_base.
text_base = kinfo.code_base >> CLICK_SHIFT;
/* processes that are in the kernel */
// 内核任务使用同一个 a.out 头部信息
hdrindex = 0; /* all use the first a.out header */
} else {
// 非内核任务, 计算它的 a.out 头部数组索引, 因为 0 号项
// 留给了内核任务, 所以需 加 1.
hdrindex = 1 + i-NR_TASKS; /* servers, drivers, INIT */
}
/* The bootstrap loader created an array of the a.out headers at
* absolute address 'aout'. Get one element to e_hdr.
*/
/*
* 引导加载程序会在绝对地址 'aout' 处放置一个 a.out 头部数组.
* 从中取一项复制到 e_hdr.
*/
phys_copy(aout + hdrindex * A_MINHDR, vir2phys(&e_hdr),
(phys_bytes) A_MINHDR);
/* Convert addresses to clicks and build process memory map */
/* 将地址转换为以 click 为单位, 并建立进程内存映射 */
// 既然这里要设置 text_base, 那 146 行附近的
// text_base = kinfo.code_base >> CLICK_SHIFT;
// 岂不是多余的??
// 将 a.out 头部的符号表大小右移 CLICK_SHIFT 位,赋给 text_base.
text_base = e_hdr.a_syms >> CLICK_SHIFT;
// 计算程序文本段大小, 以 click 为单位, 上取整.
text_clicks = (e_hdr.a_text + CLICK_SIZE-1) >> CLICK_SHIFT;
// 如果 a.out 头部指明它的 I/D 是合并的 ???
if (!(e_hdr.a_flags & A_SEP)) text_clicks = 0; /* common I&D */
// 计算程序占用的内存量, 以 click 为单位, 上取整.
data_clicks = (e_hdr.a_total + CLICK_SIZE-1) >> CLICK_SHIFT;
// 初始化进程的内存映射数据结构
rp->p_memmap[T].mem_phys = text_base;
rp->p_memmap[T].mem_len = text_clicks;
rp->p_memmap[D].mem_phys = text_base + text_clicks;
rp->p_memmap[D].mem_len = data_clicks;
rp->p_memmap[S].mem_phys = text_base + text_clicks + data_clicks;
rp->p_memmap[S].mem_vir = data_clicks; /* empty - stack is in data */
/* Set initial register values. The processor status word for tasks
* is different from that of other processes because tasks can
* access I/O; this is not allowed to less-privileged processes
*/
/*
* 设置寄存器的初始值. 与其他进程相比, 内核任务的处理器状态字
* 稍有不同, 因为内核任务可以访问 I/O; 而对于非特权进来来说, 这是不
* 允许的.
*/
// 初始化进程的 PC 和 processor status word.
rp->p_reg.pc = (reg_t) ip->initial_pc;
rp->p_reg.psw = (iskernelp(rp)) ? INIT_TASK_PSW : INIT_PSW;
/* Initialize the server stack pointer. Take it down one word
* to give crtso.s something to use as "argc".
*/
/*
* 初始化服务器进程的栈指针. 下移一个字的空间, 使得 crtso.s 有
* 空间放置 "argc".
*/
if (isusern(proc_nr(rp))) { /* user-space process? */
rp->p_reg.sp = (rp->p_memmap[S].mem_vir +
rp->p_memmap[S].mem_len) << CLICK_SHIFT;
rp->p_reg.sp -= sizeof(reg_t);
}
/* Set ready. The HARDWARE task is never ready. */
if (rp->p_nr != HARDWARE) {
// 如果进程不是 HARDWARE, 清空进程标志, 并加入调度队列.
rp->p_rts_flags = 0; /* runnable if no flags */
lock_enqueue(rp); /* add to scheduling queues */
} else {
// 对于 HARDWARE 任务, 则阻止其运行. ???
rp->p_rts_flags = NO_MAP; /* prevent from running */
}
/* Code and data segments must be allocated in protected mode. */
/* 数据与代码段必须在保护模式下分配 */
alloc_segments(rp);
}
int smd_core_platform_init(struct platform_device *pdev)
{
int i;
int ret;
uint32_t num_ss;
struct smd_platform *smd_platform_data;
struct smd_subsystem_config *smd_ss_config_list;
struct smd_subsystem_config *cfg;
struct interrupt_config *private_intr_config;
int err_ret = 0;
smd_platform_data = pdev->dev.platform_data;
num_ss = smd_platform_data->num_ss_configs;
smd_ss_config_list = smd_platform_data->smd_ss_configs;
if (smd_platform_data->smd_ssr_config)
disable_smsm_reset_handshake = smd_platform_data->
smd_ssr_config->disable_smsm_reset_handshake;
for (i = 0; i < num_ss; i++) {
cfg = &smd_ss_config_list[i];
private_intr_config = smd_get_intr_config(cfg->edge);
if (!private_intr_config) {
pr_err("%s: invalid edge\n", __func__);
goto intr_failed;
}
ret = intr_init(
&private_intr_config->smd,
&cfg->smd_int,
pdev
);
if (ret < 0) {
err_ret = ret;
pr_err("smd: register irq failed on %s\n",
cfg->smd_int.irq_name);
goto intr_failed;
}
interrupt_stats[cfg->irq_config_id].smd_interrupt_id
= cfg->smd_int.irq_id;
if (cfg->smsm_int.irq_id)
ret = intr_init(
&private_intr_config->smsm,
&cfg->smsm_int,
pdev
);
if (ret < 0) {
err_ret = ret;
pr_err("smd: register irq failed on %s\n",
cfg->smsm_int.irq_name);
goto intr_failed;
}
if (cfg->smsm_int.irq_id)
interrupt_stats[cfg->irq_config_id].smsm_interrupt_id
= cfg->smsm_int.irq_id;
if (cfg->subsys_name)
smd_set_edge_subsys_name(cfg->edge, cfg->subsys_name);
smd_set_edge_initialized(cfg->edge);
}
SMD_INFO("smd_core_platform_init() done\n");
return 0;
intr_failed:
pr_err("smd: deregistering IRQs\n");
for (i = 0; i < num_ss; ++i) {
cfg = &smd_ss_config_list[i];
if (cfg->smd_int.irq_id >= 0)
free_irq(cfg->smd_int.irq_id,
(void *)cfg->smd_int.dev_id
);
if (cfg->smsm_int.irq_id >= 0)
free_irq(cfg->smsm_int.irq_id,
(void *)cfg->smsm_int.dev_id
);
}
return err_ret;
}
/*===========================================================================*
* main *
*===========================================================================*/
PUBLIC void main()
{
/* Start the ball rolling. */
register struct proc *rp;
register int t;
int hdrindex;
phys_clicks text_base;
vir_clicks text_clicks;
vir_clicks data_clicks;
phys_bytes phys_b;
reg_t ktsb; /* kernel task stack base */
struct memory *memp;
struct tasktab *ttp;
struct exec e_hdr;
licznik_elementow = 0;
/* Initialize the interrupt controller. */
intr_init(1);
/* Interpret memory sizes. */
mem_init();
/* Clear the process table.
* Set up mappings for proc_addr() and proc_number() macros.
*/
for (rp = BEG_PROC_ADDR, t = -NR_TASKS; rp < END_PROC_ADDR; ++rp, ++t) {
rp->p_nr = t; /* proc number from ptr */
(pproc_addr + NR_TASKS)[t] = rp; /* proc ptr from number */
}
/* Resolve driver selections in the task table. */
mapdrivers();
/* Set up proc table entries for tasks and servers. The stacks of the
* kernel tasks are initialized to an array in data space. The stacks
* of the servers have been added to the data segment by the monitor, so
* the stack pointer is set to the end of the data segment. All the
* processes are in low memory on the 8086. On the 386 only the kernel
* is in low memory, the rest is loaded in extended memory.
*/
/* Task stacks. */
ktsb = (reg_t) t_stack;
for (t = -NR_TASKS; t <= LOW_USER; ++t) {
rp = proc_addr(t); /* t's process slot */
ttp = &tasktab[t + NR_TASKS]; /* t's task attributes */
strcpy(rp->p_name, ttp->name);
if (t < 0) {
if (ttp->stksize > 0) {
rp->p_stguard = (reg_t *) ktsb;
*rp->p_stguard = STACK_GUARD;
}
ktsb += ttp->stksize;
rp->p_reg.sp = ktsb;
text_base = code_base >> CLICK_SHIFT;
/* tasks are all in the kernel */
hdrindex = 0; /* and use the first a.out header */
rp->p_priority = PPRI_TASK;
} else {
hdrindex = 1 + t; /* MM, FS, INIT follow the kernel */
rp->p_priority = t < LOW_USER ? PPRI_SERVER : PPRI_USER;
}
/* The bootstrap loader has created an array of the a.out headers at
* absolute address 'aout'.
*/
phys_copy(aout + hdrindex * A_MINHDR, vir2phys(&e_hdr),
(phys_bytes) A_MINHDR);
text_base = e_hdr.a_syms >> CLICK_SHIFT;
text_clicks = (e_hdr.a_text + CLICK_SIZE-1) >> CLICK_SHIFT;
if (!(e_hdr.a_flags & A_SEP)) text_clicks = 0; /* Common I&D */
data_clicks = (e_hdr.a_total + CLICK_SIZE-1) >> CLICK_SHIFT;
rp->p_map[T].mem_phys = text_base;
rp->p_map[T].mem_len = text_clicks;
rp->p_map[D].mem_phys = text_base + text_clicks;
rp->p_map[D].mem_len = data_clicks;
rp->p_map[S].mem_phys = text_base + text_clicks + data_clicks;
rp->p_map[S].mem_vir = data_clicks; /* empty - stack is in data */
/* Remove server memory from the free memory list. The boot monitor
* promises to put processes at the start of memory chunks.
*/
for (memp = mem; memp < &mem[NR_MEMS]; memp++) {
if (memp->base == text_base) {
memp->base += text_clicks + data_clicks;
memp->size -= text_clicks + data_clicks;
}
}
/* Set initial register values. */
rp->p_reg.pc = (reg_t) ttp->initial_pc;
rp->p_reg.psw = istaskp(rp) ? INIT_TASK_PSW : INIT_PSW;
if (t >= 0) {
/* Initialize the server stack pointer. Take it down one word
* to give crtso.s something to use as "argc".
*/
rp->p_reg.sp = (rp->p_map[S].mem_vir +
rp->p_map[S].mem_len) << CLICK_SHIFT;
rp->p_reg.sp -= sizeof(reg_t);
}
if (!isidlehardware(t)) lock_ready(rp); /* IDLE, HARDWARE neveready */
rp->p_flags = 0;
alloc_segments(rp);
}
/*
* Machine-dependent startup code
*/
void
cpu_startup()
{
caddr_t v;
int sz;
#ifdef DEBUG
extern int pmapdebug;
int opmapdebug = pmapdebug;
#endif
vaddr_t minaddr, maxaddr;
extern struct user *proc0paddr;
#ifdef DEBUG
pmapdebug = 0;
#endif
if (CPU_ISSUN4M) {
extern int stackgap_random;
stackgap_random = STACKGAP_RANDOM_SUN4M;
}
/*
* fix message buffer mapping, note phys addr of msgbuf is 0
*/
pmap_map(MSGBUF_VA, 0, MSGBUFSIZE, VM_PROT_READ|VM_PROT_WRITE);
initmsgbuf((caddr_t)(MSGBUF_VA + (CPU_ISSUN4 ? 4096 : 0)), MSGBUFSIZE);
proc0.p_addr = proc0paddr;
/*
* Good {morning,afternoon,evening,night}.
*/
printf(version);
/*identifycpu();*/
printf("real mem = %u (%uMB)\n", ptoa(physmem),
ptoa(physmem)/1024/1024);
/*
* Find out how much space we need, allocate it,
* and then give everything true virtual addresses.
*/
sz = (int)allocsys((caddr_t)0);
if ((v = (caddr_t)uvm_km_alloc(kernel_map, round_page(sz))) == 0)
panic("startup: no room for tables");
if (allocsys(v) - v != sz)
panic("startup: table size inconsistency");
/*
* Determine how many buffers to allocate.
* We allocate bufcachepercent% of memory for buffer space.
*/
if (bufpages == 0)
bufpages = physmem * bufcachepercent / 100;
/* Restrict to at most 25% filled kvm */
if (bufpages >
(VM_MAX_KERNEL_ADDRESS-VM_MIN_KERNEL_ADDRESS) / PAGE_SIZE / 4)
bufpages = (VM_MAX_KERNEL_ADDRESS-VM_MIN_KERNEL_ADDRESS) /
PAGE_SIZE / 4;
/*
* Allocate a submap for exec arguments. This map effectively
* limits the number of processes exec'ing at any time.
*/
minaddr = vm_map_min(kernel_map);
exec_map = uvm_km_suballoc(kernel_map, &minaddr, &maxaddr,
16*NCARGS, VM_MAP_PAGEABLE, FALSE, NULL);
/*
* Allocate a map for physio. Others use a submap of the kernel
* map, but we want one completely separate, even though it uses
* the same pmap.
*/
dvma_base = CPU_ISSUN4M ? DVMA4M_BASE : DVMA_BASE;
dvma_end = CPU_ISSUN4M ? DVMA4M_END : DVMA_END;
#if defined(SUN4M)
if (CPU_ISSUN4M) {
/*
* The DVMA space we want partially overrides kernel_map.
* Allocate it in kernel_map as well to prevent it from being
* used for other things.
*/
if (uvm_map(kernel_map, &dvma_base,
vm_map_max(kernel_map) - dvma_base,
NULL, UVM_UNKNOWN_OFFSET, 0,
UVM_MAPFLAG(UVM_PROT_NONE, UVM_PROT_NONE, UVM_INH_NONE,
UVM_ADV_NORMAL, 0)))
panic("startup: can not steal dvma map");
}
#endif
phys_map = uvm_map_create(pmap_kernel(), dvma_base, dvma_end,
VM_MAP_INTRSAFE);
if (phys_map == NULL)
panic("unable to create DVMA map");
/*
* Allocate DVMA space and dump into a privately managed
* resource map for double mappings which is usable from
* interrupt contexts.
*/
if (uvm_km_valloc_wait(phys_map, (dvma_end-dvma_base)) != dvma_base)
panic("unable to allocate from DVMA map");
dvmamap_extent = extent_create("dvmamap", dvma_base, dvma_end,
M_DEVBUF, NULL, 0, EX_NOWAIT);
if (dvmamap_extent == 0)
panic("unable to allocate extent for dvma");
#ifdef DEBUG
pmapdebug = opmapdebug;
#endif
printf("avail mem = %lu (%luMB)\n", ptoa(uvmexp.free),
ptoa(uvmexp.free)/1024/1024);
/*
* Set up buffers, so they can be used to read disk labels.
*/
bufinit();
/* Early interrupt handlers initialization */
intr_init();
}
/*
* Machine-dependent startup code
*/
void
cpu_startup()
{
#ifdef DEBUG
extern int pmapdebug;
int opmapdebug = pmapdebug;
#endif
vaddr_t minaddr, maxaddr;
paddr_t msgbufpa;
extern struct user *proc0paddr;
#ifdef DEBUG
pmapdebug = 0;
#endif
if (CPU_ISSUN4M) {
extern int stackgap_random;
stackgap_random = STACKGAP_RANDOM_SUN4M;
}
/*
* Re-map the message buffer from its temporary address
* at KERNBASE to MSGBUF_VA.
*/
/* Get physical address of the message buffer */
pmap_extract(pmap_kernel(), (vaddr_t)KERNBASE, &msgbufpa);
/* Invalidate the current mapping at KERNBASE. */
pmap_kremove((vaddr_t)KERNBASE, PAGE_SIZE);
pmap_update(pmap_kernel());
/* Enter the new mapping */
pmap_map(MSGBUF_VA, msgbufpa, msgbufpa + PAGE_SIZE,
VM_PROT_READ | VM_PROT_WRITE);
/* Re-initialize the message buffer. */
initmsgbuf((caddr_t)(MSGBUF_VA + (CPU_ISSUN4 ? 4096 : 0)), MSGBUFSIZE);
proc0.p_addr = proc0paddr;
/*
* Good {morning,afternoon,evening,night}.
*/
printf(version);
/*identifycpu();*/
printf("real mem = %u (%uMB)\n", ptoa(physmem),
ptoa(physmem)/1024/1024);
/*
* Allocate a submap for exec arguments. This map effectively
* limits the number of processes exec'ing at any time.
*/
minaddr = vm_map_min(kernel_map);
exec_map = uvm_km_suballoc(kernel_map, &minaddr, &maxaddr,
16*NCARGS, VM_MAP_PAGEABLE, FALSE, NULL);
/*
* Allocate a map for physio. Others use a submap of the kernel
* map, but we want one completely separate, even though it uses
* the same pmap.
*/
dvma_base = CPU_ISSUN4M ? DVMA4M_BASE : DVMA_BASE;
dvma_end = CPU_ISSUN4M ? DVMA4M_END : DVMA_END;
dvmamap_extent = extent_create("dvmamap", dvma_base, dvma_end,
M_DEVBUF, NULL, 0, EX_NOWAIT);
if (dvmamap_extent == NULL)
panic("unable to allocate extent for dvma");
#ifdef DEBUG
pmapdebug = opmapdebug;
#endif
printf("avail mem = %lu (%luMB)\n", ptoa(uvmexp.free),
ptoa(uvmexp.free)/1024/1024);
/*
* Set up buffers, so they can be used to read disk labels.
*/
bufinit();
/* Early interrupt handlers initialization */
intr_init();
}
/*===========================================================================*
* main *
*===========================================================================*/
PUBLIC void main()
{
/* Start the ball rolling. */
struct boot_image *ip; /* boot image pointer */
register struct proc *rp; /* process pointer */
register struct priv *sp; /* privilege structure pointer */
register int i, s;
int hdrindex; /* index to array of a.out headers */
phys_clicks text_base;
vir_clicks text_clicks, data_clicks;
reg_t ktsb; /* kernel task stack base */
struct exec e_hdr; /* for a copy of an a.out header */
/* Initialize the interrupt controller. */
intr_init(1);
/* Clear the process table. Anounce each slot as empty and set up mappings
* for proc_addr() and proc_nr() macros. Do the same for the table with
* privilege structures for the system processes.
*/
for (rp = BEG_PROC_ADDR, i = -NR_TASKS; rp < END_PROC_ADDR; ++rp, ++i) {
rp->p_rts_flags = SLOT_FREE; /* initialize free slot */
rp->p_nr = i; /* proc number from ptr */
(pproc_addr + NR_TASKS)[i] = rp; /* proc ptr from number */
}
for (sp = BEG_PRIV_ADDR, i = 0; sp < END_PRIV_ADDR; ++sp, ++i) {
sp->s_proc_nr = NONE; /* initialize as free */
sp->s_id = i; /* priv structure index */
ppriv_addr[i] = sp; /* priv ptr from number */
}
/* Set up proc table entries for processes in boot image. The stacks of the
* kernel tasks are initialized to an array in data space. The stacks
* of the servers have been added to the data segment by the monitor, so
* the stack pointer is set to the end of the data segment. All the
* processes are in low memory on the 8086. On the 386 only the kernel
* is in low memory, the rest is loaded in extended memory.
*/
/* Task stacks. */
ktsb = (reg_t) t_stack;
for (i=0; i < NR_BOOT_PROCS; ++i) {
ip = &image[i]; /* process' attributes */
rp = proc_addr(ip->proc_nr); /* get process pointer */
rp->p_max_priority = ip->priority; /* max scheduling priority */
rp->p_priority = ip->priority; /* current priority */
rp->p_quantum_size = ip->quantum; /* quantum size in ticks */
rp->p_ticks_left = ip->quantum; /* current credit */
strncpy(rp->p_name, ip->proc_name, P_NAME_LEN); /* set process name */
(void) get_priv(rp, (ip->flags & SYS_PROC)); /* assign structure */
priv(rp)->s_flags = ip->flags; /* process flags */
priv(rp)->s_trap_mask = ip->trap_mask; /* allowed traps */
priv(rp)->s_call_mask = ip->call_mask; /* kernel call mask */
priv(rp)->s_ipc_to.chunk[0] = ip->ipc_to; /* restrict targets */
if (iskerneln(proc_nr(rp))) { /* part of the kernel? */
if (ip->stksize > 0) { /* HARDWARE stack size is 0 */
rp->p_priv->s_stack_guard = (reg_t *) ktsb;
*rp->p_priv->s_stack_guard = STACK_GUARD;
}
ktsb += ip->stksize; /* point to high end of stack */
rp->p_reg.sp = ktsb; /* this task's initial stack ptr */
text_base = kinfo.code_base >> CLICK_SHIFT;
/* processes that are in the kernel */
hdrindex = 0; /* all use the first a.out header */
} else {
hdrindex = 1 + i-NR_TASKS; /* servers, drivers, INIT */
}
/* The bootstrap loader created an array of the a.out headers at
* absolute address 'aout'. Get one element to e_hdr.
*/
phys_copy(aout + hdrindex * A_MINHDR, vir2phys(&e_hdr),
(phys_bytes) A_MINHDR);
/* Convert addresses to clicks and build process memory map */
text_base = e_hdr.a_syms >> CLICK_SHIFT;
text_clicks = (e_hdr.a_text + CLICK_SIZE-1) >> CLICK_SHIFT;
if (!(e_hdr.a_flags & A_SEP)) text_clicks = 0; /* common I&D */
data_clicks = (e_hdr.a_total + CLICK_SIZE-1) >> CLICK_SHIFT;
rp->p_memmap[T].mem_phys = text_base;
rp->p_memmap[T].mem_len = text_clicks;
rp->p_memmap[D].mem_phys = text_base + text_clicks;
rp->p_memmap[D].mem_len = data_clicks;
rp->p_memmap[S].mem_phys = text_base + text_clicks + data_clicks;
rp->p_memmap[S].mem_vir = data_clicks; /* empty - stack is in data */
/* Set initial register values. The processor status word for tasks
* is different from that of other processes because tasks can
* access I/O; this is not allowed to less-privileged processes
*/
rp->p_reg.pc = (reg_t) ip->initial_pc;
rp->p_reg.psw = (iskernelp(rp)) ? INIT_TASK_PSW : INIT_PSW;
/* Initialize the server stack pointer. Take it down one word
* to give crtso.s something to use as "argc".
*/
if (isusern(proc_nr(rp))) { /* user-space process? */
rp->p_reg.sp = (rp->p_memmap[S].mem_vir +
rp->p_memmap[S].mem_len) << CLICK_SHIFT;
rp->p_reg.sp -= sizeof(reg_t);
}
/* Set ready. The HARDWARE task is never ready. */
if (rp->p_nr != HARDWARE) {
rp->p_rts_flags = 0; /* runnable if no flags */
lock_enqueue(rp); /* add to scheduling queues */
} else {
rp->p_rts_flags = NO_MAP; /* prevent from running */
}
/* Code and data segments must be allocated in protected mode. */
alloc_segments(rp);
}
