/*
* Initialise the wakeupgen module.
*/
int __init omap_wakeupgen_init(void)
{
int i;
unsigned int boot_cpu = smp_processor_id();
/* Not supported on OMAP4 ES1.0 silicon */
if (omap_rev() == OMAP4430_REV_ES1_0) {
WARN(1, "WakeupGen: Not supported on OMAP4430 ES1.0\n");
return -EPERM;
}
/* Static mapping, never released */
wakeupgen_base = ioremap(OMAP_WKUPGEN_BASE, SZ_4K);
if (WARN_ON(!wakeupgen_base))
return -ENOMEM;
if (cpu_is_omap44xx()) {
irq_banks = OMAP4_NR_BANKS;
max_irqs = OMAP4_NR_IRQS;
omap_secure_apis = 1;
} else if (soc_is_am43xx()) {
irq_banks = AM43XX_NR_REG_BANKS;
max_irqs = AM43XX_IRQS;
}
/* Clear all IRQ bitmasks at wakeupGen level */
for (i = 0; i < irq_banks; i++) {
wakeupgen_writel(0, i, CPU0_ID);
if (!soc_is_am43xx())
wakeupgen_writel(0, i, CPU1_ID);
}
/*
* Override GIC architecture specific functions to add
* OMAP WakeupGen interrupt controller along with GIC
*/
gic_arch_extn.irq_mask = wakeupgen_mask;
gic_arch_extn.irq_unmask = wakeupgen_unmask;
gic_arch_extn.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE;
/*
* FIXME: Add support to set_smp_affinity() once the core
* GIC code has necessary hooks in place.
*/
/* Associate all the IRQs to boot CPU like GIC init does. */
for (i = 0; i < max_irqs; i++)
irq_target_cpu[i] = boot_cpu;
irq_hotplug_init();
irq_pm_init();
return 0;
}
int __init omap_wakeupgen_init(void)
{
int i;
unsigned int boot_cpu = smp_processor_id();
/* */
if (omap_rev() == OMAP4430_REV_ES1_0) {
WARN(1, "WakeupGen: Not supported on OMAP4430 ES1.0\n");
return -EPERM;
}
/* */
wakeupgen_base = ioremap(OMAP44XX_WKUPGEN_BASE, SZ_4K);
if (WARN_ON(!wakeupgen_base))
return -ENOMEM;
/* */
for (i = 0; i < NR_REG_BANKS; i++) {
wakeupgen_writel(0, i, CPU0_ID);
wakeupgen_writel(0, i, CPU1_ID);
}
/*
*/
gic_arch_extn.irq_mask = wakeupgen_mask;
gic_arch_extn.irq_unmask = wakeupgen_unmask;
gic_arch_extn.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE;
/*
*/
/* */
for (i = 0; i < NR_IRQS; i++)
irq_target_cpu[i] = boot_cpu;
irq_hotplug_init();
irq_pm_init();
return 0;
}
/*
* Initialise the wakeupgen module.
*/
int __init omap_wakeupgen_init(void)
{
int i;
unsigned int boot_cpu = smp_processor_id();
unsigned int max_spi_reg;
/* Not supported on OMAP4 ES1.0 silicon */
if (omap_rev() == OMAP4430_REV_ES1_0) {
WARN(1, "WakeupGen: Not supported on OMAP4430 ES1.0\n");
return -EPERM;
}
/* Static mapping, never released */
wakeupgen_base = ioremap(OMAP_WKUPGEN_BASE, SZ_4K);
if (WARN_ON(!wakeupgen_base))
return -ENOMEM;
if (cpu_is_omap44xx()) {
irq_banks = OMAP4_NR_BANKS;
max_irqs = OMAP4_NR_IRQS;
secure_api_index = OMAP4_HAL_SAVEGIC_INDEX;
secure_hw_api_index = OMAP4_HAL_SAVEHW_INDEX;
secure_hal_save_all_api_index = OMAP4_HAL_SAVEALL_INDEX;
secure_ram_api_index = OMAP4_HAL_SAVESECURERAM_INDEX;
} else if (cpu_is_omap54xx()) {
secure_api_index = OMAP5_HAL_SAVEGIC_INDEX;
secure_hw_api_index = OMAP5_HAL_SAVEHW_INDEX;
secure_hal_save_all_api_index = OMAP5_HAL_SAVEALL_INDEX;
secure_ram_api_index = OMAP5_HAL_SAVESECURERAM_INDEX;
}
/* Clear all IRQ bitmasks at wakeupGen level */
for (i = 0; i < irq_banks; i++) {
wakeupgen_writel(0, i, CPU0_ID);
wakeupgen_writel(0, i, CPU1_ID);
}
/*
* Override GIC architecture specific functions to add
* OMAP WakeupGen interrupt controller along with GIC
*/
gic_arch_extn.irq_mask = wakeupgen_mask;
gic_arch_extn.irq_unmask = wakeupgen_unmask;
gic_arch_extn.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE;
/*
* FIXME: Add support to set_smp_affinity() once the core
* GIC code has necessary hooks in place.
*/
/* Associate all the IRQs to boot CPU like GIC init does. */
for (i = 0; i < max_irqs; i++)
irq_target_cpu[i] = boot_cpu;
/*
* Find out how many interrupts are supported.
* OMAP4 supports max of 128 SPIs where as GIC can support
* up to 1020 interrupt sources. On OMAP4, maximum SPIs are
* fused in DIST_CTR bit-fields as 128. Hence the code is safe
* from reserved register writes since its well within 1020.
*/
max_spi_reg = gic_readl(GIC_DIST_CTR, 0) & 0x1f;
spi_irq_banks = min(max_spi_reg, irq_banks);
irq_hotplug_init();
irq_pm_init();
return 0;
}
/*
* Initialise the wakeupgen module.
*/
int __init omap_wakeupgen_init(void)
{
int i;
unsigned int boot_cpu = smp_processor_id();
unsigned int max_spi_reg;
/* Not supported on OMAP4 ES1.0 silicon */
if (omap_rev() == OMAP4430_REV_ES1_0) {
WARN(1, "WakeupGen: Not supported on OMAP4430 ES1.0\n");
return -EPERM;
}
/* Static mapping, never released */
wakeupgen_base = ioremap(OMAP_WKUPGEN_BASE, SZ_4K);
if (WARN_ON(!wakeupgen_base))
return -ENOMEM;
if (cpu_is_omap44xx()) {
irq_banks = OMAP4_NR_BANKS;
max_irqs = OMAP4_NR_IRQS;
secure_api_index = OMAP4_HAL_SAVEGIC_INDEX;
secure_hw_api_index = OMAP4_HAL_SAVEHW_INDEX;
secure_hal_save_all_api_index = OMAP4_HAL_SAVEALL_INDEX;
secure_ram_api_index = OMAP4_HAL_SAVESECURERAM_INDEX;
} else if (cpu_is_omap54xx()) {
secure_api_index = OMAP5_HAL_SAVEGIC_INDEX;
secure_hw_api_index = OMAP5_HAL_SAVEHW_INDEX;
secure_hal_save_all_api_index = OMAP5_HAL_SAVEALL_INDEX;
secure_ram_api_index = OMAP5_HAL_SAVESECURERAM_INDEX;
}
/* Clear all IRQ bitmasks at wakeupGen level */
for (i = 0; i < irq_banks; i++) {
wakeupgen_writel(0, i, CPU0_ID);
wakeupgen_writel(0, i, CPU1_ID);
}
/*
* Override GIC architecture specific functions to add
* OMAP WakeupGen interrupt controller along with GIC
*/
gic_arch_extn.irq_mask = wakeupgen_mask;
gic_arch_extn.irq_unmask = wakeupgen_unmask;
gic_arch_extn.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE;
/*
* FIXME: Add support to set_smp_affinity() once the core
* GIC code has necessary hooks in place.
*/
/* Associate all the IRQs to boot CPU like GIC init does. */
for (i = 0; i < max_irqs; i++)
irq_target_cpu[i] = boot_cpu;
/*
* Find out how many interrupts are supported.
* OMAP4 supports max of 128 SPIs where as GIC can support
* up to 1020 interrupt sources. On OMAP4, maximum SPIs are
* fused in DIST_CTR bit-fields as 128. Hence the code is safe
* from reserved register writes since its well within 1020.
*/
max_spi_reg = gic_readl(GIC_DIST_CTR, 0) & 0x1f;
spi_irq_banks = min(max_spi_reg, irq_banks);
/*
* Set CPU0 GIC backup flag permanently for omap4460 GP,
* this is needed because of the ROM code bug that breaks
* GIC during wakeup from device off. This errata fix also
* clears the GIC save area during init to prevent restoring
* garbage to the GIC.
*/
if (cpu_is_omap446x() && omap_type() == OMAP2_DEVICE_TYPE_GP)
pm44xx_errata |= PM_OMAP4_ROM_CPU1_BACKUP_ERRATUM_xxx;
if (cpu_is_omap44xx() && (omap_type() == OMAP2_DEVICE_TYPE_GP)) {
sar_base = omap4_get_sar_ram_base();
if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_CPU1_BACKUP_ERRATUM_xxx))
for (i = SAR_BACKUP_STATUS_OFFSET;
i < WAKEUPGENENB_OFFSET_CPU0; i += 4)
sar_writel(0, i, 0);
sar_writel(GIC_ISR_NON_SECURE, SAR_ICDISR_CPU0_OFFSET, 0);
sar_writel(GIC_ISR_NON_SECURE, SAR_ICDISR_CPU1_OFFSET, 0);
for (i = 0; i < max_spi_reg; i++)
sar_writel(GIC_ISR_NON_SECURE, SAR_ICDISR_SPI_OFFSET,
i);
if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_CPU1_BACKUP_ERRATUM_xxx))
__raw_writel(SAR_BACKUP_STATUS_GIC_CPU0,
sar_base + SAR_BACKUP_STATUS_OFFSET);
} else {
l3_main_3_oh = omap_hwmod_lookup("l3_main_3");
if (!l3_main_3_oh)
pr_err("%s: failed to get l3_main_3_oh\n", __func__);
}
irq_hotplug_init();
irq_pm_init();
return 0;
}
