static void
handle_windows_pre8(const BLUETOOTH_ADDRESS *move_addr, const BLUETOOTH_ADDRESS *radio_addr, const HANDLE hRadio)
{
int connected = 0;
while (!connected) {
BLUETOOTH_DEVICE_INFO device_info;
if (get_bluetooth_device_info(hRadio, move_addr, &device_info, 0) != 0) {
WINPAIR_DEBUG("No Bluetooth device found matching the given address");
} else {
if (is_move_motion_controller(&device_info)) {
WINPAIR_DEBUG("Found Move Motion Controller matching the given address");
if (device_info.fConnected) {
/* enable HID service only if necessary */
WINPAIR_DEBUG("Checking HID service ...");
if (!is_hid_service_enabled(hRadio, &device_info)) {
WINPAIR_DEBUG("Enabling HID service ...");
GUID service = HumanInterfaceDeviceServiceClass_UUID;
DWORD result = BluetoothSetServiceState(hRadio, &device_info, &service, BLUETOOTH_SERVICE_ENABLE);
if (result != ERROR_SUCCESS) {
WINPAIR_DEBUG("Failed to enable HID service");
}
}
WINPAIR_DEBUG("Verifying successful connection ...");
if (is_connection_established(hRadio, &device_info)) {
/* if we have a connection, stop trying to connect this device */
printf("Connection verified.\n");
connected = 1;
break;
}
}
} else {
WINPAIR_DEBUG("Bluetooth device matching the given address is not a Move Motion Controller");
}
}
Sleep(SLEEP_BETWEEN_SCANS);
}
}
int
windows_register_psmove(const char *move_addr_str, const HANDLE hRadio)
{
/* parse controller's Bluetooth device address string */
BLUETOOTH_ADDRESS *move_addr = string_to_btaddr(move_addr_str);
if (!move_addr) {
WINPAIR_DEBUG("Cannot parse controller address: '%s'", move_addr_str);
return 1;
}
if (set_up_bluetooth_radio(hRadio) != 0) {
WINPAIR_DEBUG("Failed to configure Bluetooth radio for use");
return 1;
}
/* Keep track of the number of times the loop iterates so we may timeout. */
int timeout_duration = 30; // seconds
int sleep_interval = 1000; // msec
int timeout_iterations = timeout_duration * 1000 / sleep_interval;
int loop_count = 0;
printf("\n" \
" Unplug the controller.\n" \
"\n"
" Now press the controller's PS button. The red status LED\n" \
" will start blinking. Whenever it goes off, press the\n" \
" PS button again. Repeat this until the status LED finally\n" \
" remains lit. Press Ctrl+C to cancel anytime.\n");
for(;;) {
BLUETOOTH_DEVICE_INFO device_info;
if (get_bluetooth_device_info(hRadio, move_addr, &device_info) != 0) {
WINPAIR_DEBUG("No Bluetooth device found matching the given address");
} else {
if (is_move_motion_controller(&device_info)) {
WINPAIR_DEBUG("Found Move Motion Controller matching the given address");
if (device_info.fConnected) {
/* enable HID service only if necessary */
WINPAIR_DEBUG("Checking HID service ...");
if (!is_hid_service_enabled(hRadio, &device_info)) {
WINPAIR_DEBUG("Enabling HID service ...");
GUID service = HumanInterfaceDeviceServiceClass_UUID;
DWORD result = BluetoothSetServiceState(hRadio, &device_info, &service, BLUETOOTH_SERVICE_ENABLE);
if (result != ERROR_SUCCESS) {
WINPAIR_DEBUG("Failed to enable HID service");
}
}
WINPAIR_DEBUG("Verifying successful connection ...");
if (is_connection_established(hRadio, &device_info)) {
/* if we have a connection, stop trying to connect this device */
printf("Connection verified.\n");
break;
}
}
} else {
WINPAIR_DEBUG("Bluetooth device matching the given address is not a Move Motion Controller");
}
}
if (loop_count >= timeout_iterations) {
printf("\n"
" A connection could not be established. This is not\n"
" unusual in Windows. Please refer to the README document\n"
" for your platform for more information. Press Ctrl+C to cancel.");
}
/* sleep for 1 second */
Sleep(1000);
loop_count++;
}
free(move_addr);
return 0;
}
static void
handle_windows8_and_later(const BLUETOOTH_ADDRESS *move_addr, const BLUETOOTH_ADDRESS *radio_addr, const HANDLE hRadio)
{
unsigned int scan = 0;
int connected = 0;
while (!connected) {
BLUETOOTH_DEVICE_INFO device_info;
if (get_bluetooth_device_info(hRadio, move_addr, &device_info, scan == 0) != 0) {
WINPAIR_DEBUG("No Bluetooth device found matching the given address");
} else {
if (is_move_motion_controller(&device_info)) {
WINPAIR_DEBUG("Found Move Motion Controller matching the given address");
unsigned int conn_try;
for (conn_try = 1; conn_try <= CONN_RETRIES; conn_try++) {
WINPAIR_DEBUG("Connection try %d/%d", conn_try, CONN_RETRIES);
if (update_device_info(hRadio, &device_info) != 0) {
break;
}
if (device_info.fConnected) {
/* Windows 8 (and later) seems to require manual help with setting up
* the device in the registry.
*/
WINPAIR_DEBUG("Patching the registry ...");
if (patch_registry(move_addr, radio_addr) != 0) {
WINPAIR_DEBUG("Failed to patch the registry");
}
/* enable HID service only if necessary */
WINPAIR_DEBUG("Checking HID service ...");
if (!is_hid_service_enabled(hRadio, &device_info)) {
WINPAIR_DEBUG("Enabling HID service ...");
GUID service = HumanInterfaceDeviceServiceClass_UUID;
DWORD result = BluetoothSetServiceState(hRadio, &device_info, &service, BLUETOOTH_SERVICE_ENABLE);
if (result != ERROR_SUCCESS) {
WINPAIR_DEBUG("Failed to enable HID service");
}
WINPAIR_DEBUG("Patching the registry ...");
if (patch_registry(move_addr, radio_addr) != 0) {
WINPAIR_DEBUG("Failed to patch the registry");
}
}
WINPAIR_DEBUG("Verifying successful connection ...");
if (is_connection_established(hRadio, &device_info)) {
/* if we have a connection, stop trying to connect this device */
printf("Connection verified.\n");
connected = 1;
break;
}
}
Sleep(CONN_DELAY);
}
if(!device_info.fConnected) {
BluetoothRemoveDevice(&(device_info.Address));
WINPAIR_DEBUG("Device removed, starting all over again");
}
} else {
WINPAIR_DEBUG("Bluetooth device matching the given address is not a Move Motion Controller");
}
}
Sleep(SLEEP_BETWEEN_SCANS);
scan = (scan + 1) % BT_SCAN_NEW_INQUIRY;
}
}
