static void spl_dram_init(void)
{
if (is_mx6dq())
ddr_init(mx6q_dcd_table, ARRAY_SIZE(mx6q_dcd_table));
else if (is_mx6dqp())
ddr_init(mx6qp_dcd_table, ARRAY_SIZE(mx6qp_dcd_table));
else if (is_mx6sdl())
ddr_init(mx6dl_dcd_table, ARRAY_SIZE(mx6dl_dcd_table));
}
static inline int gpt_has_clk_source_osc(void)
{
#if defined(CONFIG_MX6)
if (((is_mx6dq()) && (soc_rev() > CHIP_REV_1_0)) ||
is_mx6dqp() || is_mx6sdl() || is_mx6sx() || is_mx6ul())
return 1;
return 0;
#else
return 0;
#endif
}
int board_late_init(void)
{
#ifdef CONFIG_CMD_BMODE
add_board_boot_modes(board_boot_modes);
#endif
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
env_set("board_name", "SABREAUTO");
if (is_mx6dqp())
env_set("board_rev", "MX6QP");
else if (is_mx6dq())
env_set("board_rev", "MX6Q");
else if (is_mx6sdl())
env_set("board_rev", "MX6DL");
#endif
return 0;
}
uint32_t authenticate_image(uint32_t ddr_start, uint32_t image_size)
{
uint32_t load_addr = 0;
size_t bytes;
ptrdiff_t ivt_offset = 0;
int result = 0;
ulong start;
hab_rvt_authenticate_image_t *hab_rvt_authenticate_image;
hab_rvt_entry_t *hab_rvt_entry;
hab_rvt_exit_t *hab_rvt_exit;
hab_rvt_authenticate_image = hab_rvt_authenticate_image_p;
hab_rvt_entry = hab_rvt_entry_p;
hab_rvt_exit = hab_rvt_exit_p;
if (is_hab_enabled()) {
printf("\nAuthenticate image from DDR location 0x%x...\n",
ddr_start);
hab_caam_clock_enable(1);
if (hab_rvt_entry() == HAB_SUCCESS) {
/* If not already aligned, Align to ALIGN_SIZE */
ivt_offset = (image_size + ALIGN_SIZE - 1) &
~(ALIGN_SIZE - 1);
start = ddr_start;
bytes = ivt_offset + IVT_SIZE + CSF_PAD_SIZE;
#ifdef DEBUG
printf("\nivt_offset = 0x%x, ivt addr = 0x%x\n",
ivt_offset, ddr_start + ivt_offset);
puts("Dumping IVT\n");
print_buffer(ddr_start + ivt_offset,
(void *)(ddr_start + ivt_offset),
4, 0x8, 0);
puts("Dumping CSF Header\n");
print_buffer(ddr_start + ivt_offset+IVT_SIZE,
(void *)(ddr_start + ivt_offset+IVT_SIZE),
4, 0x10, 0);
#if !defined(CONFIG_SPL_BUILD)
get_hab_status();
#endif
puts("\nCalling authenticate_image in ROM\n");
printf("\tivt_offset = 0x%x\n", ivt_offset);
printf("\tstart = 0x%08lx\n", start);
printf("\tbytes = 0x%x\n", bytes);
#endif
/*
* If the MMU is enabled, we have to notify the ROM
* code, or it won't flush the caches when needed.
* This is done, by setting the "pu_irom_mmu_enabled"
* word to 1. You can find its address by looking in
* the ROM map. This is critical for
* authenticate_image(). If MMU is enabled, without
* setting this bit, authentication will fail and may
* crash.
*/
/* Check MMU enabled */
if (is_soc_type(MXC_SOC_MX6) && get_cr() & CR_M) {
if (is_mx6dq()) {
/*
* This won't work on Rev 1.0.0 of
* i.MX6Q/D, since their ROM doesn't
* do cache flushes. don't think any
* exist, so we ignore them.
*/
if (!is_mx6dqp())
writel(1, MX6DQ_PU_IROM_MMU_EN_VAR);
} else if (is_mx6sdl()) {
writel(1, MX6DLS_PU_IROM_MMU_EN_VAR);
} else if (is_mx6sl()) {
writel(1, MX6SL_PU_IROM_MMU_EN_VAR);
}
}
load_addr = (uint32_t)hab_rvt_authenticate_image(
HAB_CID_UBOOT,
ivt_offset, (void **)&start,
(size_t *)&bytes, NULL);
if (hab_rvt_exit() != HAB_SUCCESS) {
puts("hab exit function fail\n");
load_addr = 0;
}
} else {
puts("hab entry function fail\n");
}
hab_caam_clock_enable(0);
#if !defined(CONFIG_SPL_BUILD)
get_hab_status();
#endif
} else {
puts("hab fuse not enabled\n");
}
if ((!is_hab_enabled()) || (load_addr != 0))
result = 1;
return result;
}
