static int show_stmt_repeat(ivl_statement_t net, ivl_scope_t sscope)
{
int rc = 0;
unsigned lab_top = local_count++, lab_out = local_count++;
ivl_expr_t exp = ivl_stmt_cond_expr(net);
struct vector_info cnt = draw_eval_expr(exp, 0);
/* Test that 0 < expr */
fprintf(vvp_out, "T_%u.%u %%cmp/u 0, %u, %u;\n", thread_count,
lab_top, cnt.base, cnt.wid);
clear_expression_lookaside();
fprintf(vvp_out, " %%jmp/0xz T_%u.%u, 5;\n", thread_count, lab_out);
/* This adds -1 (all ones in 2's complement) to the count. */
fprintf(vvp_out, " %%add %u, 1, %u;\n", cnt.base, cnt.wid);
rc += show_statement(ivl_stmt_sub_stmt(net), sscope);
fprintf(vvp_out, " %%jmp T_%u.%u;\n", thread_count, lab_top);
fprintf(vvp_out, "T_%u.%u ;\n", thread_count, lab_out);
clear_expression_lookaside();
clr_vector(cnt);
return rc;
}
static int show_stmt_wait(ivl_statement_t net, ivl_scope_t sscope)
{
if (ivl_stmt_nevent(net) == 1) {
ivl_event_t ev = ivl_stmt_events(net, 0);
fprintf(vvp_out, " %%wait E_%p;\n", ev);
} else {
unsigned idx;
static unsigned int cascade_counter = 0;
ivl_event_t ev = ivl_stmt_events(net, 0);
fprintf(vvp_out, "Ewait_%u .event/or E_%p", cascade_counter, ev);
for (idx = 1 ; idx < ivl_stmt_nevent(net) ; idx += 1) {
ev = ivl_stmt_events(net, idx);
fprintf(vvp_out, ", E_%p", ev);
}
fprintf(vvp_out, ";\n %%wait Ewait_%u;\n", cascade_counter);
cascade_counter += 1;
}
/* Always clear the expression lookaside after a
%wait. Anything can happen while the thread is waiting. */
clear_expression_lookaside();
return show_statement(ivl_stmt_sub_stmt(net), sscope);
}
/*
* The delayx statement is slightly more complex in that it is
* necessary to calculate the delay first. Load the calculated delay
* into and index register and use the %delayx instruction to do the
* actual delay.
*/
static int show_stmt_delayx(ivl_statement_t net, ivl_scope_t sscope)
{
int rc = 0;
ivl_expr_t exp = ivl_stmt_delay_expr(net);
ivl_statement_t stmt = ivl_stmt_sub_stmt(net);
switch (ivl_expr_value(exp)) {
case IVL_VT_VECTOR: {
struct vector_info del = draw_eval_expr(exp, 0);
fprintf(vvp_out, " %%ix/get 0, %u, %u;\n",
del.base, del.wid);
clr_vector(del);
break;
}
case IVL_VT_REAL: {
int word = draw_eval_real(exp);
fprintf(vvp_out, " %%cvt/ir 0, %d;\n", word);
clr_word(word);
break;
}
default:
assert(0);
}
fprintf(vvp_out, " %%delayx 0;\n");
/* Lots of things can happen during a delay. */
clear_expression_lookaside();
rc += show_statement(stmt, sscope);
return rc;
}
static void emit_stmt_forever(ivl_scope_t scope, ivl_statement_t stmt)
{
fprintf(vlog_out, "%*cforever", get_indent(), ' ');
emit_stmt_file_line(stmt);
single_indent = 1;
emit_stmt(scope, ivl_stmt_sub_stmt(stmt));
}
/*
* Icarus translated for(<assign>; <cond>; <incr_assign>) <body> into
*
* begin
* <assign>;
* while (<cond>) begin
* <body>
* <incr_assign>
* end
* end
* This routine looks for this pattern and turns it back into the
* appropriate for loop.
*/
static unsigned is_for_loop(ivl_scope_t scope, ivl_statement_t stmt)
{
unsigned wid;
ivl_statement_t assign, while_lp, while_blk, body, incr_assign;
/* We must have two block elements. */
if (ivl_stmt_block_count(stmt) != 2) return 0;
/* The first must be an assign. */
assign = ivl_stmt_block_stmt(stmt, 0);
if (ivl_statement_type(assign) != IVL_ST_ASSIGN) return 0;
/* The second must be a while. */
while_lp = ivl_stmt_block_stmt(stmt, 1);
if (ivl_statement_type(while_lp) != IVL_ST_WHILE) return 0;
/* The while statement must be a block. */
while_blk = ivl_stmt_sub_stmt(while_lp);
if (ivl_statement_type(while_blk) != IVL_ST_BLOCK) return 0;
/* It must not be a named block. */
if (ivl_stmt_block_scope(while_blk)) return 0;
/* It must have two elements. */
if (ivl_stmt_block_count(while_blk) != 2) return 0;
/* The first block element (the body) can be anything. */
body = ivl_stmt_block_stmt(while_blk, 0);
/* The second block element must be the increment assign. */
incr_assign = ivl_stmt_block_stmt(while_blk, 1);
if (ivl_statement_type(incr_assign) != IVL_ST_ASSIGN) return 0;
/* And finally the for statements must have the same line number
* as the block. */
if ((ivl_stmt_lineno(stmt) != ivl_stmt_lineno(assign)) ||
(ivl_stmt_lineno(stmt) != ivl_stmt_lineno(while_lp)) ||
(ivl_stmt_lineno(stmt) != ivl_stmt_lineno(while_blk)) ||
(ivl_stmt_lineno(stmt) != ivl_stmt_lineno(incr_assign))) {
return 0;
}
/* The pattern matched so generate the appropriate code. */
fprintf(vlog_out, "%*cfor(", get_indent(), ' ');
/* Emit the initialization statement. */
// HERE: Do we need to calculate the width? The compiler should have already
// done this for us.
wid = emit_stmt_lval(scope, assign);
fprintf(vlog_out, " = ");
emit_expr(scope, ivl_stmt_rval(assign), wid);
fprintf(vlog_out, "; ");
/* Emit the condition. */
emit_expr(scope, ivl_stmt_cond_expr(while_lp), 0);
fprintf(vlog_out, "; ");
/* Emit in increment statement. */
// HERE: Do we need to calculate the width? The compiler should have already
// done this for us.
wid = emit_stmt_lval(scope, incr_assign);
fprintf(vlog_out, " = ");
emit_expr(scope, ivl_stmt_rval(incr_assign), wid);
fprintf(vlog_out, ")");
emit_stmt_file_line(stmt);
/* Now emit the body. */
single_indent = 1;
emit_stmt(scope, body);
return 1;
}
static void emit_stmt_delay(ivl_scope_t scope, ivl_statement_t stmt)
{
fprintf(vlog_out, "%*c#", get_indent(), ' ');
emit_scaled_delay(scope, ivl_stmt_delay_val(stmt));
emit_stmt_file_line(stmt);
single_indent = 1;
emit_stmt(scope, ivl_stmt_sub_stmt(stmt));
}
static void emit_stmt_repeat(ivl_scope_t scope, ivl_statement_t stmt)
{
fprintf(vlog_out, "%*crepeat (", get_indent(), ' ');
emit_expr(scope, ivl_stmt_cond_expr(stmt), 0);
fprintf(vlog_out, ")");
emit_stmt_file_line(stmt);
single_indent = 1;
emit_stmt(scope, ivl_stmt_sub_stmt(stmt));
}
static void emit_stmt_delayx(ivl_scope_t scope, ivl_statement_t stmt)
{
fprintf(vlog_out, "%*c#(", get_indent(), ' ');
emit_scaled_delayx(scope, ivl_stmt_delay_expr(stmt), 1);
fprintf(vlog_out, ")");
emit_stmt_file_line(stmt);
single_indent = 1;
emit_stmt(scope, ivl_stmt_sub_stmt(stmt));
}
static void emit_stmt_wait(ivl_scope_t scope, ivl_statement_t stmt)
{
fprintf(vlog_out, "%*c@(", get_indent(), ' ');
emit_event(scope, stmt);
fprintf(vlog_out, ")");
emit_stmt_file_line(stmt);
single_indent = 1;
emit_stmt(scope, ivl_stmt_sub_stmt(stmt));
}
/*
* Icarus translated wait(<expr) <stmt> into
* begin
* while (<expr> !== 1'b1) @(<expr sensitivities>);
* <stmt>
* end
* This routine looks for this pattern and turns it back into a
* wait statement.
*/
static unsigned is_wait(ivl_scope_t scope, ivl_statement_t stmt)
{
ivl_statement_t while_wait, wait, wait_stmt;
ivl_expr_t while_expr, expr;
const char *bits;
/* We must have two block elements. */
if (ivl_stmt_block_count(stmt) != 2) return 0;
/* The first must be a while. */
while_wait = ivl_stmt_block_stmt(stmt, 0);
if (ivl_statement_type(while_wait) != IVL_ST_WHILE) return 0;
/* That has a wait with a NOOP statement. */
wait = ivl_stmt_sub_stmt(while_wait);
if (ivl_statement_type(wait) != IVL_ST_WAIT) return 0;
wait_stmt = ivl_stmt_sub_stmt(wait);
if (ivl_statement_type(wait_stmt) != IVL_ST_NOOP) return 0;
/* Check that the while condition has the correct form. */
while_expr = ivl_stmt_cond_expr(while_wait);
if (ivl_expr_type(while_expr) != IVL_EX_BINARY) return 0;
if (ivl_expr_opcode(while_expr) != 'N') return 0;
/* Has a second operator that is a constant 1'b1. */
expr = ivl_expr_oper2(while_expr);
if (ivl_expr_type(expr) != IVL_EX_NUMBER) return 0;
if (ivl_expr_width(expr) != 1) return 0;
bits = ivl_expr_bits(expr);
if (*bits != '1') return 0;
// HERE: There is no easy way to verify that the @ sensitivity list
// matches the first expression so we don't check for that yet.
/* And finally the two statements that represent the wait must
* have the same line number as the block. */
if ((ivl_stmt_lineno(stmt) != ivl_stmt_lineno(while_wait)) ||
(ivl_stmt_lineno(stmt) != ivl_stmt_lineno(wait))) {
return 0;
}
/* The pattern matched so generate the appropriate code. */
fprintf(vlog_out, "%*cwait(", get_indent(), ' ');
emit_expr(scope, ivl_expr_oper1(while_expr), 0);
fprintf(vlog_out, ")");
emit_stmt_file_line(stmt);
single_indent = 1;
emit_stmt(scope, ivl_stmt_block_stmt(stmt, 1));
return 1;
}
static int show_stmt_forever(ivl_statement_t net, ivl_scope_t sscope)
{
int rc = 0;
ivl_statement_t stmt = ivl_stmt_sub_stmt(net);
unsigned lab_top = local_count++;
fprintf(vvp_out, "T_%u.%u ;\n", thread_count, lab_top);
rc += show_statement(stmt, sscope);
fprintf(vvp_out, " %%jmp T_%u.%u;\n", thread_count, lab_top);
return rc;
}
/*
* The delay statement is easy. Simply write a ``%delay <n>''
* instruction to delay the thread, then draw the included statement.
* The delay statement comes from verilog code like this:
*
* ...
* #<delay> <stmt>;
*/
static int show_stmt_delay(ivl_statement_t net, ivl_scope_t sscope)
{
int rc = 0;
unsigned long delay = ivl_stmt_delay_val(net);
ivl_statement_t stmt = ivl_stmt_sub_stmt(net);
fprintf(vvp_out, " %%delay %lu;\n", delay);
/* Lots of things can happen during a delay. */
clear_expression_lookaside();
rc += show_statement(stmt, sscope);
return rc;
}
static int show_stmt_while(ivl_statement_t net, ivl_scope_t sscope)
{
int rc = 0;
struct vector_info cvec;
unsigned top_label = local_count++;
unsigned out_label = local_count++;
/* Start the loop. The top of the loop starts a basic block
because it can be entered from above or from the bottom of
the loop. */
fprintf(vvp_out, "T_%d.%d ;\n", thread_count, top_label);
clear_expression_lookaside();
/* Draw the evaluation of the condition expression, and test
the result. If the expression evaluates to false, then
branch to the out label. */
cvec = draw_eval_expr(ivl_stmt_cond_expr(net), STUFF_OK_XZ|STUFF_OK_47);
if (cvec.wid > 1)
cvec = reduction_or(cvec);
fprintf(vvp_out, " %%jmp/0xz T_%d.%d, %u;\n",
thread_count, out_label, cvec.base);
if (cvec.base >= 8)
clr_vector(cvec);
/* Draw the body of the loop. */
rc += show_statement(ivl_stmt_sub_stmt(net), sscope);
/* This is the bottom of the loop. branch to the top where the
test is repeased, and also draw the out label. */
fprintf(vvp_out, " %%jmp T_%d.%d;\n", thread_count, top_label);
fprintf(vvp_out, "T_%d.%d ;\n", thread_count, out_label);
clear_expression_lookaside();
return rc;
}
static void show_statement(ivl_statement_t net, unsigned ind)
{
const ivl_statement_type_t code = ivl_statement_type(net);
switch (code) {
case IVL_ST_ASSIGN:
fprintf(out, "%*s", ind, "");
show_assign_lvals(net);
fprintf(out, " = ");
show_expression(ivl_stmt_rval(net));
fprintf(out, ";\n");
break;
case IVL_ST_BLOCK: {
unsigned cnt = ivl_stmt_block_count(net);
unsigned idx;
fprintf(out, "%*sbegin\n", ind, "");
for (idx = 0 ; idx < cnt ; idx += 1) {
ivl_statement_t cur = ivl_stmt_block_stmt(net, idx);
show_statement(cur, ind+4);
}
fprintf(out, "%*send\n", ind, "");
break;
}
case IVL_ST_CONDIT: {
ivl_statement_t t = ivl_stmt_cond_true(net);
ivl_statement_t f = ivl_stmt_cond_false(net);
fprintf(out, "%*sif (", ind, "");
show_expression(ivl_stmt_cond_expr(net));
fprintf(out, ")\n");
if (t)
show_statement(t, ind+4);
else
fprintf(out, "%*s;\n", ind+4, "");
if (f) {
fprintf(out, "%*selse\n", ind, "");
show_statement(f, ind+4);
}
break;
}
case IVL_ST_DELAY:
fprintf(out, "%*s#%lu\n", ind, "", ivl_stmt_delay_val(net));
show_statement(ivl_stmt_sub_stmt(net), ind+2);
break;
case IVL_ST_NOOP:
fprintf(out, "%*s/* noop */;\n", ind, "");
break;
case IVL_ST_STASK:
if (ivl_stmt_parm_count(net) == 0) {
fprintf(out, "%*s%s;\n", ind, "", ivl_stmt_name(net));
} else {
unsigned idx;
fprintf(out, "%*s%s(", ind, "", ivl_stmt_name(net));
show_expression(ivl_stmt_parm(net, 0));
for (idx = 1 ; idx < ivl_stmt_parm_count(net) ; idx += 1) {
fprintf(out, ", ");
show_expression(ivl_stmt_parm(net, idx));
}
fprintf(out, ");\n");
}
break;
case IVL_ST_WAIT:
fprintf(out, "%*s@(...)\n", ind, "");
show_statement(ivl_stmt_sub_stmt(net), ind+2);
break;
case IVL_ST_WHILE:
fprintf(out, "%*swhile (<?>)\n", ind, "");
show_statement(ivl_stmt_sub_stmt(net), ind+2);
break;
default:
fprintf(out, "%*sunknown statement type (%d)\n", ind, "", code);
}
}
/*
* Icarus translated <var> = repeat(<count>) <event> <value> into
* begin
* <tmp> = <value>;
* repeat(<count>) <event>;
* <var> = <tmp>;
* end
* This routine looks for this pattern and turns it back into the
* appropriate blocking assignment.
*/
static unsigned is_repeat_event_assign(ivl_scope_t scope, ivl_statement_t stmt)
{
unsigned wid;
ivl_statement_t assign, event, event_assign, repeat;
ivl_lval_t lval;
ivl_expr_t rval;
ivl_signal_t lsig, rsig;
/* We must have three block elements. */
if (ivl_stmt_block_count(stmt) != 3) return 0;
/* The first must be an assign. */
assign = ivl_stmt_block_stmt(stmt, 0);
if (ivl_statement_type(assign) != IVL_ST_ASSIGN) return 0;
/* The second must be a repeat with an event or an event. */
repeat = ivl_stmt_block_stmt(stmt, 1);
if (ivl_statement_type(repeat) != IVL_ST_REPEAT) return 0;
/* The repeat must have an event statement. */
event = ivl_stmt_sub_stmt(repeat);
if (ivl_statement_type(event) != IVL_ST_WAIT) return 0;
/* The third must be an assign. */
event_assign = ivl_stmt_block_stmt(stmt, 2);
if (ivl_statement_type(event_assign) != IVL_ST_ASSIGN) return 0;
/* The L-value must be a single signal. */
if (ivl_stmt_lvals(assign) != 1) return 0;
lval = ivl_stmt_lval(assign, 0);
/* It must not have an array select. */
if (ivl_lval_idx(lval)) return 0;
/* It must not have a non-zero base. */
if (ivl_lval_part_off(lval)) return 0;
lsig = ivl_lval_sig(lval);
/* It must not be part of the signal. */
if (ivl_lval_width(lval) != ivl_signal_width(lsig)) return 0;
/* The R-value must be a single signal. */
rval = ivl_stmt_rval(event_assign);
if (ivl_expr_type(rval) != IVL_EX_SIGNAL) return 0;
/* It must not be an array word. */
if (ivl_expr_oper1(rval)) return 0;
rsig = ivl_expr_signal(rval);
/* The two signals must be the same. */
if (lsig != rsig) return 0;
/* And finally the four statements must have the same line number
* as the block. */
if ((ivl_stmt_lineno(stmt) != ivl_stmt_lineno(assign)) ||
(ivl_stmt_lineno(stmt) != ivl_stmt_lineno(repeat)) ||
(ivl_stmt_lineno(stmt) != ivl_stmt_lineno(event)) ||
(ivl_stmt_lineno(stmt) != ivl_stmt_lineno(event_assign))) {
return 0;
}
/* The pattern matched so generate the appropriate code. */
fprintf(vlog_out, "%*c", get_indent(), ' ');
wid = emit_stmt_lval(scope, event_assign);
fprintf(vlog_out, " =");
if (repeat) {
fprintf(vlog_out, " repeat (");
emit_expr(scope, ivl_stmt_cond_expr(repeat), 0);
fprintf(vlog_out, ")");
}
fprintf(vlog_out, " @(");
emit_event(scope, event);
fprintf(vlog_out, ") ");
emit_expr(scope, ivl_stmt_rval(assign), wid);
fprintf(vlog_out, ";");
emit_stmt_file_line(stmt);
fprintf(vlog_out, "\n");
return 1;
}
/*
* Icarus translated <var> = <delay or event> <value> into
* begin
* <tmp> = <value>;
* <delay or event> <var> = <tmp>;
* end
* This routine looks for this pattern and turns it back into the
* appropriate blocking assignment.
*/
static unsigned is_delayed_or_event_assign(ivl_scope_t scope,
ivl_statement_t stmt)
{
unsigned wid;
ivl_statement_t assign, delay, delayed_assign;
ivl_statement_type_t delay_type;
ivl_lval_t lval;
ivl_expr_t rval;
ivl_signal_t lsig, rsig;
/* We must have two block elements. */
if (ivl_stmt_block_count(stmt) != 2) return 0;
/* The first must be an assign. */
assign = ivl_stmt_block_stmt(stmt, 0);
if (ivl_statement_type(assign) != IVL_ST_ASSIGN) return 0;
/* The second must be a delayx. */
delay = ivl_stmt_block_stmt(stmt, 1);
delay_type = ivl_statement_type(delay);
if ((delay_type != IVL_ST_DELAYX) &&
(delay_type != IVL_ST_WAIT)) return 0;
/* The statement for the delayx must be an assign. */
delayed_assign = ivl_stmt_sub_stmt(delay);
if (ivl_statement_type(delayed_assign) != IVL_ST_ASSIGN) return 0;
/* The L-value must be a single signal. */
if (ivl_stmt_lvals(assign) != 1) return 0;
lval = ivl_stmt_lval(assign, 0);
/* It must not have an array select. */
if (ivl_lval_idx(lval)) return 0;
/* It must not have a non-zero base. */
if (ivl_lval_part_off(lval)) return 0;
lsig = ivl_lval_sig(lval);
/* It must not be part of the signal. */
if (ivl_lval_width(lval) != ivl_signal_width(lsig)) return 0;
/* The R-value must be a single signal. */
rval = ivl_stmt_rval(delayed_assign);
if (ivl_expr_type(rval) != IVL_EX_SIGNAL) return 0;
/* It must not be an array word. */
if (ivl_expr_oper1(rval)) return 0;
rsig = ivl_expr_signal(rval);
/* The two signals must be the same. */
if (lsig != rsig) return 0;
/* And finally the three statements must have the same line number
* as the block. */
if ((ivl_stmt_lineno(stmt) != ivl_stmt_lineno(assign)) ||
(ivl_stmt_lineno(stmt) != ivl_stmt_lineno(delay)) ||
(ivl_stmt_lineno(stmt) != ivl_stmt_lineno(delayed_assign))) {
return 0;
}
/* The pattern matched so generate the appropriate code. */
fprintf(vlog_out, "%*c", get_indent(), ' ');
wid = emit_stmt_lval(scope, delayed_assign);
fprintf(vlog_out, " = ");
if (delay_type == IVL_ST_DELAYX) {
fprintf(vlog_out, "#(");
emit_scaled_delayx(scope, ivl_stmt_delay_expr(delay), 1);
} else {
fprintf(vlog_out, "@(");
emit_event(scope, delay);
}
fprintf(vlog_out, ") ");
emit_expr(scope, ivl_stmt_rval(assign), wid);
fprintf(vlog_out, ";");
emit_stmt_file_line(stmt);
fprintf(vlog_out, "\n");
return 1;
}