C++ (Cpp) lge_add_pm_devices Examples

Example #1

0

Show file

File: board-msm7x27a_u0.c Project: broneksce/lge_MonsterKernel-KK

static void __init msm7x2x_init(void)
{
	msm7x2x_misc_init();

	/* Initialize regulators first so that other devices can use them */
	msm7x27a_init_regulators();
	msm_adsp_add_pdev();
	if (cpu_is_msm8625())
		msm8625_device_i2c_init();
	else
		msm7x27a_device_i2c_init();
	msm7x27a_init_ebi2();
	msm7x27a_uartdm_config();

	msm7x27a_otg_gadget();
/* LGE_CHANGE_: 2012/11/2 [email protected] U0 Flash Porting */
#ifndef CONFIG_MACH_LGE
	msm7x27a_cfg_smsc911x();
#endif
/* LGE_CHANGE_E: 2012/11/2 [email protected] U0 Flash Porting */

	msm7x27a_add_footswitch_devices();
	msm7x27a_add_platform_devices();
	/* Ensure ar6000pm device is registered before MMC/SDC */
	msm7x27a_init_ar6000pm();
	msm7627a_init_mmc();
	msm_fb_add_devices();
	msm7x2x_init_host();
	msm7x27a_pm_init();
#if defined(CONFIG_I2C) && defined(CONFIG_GPIO_SX150X)
	register_i2c_devices();
#endif
#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
	msm7627a_bt_power_init();
#endif
#ifdef CONFIG_MSM7X27A_AUDIO
	lge_add_sound_devices();
#endif
/* LGE_CHANGE_S: 2012/11/2 [email protected] U0 Flash Porting */
	msm7627a_camera_init();
/* LGE_CHANGE_E: 2012/11/2 [email protected] U0 Flash Porting */
	msm7627a_add_io_devices();
	/*7x25a kgsl initializations*/
	msm7x25a_kgsl_3d0_init();
	/*8x25 kgsl initializations*/
	msm8x25_kgsl_3d0_init();
	lge_add_gpio_i2c_devices();
/* 2012-10-25 [email protected] Boot Mode Check [START] */
#ifdef CONFIG_LGE_POWER_ON_STATUS_PATCH
	lge_board_pwr_on_status();
#endif
#ifdef CONFIG_LGE_BOOT_MODE
	lge_add_boot_mode_devices();
#endif
/* 2012-10-25 [email protected] Boot Mode Check [END] */
#if defined(CONFIG_ANDROID_RAM_CONSOLE) && defined(CONFIG_LGE_HANDLE_PANIC)
	lge_add_panic_handler_devices();
#endif
	lge_add_pm_devices();
}

Example #2

0

Show file

File: board-su370.c Project: edgestorm/lu3700-cm-gin

static void __init msm7x2x_init(void)
{
	msm_clock_init(msm_clocks_7x27, msm_num_clocks_7x27);

#if defined(CONFIG_MSM_SERIAL_DEBUGGER)
	msm_serial_debug_init(MSM_UART1_PHYS, INT_UART1,
			&msm_device_uart1.dev, 1);
#endif

	if (cpu_is_msm7x27())
		msm7x2x_clock_data.max_axi_khz = 200000;

	msm_acpu_clock_init(&msm7x2x_clock_data);

	msm_add_pmem_devices();
	msm_add_fb_device();
#if !defined(CONFIG_MSM_SERIAL_DEBUGGER)
	if (lge_get_uart_mode())
		platform_device_register(&msm_device_uart3);
#endif
	platform_add_devices(devices, ARRAY_SIZE(devices));
#ifdef CONFIG_ARCH_MSM7X27
	msm_add_kgsl_device();
#endif
	msm_add_usb_devices();

#ifdef CONFIG_MSM_CAMERA
	config_camera_off_gpios(); /* might not be necessary */
#endif
	msm_device_i2c_init();
	i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));

	if (cpu_is_msm7x27())
		msm_pm_set_platform_data(msm7x27_pm_data,
					ARRAY_SIZE(msm7x27_pm_data));
	else
		msm_pm_set_platform_data(msm7x25_pm_data,
					ARRAY_SIZE(msm7x25_pm_data));
	msm7x27_wlan_init();

#ifdef CONFIG_ANDROID_RAM_CONSOLE
	lge_add_ramconsole_devices();
	lge_add_ers_devices();
	lge_add_panic_handler_devices();
#endif
	lge_add_camera_devices();
	lge_add_lcd_devices();
	lge_add_btpower_devices();
	lge_add_mmc_devices();
	lge_add_input_devices();
	lge_add_misc_devices();
	lge_add_pm_devices();

	lge_add_gpio_i2c_devices();
	
	create_testmode_status();  
	create_sw_version_status();  
	create_smpl_reset_status();    
	create_qpst_enable_status(); 
}

Example #3

0

Show file

File: board-m3eu.c Project: arjen75/L3_kernel2

static void __init msm7x2x_init(void)
{
	if (socinfo_init() < 0)
		printk(KERN_ERR "%s: socinfo_init() failed!\n",
		       __func__);

	msm_clock_init(msm_clocks_7x27a, msm_num_clocks_7x27a);
	msm_acpu_clock_init(&msm7x2x_clock_data);

	/* Common functions for SURF/FFA/RUMI3 */
	msm_device_i2c_init();

	msm7x27a_init_ebi2();
#ifdef CONFIG_SERIAL_MSM_HS
	msm_uart_dm1_pdata.wakeup_irq = gpio_to_irq(UART1DM_RX_GPIO);
	msm_device_uart_dm1.dev.platform_data = &msm_uart_dm1_pdata;
#endif

	msm_add_pmem_devices();
	msm_add_fb_device();

	platform_add_devices(m3eu_devices,
		ARRAY_SIZE(m3eu_devices));

	/*7x25a kgsl initializations*/
	msm7x25a_kgsl_3d0_init();

	if (lge_get_uart_mode()) {
		if (lge_bd_rev == LGE_REV_A)
			platform_device_register(&msm_device_uart3);
		else
			platform_device_register(&msm_device_uart1);
	}

	lge_add_input_devices();
	lge_add_misc_devices();
	lge_add_mmc_devices();
	lge_add_sound_devices();
	lge_add_lcd_devices();
	lge_add_camera_devices();
	lge_add_pm_devices();
	lge_add_usb_devices();
	lge_add_connectivity_devices(); /* [email protected], for Bluetooth/FM */

	/* gpio i2c devices should be registered at latest point */
	lge_add_gpio_i2c_devices();

	lge_add_ramconsole_devices();
#if defined(CONFIG_ANDROID_RAM_CONSOLE) && defined(CONFIG_LGE_HANDLE_PANIC)
	lge_add_panic_handler_devices();
#endif
/* [email protected] [2011-09-22] - Read power on status and update boot reason */
#ifdef CONFIG_LGE_POWER_ON_STATUS_PATCH
	lge_board_pwr_on_status();
#endif

}

Example #4

0

Show file

File: board-msm7x27a_v1.c Project: paaaz/SKernel

static void __init msm7x2x_init(void)
{
	msm7x2x_misc_init();

	/* Initialize regulators first so that other devices can use them */
	msm7x27a_init_regulators();
/* [LGE_BSP_S] [email protected], 20130212 - RT8966A miniABB regulator */
#ifdef CONFIG_MINIABB_REGULATOR
	init_miniabb_regulators();
#endif /* CONFIG_MINIABB_REGULATOR */
/* [LGE_BSP_E] [email protected], 20130212 - RT8966A miniABB regulator */
	msm_adsp_add_pdev();
	msm7x27a_device_i2c_init();
	msm7x27a_init_ebi2();
	msm7x27a_uartdm_config();

	msm7x27a_otg_gadget();

	msm7x27a_add_footswitch_devices();
	msm7x27a_add_platform_devices();
	/* Ensure ar6000pm device is registered before MMC/SDC */
	msm7x27a_init_ar6000pm();
	msm7627a_init_mmc();
	msm_fb_add_devices();
	msm7x2x_init_host();
	msm7x27a_pm_init();
#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
	msm7627a_bt_power_init();
#endif
#ifdef CONFIG_MSM7X27A_AUDIO //ew0804.kim
	lge_add_sound_devices();
#endif
	msm7627a_camera_init();
	msm7627a_add_io_devices();
	/*7x25a kgsl initializations*/
	msm7x25a_kgsl_3d0_init();
	/*8x25 kgsl initializations*/
	msm8x25_kgsl_3d0_init();
	lge_add_gpio_i2c_devices();
/* 2012-10-25 [email protected] Boot Mode Check [START] */
#ifdef CONFIG_LGE_POWER_ON_STATUS_PATCH
	lge_board_pwr_on_status();
#endif
#ifdef CONFIG_LGE_BOOT_MODE
	lge_add_boot_mode_devices();
#endif
#if defined(CONFIG_ANDROID_RAM_CONSOLE) && defined(CONFIG_LGE_HANDLE_PANIC)
	lge_add_panic_handler_devices();
#endif 

// LGE_CHANGE_S, [email protected],Add pm device	
	lge_add_pm_devices();
// LGE_CHANGE_E, [email protected],Add pm device	
}

Example #5

0

Show file

File: board-msm7x27a_v1.c Project: RolanDroid/lge_MonsterKernel-lproj

static void __init msm7x2x_init(void)
{
	msm7x2x_misc_init();

	msm7x27a_init_regulators();

#ifdef CONFIG_MINIABB_REGULATOR
	init_miniabb_regulators();
#endif
	msm_adsp_add_pdev();

	msm7x27a_device_i2c_init();
	msm7x27a_init_ebi2();
	msm7x27a_uartdm_config();
	msm7x27a_otg_gadget();
	msm7x27a_add_footswitch_devices();
	msm7x27a_add_platform_devices();
	msm7x27a_init_ar6000pm();

	msm7627a_init_mmc();

	msm_fb_add_devices();

	msm7x2x_init_host();
	msm7x27a_pm_init();
#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
	msm7627a_bt_power_init();
#endif
#ifdef CONFIG_MSM7X27A_AUDIO
	lge_add_sound_devices();
#endif
	msm7627a_camera_init();
	msm7627a_add_io_devices();
	msm7x25a_kgsl_3d0_init();
	msm8x25_kgsl_3d0_init();
	lge_add_gpio_i2c_devices();
#ifdef CONFIG_LGE_POWER_ON_STATUS_PATCH
	lge_board_pwr_on_status();
#endif
#ifdef CONFIG_LGE_BOOT_MODE
	lge_add_boot_mode_devices();
#endif
#if defined(CONFIG_ANDROID_RAM_CONSOLE) && defined(CONFIG_LGE_HANDLE_PANIC)
	lge_add_panic_handler_devices();
#endif
	lge_add_pm_devices();
}

Example #6

0

Show file

File: board-thunderg.c Project: Axelfox/2.6.35

static void __init msm7x2x_init(void)
{
	if (socinfo_init() < 0)
		BUG();

	msm_clock_init(msm_clocks_7x27, msm_num_clocks_7x27);

#if defined(CONFIG_MSM_SERIAL_DEBUGGER)
	msm_serial_debug_init(MSM_UART3_PHYS, INT_UART3,
			&msm_device_uart3.dev, 1);
#endif

	if (cpu_is_msm7x27())
		msm7x2x_clock_data.max_axi_khz = 200000;

	msm_acpu_clock_init(&msm7x2x_clock_data);

	msm_add_pmem_devices();
	msm_add_fb_device();
#if !defined(CONFIG_MSM_SERIAL_DEBUGGER)
	if (lge_get_uart_mode())
		platform_device_register(&msm_device_uart3);
#endif
	platform_add_devices(devices, ARRAY_SIZE(devices));
#ifdef CONFIG_ARCH_MSM7X27
	msm_add_kgsl_device();
#endif
	msm_add_usb_devices();

#ifdef CONFIG_MSM_CAMERA
	config_camera_off_gpios(); /* might not be necessary */
#endif
	msm_device_i2c_init();
	i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices));

	if (cpu_is_msm7x27())
		msm_pm_set_platform_data(msm7x27_pm_data,
					ARRAY_SIZE(msm7x27_pm_data));
	else
		msm_pm_set_platform_data(msm7x25_pm_data,
					ARRAY_SIZE(msm7x25_pm_data));
	msm7x27_wlan_init();

	swift_init_gpio_i2c_devices();

#ifdef CONFIG_ANDROID_RAM_CONSOLE
	lge_add_ramconsole_devices();
	lge_add_ers_devices();
	lge_add_panic_handler_devices();
#endif
	lge_add_camera_devices();
	lge_add_lcd_devices();
	lge_add_btpower_devices();
	lge_add_mmc_devices();
	lge_add_input_devices();
	lge_add_misc_devices();
	lge_add_pm_devices();

	/* gpio i2c devices should be registered at latest point */
	lge_add_gpio_i2c_devices();
	
	/* initialize timed_output vibrator */
	swift_init_timed_vibrator();
}