C++ (Cpp) lm3630_hw_reset Examples

Example #1

0

Show file

void lm3630_backlight_on(int level)
{

	if (backlight_status == BL_OFF) {

		pr_info("%s with level %d\n", __func__, level);
		lm3630_hw_reset();

		/*  OVP(24V),OCP(1.0A) , Boost Frequency(500khz) */
		lm3630_write_reg(main_lm3630_dev->client, 0x02, 0x30);

		if( lm3630_pwm_enable ) {
			/* eble Feedback , disable  PWM for BANK A,B */
			lm3630_write_reg(main_lm3630_dev->client, 0x01, 0x09);
		}
		else {
			/* eble Feedback , disable  PWM for BANK A,B */
			lm3630_write_reg(main_lm3630_dev->client, 0x01, 0x08);
		}

		/* Brightness Code Setting Max on Bank A */
		/* Full-Scale Current (20.2mA) of BANK A */
		/* 20.2mA : 0x13 , 23.4mA : 0x17 */
		lm3630_write_reg(main_lm3630_dev->client, 0x05, 0x16);

		/* Enable LED A to Exponential, LED2 is connected to BANK_A */
		lm3630_write_reg(main_lm3630_dev->client, 0x00, 0x15);
	}
	mdelay(1);

	lm3630_set_main_current_level(main_lm3630_dev->client, level);
	backlight_status = BL_ON;

	return;
}

Example #2

0

Show file

File: lm3630_bl.c Project: jdongyun/Zeta-Chromium-N5

static void lm3630_hw_init(struct lm3630_device *dev)
{
	lm3630_hw_reset(dev);
	lm3630_write_reg(dev->client, BOOST_CTL_REG, dev->boost_ctrl_reg);
	lm3630_write_reg(dev->client, CONFIG_REG, dev->cfg_reg);
	if (!backlight_dimmer)
		lm3630_set_max_current_reg(dev, dev->max_current);
	lm3630_write_reg(dev->client, CONTROL_REG, dev->ctrl_reg);
	mdelay(1);
}

Example #3

0

Show file

File: lm3630.c Project: mau-fleitas/cm12_d620

void lm3630_backlight_on(int level)
{
	hw_rev_type hw_rev;
	hw_rev = lge_get_board_revno();

	if (backlight_status == BL_OFF) {

		pr_info("%s with level %d\n", __func__, level);
		lm3630_hw_reset();

		/*  OVP(24V),OCP(1.0A) , Boost Frequency(500khz) */
#if !defined(CONFIG_MACH_MSM8926_B1L_VZW) && !defined(CONFIG_MACH_MSM8926_B1L_ATT)
		lm3630_write_reg(main_lm3630_dev->client, 0x02, 0x30);
#else
		lm3630_write_reg(main_lm3630_dev->client, 0x02, 0x50);  /*B1L Rev0,A... OVP = 32V */
#endif

		if( lm3630_pwm_enable ) {
			/* eble Feedback , disable  PWM for BANK A,B */
			lm3630_write_reg(main_lm3630_dev->client, 0x01, 0x09);
		}
		else {
			/* eble Feedback , disable  PWM for BANK A,B */
			lm3630_write_reg(main_lm3630_dev->client, 0x01, 0x08);
		}

		/* Brightness Code Setting Max on Bank A */
		/* Full-Scale Current (20.2mA) of BANK A */
		/* 20.2mA : 0x13 , 23.4mA : 0x17 */
		lm3630_write_reg(main_lm3630_dev->client, 0x05, 0x16);

		/* Enable LED A to Exponential, LED2 is connected to BANK_A */
#if !defined(CONFIG_MACH_MSM8926_B1L_VZW) && !defined(CONFIG_MACH_MSM8926_B1L_ATT)
		lm3630_write_reg(main_lm3630_dev->client, 0x00, 0x15);
#else
		if(HW_REV_0 == hw_rev)
    	{
    		pr_info("%s HW_REV_0\n", __func__);
			lm3630_write_reg(main_lm3630_dev->client, 0x00, 0x14 /*0x14*/); /* 0x15 : enable BANK A | enable LED A */
		}
		else
		{
			pr_info("%s HW_REV_A\n", __func__);
			lm3630_write_reg(main_lm3630_dev->client, 0x00, 0x15 /*0x14*/); /* 0x15 : enable BANK A | enable LED A | LED2 on BANK A */
		}
#endif
	}
	mdelay(1);

	lm3630_set_main_current_level(main_lm3630_dev->client, level);
	backlight_status = BL_ON;

	return;
}

Example #4

0

Show file

File: lm3630.c Project: Rashed97/lge_d295

void lm3630_backlight_on(int level)
{
	hw_rev_type hw_rev;
	hw_rev = lge_get_board_revno();

	if (backlight_status == BL_OFF) {

		pr_info("%s with level %d\n", __func__, level);
		lm3630_hw_reset();

#if defined(CONFIG_MACH_MSM8226_E7WIFI) || defined(CONFIG_MACH_MSM8226_E8WIFI) || defined (CONFIG_MACH_MSM8926_E8LTE_KR) || defined(CONFIG_MACH_MSM8926_E8LTE) || defined ( CONFIG_MACH_MSM8926_E7LTE_ATT_US) || defined(CONFIG_MACH_MSM8926_E7LTE_VZW_US) || defined (CONFIG_MACH_MSM8926_E7LTE_USC_US)
		lm3630_write_reg(main_lm3630_dev->client, 0x02, 0x50); //OVP 32V, OCP 1.0A Boost Freq. 500Khz

		if( lm3630_pwm_enable ) {
			/* Enble Feedback , disable	PWM for BANK A,B */
			lm3630_write_reg(main_lm3630_dev->client, 0x01, 0x09);
		}
		else {
			/* Enble Feedback , disable	PWM for BANK A,B */
			lm3630_write_reg(main_lm3630_dev->client, 0x01, 0x08);
		}

		lm3630_write_reg(main_lm3630_dev->client, 0x05, 0x13); //Full Scale Current 20.2mA, Brightness Code Setting Max on Bank A
		lm3630_write_reg(main_lm3630_dev->client, 0x00, 0x15); //Enable Bank A | LED A | LED1,2 on Bank A
#else

		/*  OVP(24V),OCP(1.0A) , Boost Frequency(500khz) */
#if !defined(CONFIG_MACH_MSM8926_X10_VZW) && !defined(CONFIG_MACH_MSM8926_B2L_ATT) && !defined(CONFIG_MACH_MSM8926_B2LN_KR) || defined(CONFIG_MACH_MSM8926_JAGNM_ATT) || defined(CONFIG_MACH_MSM8926_JAGN_KR) || defined(CONFIG_MACH_MSM8926_JAGNM_GLOBAL_COM) || defined(CONFIG_MACH_MSM8926_JAGNM_KDDI_JP) || defined(CONFIG_MACH_MSM8926_AKA_KR)  || defined(CONFIG_MACH_MSM8926_F60S_JP)
		lm3630_write_reg(main_lm3630_dev->client, 0x02, 0x30);
#else
		lm3630_write_reg(main_lm3630_dev->client, 0x02, 0x50);  /*B1L Rev0,A... OVP = 32V */
#endif

		if( lm3630_pwm_enable ) {
			/* eble Feedback , disable  PWM for BANK A,B */
			lm3630_write_reg(main_lm3630_dev->client, 0x01, 0x09);
		}
		else {
			/* eble Feedback , disable  PWM for BANK A,B */
			lm3630_write_reg(main_lm3630_dev->client, 0x01, 0x08);
		}

		/* Brightness Code Setting Max on Bank A */
		/* Full-Scale Current (20.2mA) of BANK A */
		/* 20.2mA : 0x13 , 23.4mA : 0x17 */
		lm3630_write_reg(main_lm3630_dev->client, 0x05, 0x16);

		/* Enable LED A to Exponential, LED2 is connected to BANK_A */
#if !defined(CONFIG_MACH_MSM8926_X10_VZW) && !defined(CONFIG_MACH_MSM8926_B2L_ATT) && !defined(CONFIG_MACH_MSM8926_B2LN_KR) || defined(CONFIG_MACH_MSM8926_JAGNM_ATT) || defined(CONFIG_MACH_MSM8926_JAGN_KR) || defined(CONFIG_MACH_MSM8926_JAGNM_GLOBAL_COM) || defined(CONFIG_MACH_MSM8926_JAGNM_KDDI_JP) || defined(CONFIG_MACH_MSM8926_AKA_KR)  || defined(CONFIG_MACH_MSM8926_F60S_JP)
		lm3630_write_reg(main_lm3630_dev->client, 0x00, 0x15);
#else
		if(HW_REV_0 == hw_rev)
    	{
    		pr_info("%s HW_REV_0\n", __func__);
			lm3630_write_reg(main_lm3630_dev->client, 0x00, 0x14 /*0x14*/); /* 0x15 : enable BANK A | enable LED A */
		}
		else
		{
			pr_info("%s HW_REV_A\n", __func__);
			lm3630_write_reg(main_lm3630_dev->client, 0x00, 0x15 /*0x14*/); /* 0x15 : enable BANK A | enable LED A | LED2 on BANK A */
		}
#endif
#endif//defined( CONFIG_MACH_MSM8226_E7WIFI ) || defined ( CONFIG_MACH_MSM8926_E7LTE)

	}
	mdelay(1);

	lm3630_set_main_current_level(main_lm3630_dev->client, level);
	backlight_status = BL_ON;

	return;
}