void setup(void)
{
/*
Test Envionment, ATMEGA with the following settings:
CS: PORTB, Bit 2
A0: PORTB, Bit 1
SCK: PORTB, Bit 5
MOSI: PORTB, Bit 3
*/
/* 1. Setup and create u8g device: http://code.google.com/p/u8glib/wiki/avr#U8glib_Init */
/* u8g_InitSPI(&u8g, &u8g_dev_st7565_dogm132_sw_spi, PN(1, 5), PN(1, 3), PN(1, 2), PN(1, 1), U8G_PIN_NONE); */
u8g_InitHWSPI(&u8g, &u8g_dev_st7565_dogm132_hw_spi, PN(1, 2), PN(1, 1), U8G_PIN_NONE);
/* 2. Setup m2 */
m2_Init(&top_el_pin_list, m2_es_avr_u8g, m2_eh_4bs, m2_gh_u8g_bfs);
//m2_Init(&top_el_pin_list, m2_es_avr_rotary_encoder_u8g, m2_eh_4bd, m2_gh_u8g_bfs);
/* 3. Connect u8g display to m2 */
m2_SetU8g(&u8g, m2_u8g_box_icon);
/* 4. Set a font, use normal u8g_font's */
m2_SetFont(0, (const void *)u8g_font_5x8r);
/* 5. Define keys (PN() description, see http://code.google.com/p/u8glib/wiki/avr#U8glib_Init) */
m2_SetPin(M2_KEY_EXIT, PN(3, 5));
m2_SetPin(M2_KEY_SELECT, PN(3, 6));
m2_SetPin(M2_KEY_NEXT, PN(3, 7));
m2_SetPin(M2_KEY_PREV, PN(1, 7));
}
void setup(void) {
/*
Test Envionment, ATMEGA with the following settings:
CS: PORTB, Bit 2
A0: PORTB, Bit 1
SCK: PORTB, Bit 5
MOSI: PORTB, Bit 3
*/
/* 1. Setup and create u8g device */
/* u8g_InitSPI(&u8g, &u8g_dev_st7565_dogm132_sw_spi, PN(1, 5), PN(1, 3), PN(1, 2), PN(1, 1), U8G_PIN_NONE); */
u8g_InitHWSPI(&u8g, &u8g_dev_st7565_dogm132_hw_spi, PN(1, 2), PN(1, 1), U8G_PIN_NONE);
/* 2. Setup m2 */
m2_Init(&el_top, m2_es_avr_u8g, m2_eh_4bs, m2_gh_u8g_bfs);
/* 3. Connect u8g display to m2 */
m2_SetU8g(&u8g, m2_u8g_box_icon);
/* 4. Set a font, use normal u8g_font's */
m2_SetFont(0, (const void *)u8g_font_5x8r);
/* 5. Define keys */
m2_SetPin(M2_KEY_EXIT, PN(3, 5));
m2_SetPin(M2_KEY_SELECT, PN(3, 6));
m2_SetPin(M2_KEY_NEXT, PN(3, 7));
m2_SetPin(M2_KEY_PREV, PN(1, 7));
}
int main(void)
{
/* this is the setup sequence, steps 1..4 should be in this order */
/* 1. Setup and create device access */
u8g_Init(&u8g, &u8g_dev_sdl_1bit);
/* 2. Now, setup m2 */
m2_Init(&top_el_tlsm, m2_es_sdl, m2_eh_6bs, m2_gh_u8g_bfs);
//m2_Init(&top_el_tlsm, m2_es_sdl, m2_eh_6bs, m2_gh_tty);
//m2_Init(&el_top_fs, m2_es_sdl, m2_eh_6bs, m2_gh_u8g_bfs);
/* 3. Connect the u8g display to m2. */
m2_SetU8g(&u8g, m2_u8g_box_icon);
/* 4. And finally, set at least one font, use normal u8g_font's */
m2_SetFont(0, (const void *)u8g_font_7x13);
m2_SetFont(2, (const void *)u8g_font_fub25);
m2_SetU8gToggleFontIcon(u8g_font_7x13_75r, active_encoding, inactive_encoding);
m2_SetU8gRadioFontIcon(u8g_font_7x13_75r, active_encoding, inactive_encoding);
// m2_SetU8gAdditionalReadOnlyXBorder(0);
/* set the font for the multi selection */
m2_SetFont(3, (const void *)u8g_font_m2icon_7);
mas_Init(mas_device_sim, 0);
for(;;)
{
m2_CheckKey();
if ( m2_HandleKey() ) {
u8g_FirstPage(&u8g);
do{
//u8g_SetFont(&u8g, u8g_font_unifont);
//u8g_DrawStr(&u8g, 0, 20, "Hello World!");
m2_CheckKey();
m2_Draw();
} while( u8g_NextPage(&u8g) );
}
}
return 0;
}
