static bool baroCheck(orb_advert_t *mavlink_log_pub, unsigned instance, bool optional, int &device_id, bool report_fail)
{
bool success = true;
char s[30];
sprintf(s, "%s%u", BARO_BASE_DEVICE_PATH, instance);
DevHandle h;
DevMgr::getHandle(s, h);
if (!h.isValid()) {
if (!optional) {
if (report_fail) {
mavlink_and_console_log_critical(mavlink_log_pub, "PREFLIGHT FAIL: NO BARO SENSOR #%u", instance);
}
}
return false;
}
device_id = -1000;
// TODO: There is no baro calibration yet, since no external baros exist
// int ret = check_calibration(fd, "CAL_BARO%u_ID");
// if (ret) {
// mavlink_and_console_log_critical(mavlink_log_pub, "PREFLIGHT FAIL: BARO #%u UNCALIBRATED", instance);
// success = false;
// goto out;
// }
//out:
DevMgr::releaseHandle(h);
return success;
}
static bool gnssCheck(int mavlink_fd)
{
bool success = true;
int gpsSub = orb_subscribe(ORB_ID(vehicle_gps_position));
//Wait up to 2000ms to allow the driver to detect a GNSS receiver module
px4_pollfd_struct_t fds[1];
fds[0].fd = gpsSub;
fds[0].events = POLLIN;
if(px4_poll(fds, 1, 2000) <= 0) {
success = false;
}
else {
struct vehicle_gps_position_s gps;
if ( (OK != orb_copy(ORB_ID(vehicle_gps_position), gpsSub, &gps)) ||
(hrt_elapsed_time(&gps.timestamp_position) > 1000000)) {
success = false;
}
}
//Report failure to detect module
if(!success) {
mavlink_and_console_log_critical(mavlink_fd, "PREFLIGHT FAIL: GPS RECEIVER MISSING");
}
px4_close(gpsSub);
return success;
}
void BlockLocalPositionEstimator::flowCheckTimeout()
{
if (_timeStamp - _time_last_flow > FLOW_TIMEOUT) {
if (_flowInitialized) {
flowDeinit();
mavlink_and_console_log_critical(&mavlink_log_pub, "[lpe] flow timeout ");
}
}
}
static bool magnometerCheck(int mavlink_fd, unsigned instance, bool optional)
{
bool success = true;
char s[30];
sprintf(s, "%s%u", MAG_BASE_DEVICE_PATH, instance);
int fd = open(s, 0);
if (fd < 0) {
if (!optional) {
mavlink_and_console_log_critical(mavlink_fd,
"PREFLIGHT FAIL: NO MAG SENSOR #%u", instance);
}
return false;
}
int calibration_devid;
int ret;
int devid = ioctl(fd, DEVIOCGDEVICEID, 0);
sprintf(s, "CAL_MAG%u_ID", instance);
param_get(param_find(s), &(calibration_devid));
if (devid != calibration_devid) {
mavlink_and_console_log_critical(mavlink_fd,
"PREFLIGHT FAIL: MAG #%u UNCALIBRATED", instance);
success = false;
goto out;
}
ret = ioctl(fd, MAGIOCSELFTEST, 0);
if (ret != OK) {
mavlink_and_console_log_critical(mavlink_fd,
"PREFLIGHT FAIL: MAG #%u SELFTEST FAILED", instance);
success = false;
goto out;
}
out:
close(fd);
return success;
}
void BlockLocalPositionEstimator::visionCheckTimeout()
{
if (_timeStamp - _time_last_vision_p > VISION_TIMEOUT) {
if (_visionInitialized) {
_visionInitialized = false;
_visionStats.reset();
mavlink_and_console_log_critical(&mavlink_log_pub, "[lpe] vision position timeout ");
}
}
}
static bool gyroCheck(orb_advert_t *mavlink_log_pub, unsigned instance, bool optional, int &device_id, bool report_fail)
{
bool success = true;
char s[30];
sprintf(s, "%s%u", GYRO_BASE_DEVICE_PATH, instance);
DevHandle h;
DevMgr::getHandle(s, h);
if (!h.isValid()) {
if (!optional) {
if (report_fail) {
mavlink_and_console_log_critical(mavlink_log_pub, "PREFLIGHT FAIL: NO GYRO SENSOR #%u", instance);
}
}
return false;
}
int ret = check_calibration(h, "CAL_GYRO%u_ID", device_id);
if (ret) {
if (report_fail) {
mavlink_and_console_log_critical(mavlink_log_pub, "PREFLIGHT FAIL: GYRO #%u UNCALIBRATED", instance);
}
success = false;
goto out;
}
ret = h.ioctl(GYROIOCSELFTEST, 0);
if (ret != OK) {
if (report_fail) {
mavlink_and_console_log_critical(mavlink_log_pub, "PREFLIGHT FAIL: GYRO #%u SELFTEST FAILED", instance);
}
success = false;
goto out;
}
out:
DevMgr::releaseHandle(h);
return success;
}
void
Mission::reset_offboard_mission(struct mission_s &mission)
{
dm_lock(DM_KEY_MISSION_STATE);
if (dm_read(DM_KEY_MISSION_STATE, 0, &mission, sizeof(mission_s)) == sizeof(mission_s)) {
if (mission.dataman_id >= 0 && mission.dataman_id <= 1) {
/* set current item to 0 */
mission.current_seq = 0;
/* reset jump counters */
if (mission.count > 0) {
dm_item_t dm_current = DM_KEY_WAYPOINTS_OFFBOARD(mission.dataman_id);
for (unsigned index = 0; index < mission.count; index++) {
struct mission_item_s item;
const ssize_t len = sizeof(struct mission_item_s);
if (dm_read(dm_current, index, &item, len) != len) {
PX4_WARN("could not read mission item during reset");
break;
}
if (item.nav_cmd == NAV_CMD_DO_JUMP) {
item.do_jump_current_count = 0;
if (dm_write(dm_current, index, DM_PERSIST_POWER_ON_RESET,
&item, len) != len) {
PX4_WARN("could not save mission item during reset");
break;
}
}
}
}
} else {
mavlink_and_console_log_critical(_navigator->get_mavlink_log_pub(), "ERROR: could not read mission");
/* initialize mission state in dataman */
mission.dataman_id = 0;
mission.count = 0;
mission.current_seq = 0;
}
dm_write(DM_KEY_MISSION_STATE, 0, DM_PERSIST_POWER_ON_RESET, &mission, sizeof(mission_s));
}
dm_unlock(DM_KEY_MISSION_STATE);
}
static bool airspeedCheck(orb_advert_t *mavlink_log_pub, bool optional, bool report_fail)
{
bool success = true;
int ret;
int fd = orb_subscribe(ORB_ID(airspeed));
struct airspeed_s airspeed;
if ((ret = orb_copy(ORB_ID(airspeed), fd, &airspeed)) ||
(hrt_elapsed_time(&airspeed.timestamp) > (500 * 1000))) {
if (report_fail) {
mavlink_and_console_log_critical(mavlink_log_pub, "PREFLIGHT FAIL: AIRSPEED SENSOR MISSING");
}
success = false;
goto out;
}
if (fabsf(airspeed.confidence) < 0.99f) {
if (report_fail) {
mavlink_and_console_log_critical(mavlink_log_pub, "PREFLIGHT FAIL: AIRSPEED SENSOR COMM ERROR");
}
success = false;
goto out;
}
if (fabsf(airspeed.indicated_airspeed_m_s) > 6.0f) {
if (report_fail) {
mavlink_and_console_log_critical(mavlink_log_pub, "AIRSPEED WARNING: WIND OR CALIBRATION ISSUE");
}
// XXX do not make this fatal yet
}
out:
px4_close(fd);
return success;
}
static bool baroCheck(int mavlink_fd, unsigned instance, bool optional)
{
bool success = true;
char s[30];
sprintf(s, "%s%u", BARO_BASE_DEVICE_PATH, instance);
int fd = open(s, 0);
if (fd < 0) {
if (!optional) {
mavlink_and_console_log_critical(mavlink_fd,
"PREFLIGHT FAIL: NO BARO SENSOR #%u", instance);
}
return false;
}
close(fd);
return success;
}
int preflight_check(const struct vehicle_status_s *status, const int mavlink_fd, bool prearm, bool force_report)
{
/*
*/
bool reportFailures = force_report || (!status->data_link_lost &&
!status->condition_system_prearm_error_reported && status->condition_system_hotplug_timeout);
bool checkAirspeed = false;
/* Perform airspeed check only if circuit breaker is not
* engaged and it's not a rotary wing */
if (!status->circuit_breaker_engaged_airspd_check && (!status->is_rotary_wing || status->is_vtol)) {
checkAirspeed = true;
}
bool preflight_ok = Commander::preflightCheck(mavlink_fd, true, true, true, true, checkAirspeed, !(status->rc_input_mode == vehicle_status_s::RC_IN_MODE_OFF), !status->circuit_breaker_engaged_gpsfailure_check, true, reportFailures);
if (!status->cb_usb && status->usb_connected && prearm) {
preflight_ok = false;
if(reportFailures) mavlink_and_console_log_critical(mavlink_fd, "NOT ARMING: Flying with USB connected prohibited");
}
return !preflight_ok;
}
int do_esc_calibration(orb_advert_t *mavlink_log_pub, struct actuator_armed_s* armed)
{
int return_code = OK;
int fd = -1;
struct battery_status_s battery;
int batt_sub = -1;
bool batt_updated = false;
bool batt_connected = false;
hrt_abstime battery_connect_wait_timeout = 30000000;
hrt_abstime pwm_high_timeout = 10000000;
hrt_abstime timeout_start;
mavlink_and_console_log_info(mavlink_log_pub, CAL_QGC_STARTED_MSG, "esc");
batt_sub = orb_subscribe(ORB_ID(battery_status));
if (batt_sub < 0) {
mavlink_and_console_log_critical(mavlink_log_pub, CAL_QGC_FAILED_MSG, "Subscribe to battery");
goto Error;
}
// Make sure battery is disconnected
orb_copy(ORB_ID(battery_status), batt_sub, &battery);
if (battery.voltage_filtered_v > 3.0f) {
mavlink_and_console_log_critical(mavlink_log_pub, CAL_QGC_FAILED_MSG, "Disconnect battery and try again");
goto Error;
}
armed->in_esc_calibration_mode = true;
fd = px4_open(PWM_OUTPUT0_DEVICE_PATH, 0);
if (fd < 0) {
mavlink_and_console_log_critical(mavlink_log_pub, CAL_QGC_FAILED_MSG, "Can't open PWM device");
goto Error;
}
/* tell IO/FMU that its ok to disable its safety with the switch */
if (px4_ioctl(fd, PWM_SERVO_SET_ARM_OK, 0) != OK) {
mavlink_and_console_log_critical(mavlink_log_pub, CAL_QGC_FAILED_MSG, "Unable to disable safety switch");
goto Error;
}
/* tell IO/FMU that the system is armed (it will output values if safety is off) */
if (px4_ioctl(fd, PWM_SERVO_ARM, 0) != OK) {
mavlink_and_console_log_critical(mavlink_log_pub, CAL_QGC_FAILED_MSG, "Unable to arm system");
goto Error;
}
/* tell IO to switch off safety without using the safety switch */
if (px4_ioctl(fd, PWM_SERVO_SET_FORCE_SAFETY_OFF, 0) != OK) {
mavlink_and_console_log_critical(mavlink_log_pub, CAL_QGC_FAILED_MSG, "Unable to force safety off");
goto Error;
}
mavlink_and_console_log_info(mavlink_log_pub, "[cal] Connect battery now");
timeout_start = hrt_absolute_time();
while (true) {
// We are either waiting for the user to connect the battery. Or we are waiting to let the PWM
// sit high.
hrt_abstime timeout_wait = batt_connected ? pwm_high_timeout : battery_connect_wait_timeout;
if (hrt_absolute_time() - timeout_start > timeout_wait) {
if (!batt_connected) {
mavlink_and_console_log_critical(mavlink_log_pub, CAL_QGC_FAILED_MSG, "Timeout waiting for battery");
goto Error;
}
// PWM was high long enough
break;
}
if (!batt_connected) {
orb_check(batt_sub, &batt_updated);
if (batt_updated) {
orb_copy(ORB_ID(battery_status), batt_sub, &battery);
if (battery.voltage_filtered_v > 3.0f) {
// Battery is connected, signal to user and start waiting again
batt_connected = true;
timeout_start = hrt_absolute_time();
mavlink_and_console_log_info(mavlink_log_pub, "[cal] Battery connected");
}
}
}
usleep(50000);
}
Out:
if (batt_sub != -1) {
orb_unsubscribe(batt_sub);
}
if (fd != -1) {
if (px4_ioctl(fd, PWM_SERVO_SET_FORCE_SAFETY_ON, 0) != OK) {
mavlink_and_console_log_info(mavlink_log_pub, CAL_QGC_WARNING_MSG, "Safety switch still off");
}
if (px4_ioctl(fd, PWM_SERVO_DISARM, 0) != OK) {
mavlink_and_console_log_info(mavlink_log_pub, CAL_QGC_WARNING_MSG, "Servos still armed");
}
if (px4_ioctl(fd, PWM_SERVO_CLEAR_ARM_OK, 0) != OK) {
mavlink_and_console_log_info(mavlink_log_pub, CAL_QGC_WARNING_MSG, "Safety switch still deactivated");
}
px4_close(fd);
}
armed->in_esc_calibration_mode = false;
if (return_code == OK) {
mavlink_and_console_log_info(mavlink_log_pub, CAL_QGC_DONE_MSG, "esc");
}
return return_code;
Error:
return_code = ERROR;
goto Out;
}
int do_accel_calibration_measurements(int mavlink_fd, float (&accel_offs)[max_sens][3], float (&accel_T)[max_sens][3][3], unsigned *active_sensors)
{
const unsigned samples_num = 3000;
*active_sensors = 0;
float accel_ref[max_sens][6][3];
bool data_collected[6] = { false, false, false, false, false, false };
const char *orientation_strs[6] = { "back", "front", "left", "right", "up", "down" };
int subs[max_sens];
uint64_t timestamps[max_sens];
for (unsigned i = 0; i < max_sens; i++) {
subs[i] = orb_subscribe_multi(ORB_ID(sensor_accel), i);
/* store initial timestamp - used to infer which sensors are active */
struct accel_report arp = {};
(void)orb_copy(ORB_ID(sensor_accel), subs[i], &arp);
timestamps[i] = arp.timestamp;
}
unsigned done_count = 0;
int res = OK;
while (true) {
bool done = true;
unsigned old_done_count = done_count;
done_count = 0;
for (int i = 0; i < 6; i++) {
if (data_collected[i]) {
done_count++;
} else {
done = false;
}
}
if (old_done_count != done_count) {
mavlink_and_console_log_info(mavlink_fd, CAL_PROGRESS_MSG, sensor_name, 17 * done_count);
}
if (done) {
break;
}
/* inform user which axes are still needed */
mavlink_and_console_log_info(mavlink_fd, "pending: %s%s%s%s%s%s",
(!data_collected[5]) ? "down " : "",
(!data_collected[0]) ? "back " : "",
(!data_collected[1]) ? "front " : "",
(!data_collected[2]) ? "left " : "",
(!data_collected[3]) ? "right " : "",
(!data_collected[4]) ? "up " : "");
/* allow user enough time to read the message */
sleep(3);
int orient = detect_orientation(mavlink_fd, subs);
if (orient < 0) {
mavlink_and_console_log_info(mavlink_fd, "invalid motion, hold still...");
sleep(3);
continue;
}
/* inform user about already handled side */
if (data_collected[orient]) {
mavlink_and_console_log_info(mavlink_fd, "%s side done, rotate to a different side", orientation_strs[orient]);
sleep(3);
continue;
}
mavlink_and_console_log_info(mavlink_fd, "Hold still, starting to measure %s side", orientation_strs[orient]);
sleep(1);
read_accelerometer_avg(subs, accel_ref, orient, samples_num);
mavlink_and_console_log_info(mavlink_fd, "result for %s side: [ %.2f %.2f %.2f ]", orientation_strs[orient],
(double)accel_ref[0][orient][0],
(double)accel_ref[0][orient][1],
(double)accel_ref[0][orient][2]);
data_collected[orient] = true;
tune_neutral(true);
}
/* close all subscriptions */
for (unsigned i = 0; i < max_sens; i++) {
/* figure out which sensors were active */
struct accel_report arp = {};
(void)orb_copy(ORB_ID(sensor_accel), subs[i], &arp);
if (arp.timestamp != 0 && timestamps[i] != arp.timestamp) {
(*active_sensors)++;
}
close(subs[i]);
}
if (res == OK) {
/* calculate offsets and transform matrix */
for (unsigned i = 0; i < (*active_sensors); i++) {
res = calculate_calibration_values(i, accel_ref, accel_T, accel_offs, CONSTANTS_ONE_G);
/* verbose output on the console */
printf("accel_T transformation matrix:\n");
for (unsigned j = 0; j < 3; j++) {
printf(" %8.4f %8.4f %8.4f\n", (double)accel_T[i][j][0], (double)accel_T[i][j][1], (double)accel_T[i][j][2]);
}
printf("\n");
if (res != OK) {
mavlink_and_console_log_critical(mavlink_fd, "ERROR: calibration values calculation error");
break;
}
}
}
return res;
}
/**
* Wait for vehicle become still and detect it's orientation.
*
* @param mavlink_fd the MAVLink file descriptor to print output to
* @param subs the accelerometer subscriptions. Only the first one will be used.
*
* @return 0..5 according to orientation when vehicle is still and ready for measurements,
* ERROR if vehicle is not still after 30s or orientation error is more than 5m/s^2
*/
int detect_orientation(int mavlink_fd, int (&subs)[max_sens])
{
const unsigned ndim = 3;
struct accel_report sensor;
/* exponential moving average of accel */
float accel_ema[ndim] = { 0.0f };
/* max-hold dispersion of accel */
float accel_disp[3] = { 0.0f, 0.0f, 0.0f };
/* EMA time constant in seconds*/
float ema_len = 0.5f;
/* set "still" threshold to 0.25 m/s^2 */
float still_thr2 = powf(0.25f, 2);
/* set accel error threshold to 5m/s^2 */
float accel_err_thr = 5.0f;
/* still time required in us */
hrt_abstime still_time = 2000000;
struct pollfd fds[1];
fds[0].fd = subs[0];
fds[0].events = POLLIN;
hrt_abstime t_start = hrt_absolute_time();
/* set timeout to 30s */
hrt_abstime timeout = 30000000;
hrt_abstime t_timeout = t_start + timeout;
hrt_abstime t = t_start;
hrt_abstime t_prev = t_start;
hrt_abstime t_still = 0;
unsigned poll_errcount = 0;
while (true) {
/* wait blocking for new data */
int poll_ret = poll(fds, 1, 1000);
if (poll_ret) {
orb_copy(ORB_ID(sensor_accel), subs[0], &sensor);
t = hrt_absolute_time();
float dt = (t - t_prev) / 1000000.0f;
t_prev = t;
float w = dt / ema_len;
for (unsigned i = 0; i < ndim; i++) {
float di = 0.0f;
switch (i) {
case 0:
di = sensor.x;
break;
case 1:
di = sensor.y;
break;
case 2:
di = sensor.z;
break;
}
float d = di - accel_ema[i];
accel_ema[i] += d * w;
d = d * d;
accel_disp[i] = accel_disp[i] * (1.0f - w);
if (d > still_thr2 * 8.0f) {
d = still_thr2 * 8.0f;
}
if (d > accel_disp[i]) {
accel_disp[i] = d;
}
}
/* still detector with hysteresis */
if (accel_disp[0] < still_thr2 &&
accel_disp[1] < still_thr2 &&
accel_disp[2] < still_thr2) {
/* is still now */
if (t_still == 0) {
/* first time */
mavlink_and_console_log_info(mavlink_fd, "detected rest position, hold still...");
t_still = t;
t_timeout = t + timeout;
} else {
/* still since t_still */
if (t > t_still + still_time) {
/* vehicle is still, exit from the loop to detection of its orientation */
break;
}
}
} else if (accel_disp[0] > still_thr2 * 4.0f ||
accel_disp[1] > still_thr2 * 4.0f ||
accel_disp[2] > still_thr2 * 4.0f) {
/* not still, reset still start time */
if (t_still != 0) {
mavlink_and_console_log_info(mavlink_fd, "detected motion, hold still...");
sleep(3);
t_still = 0;
}
}
} else if (poll_ret == 0) {
poll_errcount++;
}
if (t > t_timeout) {
poll_errcount++;
}
if (poll_errcount > 1000) {
mavlink_and_console_log_critical(mavlink_fd, CAL_FAILED_SENSOR_MSG);
return ERROR;
}
}
if (fabsf(accel_ema[0] - CONSTANTS_ONE_G) < accel_err_thr &&
fabsf(accel_ema[1]) < accel_err_thr &&
fabsf(accel_ema[2]) < accel_err_thr) {
return 0; // [ g, 0, 0 ]
}
if (fabsf(accel_ema[0] + CONSTANTS_ONE_G) < accel_err_thr &&
fabsf(accel_ema[1]) < accel_err_thr &&
fabsf(accel_ema[2]) < accel_err_thr) {
return 1; // [ -g, 0, 0 ]
}
if (fabsf(accel_ema[0]) < accel_err_thr &&
fabsf(accel_ema[1] - CONSTANTS_ONE_G) < accel_err_thr &&
fabsf(accel_ema[2]) < accel_err_thr) {
return 2; // [ 0, g, 0 ]
}
if (fabsf(accel_ema[0]) < accel_err_thr &&
fabsf(accel_ema[1] + CONSTANTS_ONE_G) < accel_err_thr &&
fabsf(accel_ema[2]) < accel_err_thr) {
return 3; // [ 0, -g, 0 ]
}
if (fabsf(accel_ema[0]) < accel_err_thr &&
fabsf(accel_ema[1]) < accel_err_thr &&
fabsf(accel_ema[2] - CONSTANTS_ONE_G) < accel_err_thr) {
return 4; // [ 0, 0, g ]
}
if (fabsf(accel_ema[0]) < accel_err_thr &&
fabsf(accel_ema[1]) < accel_err_thr &&
fabsf(accel_ema[2] + CONSTANTS_ONE_G) < accel_err_thr) {
return 5; // [ 0, 0, -g ]
}
mavlink_and_console_log_critical(mavlink_fd, "ERROR: invalid orientation");
return ERROR; // Can't detect orientation
}
static bool accelerometerCheck(int mavlink_fd, unsigned instance, bool optional, bool dynamic)
{
bool success = true;
char s[30];
sprintf(s, "%s%u", ACCEL_BASE_DEVICE_PATH, instance);
int fd = open(s, O_RDONLY);
if (fd < 0) {
if (!optional) {
mavlink_and_console_log_critical(mavlink_fd,
"PREFLIGHT FAIL: NO ACCEL SENSOR #%u", instance);
}
return false;
}
int calibration_devid;
int ret;
int devid = ioctl(fd, DEVIOCGDEVICEID, 0);
sprintf(s, "CAL_ACC%u_ID", instance);
param_get(param_find(s), &(calibration_devid));
if (devid != calibration_devid) {
mavlink_and_console_log_critical(mavlink_fd,
"PREFLIGHT FAIL: ACCEL #%u UNCALIBRATED", instance);
success = false;
goto out;
}
ret = ioctl(fd, ACCELIOCSELFTEST, 0);
if (ret != OK) {
mavlink_and_console_log_critical(mavlink_fd,
"PREFLIGHT FAIL: ACCEL #%u SELFTEST FAILED", instance);
success = false;
goto out;
}
if (dynamic) {
/* check measurement result range */
struct accel_report acc;
ret = read(fd, &acc, sizeof(acc));
if (ret == sizeof(acc)) {
/* evaluate values */
float accel_magnitude = sqrtf(acc.x * acc.x + acc.y * acc.y + acc.z * acc.z);
if (accel_magnitude < 4.0f || accel_magnitude > 15.0f /* m/s^2 */) {
mavlink_and_console_log_critical(mavlink_fd, "PREFLIGHT FAIL: ACCEL RANGE, hold still on arming");
/* this is frickin' fatal */
success = false;
goto out;
}
} else {
mavlink_log_critical(mavlink_fd, "PREFLIGHT FAIL: ACCEL READ");
/* this is frickin' fatal */
success = false;
goto out;
}
}
out:
close(fd);
return success;
}
int do_accel_calibration(int mavlink_fd)
{
int fd;
int32_t device_id[max_sens];
mavlink_and_console_log_info(mavlink_fd, CAL_STARTED_MSG, sensor_name);
mavlink_and_console_log_info(mavlink_fd, "You need to put the system on all six sides");
sleep(3);
mavlink_and_console_log_info(mavlink_fd, "Follow the instructions on the screen");
sleep(5);
struct accel_scale accel_scale = {
0.0f,
1.0f,
0.0f,
1.0f,
0.0f,
1.0f,
};
int res = OK;
char str[30];
/* reset all sensors */
for (unsigned s = 0; s < max_sens; s++) {
sprintf(str, "%s%u", ACCEL_BASE_DEVICE_PATH, s);
/* reset all offsets to zero and all scales to one */
fd = open(str, 0);
if (fd < 0) {
continue;
}
device_id[s] = ioctl(fd, DEVIOCGDEVICEID, 0);
res = ioctl(fd, ACCELIOCSSCALE, (long unsigned int)&accel_scale);
close(fd);
if (res != OK) {
mavlink_and_console_log_critical(mavlink_fd, CAL_FAILED_RESET_CAL_MSG);
}
}
float accel_offs[max_sens][3];
float accel_T[max_sens][3][3];
unsigned active_sensors;
if (res == OK) {
/* measure and calculate offsets & scales */
res = do_accel_calibration_measurements(mavlink_fd, accel_offs, accel_T, &active_sensors);
}
if (res != OK || active_sensors == 0) {
mavlink_and_console_log_critical(mavlink_fd, CAL_FAILED_SENSOR_MSG);
return ERROR;
}
/* measurements completed successfully, rotate calibration values */
param_t board_rotation_h = param_find("SENS_BOARD_ROT");
int32_t board_rotation_int;
param_get(board_rotation_h, &(board_rotation_int));
enum Rotation board_rotation_id = (enum Rotation)board_rotation_int;
math::Matrix<3, 3> board_rotation;
get_rot_matrix(board_rotation_id, &board_rotation);
math::Matrix<3, 3> board_rotation_t = board_rotation.transposed();
for (unsigned i = 0; i < active_sensors; i++) {
/* handle individual sensors, one by one */
math::Vector<3> accel_offs_vec(accel_offs[i]);
math::Vector<3> accel_offs_rotated = board_rotation_t * accel_offs_vec;
math::Matrix<3, 3> accel_T_mat(accel_T[i]);
math::Matrix<3, 3> accel_T_rotated = board_rotation_t * accel_T_mat * board_rotation;
accel_scale.x_offset = accel_offs_rotated(0);
accel_scale.x_scale = accel_T_rotated(0, 0);
accel_scale.y_offset = accel_offs_rotated(1);
accel_scale.y_scale = accel_T_rotated(1, 1);
accel_scale.z_offset = accel_offs_rotated(2);
accel_scale.z_scale = accel_T_rotated(2, 2);
bool failed = false;
/* set parameters */
(void)sprintf(str, "CAL_ACC%u_XOFF", i);
failed |= (OK != param_set(param_find(str), &(accel_scale.x_offset)));
(void)sprintf(str, "CAL_ACC%u_YOFF", i);
failed |= (OK != param_set(param_find(str), &(accel_scale.y_offset)));
(void)sprintf(str, "CAL_ACC%u_ZOFF", i);
failed |= (OK != param_set(param_find(str), &(accel_scale.z_offset)));
(void)sprintf(str, "CAL_ACC%u_XSCALE", i);
failed |= (OK != param_set(param_find(str), &(accel_scale.x_scale)));
(void)sprintf(str, "CAL_ACC%u_YSCALE", i);
failed |= (OK != param_set(param_find(str), &(accel_scale.y_scale)));
(void)sprintf(str, "CAL_ACC%u_ZSCALE", i);
failed |= (OK != param_set(param_find(str), &(accel_scale.z_scale)));
(void)sprintf(str, "CAL_ACC%u_ID", i);
failed |= (OK != param_set(param_find(str), &(device_id[i])));
if (failed) {
mavlink_and_console_log_critical(mavlink_fd, CAL_FAILED_SET_PARAMS_MSG);
return ERROR;
}
sprintf(str, "%s%u", ACCEL_BASE_DEVICE_PATH, i);
fd = open(str, 0);
if (fd < 0) {
mavlink_and_console_log_critical(mavlink_fd, "sensor does not exist");
res = ERROR;
} else {
res = ioctl(fd, ACCELIOCSSCALE, (long unsigned int)&accel_scale);
close(fd);
}
if (res != OK) {
mavlink_and_console_log_critical(mavlink_fd, CAL_FAILED_APPLY_CAL_MSG);
}
}
if (res == OK) {
/* auto-save to EEPROM */
res = param_save_default();
if (res != OK) {
mavlink_and_console_log_critical(mavlink_fd, CAL_FAILED_SAVE_PARAMS_MSG);
}
mavlink_and_console_log_info(mavlink_fd, CAL_DONE_MSG, sensor_name);
} else {
mavlink_and_console_log_critical(mavlink_fd, CAL_FAILED_MSG, sensor_name);
}
return res;
}
int do_mag_calibration(int mavlink_fd)
{
const unsigned max_mags = 3;
int32_t device_id[max_mags];
mavlink_and_console_log_info(mavlink_fd, CAL_STARTED_MSG, sensor_name);
sleep(1);
struct mag_scale mscale_null[max_mags] = {
{
0.0f,
1.0f,
0.0f,
1.0f,
0.0f,
1.0f,
}
} ;
int res = ERROR;
char str[30];
unsigned calibrated_ok = 0;
for (unsigned s = 0; s < max_mags; s++) {
/* erase old calibration */
(void)sprintf(str, "%s%u", MAG_BASE_DEVICE_PATH, s);
int fd = open(str, O_RDONLY);
if (fd < 0) {
continue;
}
mavlink_and_console_log_info(mavlink_fd, "Calibrating magnetometer #%u..", s);
sleep(3);
device_id[s] = ioctl(fd, DEVIOCGDEVICEID, 0);
/* ensure all scale fields are initialized tha same as the first struct */
(void)memcpy(&mscale_null[s], &mscale_null[0], sizeof(mscale_null[0]));
res = ioctl(fd, MAGIOCSSCALE, (long unsigned int)&mscale_null[s]);
if (res != OK) {
mavlink_and_console_log_critical(mavlink_fd, CAL_FAILED_RESET_CAL_MSG);
}
if (res == OK) {
/* calibrate range */
res = ioctl(fd, MAGIOCCALIBRATE, fd);
if (res != OK) {
mavlink_and_console_log_info(mavlink_fd, "Skipped scale calibration");
/* this is non-fatal - mark it accordingly */
res = OK;
}
}
close(fd);
if (res == OK) {
res = calibrate_instance(mavlink_fd, s, device_id[s]);
if (res == OK) {
calibrated_ok++;
}
}
}
if (calibrated_ok) {
mavlink_and_console_log_info(mavlink_fd, CAL_PROGRESS_MSG, sensor_name, 100);
usleep(100000);
mavlink_and_console_log_info(mavlink_fd, CAL_DONE_MSG, sensor_name);
/* auto-save to EEPROM */
res = param_save_default();
if (res != OK) {
mavlink_and_console_log_critical(mavlink_fd, CAL_FAILED_SAVE_PARAMS_MSG);
}
} else {
mavlink_and_console_log_critical(mavlink_fd, CAL_FAILED_MSG, sensor_name);
}
return res;
}
int rc_calibration_check(int mavlink_fd)
{
char nbuf[20];
param_t _parameter_handles_min, _parameter_handles_trim, _parameter_handles_max,
_parameter_handles_rev, _parameter_handles_dz;
unsigned map_fail_count = 0;
const char *rc_map_mandatory[] = { "RC_MAP_MODE_SW",
/* needs discussion if this should be mandatory "RC_MAP_POSCTL_SW"*/
0 /* end marker */
};
unsigned j = 0;
/* first check channel mappings */
while (rc_map_mandatory[j] != 0) {
param_t map_parm = param_find(rc_map_mandatory[j]);
if (map_parm == PARAM_INVALID) {
mavlink_log_critical(mavlink_fd, "RC ERR: PARAM %s MISSING", rc_map_mandatory[j]);
/* give system time to flush error message in case there are more */
usleep(100000);
map_fail_count++;
j++;
continue;
}
int32_t mapping;
param_get(map_parm, &mapping);
if (mapping > RC_INPUT_MAX_CHANNELS) {
mavlink_log_critical(mavlink_fd, "RC ERR: %s >= # CHANS", rc_map_mandatory[j]);
/* give system time to flush error message in case there are more */
usleep(100000);
map_fail_count++;
}
if (mapping == 0) {
mavlink_log_critical(mavlink_fd, "RC ERR: Mandatory %s is unmapped", rc_map_mandatory[j]);
/* give system time to flush error message in case there are more */
usleep(100000);
map_fail_count++;
}
j++;
}
unsigned total_fail_count = 0;
unsigned channels_failed = 0;
for (unsigned i = 0; i < RC_INPUT_MAX_CHANNELS; i++) {
/* should the channel be enabled? */
uint8_t count = 0;
/* initialize values to values failing the check */
float param_min = 0.0f;
float param_max = 0.0f;
float param_trim = 0.0f;
float param_rev = 0.0f;
float param_dz = RC_INPUT_MAX_DEADZONE_US * 2.0f;
/* min values */
sprintf(nbuf, "RC%d_MIN", i + 1);
_parameter_handles_min = param_find(nbuf);
param_get(_parameter_handles_min, ¶m_min);
/* trim values */
sprintf(nbuf, "RC%d_TRIM", i + 1);
_parameter_handles_trim = param_find(nbuf);
param_get(_parameter_handles_trim, ¶m_trim);
/* max values */
sprintf(nbuf, "RC%d_MAX", i + 1);
_parameter_handles_max = param_find(nbuf);
param_get(_parameter_handles_max, ¶m_max);
/* channel reverse */
sprintf(nbuf, "RC%d_REV", i + 1);
_parameter_handles_rev = param_find(nbuf);
param_get(_parameter_handles_rev, ¶m_rev);
/* channel deadzone */
sprintf(nbuf, "RC%d_DZ", i + 1);
_parameter_handles_dz = param_find(nbuf);
param_get(_parameter_handles_dz, ¶m_dz);
/* assert min..center..max ordering */
if (param_min < RC_INPUT_LOWEST_MIN_US) {
count++;
mavlink_log_critical(mavlink_fd, "RC ERR: RC_%d_MIN < %u", i + 1, RC_INPUT_LOWEST_MIN_US);
/* give system time to flush error message in case there are more */
usleep(100000);
}
if (param_max > RC_INPUT_HIGHEST_MAX_US) {
count++;
mavlink_log_critical(mavlink_fd, "RC ERR: RC_%d_MAX > %u", i + 1, RC_INPUT_HIGHEST_MAX_US);
/* give system time to flush error message in case there are more */
usleep(100000);
}
if (param_trim < param_min) {
count++;
mavlink_log_critical(mavlink_fd, "RC ERR: RC_%d_TRIM < MIN (%d/%d)", i + 1, (int)param_trim, (int)param_min);
/* give system time to flush error message in case there are more */
usleep(100000);
}
if (param_trim > param_max) {
count++;
mavlink_log_critical(mavlink_fd, "RC ERR: RC_%d_TRIM > MAX (%d/%d)", i + 1, (int)param_trim, (int)param_max);
/* give system time to flush error message in case there are more */
usleep(100000);
}
/* assert deadzone is sane */
if (param_dz > RC_INPUT_MAX_DEADZONE_US) {
mavlink_log_critical(mavlink_fd, "RC ERR: RC_%d_DZ > %u", i + 1, RC_INPUT_MAX_DEADZONE_US);
/* give system time to flush error message in case there are more */
usleep(100000);
count++;
}
total_fail_count += count;
if (count) {
channels_failed++;
}
}
if (channels_failed) {
sleep(2);
mavlink_and_console_log_critical(mavlink_fd, "%d config error%s for %d RC channel%s.", total_fail_count,
(total_fail_count > 1) ? "s" : "", channels_failed, (channels_failed > 1) ? "s" : "");
usleep(100000);
}
return total_fail_count + map_fail_count;
}
calibrate_return do_accel_calibration_measurements(orb_advert_t *mavlink_log_pub, float (&accel_offs)[max_accel_sens][3], float (&accel_T)[max_accel_sens][3][3], unsigned *active_sensors)
{
calibrate_return result = calibrate_return_ok;
*active_sensors = 0;
accel_worker_data_t worker_data;
worker_data.mavlink_log_pub = mavlink_log_pub;
worker_data.done_count = 0;
bool data_collected[detect_orientation_side_count] = { false, false, false, false, false, false };
// Initialize subs to error condition so we know which ones are open and which are not
for (size_t i=0; i<max_accel_sens; i++) {
worker_data.subs[i] = -1;
}
uint64_t timestamps[max_accel_sens];
// We should not try to subscribe if the topic doesn't actually exist and can be counted.
const unsigned accel_count = orb_group_count(ORB_ID(sensor_accel));
for (unsigned i = 0; i < accel_count; i++) {
worker_data.subs[i] = orb_subscribe_multi(ORB_ID(sensor_accel), i);
if (worker_data.subs[i] < 0) {
result = calibrate_return_error;
break;
}
#ifdef __PX4_QURT
// For QURT respectively the driver framework, we need to get the device ID by copying one report.
struct accel_report accel_report;
orb_copy(ORB_ID(sensor_accel), worker_data.subs[i], &accel_report);
device_id[i] = accel_report.device_id;
#endif
/* store initial timestamp - used to infer which sensors are active */
struct accel_report arp = {};
(void)orb_copy(ORB_ID(sensor_accel), worker_data.subs[i], &arp);
timestamps[i] = arp.timestamp;
if (device_id[i] != 0) {
// Get priority
int32_t prio;
orb_priority(worker_data.subs[i], &prio);
if (prio > device_prio_max) {
device_prio_max = prio;
device_id_primary = device_id[i];
}
} else {
mavlink_and_console_log_critical(mavlink_log_pub, "[cal] Accel #%u no device id, abort", i);
result = calibrate_return_error;
break;
}
}
if (result == calibrate_return_ok) {
int cancel_sub = calibrate_cancel_subscribe();
result = calibrate_from_orientation(mavlink_log_pub, cancel_sub, data_collected, accel_calibration_worker, &worker_data, false /* normal still */);
calibrate_cancel_unsubscribe(cancel_sub);
}
/* close all subscriptions */
for (unsigned i = 0; i < max_accel_sens; i++) {
if (worker_data.subs[i] >= 0) {
/* figure out which sensors were active */
struct accel_report arp = {};
(void)orb_copy(ORB_ID(sensor_accel), worker_data.subs[i], &arp);
if (arp.timestamp != 0 && timestamps[i] != arp.timestamp) {
(*active_sensors)++;
}
px4_close(worker_data.subs[i]);
}
}
if (result == calibrate_return_ok) {
/* calculate offsets and transform matrix */
for (unsigned i = 0; i < (*active_sensors); i++) {
result = calculate_calibration_values(i, worker_data.accel_ref, accel_T, accel_offs, CONSTANTS_ONE_G);
if (result != calibrate_return_ok) {
mavlink_and_console_log_critical(mavlink_log_pub, "[cal] ERROR: calibration calculation error");
break;
}
}
}
return result;
}
int do_level_calibration(orb_advert_t *mavlink_log_pub) {
const unsigned cal_time = 5;
const unsigned cal_hz = 100;
unsigned settle_time = 30;
bool success = false;
int att_sub = orb_subscribe(ORB_ID(vehicle_attitude));
struct vehicle_attitude_s att;
memset(&att, 0, sizeof(att));
mavlink_and_console_log_info(mavlink_log_pub, CAL_QGC_STARTED_MSG, "level");
param_t roll_offset_handle = param_find("SENS_BOARD_X_OFF");
param_t pitch_offset_handle = param_find("SENS_BOARD_Y_OFF");
param_t board_rot_handle = param_find("SENS_BOARD_ROT");
// save old values if calibration fails
float roll_offset_current;
float pitch_offset_current;
int32_t board_rot_current = 0;
param_get(roll_offset_handle, &roll_offset_current);
param_get(pitch_offset_handle, &pitch_offset_current);
param_get(board_rot_handle, &board_rot_current);
// give attitude some time to settle if there have been changes to the board rotation parameters
if (board_rot_current == 0 && fabsf(roll_offset_current) < FLT_EPSILON && fabsf(pitch_offset_current) < FLT_EPSILON ) {
settle_time = 0;
}
float zero = 0.0f;
param_set(roll_offset_handle, &zero);
param_set(pitch_offset_handle, &zero);
px4_pollfd_struct_t fds[1];
fds[0].fd = att_sub;
fds[0].events = POLLIN;
float roll_mean = 0.0f;
float pitch_mean = 0.0f;
unsigned counter = 0;
// sleep for some time
hrt_abstime start = hrt_absolute_time();
while(hrt_elapsed_time(&start) < settle_time * 1000000) {
mavlink_and_console_log_info(mavlink_log_pub, CAL_QGC_PROGRESS_MSG, (int)(90*hrt_elapsed_time(&start)/1e6f/(float)settle_time));
sleep(settle_time / 10);
}
start = hrt_absolute_time();
// average attitude for 5 seconds
while(hrt_elapsed_time(&start) < cal_time * 1000000) {
int pollret = px4_poll(&fds[0], (sizeof(fds) / sizeof(fds[0])), 100);
if (pollret <= 0) {
// attitude estimator is not running
mavlink_and_console_log_critical(mavlink_log_pub, "attitude estimator not running - check system boot");
mavlink_and_console_log_critical(mavlink_log_pub, CAL_QGC_FAILED_MSG, "level");
goto out;
}
orb_copy(ORB_ID(vehicle_attitude), att_sub, &att);
roll_mean += att.roll;
pitch_mean += att.pitch;
counter++;
}
mavlink_and_console_log_info(mavlink_log_pub, CAL_QGC_PROGRESS_MSG, 100);
if (counter > (cal_time * cal_hz / 2 )) {
roll_mean /= counter;
pitch_mean /= counter;
} else {
mavlink_and_console_log_info(mavlink_log_pub, "not enough measurements taken");
success = false;
goto out;
}
if (fabsf(roll_mean) > 0.8f ) {
mavlink_and_console_log_critical(mavlink_log_pub, "excess roll angle");
} else if (fabsf(pitch_mean) > 0.8f ) {
mavlink_and_console_log_critical(mavlink_log_pub, "excess pitch angle");
} else {
roll_mean *= (float)M_RAD_TO_DEG;
pitch_mean *= (float)M_RAD_TO_DEG;
param_set(roll_offset_handle, &roll_mean);
param_set(pitch_offset_handle, &pitch_mean);
success = true;
}
out:
if (success) {
mavlink_and_console_log_info(mavlink_log_pub, CAL_QGC_DONE_MSG, "level");
return 0;
} else {
// set old parameters
param_set(roll_offset_handle, &roll_offset_current);
param_set(pitch_offset_handle, &pitch_offset_current);
mavlink_and_console_log_critical(mavlink_log_pub, CAL_QGC_FAILED_MSG, "level");
return 1;
}
}
calibrate_return calibrate_from_orientation(int mavlink_fd,
int cancel_sub,
bool side_data_collected[detect_orientation_side_count],
calibration_from_orientation_worker_t calibration_worker,
void* worker_data,
bool lenient_still_position)
{
calibrate_return result = calibrate_return_ok;
// Setup subscriptions to onboard accel sensor
int sub_accel = orb_subscribe(ORB_ID(sensor_combined));
if (sub_accel < 0) {
mavlink_and_console_log_critical(mavlink_fd, CAL_QGC_FAILED_MSG, "No onboard accel");
return calibrate_return_error;
}
unsigned orientation_failures = 0;
// Rotate through all requested orientation
while (true) {
if (calibrate_cancel_check(mavlink_fd, cancel_sub)) {
result = calibrate_return_cancelled;
break;
}
if (orientation_failures > 4) {
result = calibrate_return_error;
mavlink_and_console_log_critical(mavlink_fd, CAL_QGC_FAILED_MSG, "timeout: no motion");
break;
}
unsigned int side_complete_count = 0;
// Update the number of completed sides
for (unsigned i = 0; i < detect_orientation_side_count; i++) {
if (side_data_collected[i]) {
side_complete_count++;
}
}
if (side_complete_count == detect_orientation_side_count) {
// We have completed all sides, move on
break;
}
/* inform user which orientations are still needed */
char pendingStr[256];
pendingStr[0] = 0;
for (unsigned int cur_orientation=0; cur_orientation<detect_orientation_side_count; cur_orientation++) {
if (!side_data_collected[cur_orientation]) {
strcat(pendingStr, " ");
strcat(pendingStr, detect_orientation_str((enum detect_orientation_return)cur_orientation));
}
}
mavlink_and_console_log_info(mavlink_fd, "[cal] pending:%s", pendingStr);
mavlink_and_console_log_info(mavlink_fd, "[cal] hold vehicle still on a pending side");
enum detect_orientation_return orient = detect_orientation(mavlink_fd, cancel_sub, sub_accel, lenient_still_position);
if (orient == DETECT_ORIENTATION_ERROR) {
orientation_failures++;
mavlink_and_console_log_info(mavlink_fd, "[cal] detected motion, hold still...");
continue;
}
/* inform user about already handled side */
if (side_data_collected[orient]) {
orientation_failures++;
mavlink_and_console_log_critical(mavlink_fd, "%s side already completed", detect_orientation_str(orient));
mavlink_and_console_log_critical(mavlink_fd, "rotate to a pending side");
continue;
}
mavlink_and_console_log_info(mavlink_fd, CAL_QGC_ORIENTATION_DETECTED_MSG, detect_orientation_str(orient));
orientation_failures = 0;
// Call worker routine
result = calibration_worker(orient, cancel_sub, worker_data);
if (result != calibrate_return_ok ) {
break;
}
mavlink_and_console_log_info(mavlink_fd, CAL_QGC_SIDE_DONE_MSG, detect_orientation_str(orient));
// Note that this side is complete
side_data_collected[orient] = true;
tune_neutral(true);
usleep(200000);
}
if (sub_accel >= 0) {
px4_close(sub_accel);
}
return result;
}
int do_accel_calibration(orb_advert_t *mavlink_log_pub)
{
#ifndef __PX4_QURT
int fd;
#endif
mavlink_and_console_log_info(mavlink_log_pub, CAL_QGC_STARTED_MSG, sensor_name);
struct accel_calibration_s accel_scale;
accel_scale.x_offset = 0.0f;
accel_scale.x_scale = 1.0f;
accel_scale.y_offset = 0.0f;
accel_scale.y_scale = 1.0f;
accel_scale.z_offset = 0.0f;
accel_scale.z_scale = 1.0f;
int res = OK;
char str[30];
/* reset all sensors */
for (unsigned s = 0; s < max_accel_sens; s++) {
#ifndef __PX4_QURT
sprintf(str, "%s%u", ACCEL_BASE_DEVICE_PATH, s);
/* reset all offsets to zero and all scales to one */
fd = px4_open(str, 0);
if (fd < 0) {
continue;
}
device_id[s] = px4_ioctl(fd, DEVIOCGDEVICEID, 0);
res = px4_ioctl(fd, ACCELIOCSSCALE, (long unsigned int)&accel_scale);
px4_close(fd);
if (res != OK) {
mavlink_and_console_log_critical(mavlink_log_pub, CAL_ERROR_RESET_CAL_MSG, s);
}
#else
(void)sprintf(str, "CAL_ACC%u_XOFF", s);
res = param_set(param_find(str), &accel_scale.x_offset);
if (res != OK) {
PX4_ERR("unable to reset %s", str);
}
(void)sprintf(str, "CAL_ACC%u_YOFF", s);
res = param_set(param_find(str), &accel_scale.y_offset);
if (res != OK) {
PX4_ERR("unable to reset %s", str);
}
(void)sprintf(str, "CAL_ACC%u_ZOFF", s);
res = param_set(param_find(str), &accel_scale.z_offset);
if (res != OK) {
PX4_ERR("unable to reset %s", str);
}
(void)sprintf(str, "CAL_ACC%u_XSCALE", s);
res = param_set(param_find(str), &accel_scale.x_scale);
if (res != OK) {
PX4_ERR("unable to reset %s", str);
}
(void)sprintf(str, "CAL_ACC%u_YSCALE", s);
res = param_set(param_find(str), &accel_scale.y_scale);
if (res != OK) {
PX4_ERR("unable to reset %s", str);
}
(void)sprintf(str, "CAL_ACC%u_ZSCALE", s);
res = param_set(param_find(str), &accel_scale.z_scale);
if (res != OK) {
PX4_ERR("unable to reset %s", str);
}
#endif
}
float accel_offs[max_accel_sens][3];
float accel_T[max_accel_sens][3][3];
unsigned active_sensors;
/* measure and calculate offsets & scales */
if (res == OK) {
calibrate_return cal_return = do_accel_calibration_measurements(mavlink_log_pub, accel_offs, accel_T, &active_sensors);
if (cal_return == calibrate_return_cancelled) {
// Cancel message already displayed, nothing left to do
return ERROR;
} else if (cal_return == calibrate_return_ok) {
res = OK;
} else {
res = ERROR;
}
}
if (res != OK) {
if (active_sensors == 0) {
mavlink_and_console_log_critical(mavlink_log_pub, CAL_ERROR_SENSOR_MSG);
}
return ERROR;
}
/* measurements completed successfully, rotate calibration values */
param_t board_rotation_h = param_find("SENS_BOARD_ROT");
int32_t board_rotation_int;
param_get(board_rotation_h, &(board_rotation_int));
enum Rotation board_rotation_id = (enum Rotation)board_rotation_int;
math::Matrix<3, 3> board_rotation;
get_rot_matrix(board_rotation_id, &board_rotation);
math::Matrix<3, 3> board_rotation_t = board_rotation.transposed();
for (unsigned i = 0; i < active_sensors; i++) {
/* handle individual sensors, one by one */
math::Vector<3> accel_offs_vec(accel_offs[i]);
math::Vector<3> accel_offs_rotated = board_rotation_t * accel_offs_vec;
math::Matrix<3, 3> accel_T_mat(accel_T[i]);
math::Matrix<3, 3> accel_T_rotated = board_rotation_t * accel_T_mat * board_rotation;
accel_scale.x_offset = accel_offs_rotated(0);
accel_scale.x_scale = accel_T_rotated(0, 0);
accel_scale.y_offset = accel_offs_rotated(1);
accel_scale.y_scale = accel_T_rotated(1, 1);
accel_scale.z_offset = accel_offs_rotated(2);
accel_scale.z_scale = accel_T_rotated(2, 2);
bool failed = false;
failed = failed || (OK != param_set_no_notification(param_find("CAL_ACC_PRIME"), &(device_id_primary)));
PX4_DEBUG("found offset %d: x: %.6f, y: %.6f, z: %.6f", i,
(double)accel_scale.x_offset,
(double)accel_scale.y_offset,
(double)accel_scale.z_offset);
PX4_DEBUG("found scale %d: x: %.6f, y: %.6f, z: %.6f", i,
(double)accel_scale.x_scale,
(double)accel_scale.y_scale,
(double)accel_scale.z_scale);
/* set parameters */
(void)sprintf(str, "CAL_ACC%u_XOFF", i);
failed |= (OK != param_set_no_notification(param_find(str), &(accel_scale.x_offset)));
(void)sprintf(str, "CAL_ACC%u_YOFF", i);
failed |= (OK != param_set_no_notification(param_find(str), &(accel_scale.y_offset)));
(void)sprintf(str, "CAL_ACC%u_ZOFF", i);
failed |= (OK != param_set_no_notification(param_find(str), &(accel_scale.z_offset)));
(void)sprintf(str, "CAL_ACC%u_XSCALE", i);
failed |= (OK != param_set_no_notification(param_find(str), &(accel_scale.x_scale)));
(void)sprintf(str, "CAL_ACC%u_YSCALE", i);
failed |= (OK != param_set_no_notification(param_find(str), &(accel_scale.y_scale)));
(void)sprintf(str, "CAL_ACC%u_ZSCALE", i);
failed |= (OK != param_set_no_notification(param_find(str), &(accel_scale.z_scale)));
(void)sprintf(str, "CAL_ACC%u_ID", i);
failed |= (OK != param_set_no_notification(param_find(str), &(device_id[i])));
if (failed) {
mavlink_and_console_log_critical(mavlink_log_pub, CAL_ERROR_SET_PARAMS_MSG, i);
return ERROR;
}
#ifndef __PX4_QURT
sprintf(str, "%s%u", ACCEL_BASE_DEVICE_PATH, i);
fd = px4_open(str, 0);
if (fd < 0) {
mavlink_and_console_log_critical(mavlink_log_pub, CAL_QGC_FAILED_MSG, "sensor does not exist");
res = ERROR;
} else {
res = px4_ioctl(fd, ACCELIOCSSCALE, (long unsigned int)&accel_scale);
px4_close(fd);
}
if (res != OK) {
mavlink_and_console_log_critical(mavlink_log_pub, CAL_ERROR_APPLY_CAL_MSG, i);
}
#endif
}
if (res == OK) {
/* auto-save to EEPROM */
res = param_save_default();
if (res != OK) {
mavlink_and_console_log_critical(mavlink_log_pub, CAL_ERROR_SAVE_PARAMS_MSG);
}
/* if there is a any preflight-check system response, let the barrage of messages through */
usleep(200000);
mavlink_and_console_log_info(mavlink_log_pub, CAL_QGC_DONE_MSG, sensor_name);
} else {
mavlink_and_console_log_critical(mavlink_log_pub, CAL_QGC_FAILED_MSG, sensor_name);
}
/* give this message enough time to propagate */
usleep(600000);
return res;
}
calibrate_return mag_calibrate_all(int mavlink_fd, int32_t (&device_ids)[max_mags])
{
calibrate_return result = calibrate_return_ok;
mag_worker_data_t worker_data;
worker_data.mavlink_fd = mavlink_fd;
worker_data.done_count = 0;
worker_data.calibration_points_perside = 40;
worker_data.calibration_interval_perside_seconds = 20;
worker_data.calibration_interval_perside_useconds = worker_data.calibration_interval_perside_seconds * 1000 * 1000;
// Collect: Right-side up, Left Side, Nose down
worker_data.side_data_collected[DETECT_ORIENTATION_RIGHTSIDE_UP] = false;
worker_data.side_data_collected[DETECT_ORIENTATION_LEFT] = false;
worker_data.side_data_collected[DETECT_ORIENTATION_NOSE_DOWN] = false;
worker_data.side_data_collected[DETECT_ORIENTATION_TAIL_DOWN] = false;
worker_data.side_data_collected[DETECT_ORIENTATION_UPSIDE_DOWN] = false;
worker_data.side_data_collected[DETECT_ORIENTATION_RIGHT] = false;
for (size_t cur_mag=0; cur_mag<max_mags; cur_mag++) {
// Initialize to no subscription
worker_data.sub_mag[cur_mag] = -1;
// Initialize to no memory allocated
worker_data.x[cur_mag] = NULL;
worker_data.y[cur_mag] = NULL;
worker_data.z[cur_mag] = NULL;
worker_data.calibration_counter_total[cur_mag] = 0;
}
const unsigned int calibration_points_maxcount = calibration_sides * worker_data.calibration_points_perside;
char str[30];
for (size_t cur_mag=0; cur_mag<max_mags; cur_mag++) {
worker_data.x[cur_mag] = reinterpret_cast<float *>(malloc(sizeof(float) * calibration_points_maxcount));
worker_data.y[cur_mag] = reinterpret_cast<float *>(malloc(sizeof(float) * calibration_points_maxcount));
worker_data.z[cur_mag] = reinterpret_cast<float *>(malloc(sizeof(float) * calibration_points_maxcount));
if (worker_data.x[cur_mag] == NULL || worker_data.y[cur_mag] == NULL || worker_data.z[cur_mag] == NULL) {
mavlink_and_console_log_critical(mavlink_fd, "[cal] ERROR: out of memory");
result = calibrate_return_error;
}
}
// Setup subscriptions to mag sensors
if (result == calibrate_return_ok) {
for (unsigned cur_mag=0; cur_mag<max_mags; cur_mag++) {
if (device_ids[cur_mag] != 0) {
// Mag in this slot is available
worker_data.sub_mag[cur_mag] = orb_subscribe_multi(ORB_ID(sensor_mag), cur_mag);
if (worker_data.sub_mag[cur_mag] < 0) {
mavlink_and_console_log_critical(mavlink_fd, "[cal] Mag #%u not found, abort", cur_mag);
result = calibrate_return_error;
break;
}
}
}
}
// Limit update rate to get equally spaced measurements over time (in ms)
if (result == calibrate_return_ok) {
for (unsigned cur_mag=0; cur_mag<max_mags; cur_mag++) {
if (device_ids[cur_mag] != 0) {
// Mag in this slot is available
unsigned int orb_interval_msecs = (worker_data.calibration_interval_perside_useconds / 1000) / worker_data.calibration_points_perside;
//mavlink_and_console_log_info(mavlink_fd, "Orb interval %u msecs", orb_interval_msecs);
orb_set_interval(worker_data.sub_mag[cur_mag], orb_interval_msecs);
}
}
}
if (result == calibrate_return_ok) {
int cancel_sub = calibrate_cancel_subscribe();
result = calibrate_from_orientation(mavlink_fd, // Mavlink fd to write output
cancel_sub, // Subscription to vehicle_command for cancel support
worker_data.side_data_collected, // Sides to calibrate
mag_calibration_worker, // Calibration worker
&worker_data, // Opaque data for calibration worked
true); // true: lenient still detection
calibrate_cancel_unsubscribe(cancel_sub);
}
// Close subscriptions
for (unsigned cur_mag=0; cur_mag<max_mags; cur_mag++) {
if (worker_data.sub_mag[cur_mag] >= 0) {
px4_close(worker_data.sub_mag[cur_mag]);
}
}
// Calculate calibration values for each mag
float sphere_x[max_mags];
float sphere_y[max_mags];
float sphere_z[max_mags];
float sphere_radius[max_mags];
// Sphere fit the data to get calibration values
if (result == calibrate_return_ok) {
for (unsigned cur_mag=0; cur_mag<max_mags; cur_mag++) {
if (device_ids[cur_mag] != 0) {
// Mag in this slot is available and we should have values for it to calibrate
sphere_fit_least_squares(worker_data.x[cur_mag], worker_data.y[cur_mag], worker_data.z[cur_mag],
worker_data.calibration_counter_total[cur_mag],
100, 0.0f,
&sphere_x[cur_mag], &sphere_y[cur_mag], &sphere_z[cur_mag],
&sphere_radius[cur_mag]);
if (!PX4_ISFINITE(sphere_x[cur_mag]) || !PX4_ISFINITE(sphere_y[cur_mag]) || !PX4_ISFINITE(sphere_z[cur_mag])) {
mavlink_and_console_log_critical(mavlink_fd, "[cal] ERROR: NaN in sphere fit for mag #%u", cur_mag);
result = calibrate_return_error;
}
}
}
}
// Print uncalibrated data points
if (result == calibrate_return_ok) {
printf("RAW DATA:\n--------------------\n");
for (size_t cur_mag = 0; cur_mag < max_mags; cur_mag++) {
printf("RAW: MAG %u with %u samples:\n", (unsigned)cur_mag, (unsigned)worker_data.calibration_counter_total[cur_mag]);
for (size_t i = 0; i < worker_data.calibration_counter_total[cur_mag]; i++) {
float x = worker_data.x[cur_mag][i];
float y = worker_data.y[cur_mag][i];
float z = worker_data.z[cur_mag][i];
printf("%8.4f, %8.4f, %8.4f\n", (double)x, (double)y, (double)z);
}
printf(">>>>>>>\n");
}
printf("CALIBRATED DATA:\n--------------------\n");
for (size_t cur_mag = 0; cur_mag < max_mags; cur_mag++) {
printf("Calibrated: MAG %u with %u samples:\n", (unsigned)cur_mag, (unsigned)worker_data.calibration_counter_total[cur_mag]);
for (size_t i = 0; i < worker_data.calibration_counter_total[cur_mag]; i++) {
float x = worker_data.x[cur_mag][i] - sphere_x[cur_mag];
float y = worker_data.y[cur_mag][i] - sphere_y[cur_mag];
float z = worker_data.z[cur_mag][i] - sphere_z[cur_mag];
printf("%8.4f, %8.4f, %8.4f\n", (double)x, (double)y, (double)z);
}
printf("SPHERE RADIUS: %8.4f\n", (double)sphere_radius[cur_mag]);
printf(">>>>>>>\n");
}
}
// Data points are no longer needed
for (size_t cur_mag=0; cur_mag<max_mags; cur_mag++) {
free(worker_data.x[cur_mag]);
free(worker_data.y[cur_mag]);
free(worker_data.z[cur_mag]);
}
if (result == calibrate_return_ok) {
for (unsigned cur_mag=0; cur_mag<max_mags; cur_mag++) {
if (device_ids[cur_mag] != 0) {
int fd_mag = -1;
struct mag_scale mscale;
// Set new scale
(void)sprintf(str, "%s%u", MAG_BASE_DEVICE_PATH, cur_mag);
fd_mag = px4_open(str, 0);
if (fd_mag < 0) {
mavlink_and_console_log_critical(mavlink_fd, "[cal] ERROR: unable to open mag device #%u", cur_mag);
result = calibrate_return_error;
}
if (result == calibrate_return_ok) {
if (px4_ioctl(fd_mag, MAGIOCGSCALE, (long unsigned int)&mscale) != OK) {
mavlink_and_console_log_critical(mavlink_fd, "[cal] ERROR: failed to get current calibration #%u", cur_mag);
result = calibrate_return_error;
}
}
if (result == calibrate_return_ok) {
mscale.x_offset = sphere_x[cur_mag];
mscale.y_offset = sphere_y[cur_mag];
mscale.z_offset = sphere_z[cur_mag];
if (px4_ioctl(fd_mag, MAGIOCSSCALE, (long unsigned int)&mscale) != OK) {
mavlink_and_console_log_critical(mavlink_fd, CAL_ERROR_APPLY_CAL_MSG, cur_mag);
result = calibrate_return_error;
}
}
// Mag device no longer needed
if (fd_mag >= 0) {
px4_close(fd_mag);
}
if (result == calibrate_return_ok) {
bool failed = false;
/* set parameters */
(void)sprintf(str, "CAL_MAG%u_ID", cur_mag);
failed |= (OK != param_set_no_notification(param_find(str), &(device_ids[cur_mag])));
(void)sprintf(str, "CAL_MAG%u_XOFF", cur_mag);
failed |= (OK != param_set_no_notification(param_find(str), &(mscale.x_offset)));
(void)sprintf(str, "CAL_MAG%u_YOFF", cur_mag);
failed |= (OK != param_set_no_notification(param_find(str), &(mscale.y_offset)));
(void)sprintf(str, "CAL_MAG%u_ZOFF", cur_mag);
failed |= (OK != param_set_no_notification(param_find(str), &(mscale.z_offset)));
(void)sprintf(str, "CAL_MAG%u_XSCALE", cur_mag);
failed |= (OK != param_set_no_notification(param_find(str), &(mscale.x_scale)));
(void)sprintf(str, "CAL_MAG%u_YSCALE", cur_mag);
failed |= (OK != param_set_no_notification(param_find(str), &(mscale.y_scale)));
(void)sprintf(str, "CAL_MAG%u_ZSCALE", cur_mag);
failed |= (OK != param_set_no_notification(param_find(str), &(mscale.z_scale)));
if (failed) {
mavlink_and_console_log_critical(mavlink_fd, CAL_ERROR_SET_PARAMS_MSG, cur_mag);
result = calibrate_return_error;
} else {
mavlink_and_console_log_info(mavlink_fd, "[cal] mag #%u off: x:%.2f y:%.2f z:%.2f Ga",
cur_mag,
(double)mscale.x_offset, (double)mscale.y_offset, (double)mscale.z_offset);
mavlink_and_console_log_info(mavlink_fd, "[cal] mag #%u scale: x:%.2f y:%.2f z:%.2f",
cur_mag,
(double)mscale.x_scale, (double)mscale.y_scale, (double)mscale.z_scale);
}
}
}
}
}
return result;
}
transition_result_t
arming_state_transition(struct vehicle_status_s *status, ///< current vehicle status
const struct safety_s *safety, ///< current safety settings
arming_state_t new_arming_state, ///< arming state requested
struct actuator_armed_s *armed, ///< current armed status
bool fRunPreArmChecks, ///< true: run the pre-arm checks, false: no pre-arm checks, for unit testing
const int mavlink_fd) ///< mavlink fd for error reporting, 0 for none
{
// Double check that our static arrays are still valid
ASSERT(vehicle_status_s::ARMING_STATE_INIT == 0);
ASSERT(vehicle_status_s::ARMING_STATE_IN_AIR_RESTORE == vehicle_status_s::ARMING_STATE_MAX - 1);
transition_result_t ret = TRANSITION_DENIED;
arming_state_t current_arming_state = status->arming_state;
bool feedback_provided = false;
/* only check transition if the new state is actually different from the current one */
if (new_arming_state == current_arming_state) {
ret = TRANSITION_NOT_CHANGED;
} else {
/*
* Get sensing state if necessary
*/
int prearm_ret = OK;
/* only perform the check if we have to */
if (fRunPreArmChecks && new_arming_state == vehicle_status_s::ARMING_STATE_ARMED
&& status->hil_state == vehicle_status_s::HIL_STATE_OFF) {
prearm_ret = prearm_check(status, mavlink_fd);
}
/*
* Perform an atomic state update
*/
#ifdef __PX4_NUTTX
irqstate_t flags = irqsave();
#endif
/* enforce lockdown in HIL */
if (status->hil_state == vehicle_status_s::HIL_STATE_ON) {
armed->lockdown = true;
prearm_ret = OK;
status->condition_system_sensors_initialized = true;
/* recover from a prearm fail */
if (status->arming_state == vehicle_status_s::ARMING_STATE_STANDBY_ERROR) {
status->arming_state = vehicle_status_s::ARMING_STATE_STANDBY;
}
} else {
armed->lockdown = false;
}
// Check that we have a valid state transition
bool valid_transition = arming_transitions[new_arming_state][status->arming_state];
if (valid_transition) {
// We have a good transition. Now perform any secondary validation.
if (new_arming_state == vehicle_status_s::ARMING_STATE_ARMED) {
// Do not perform pre-arm checks if coming from in air restore
// Allow if vehicle_status_s::HIL_STATE_ON
if (status->arming_state != vehicle_status_s::ARMING_STATE_IN_AIR_RESTORE &&
status->hil_state == vehicle_status_s::HIL_STATE_OFF) {
// Fail transition if pre-arm check fails
if (prearm_ret) {
/* the prearm check already prints the reject reason */
feedback_provided = true;
valid_transition = false;
// Fail transition if we need safety switch press
} else if (safety->safety_switch_available && !safety->safety_off) {
mavlink_log_critical(mavlink_fd, "NOT ARMING: Press safety switch first!");
feedback_provided = true;
valid_transition = false;
}
// Perform power checks only if circuit breaker is not
// engaged for these checks
if (!status->circuit_breaker_engaged_power_check) {
// Fail transition if power is not good
if (!status->condition_power_input_valid) {
mavlink_and_console_log_critical(mavlink_fd, "NOT ARMING: Connect power module.");
feedback_provided = true;
valid_transition = false;
}
// Fail transition if power levels on the avionics rail
// are measured but are insufficient
if (status->condition_power_input_valid && (status->avionics_power_rail_voltage > 0.0f)) {
// Check avionics rail voltages
if (status->avionics_power_rail_voltage < 4.75f) {
mavlink_and_console_log_critical(mavlink_fd, "NOT ARMING: Avionics power low: %6.2f Volt", (double)status->avionics_power_rail_voltage);
feedback_provided = true;
valid_transition = false;
} else if (status->avionics_power_rail_voltage < 4.9f) {
mavlink_log_critical(mavlink_fd, "CAUTION: Avionics power low: %6.2f Volt", (double)status->avionics_power_rail_voltage);
feedback_provided = true;
} else if (status->avionics_power_rail_voltage > 5.4f) {
mavlink_log_critical(mavlink_fd, "CAUTION: Avionics power high: %6.2f Volt", (double)status->avionics_power_rail_voltage);
feedback_provided = true;
}
}
}
}
} else if (new_arming_state == vehicle_status_s::ARMING_STATE_STANDBY && status->arming_state == vehicle_status_s::ARMING_STATE_ARMED_ERROR) {
new_arming_state = vehicle_status_s::ARMING_STATE_STANDBY_ERROR;
}
}
// HIL can always go to standby
if (status->hil_state == vehicle_status_s::HIL_STATE_ON && new_arming_state == vehicle_status_s::ARMING_STATE_STANDBY) {
valid_transition = true;
}
// Check if we are trying to arm, checks look good but we are in STANDBY_ERROR
if (status->arming_state == vehicle_status_s::ARMING_STATE_STANDBY_ERROR) {
if (new_arming_state == vehicle_status_s::ARMING_STATE_ARMED) {
if (status->condition_system_sensors_initialized) {
mavlink_and_console_log_critical(mavlink_fd, "Preflight check resolved, reboot before arming");
} else {
mavlink_and_console_log_critical(mavlink_fd, "Preflight check failed, refusing to arm");
}
feedback_provided = true;
} else if ((new_arming_state == vehicle_status_s::ARMING_STATE_STANDBY) &&
status->condition_system_sensors_initialized) {
mavlink_and_console_log_critical(mavlink_fd, "Preflight check resolved, reboot to complete");
feedback_provided = true;
} else {
// Silent ignore
feedback_provided = true;
}
// Sensors need to be initialized for STANDBY state, except for HIL
} else if ((status->hil_state != vehicle_status_s::HIL_STATE_ON) &&
(new_arming_state == vehicle_status_s::ARMING_STATE_STANDBY) &&
(status->arming_state != vehicle_status_s::ARMING_STATE_STANDBY_ERROR) &&
(!status->condition_system_sensors_initialized)) {
if (!fRunPreArmChecks) {
mavlink_and_console_log_critical(mavlink_fd, "Not ready to fly: Sensors need inspection");
}
feedback_provided = true;
valid_transition = false;
status->arming_state = vehicle_status_s::ARMING_STATE_STANDBY_ERROR;
}
// Finish up the state transition
if (valid_transition) {
armed->armed = new_arming_state == vehicle_status_s::ARMING_STATE_ARMED || new_arming_state == vehicle_status_s::ARMING_STATE_ARMED_ERROR;
armed->ready_to_arm = new_arming_state == vehicle_status_s::ARMING_STATE_ARMED || new_arming_state == vehicle_status_s::ARMING_STATE_STANDBY;
ret = TRANSITION_CHANGED;
status->arming_state = new_arming_state;
}
/* end of atomic state update */
#ifdef __PX4_NUTTX
irqrestore(flags);
#endif
}
if (ret == TRANSITION_DENIED) {
#define WARNSTR "INVAL: %s - %s"
/* only print to console here by default as this is too technical to be useful during operation */
warnx(WARNSTR, state_names[status->arming_state], state_names[new_arming_state]);
/* print to MAVLink if we didn't provide any feedback yet */
if (!feedback_provided) {
mavlink_log_critical(mavlink_fd, WARNSTR, state_names[status->arming_state], state_names[new_arming_state]);
}
#undef WARNSTR
}
return ret;
}
static bool accelerometerCheck(orb_advert_t *mavlink_log_pub, unsigned instance, bool optional, bool dynamic, int &device_id, bool report_fail)
{
bool success = true;
char s[30];
sprintf(s, "%s%u", ACCEL_BASE_DEVICE_PATH, instance);
DevHandle h;
DevMgr::getHandle(s, h);
if (!h.isValid()) {
if (!optional) {
if (report_fail) {
mavlink_and_console_log_critical(mavlink_log_pub, "PREFLIGHT FAIL: NO ACCEL SENSOR #%u", instance);
}
}
return false;
}
int ret = check_calibration(h, "CAL_ACC%u_ID", device_id);
if (ret) {
if (report_fail) {
mavlink_and_console_log_critical(mavlink_log_pub, "PREFLIGHT FAIL: ACCEL #%u UNCALIBRATED", instance);
}
success = false;
goto out;
}
ret = h.ioctl(ACCELIOCSELFTEST, 0);
if (ret != OK) {
if (report_fail) {
mavlink_and_console_log_critical(mavlink_log_pub, "PREFLIGHT FAIL: ACCEL #%u TEST FAILED: %d", instance, ret);
}
success = false;
goto out;
}
#ifdef __PX4_NUTTX
if (dynamic) {
/* check measurement result range */
struct accel_report acc;
ret = h.read(&acc, sizeof(acc));
if (ret == sizeof(acc)) {
/* evaluate values */
float accel_magnitude = sqrtf(acc.x * acc.x + acc.y * acc.y + acc.z * acc.z);
if (accel_magnitude < 4.0f || accel_magnitude > 15.0f /* m/s^2 */) {
if (report_fail) {
mavlink_and_console_log_critical(mavlink_log_pub, "PREFLIGHT FAIL: ACCEL RANGE, hold still on arming");
}
/* this is frickin' fatal */
success = false;
goto out;
}
} else {
if (report_fail) {
mavlink_and_console_log_critical(mavlink_log_pub, "PREFLIGHT FAIL: ACCEL READ");
}
/* this is frickin' fatal */
success = false;
goto out;
}
}
#endif
out:
DevMgr::releaseHandle(h);
return success;
}
bool
Mission::read_mission_item(bool onboard, bool is_current, struct mission_item_s *mission_item)
{
/* select onboard/offboard mission */
int *mission_index_ptr;
dm_item_t dm_item;
struct mission_s *mission = (onboard) ? &_onboard_mission : &_offboard_mission;
int mission_index_next = (onboard) ? _current_onboard_mission_index : _current_offboard_mission_index;
/* do not work on empty missions */
if (mission->count == 0) {
return false;
}
/* move to next item if there is one */
if (mission_index_next < ((int)mission->count - 1)) {
mission_index_next++;
}
if (onboard) {
/* onboard mission */
mission_index_ptr = is_current ? &_current_onboard_mission_index : &mission_index_next;
dm_item = DM_KEY_WAYPOINTS_ONBOARD;
} else {
/* offboard mission */
mission_index_ptr = is_current ? &_current_offboard_mission_index : &mission_index_next;
dm_item = DM_KEY_WAYPOINTS_OFFBOARD(_offboard_mission.dataman_id);
}
/* Repeat this several times in case there are several DO JUMPS that we need to follow along, however, after
* 10 iterations we have to assume that the DO JUMPS are probably cycling and give up. */
for (int i = 0; i < 10; i++) {
if (*mission_index_ptr < 0 || *mission_index_ptr >= (int)mission->count) {
/* mission item index out of bounds - if they are equal, we just reached the end */
if (*mission_index_ptr != (int)mission->count) {
mavlink_and_console_log_critical(_navigator->get_mavlink_fd(), "[wpm] err: index: %d, max: %d", *mission_index_ptr, (int)mission->count);
}
return false;
}
const ssize_t len = sizeof(struct mission_item_s);
/* read mission item to temp storage first to not overwrite current mission item if data damaged */
struct mission_item_s mission_item_tmp;
/* read mission item from datamanager */
if (dm_read(dm_item, *mission_index_ptr, &mission_item_tmp, len) != len) {
/* not supposed to happen unless the datamanager can't access the SD card, etc. */
mavlink_and_console_log_critical(_navigator->get_mavlink_fd(),
"ERROR waypoint could not be read");
return false;
}
/* check for DO_JUMP item, and whether it hasn't not already been repeated enough times */
if (mission_item_tmp.nav_cmd == NAV_CMD_DO_JUMP) {
/* do DO_JUMP as many times as requested */
if (mission_item_tmp.do_jump_current_count < mission_item_tmp.do_jump_repeat_count) {
/* only raise the repeat count if this is for the current mission item
* but not for the next mission item */
if (is_current) {
(mission_item_tmp.do_jump_current_count)++;
/* save repeat count */
if (dm_write(dm_item, *mission_index_ptr, DM_PERSIST_POWER_ON_RESET,
&mission_item_tmp, len) != len) {
/* not supposed to happen unless the datamanager can't access the
* dataman */
mavlink_log_critical(_navigator->get_mavlink_fd(),
"ERROR DO JUMP waypoint could not be written");
return false;
}
report_do_jump_mission_changed(*mission_index_ptr,
mission_item_tmp.do_jump_repeat_count);
}
/* set new mission item index and repeat
* we don't have to validate here, if it's invalid, we should realize this later .*/
*mission_index_ptr = mission_item_tmp.do_jump_mission_index;
} else {
if (is_current) {
mavlink_log_critical(_navigator->get_mavlink_fd(),
"DO JUMP repetitions completed");
}
/* no more DO_JUMPS, therefore just try to continue with next mission item */
(*mission_index_ptr)++;
}
} else {
/* if it's not a DO_JUMP, then we were successful */
memcpy(mission_item, &mission_item_tmp, sizeof(struct mission_item_s));
return true;
}
}
/* we have given up, we don't want to cycle forever */
mavlink_log_critical(_navigator->get_mavlink_fd(),
"ERROR DO JUMP is cycling, giving up");
return false;
}
enum detect_orientation_return detect_orientation(int mavlink_fd, int cancel_sub, int accel_sub, bool lenient_still_position)
{
const unsigned ndim = 3;
struct sensor_combined_s sensor;
float accel_ema[ndim] = { 0.0f }; // exponential moving average of accel
float accel_disp[3] = { 0.0f, 0.0f, 0.0f }; // max-hold dispersion of accel
float ema_len = 0.5f; // EMA time constant in seconds
const float normal_still_thr = 0.25; // normal still threshold
float still_thr2 = powf(lenient_still_position ? (normal_still_thr * 3) : normal_still_thr, 2);
float accel_err_thr = 5.0f; // set accel error threshold to 5m/s^2
hrt_abstime still_time = lenient_still_position ? 500000 : 1300000; // still time required in us
px4_pollfd_struct_t fds[1];
fds[0].fd = accel_sub;
fds[0].events = POLLIN;
hrt_abstime t_start = hrt_absolute_time();
/* set timeout to 30s */
hrt_abstime timeout = 30000000;
hrt_abstime t_timeout = t_start + timeout;
hrt_abstime t = t_start;
hrt_abstime t_prev = t_start;
hrt_abstime t_still = 0;
unsigned poll_errcount = 0;
while (true) {
/* wait blocking for new data */
int poll_ret = px4_poll(fds, 1, 1000);
if (poll_ret) {
orb_copy(ORB_ID(sensor_combined), accel_sub, &sensor);
t = hrt_absolute_time();
float dt = (t - t_prev) / 1000000.0f;
t_prev = t;
float w = dt / ema_len;
for (unsigned i = 0; i < ndim; i++) {
float di = 0.0f;
switch (i) {
case 0:
di = sensor.accelerometer_m_s2[0];
break;
case 1:
di = sensor.accelerometer_m_s2[1];
break;
case 2:
di = sensor.accelerometer_m_s2[2];
break;
}
float d = di - accel_ema[i];
accel_ema[i] += d * w;
d = d * d;
accel_disp[i] = accel_disp[i] * (1.0f - w);
if (d > still_thr2 * 8.0f) {
d = still_thr2 * 8.0f;
}
if (d > accel_disp[i]) {
accel_disp[i] = d;
}
}
/* still detector with hysteresis */
if (accel_disp[0] < still_thr2 &&
accel_disp[1] < still_thr2 &&
accel_disp[2] < still_thr2) {
/* is still now */
if (t_still == 0) {
/* first time */
mavlink_and_console_log_info(mavlink_fd, "[cal] detected rest position, hold still...");
t_still = t;
t_timeout = t + timeout;
} else {
/* still since t_still */
if (t > t_still + still_time) {
/* vehicle is still, exit from the loop to detection of its orientation */
break;
}
}
} else if (accel_disp[0] > still_thr2 * 4.0f ||
accel_disp[1] > still_thr2 * 4.0f ||
accel_disp[2] > still_thr2 * 4.0f) {
/* not still, reset still start time */
if (t_still != 0) {
mavlink_and_console_log_info(mavlink_fd, "[cal] detected motion, hold still...");
usleep(200000);
t_still = 0;
}
}
} else if (poll_ret == 0) {
poll_errcount++;
}
if (t > t_timeout) {
poll_errcount++;
}
if (poll_errcount > 1000) {
mavlink_and_console_log_critical(mavlink_fd, CAL_ERROR_SENSOR_MSG);
return DETECT_ORIENTATION_ERROR;
}
}
if (fabsf(accel_ema[0] - CONSTANTS_ONE_G) < accel_err_thr &&
fabsf(accel_ema[1]) < accel_err_thr &&
fabsf(accel_ema[2]) < accel_err_thr) {
return DETECT_ORIENTATION_TAIL_DOWN; // [ g, 0, 0 ]
}
if (fabsf(accel_ema[0] + CONSTANTS_ONE_G) < accel_err_thr &&
fabsf(accel_ema[1]) < accel_err_thr &&
fabsf(accel_ema[2]) < accel_err_thr) {
return DETECT_ORIENTATION_NOSE_DOWN; // [ -g, 0, 0 ]
}
if (fabsf(accel_ema[0]) < accel_err_thr &&
fabsf(accel_ema[1] - CONSTANTS_ONE_G) < accel_err_thr &&
fabsf(accel_ema[2]) < accel_err_thr) {
return DETECT_ORIENTATION_LEFT; // [ 0, g, 0 ]
}
if (fabsf(accel_ema[0]) < accel_err_thr &&
fabsf(accel_ema[1] + CONSTANTS_ONE_G) < accel_err_thr &&
fabsf(accel_ema[2]) < accel_err_thr) {
return DETECT_ORIENTATION_RIGHT; // [ 0, -g, 0 ]
}
if (fabsf(accel_ema[0]) < accel_err_thr &&
fabsf(accel_ema[1]) < accel_err_thr &&
fabsf(accel_ema[2] - CONSTANTS_ONE_G) < accel_err_thr) {
return DETECT_ORIENTATION_UPSIDE_DOWN; // [ 0, 0, g ]
}
if (fabsf(accel_ema[0]) < accel_err_thr &&
fabsf(accel_ema[1]) < accel_err_thr &&
fabsf(accel_ema[2] + CONSTANTS_ONE_G) < accel_err_thr) {
return DETECT_ORIENTATION_RIGHTSIDE_UP; // [ 0, 0, -g ]
}
mavlink_and_console_log_critical(mavlink_fd, "[cal] ERROR: invalid orientation");
return DETECT_ORIENTATION_ERROR; // Can't detect orientation
}
static calibrate_return mag_calibration_worker(detect_orientation_return orientation, int cancel_sub, void* data)
{
calibrate_return result = calibrate_return_ok;
unsigned int calibration_counter_side;
mag_worker_data_t* worker_data = (mag_worker_data_t*)(data);
mavlink_and_console_log_info(worker_data->mavlink_fd, "[cal] Rotate vehicle around the detected orientation");
mavlink_and_console_log_info(worker_data->mavlink_fd, "[cal] Continue rotation for %u seconds", worker_data->calibration_interval_perside_seconds);
/*
* Detect if the system is rotating.
*
* We're detecting this as a general rotation on any axis, not necessary on the one we
* asked the user for. This is because we really just need two roughly orthogonal axes
* for a good result, so we're not constraining the user more than we have to.
*/
hrt_abstime detection_deadline = hrt_absolute_time() + worker_data->calibration_interval_perside_useconds;
hrt_abstime last_gyro = 0;
float gyro_x_integral = 0.0f;
float gyro_y_integral = 0.0f;
float gyro_z_integral = 0.0f;
const float gyro_int_thresh_rad = 0.5f;
int sub_gyro = orb_subscribe(ORB_ID(sensor_gyro));
while (fabsf(gyro_x_integral) < gyro_int_thresh_rad &&
fabsf(gyro_y_integral) < gyro_int_thresh_rad &&
fabsf(gyro_z_integral) < gyro_int_thresh_rad) {
/* abort on request */
if (calibrate_cancel_check(worker_data->mavlink_fd, cancel_sub)) {
result = calibrate_return_cancelled;
close(sub_gyro);
return result;
}
/* abort with timeout */
if (hrt_absolute_time() > detection_deadline) {
result = calibrate_return_error;
warnx("int: %8.4f, %8.4f, %8.4f", (double)gyro_x_integral, (double)gyro_y_integral, (double)gyro_z_integral);
mavlink_and_console_log_critical(worker_data->mavlink_fd, "Failed: This calibration requires rotation.");
break;
}
/* Wait clocking for new data on all gyro */
struct pollfd fds[1];
fds[0].fd = sub_gyro;
fds[0].events = POLLIN;
size_t fd_count = 1;
int poll_ret = poll(fds, fd_count, 1000);
if (poll_ret > 0) {
struct gyro_report gyro;
orb_copy(ORB_ID(sensor_gyro), sub_gyro, &gyro);
/* ensure we have a valid first timestamp */
if (last_gyro > 0) {
/* integrate */
float delta_t = (gyro.timestamp - last_gyro) / 1e6f;
gyro_x_integral += gyro.x * delta_t;
gyro_y_integral += gyro.y * delta_t;
gyro_z_integral += gyro.z * delta_t;
}
last_gyro = gyro.timestamp;
}
}
close(sub_gyro);
uint64_t calibration_deadline = hrt_absolute_time() + worker_data->calibration_interval_perside_useconds;
unsigned poll_errcount = 0;
calibration_counter_side = 0;
while (hrt_absolute_time() < calibration_deadline &&
calibration_counter_side < worker_data->calibration_points_perside) {
if (calibrate_cancel_check(worker_data->mavlink_fd, cancel_sub)) {
result = calibrate_return_cancelled;
break;
}
// Wait clocking for new data on all mags
px4_pollfd_struct_t fds[max_mags];
size_t fd_count = 0;
for (size_t cur_mag=0; cur_mag<max_mags; cur_mag++) {
if (worker_data->sub_mag[cur_mag] >= 0) {
fds[fd_count].fd = worker_data->sub_mag[cur_mag];
fds[fd_count].events = POLLIN;
fd_count++;
}
}
int poll_ret = px4_poll(fds, fd_count, 1000);
if (poll_ret > 0) {
int prev_count[max_mags];
bool rejected = false;
for (size_t cur_mag=0; cur_mag<max_mags; cur_mag++) {
prev_count[cur_mag] = worker_data->calibration_counter_total[cur_mag];
if (worker_data->sub_mag[cur_mag] >= 0) {
struct mag_report mag;
orb_copy(ORB_ID(sensor_mag), worker_data->sub_mag[cur_mag], &mag);
// Check if this measurement is good to go in
rejected = rejected || reject_sample(mag.x, mag.y, mag.z,
worker_data->x[cur_mag], worker_data->y[cur_mag], worker_data->z[cur_mag],
worker_data->calibration_counter_total[cur_mag],
calibration_sides * worker_data->calibration_points_perside);
worker_data->x[cur_mag][worker_data->calibration_counter_total[cur_mag]] = mag.x;
worker_data->y[cur_mag][worker_data->calibration_counter_total[cur_mag]] = mag.y;
worker_data->z[cur_mag][worker_data->calibration_counter_total[cur_mag]] = mag.z;
worker_data->calibration_counter_total[cur_mag]++;
}
}
// Keep calibration of all mags in lockstep
if (rejected) {
// Reset counts, since one of the mags rejected the measurement
for (size_t cur_mag = 0; cur_mag < max_mags; cur_mag++) {
worker_data->calibration_counter_total[cur_mag] = prev_count[cur_mag];
}
} else {
calibration_counter_side++;
// Progress indicator for side
mavlink_and_console_log_info(worker_data->mavlink_fd,
"[cal] %s side calibration: progress <%u>",
detect_orientation_str(orientation),
(unsigned)(100 * ((float)calibration_counter_side / (float)worker_data->calibration_points_perside)));
}
} else {
poll_errcount++;
}
if (poll_errcount > worker_data->calibration_points_perside * 3) {
result = calibrate_return_error;
mavlink_and_console_log_info(worker_data->mavlink_fd, CAL_ERROR_SENSOR_MSG);
break;
}
}
if (result == calibrate_return_ok) {
mavlink_and_console_log_info(worker_data->mavlink_fd, "[cal] %s side done, rotate to a different side", detect_orientation_str(orientation));
worker_data->done_count++;
mavlink_and_console_log_info(worker_data->mavlink_fd, CAL_QGC_PROGRESS_MSG, 34 * worker_data->done_count);
}
return result;
}
int calibrate_instance(int mavlink_fd, unsigned s, unsigned device_id)
{
/* 45 seconds */
uint64_t calibration_interval = 25 * 1000 * 1000;
/* maximum 500 values */
const unsigned int calibration_maxcount = 240;
unsigned int calibration_counter;
float *x = NULL;
float *y = NULL;
float *z = NULL;
char str[30];
int res = OK;
/* allocate memory */
mavlink_and_console_log_info(mavlink_fd, CAL_PROGRESS_MSG, sensor_name, 20);
x = reinterpret_cast<float *>(malloc(sizeof(float) * calibration_maxcount));
y = reinterpret_cast<float *>(malloc(sizeof(float) * calibration_maxcount));
z = reinterpret_cast<float *>(malloc(sizeof(float) * calibration_maxcount));
if (x == NULL || y == NULL || z == NULL) {
mavlink_and_console_log_critical(mavlink_fd, "ERROR: out of memory");
/* clean up */
if (x != NULL) {
free(x);
}
if (y != NULL) {
free(y);
}
if (z != NULL) {
free(z);
}
res = ERROR;
return res;
}
if (res == OK) {
int sub_mag = orb_subscribe_multi(ORB_ID(sensor_mag), s);
if (sub_mag < 0) {
mavlink_and_console_log_critical(mavlink_fd, "No mag found, abort");
res = ERROR;
} else {
struct mag_report mag;
/* limit update rate to get equally spaced measurements over time (in ms) */
orb_set_interval(sub_mag, (calibration_interval / 1000) / calibration_maxcount);
/* calibrate offsets */
uint64_t calibration_deadline = hrt_absolute_time() + calibration_interval;
unsigned poll_errcount = 0;
mavlink_and_console_log_info(mavlink_fd, "Turn on all sides: front/back,left/right,up/down");
calibration_counter = 0U;
while (hrt_absolute_time() < calibration_deadline &&
calibration_counter < calibration_maxcount) {
/* wait blocking for new data */
struct pollfd fds[1];
fds[0].fd = sub_mag;
fds[0].events = POLLIN;
int poll_ret = poll(fds, 1, 1000);
if (poll_ret > 0) {
orb_copy(ORB_ID(sensor_mag), sub_mag, &mag);
x[calibration_counter] = mag.x;
y[calibration_counter] = mag.y;
z[calibration_counter] = mag.z;
calibration_counter++;
if (calibration_counter % (calibration_maxcount / 20) == 0) {
mavlink_and_console_log_info(mavlink_fd, CAL_PROGRESS_MSG, sensor_name, 20 + (calibration_counter * 50) / calibration_maxcount);
}
} else {
poll_errcount++;
}
if (poll_errcount > 1000) {
mavlink_and_console_log_critical(mavlink_fd, CAL_FAILED_SENSOR_MSG);
res = ERROR;
break;
}
}
close(sub_mag);
}
}
float sphere_x;
float sphere_y;
float sphere_z;
float sphere_radius;
if (res == OK && calibration_counter > (calibration_maxcount / 2)) {
/* sphere fit */
mavlink_and_console_log_info(mavlink_fd, CAL_PROGRESS_MSG, sensor_name, 70);
sphere_fit_least_squares(x, y, z, calibration_counter, 100, 0.0f, &sphere_x, &sphere_y, &sphere_z, &sphere_radius);
mavlink_and_console_log_info(mavlink_fd, CAL_PROGRESS_MSG, sensor_name, 80);
if (!isfinite(sphere_x) || !isfinite(sphere_y) || !isfinite(sphere_z)) {
mavlink_and_console_log_critical(mavlink_fd, "ERROR: NaN in sphere fit");
res = ERROR;
}
}
if (x != NULL) {
free(x);
}
if (y != NULL) {
free(y);
}
if (z != NULL) {
free(z);
}
if (res == OK) {
/* apply calibration and set parameters */
struct mag_scale mscale;
(void)sprintf(str, "%s%u", MAG_BASE_DEVICE_PATH, s);
int fd = open(str, 0);
res = ioctl(fd, MAGIOCGSCALE, (long unsigned int)&mscale);
if (res != OK) {
mavlink_and_console_log_critical(mavlink_fd, "ERROR: failed to get current calibration");
}
if (res == OK) {
mscale.x_offset = sphere_x;
mscale.y_offset = sphere_y;
mscale.z_offset = sphere_z;
res = ioctl(fd, MAGIOCSSCALE, (long unsigned int)&mscale);
if (res != OK) {
mavlink_and_console_log_critical(mavlink_fd, CAL_FAILED_APPLY_CAL_MSG);
}
}
close(fd);
if (res == OK) {
bool failed = false;
/* set parameters */
(void)sprintf(str, "CAL_MAG%u_ID", s);
failed |= (OK != param_set(param_find(str), &(device_id)));
(void)sprintf(str, "CAL_MAG%u_XOFF", s);
failed |= (OK != param_set(param_find(str), &(mscale.x_offset)));
(void)sprintf(str, "CAL_MAG%u_YOFF", s);
failed |= (OK != param_set(param_find(str), &(mscale.y_offset)));
(void)sprintf(str, "CAL_MAG%u_ZOFF", s);
failed |= (OK != param_set(param_find(str), &(mscale.z_offset)));
(void)sprintf(str, "CAL_MAG%u_XSCALE", s);
failed |= (OK != param_set(param_find(str), &(mscale.x_scale)));
(void)sprintf(str, "CAL_MAG%u_YSCALE", s);
failed |= (OK != param_set(param_find(str), &(mscale.y_scale)));
(void)sprintf(str, "CAL_MAG%u_ZSCALE", s);
failed |= (OK != param_set(param_find(str), &(mscale.z_scale)));
if (failed) {
res = ERROR;
mavlink_and_console_log_critical(mavlink_fd, CAL_FAILED_SET_PARAMS_MSG);
}
mavlink_and_console_log_info(mavlink_fd, CAL_PROGRESS_MSG, sensor_name, 90);
}
mavlink_and_console_log_info(mavlink_fd, "mag off: x:%.2f y:%.2f z:%.2f Ga", (double)mscale.x_offset,
(double)mscale.y_offset, (double)mscale.z_offset);
mavlink_and_console_log_info(mavlink_fd, "mag scale: x:%.2f y:%.2f z:%.2f", (double)mscale.x_scale,
(double)mscale.y_scale, (double)mscale.z_scale);
}
return res;
}
int do_mag_calibration(int mavlink_fd)
{
mavlink_and_console_log_info(mavlink_fd, CAL_QGC_STARTED_MSG, sensor_name);
struct mag_scale mscale_null = {
0.0f,
1.0f,
0.0f,
1.0f,
0.0f,
1.0f,
};
int result = OK;
// Determine which mags are available and reset each
int32_t device_ids[max_mags];
char str[30];
for (size_t i=0; i<max_mags; i++) {
device_ids[i] = 0; // signals no mag
}
for (unsigned cur_mag = 0; cur_mag < max_mags; cur_mag++) {
// Reset mag id to mag not available
(void)sprintf(str, "CAL_MAG%u_ID", cur_mag);
result = param_set_no_notification(param_find(str), &(device_ids[cur_mag]));
if (result != OK) {
mavlink_and_console_log_info(mavlink_fd, "[cal] Unable to reset CAL_MAG%u_ID", cur_mag);
break;
}
// Attempt to open mag
(void)sprintf(str, "%s%u", MAG_BASE_DEVICE_PATH, cur_mag);
int fd = px4_open(str, O_RDONLY);
if (fd < 0) {
continue;
}
// Get device id for this mag
device_ids[cur_mag] = px4_ioctl(fd, DEVIOCGDEVICEID, 0);
// Reset mag scale
result = px4_ioctl(fd, MAGIOCSSCALE, (long unsigned int)&mscale_null);
if (result != OK) {
mavlink_and_console_log_critical(mavlink_fd, CAL_ERROR_RESET_CAL_MSG, cur_mag);
}
/* calibrate range */
if (result == OK) {
result = px4_ioctl(fd, MAGIOCCALIBRATE, fd);
if (result != OK) {
mavlink_and_console_log_info(mavlink_fd, "[cal] Skipped scale calibration, sensor %u", cur_mag);
/* this is non-fatal - mark it accordingly */
result = OK;
}
}
px4_close(fd);
}
// Calibrate all mags at the same time
if (result == OK) {
switch (mag_calibrate_all(mavlink_fd, device_ids)) {
case calibrate_return_cancelled:
// Cancel message already displayed, we're done here
result = ERROR;
break;
case calibrate_return_ok:
/* auto-save to EEPROM */
result = param_save_default();
/* if there is a any preflight-check system response, let the barrage of messages through */
usleep(200000);
if (result == OK) {
mavlink_and_console_log_info(mavlink_fd, CAL_QGC_PROGRESS_MSG, 100);
mavlink_and_console_log_info(mavlink_fd, CAL_QGC_DONE_MSG, sensor_name);
break;
} else {
mavlink_and_console_log_critical(mavlink_fd, CAL_ERROR_SAVE_PARAMS_MSG);
}
// Fall through
default:
mavlink_and_console_log_critical(mavlink_fd, CAL_QGC_FAILED_MSG, sensor_name);
break;
}
}
/* give this message enough time to propagate */
usleep(600000);
return result;
}
bool preflightCheck(orb_advert_t *mavlink_log_pub, bool checkMag, bool checkAcc, bool checkGyro,
bool checkBaro, bool checkAirspeed, bool checkRC, bool checkGNSS, bool checkDynamic, bool reportFailures)
{
bool failed = false;
/* ---- MAG ---- */
if (checkMag) {
bool prime_found = false;
int32_t prime_id = 0;
param_get(param_find("CAL_MAG_PRIME"), &prime_id);
/* check all sensors, but fail only for mandatory ones */
for (unsigned i = 0; i < max_optional_mag_count; i++) {
bool required = (i < max_mandatory_mag_count);
int device_id = -1;
if (!magnometerCheck(mavlink_log_pub, i, !required, device_id, reportFailures) && required) {
failed = true;
}
if (device_id == prime_id) {
prime_found = true;
}
}
/* check if the primary device is present */
if (!prime_found && prime_id != 0) {
if (reportFailures) {
mavlink_and_console_log_critical(mavlink_log_pub, "Warning: Primary compass not found");
}
failed = true;
}
}
/* ---- ACCEL ---- */
if (checkAcc) {
bool prime_found = false;
int32_t prime_id = 0;
param_get(param_find("CAL_ACC_PRIME"), &prime_id);
/* check all sensors, but fail only for mandatory ones */
for (unsigned i = 0; i < max_optional_accel_count; i++) {
bool required = (i < max_mandatory_accel_count);
int device_id = -1;
if (!accelerometerCheck(mavlink_log_pub, i, !required, checkDynamic, device_id, reportFailures) && required) {
failed = true;
}
if (device_id == prime_id) {
prime_found = true;
}
}
/* check if the primary device is present */
if (!prime_found && prime_id != 0) {
if (reportFailures) {
mavlink_and_console_log_critical(mavlink_log_pub, "Warning: Primary accelerometer not found");
}
failed = true;
}
}
/* ---- GYRO ---- */
if (checkGyro) {
bool prime_found = false;
int32_t prime_id = 0;
param_get(param_find("CAL_GYRO_PRIME"), &prime_id);
/* check all sensors, but fail only for mandatory ones */
for (unsigned i = 0; i < max_optional_gyro_count; i++) {
bool required = (i < max_mandatory_gyro_count);
int device_id = -1;
if (!gyroCheck(mavlink_log_pub, i, !required, device_id, reportFailures) && required) {
failed = true;
}
if (device_id == prime_id) {
prime_found = true;
}
}
/* check if the primary device is present */
if (!prime_found && prime_id != 0) {
if (reportFailures) {
mavlink_and_console_log_critical(mavlink_log_pub, "Warning: Primary gyro not found");
}
failed = true;
}
}
/* ---- BARO ---- */
if (checkBaro) {
bool prime_found = false;
int32_t prime_id = 0;
param_get(param_find("CAL_BARO_PRIME"), &prime_id);
/* check all sensors, but fail only for mandatory ones */
for (unsigned i = 0; i < max_optional_baro_count; i++) {
bool required = (i < max_mandatory_baro_count);
int device_id = -1;
if (!baroCheck(mavlink_log_pub, i, !required, device_id, reportFailures) && required) {
failed = true;
}
if (device_id == prime_id) {
prime_found = true;
}
}
// TODO there is no logic in place to calibrate the primary baro yet
// // check if the primary device is present
if (!prime_found && prime_id != 0) {
if (reportFailures) {
mavlink_and_console_log_critical(mavlink_log_pub, "warning: primary barometer not operational");
}
failed = true;
}
}
/* ---- AIRSPEED ---- */
if (checkAirspeed) {
if (!airspeedCheck(mavlink_log_pub, true, reportFailures)) {
failed = true;
}
}
/* ---- RC CALIBRATION ---- */
if (checkRC) {
if (rc_calibration_check(mavlink_log_pub, reportFailures) != OK) {
if (reportFailures) {
mavlink_and_console_log_critical(mavlink_log_pub, "RC calibration check failed");
}
failed = true;
}
}
/* ---- Global Navigation Satellite System receiver ---- */
if (checkGNSS) {
if (!gnssCheck(mavlink_log_pub, reportFailures)) {
failed = true;
}
}
#ifdef __PX4_QURT
// WARNING: Preflight checks are important and should be added back when
// all the sensors are supported
PX4_WARN("WARNING: Preflight checks PASS always.");
failed = false;
#endif
/* Report status */
return !failed;
}
