void TestPlan::testVpmbMetricMultiLevelAir()
{
char *cache = NULL;
setupPrefsVpmb();
prefs.unit_system = METRIC;
prefs.units.length = units::METERS;
struct diveplan testPlan = { 0 };
setupPlanVpmbMultiLevelAir(&testPlan);
setCurrentAppState("PlanDive");
plan(&testPlan, &cache, 1, 0);
#if DEBUG
free(displayed_dive.notes);
displayed_dive.notes = NULL;
save_dive(stdout, &displayed_dive);
#endif
// print first ceiling
printf("First ceiling %.1f m\n", (mbar_to_depth(first_ceiling_pressure.mbar, &displayed_dive) * 0.001));
// check benchmark run time of 167 minutes, and known Subsurface runtime of 169 minutes
QVERIFY(compareDecoTime(displayed_dive.dc.duration.seconds, 167u * 60u + 20u, 169u * 60u + 20u));
}
void TestPlan::testVpmbMetric60m30minTx()
{
char *cache = NULL;
setupPrefsVpmb();
prefs.unit_system = METRIC;
prefs.units.length = units::METERS;
struct diveplan testPlan = { 0 };
setupPlanVpmb60m30minTx(&testPlan);
setCurrentAppState("PlanDive");
plan(&testPlan, &cache, 1, 0);
#if DEBUG
free(displayed_dive.notes);
displayed_dive.notes = NULL;
save_dive(stdout, &displayed_dive);
#endif
// print first ceiling
printf("First ceiling %.1f m\n", (mbar_to_depth(first_ceiling_pressure.mbar, &displayed_dive) * 0.001));
// check first gas change to EAN50 at 21m
struct event *ev = displayed_dive.dc.events;
QVERIFY(ev != NULL);
QCOMPARE(ev->gas.index, 1);
QCOMPARE(ev->value, 50);
QCOMPARE(get_depth_at_time(&displayed_dive.dc, ev->time.seconds), 21000);
// check benchmark run time of 89 minutes, and known Subsurface runtime of 89 minutes
QVERIFY(compareDecoTime(displayed_dive.dc.duration.seconds, 89u * 60u + 20u, 89u * 60u + 20u));
}
void TestPlan::testVpmbMetricMultiLevelAir()
{
struct deco_state *cache = NULL;
setupPrefsVpmb();
prefs.unit_system = METRIC;
prefs.units.length = units::METERS;
struct diveplan testPlan = {};
setupPlanVpmbMultiLevelAir(&testPlan);
setAppState(ApplicationState::PlanDive);
plan(&test_deco_state, &testPlan, &displayed_dive, 60, stoptable, &cache, 1, 0);
#if DEBUG
free(displayed_dive.notes);
displayed_dive.notes = NULL;
save_dive(stdout, &displayed_dive, false);
#endif
// check minimum gas result
struct divedatapoint *dp = testPlan.dp;
while (!dp->minimum_gas.mbar && dp->next)
dp = dp->next;
QCOMPARE(lrint(dp->minimum_gas.mbar / 1000.0), 101l);
// print first ceiling
printf("First ceiling %.1f m\n", (mbar_to_depth(test_deco_state.first_ceiling_pressure.mbar, &displayed_dive) * 0.001));
// check benchmark run time of 167 minutes, and known Subsurface runtime of 169 minutes
QVERIFY(compareDecoTime(displayed_dive.dc.duration.seconds, 167u * 60u + 20u, 169u * 60u + 20u));
}
void TestPlan::testVpmbMetric100m10min()
{
struct deco_state *cache = NULL;
setupPrefsVpmb();
prefs.unit_system = METRIC;
prefs.units.length = units::METERS;
struct diveplan testPlan = {};
setupPlanVpmb100m10min(&testPlan);
setAppState(ApplicationState::PlanDive);
plan(&test_deco_state, &testPlan, &displayed_dive, 60, stoptable, &cache, 1, 0);
#if DEBUG
free(displayed_dive.notes);
displayed_dive.notes = NULL;
save_dive(stdout, &displayed_dive, false);
#endif
// check minimum gas result
struct divedatapoint *dp = testPlan.dp;
while (!dp->minimum_gas.mbar && dp->next)
dp = dp->next;
QCOMPARE(lrint(dp->minimum_gas.mbar / 1000.0), 175l);
// print first ceiling
printf("First ceiling %.1f m\n", (mbar_to_depth(test_deco_state.first_ceiling_pressure.mbar, &displayed_dive) * 0.001));
// check first gas change to EAN50 at 21m
struct event *ev = displayed_dive.dc.events;
QVERIFY(ev != NULL);
QCOMPARE(ev->gas.index, 1);
QCOMPARE(ev->value, 50);
QCOMPARE(get_depth_at_time(&displayed_dive.dc, ev->time.seconds), 21000);
// check second gas change to Oxygen at 6m
ev = ev->next;
QVERIFY(ev != NULL);
QCOMPARE(ev->gas.index, 2);
QCOMPARE(ev->value, 100);
QCOMPARE(get_depth_at_time(&displayed_dive.dc, ev->time.seconds), 6000);
// check benchmark run time of 58 minutes, and known Subsurface runtime of 57 minutes
QVERIFY(compareDecoTime(displayed_dive.dc.duration.seconds, 58u * 60u + 20u, 57u * 60u + 20u));
}
/* This tests that a previously calculated plan isn't affecting the calculations of the next plan.
* It is NOT a 'repetitive dive' test (i.e. with a surface interval and considering tissue
* saturation from the previous dive).
*/
void TestPlan::testVpmbMetricRepeat()
{
char *cache = NULL;
setupPrefsVpmb();
prefs.unit_system = METRIC;
prefs.units.length = units::METERS;
struct diveplan testPlan = { 0 };
setupPlanVpmb30m20min(&testPlan);
setCurrentAppState("PlanDive");
plan(&testPlan, &cache, 1, 0);
#if DEBUG
free(displayed_dive.notes);
displayed_dive.notes = NULL;
save_dive(stdout, &displayed_dive);
#endif
// print first ceiling
printf("First ceiling %.1f m\n", (mbar_to_depth(first_ceiling_pressure.mbar, &displayed_dive) * 0.001));
// check benchmark run time of 27 minutes, and known Subsurface runtime of 27 minutes
QVERIFY(compareDecoTime(displayed_dive.dc.duration.seconds, 27u * 60u + 20u, 27u * 60u + 20u));
int firstDiveRunTimeSeconds = displayed_dive.dc.duration.seconds;
setupPlanVpmb100mTo70m30min(&testPlan);
plan(&testPlan, &cache, 1, 0);
#if DEBUG
free(displayed_dive.notes);
displayed_dive.notes = NULL;
save_dive(stdout, &displayed_dive);
#endif
// print first ceiling
printf("First ceiling %.1f m\n", (mbar_to_depth(first_ceiling_pressure.mbar, &displayed_dive) * 0.001));
// check first gas change to 21/35 at 66m
struct event *ev = displayed_dive.dc.events;
QVERIFY(ev != NULL);
QCOMPARE(ev->gas.index, 1);
QCOMPARE(ev->gas.mix.o2.permille, 210);
QCOMPARE(ev->gas.mix.he.permille, 350);
QCOMPARE(get_depth_at_time(&displayed_dive.dc, ev->time.seconds), 66000);
// check second gas change to EAN50 at 21m
ev = ev->next;
QCOMPARE(ev->gas.index, 2);
QCOMPARE(ev->value, 50);
QCOMPARE(get_depth_at_time(&displayed_dive.dc, ev->time.seconds), 21000);
// check third gas change to Oxygen at 6m
ev = ev->next;
QVERIFY(ev != NULL);
QCOMPARE(ev->gas.index, 3);
QCOMPARE(ev->value, 100);
QCOMPARE(get_depth_at_time(&displayed_dive.dc, ev->time.seconds), 6000);
// we don't have a benchmark, known Subsurface runtime is 126 minutes
QVERIFY(compareDecoTime(displayed_dive.dc.duration.seconds, 126u * 60u + 20u, 126u * 60u + 20u));
setupPlanVpmb30m20min(&testPlan);
plan(&testPlan, &cache, 1, 0);
#if DEBUG
free(displayed_dive.notes);
displayed_dive.notes = NULL;
save_dive(stdout, &displayed_dive);
#endif
// print first ceiling
printf("First ceiling %.1f m\n", (mbar_to_depth(first_ceiling_pressure.mbar, &displayed_dive) * 0.001));
// check runtime is exactly the same as the first time
int finalDiveRunTimeSeconds = displayed_dive.dc.duration.seconds;
QCOMPARE(finalDiveRunTimeSeconds, firstDiveRunTimeSeconds);
}
