int AttachSegment()
{
if (med_attach_segment(Cursegp, &New_segment, Curside, AttachSide)==4) // Used to be WBACK instead of Curside
diagnostic_message("Cannot attach segment - already a connection on current side.");
else {
if (Lock_view_to_cursegp)
set_view_target_from_segment(Cursegp);
vm_angvec_make(&Seg_orientation,0,0,0);
Curside = WBACK;
Update_flags |= UF_WORLD_CHANGED;
autosave_mine(mine_filename);
strcpy(undo_status[Autosave_count], "Attach Segment UNDONE.\n");
mine_changed = 1;
warn_if_concave_segment(Cursegp);
}
return 1;
}
void generate_banked_curve(fix maxscale, vms_equation coeffs) {
vms_vector vec_dir, tvec, b4r4t;
vms_vector coord,prev_point;
fix enddist, nextdist;
int firstsegflag;
fixang rangle, uangle, angle, scaled_ang=0;
fix t;
if (CurveNumSegs) {
const vcsegptr_t cursegp = Cursegp;
extract_up_vector_from_segment(cursegp, b4r4t);
uangle = vm_vec_delta_ang( b4r4t, r4t, r4 );
if (uangle >= F1_0 * 1/8) uangle -= F1_0 * 1/4;
if (uangle >= F1_0 * 1/8) uangle -= F1_0 * 1/4;
if (uangle <= -F1_0 * 1/8) uangle += F1_0 * 1/4;
if (uangle <= -F1_0 * 1/8) uangle += F1_0 * 1/4;
extract_right_vector_from_segment(cursegp, b4r4t);
rangle = vm_vec_delta_ang( b4r4t, r4t, r4 );
if (rangle >= F1_0/8) rangle -= F1_0/4;
if (rangle >= F1_0/8) rangle -= F1_0/4;
if (rangle <= -F1_0/8) rangle += F1_0/4;
if (rangle <= -F1_0/8) rangle += F1_0/4;
angle = uangle;
if (abs(rangle) < abs(uangle)) angle = rangle;
delete_curve();
coord = prev_point = p1;
#define MAGIC_NUM 0.707*F1_0
if (maxscale)
scaled_ang = fixdiv(angle,fixmul(maxscale,MAGIC_NUM));
t=0;
tvec = r1save;
firstsegflag = 1;
enddist = F1_0; nextdist = 0;
while ( enddist > fixmul( nextdist, 1.5*F1_0 )) {
vms_matrix rotmat;
if (firstsegflag==1)
firstsegflag=0;
else
extract_forward_vector_from_segment(cursegp, tvec);
nextdist = vm_vec_mag(tvec); // nextdist := distance to next point
t = curve_dist(&coeffs, 3, t, prev_point, nextdist); // t = argument at which function is forward vector magnitude units away from prev_point (in 3-space, not along curve)
coord = evaluate_curve(&coeffs, 3, t); // coord := point about forward vector magnitude units away from prev_point
enddist = vm_vec_dist(coord, p4); // enddist := distance from current to end point, vec_dir used as a temporary variable
//vm_vec_normalize(vm_vec_sub(&vec_dir, &coord, &prev_point));
vm_vec_normalized_dir(vec_dir, coord, prev_point);
if (!med_attach_segment(Cursegp, vmsegptr(&New_segment), Curside, AttachSide))
{
med_extract_matrix_from_segment(cursegp, &rotmat); // rotmat := matrix describing orientation of Cursegp
const auto tdest = vm_vec_rotate(vec_dir,rotmat); // tdest := vec_dir in reference frame of Cursegp
vec_dir = tdest;
const auto rotmat2 = vm_vec_ang_2_matrix(vec_dir,scaled_ang);
med_rotate_segment( Cursegp, rotmat2 );
prev_point = coord;
Curside = Side_opposite[AttachSide];
CurveSegs[CurveNumSegs]=Cursegp;
CurveNumSegs++;
}
}
}
}
int generate_curve( fix r1scale, fix r4scale ) {
vms_vector vec_dir, tvec;
vms_vector coord,prev_point;
vms_equation coeffs;
fix enddist, nextdist;
int firstsegflag;
fix t, maxscale;
fixang rangle, uangle;
const vcsegptr_t cursegp = Cursegp;
compute_center_point_on_side(p1, cursegp, Curside);
switch( Curside ) {
case WLEFT:
extract_right_vector_from_segment(cursegp, r1);
vm_vec_scale(r1, -F1_0 );
break;
case WTOP:
extract_up_vector_from_segment(cursegp, r1);
break;
case WRIGHT:
extract_right_vector_from_segment(cursegp, r1);
break;
case WBOTTOM:
extract_up_vector_from_segment(cursegp, r1);
vm_vec_scale(r1, -F1_0 );
break;
case WBACK:
extract_forward_vector_from_segment(cursegp, r1);
break;
case WFRONT:
extract_forward_vector_from_segment(cursegp, r1);
vm_vec_scale(r1, -F1_0 );
break;
}
const vcsegptr_t markedsegp = Markedsegp;
compute_center_point_on_side(p4, markedsegp, Markedside);
switch( Markedside ) {
case WLEFT:
extract_right_vector_from_segment(markedsegp, r4);
extract_up_vector_from_segment(markedsegp, r4t);
break;
case WTOP:
extract_up_vector_from_segment(markedsegp, r4);
vm_vec_scale(r4, -F1_0 );
extract_forward_vector_from_segment(markedsegp, r4t);
vm_vec_scale(r4t, -F1_0 );
break;
case WRIGHT:
extract_right_vector_from_segment(markedsegp, r4);
vm_vec_scale(r4, -F1_0 );
extract_up_vector_from_segment(markedsegp, r4t);
break;
case WBOTTOM:
extract_up_vector_from_segment(markedsegp, r4);
extract_forward_vector_from_segment(markedsegp, r4t);
break;
case WBACK:
extract_forward_vector_from_segment(markedsegp, r4);
vm_vec_scale(r4, -F1_0 );
extract_up_vector_from_segment(markedsegp, r4t);
break;
case WFRONT:
extract_forward_vector_from_segment(markedsegp, r4);
extract_up_vector_from_segment(markedsegp, r4t);
break;
}
r1save = r1;
tvec = r1;
vm_vec_scale(r1,r1scale);
vm_vec_scale(r4,r4scale);
create_curve( p1, p4, r1, r4, coeffs );
OriginalSeg = Cursegp;
OriginalMarkedSeg = Markedsegp;
OriginalSide = Curside;
OriginalMarkedSide = Markedside;
CurveNumSegs = 0;
coord = prev_point = p1;
t=0;
firstsegflag = 1;
enddist = F1_0; nextdist = 0;
while ( enddist > fixmul( nextdist, 1.5*F1_0 )) {
vms_matrix rotmat;
if (firstsegflag==1)
firstsegflag=0;
else
extract_forward_vector_from_segment(cursegp, tvec);
nextdist = vm_vec_mag(tvec); // nextdist := distance to next point
t = curve_dist(&coeffs, 3, t, prev_point, nextdist); // t = argument at which function is forward vector magnitude units away from prev_point (in 3-space, not along curve)
coord = evaluate_curve(&coeffs, 3, t); // coord := point about forward vector magnitude units away from prev_point
enddist = vm_vec_dist(coord, p4); // enddist := distance from current to end point, vec_dir used as a temporary variable
//vm_vec_normalize(vm_vec_sub(&vec_dir, &coord, &prev_point));
vm_vec_normalized_dir(vec_dir, coord, prev_point);
if (!med_attach_segment(Cursegp, vmsegptr(&New_segment), Curside, AttachSide))
{
med_extract_matrix_from_segment(cursegp, &rotmat); // rotmat := matrix describing orientation of Cursegp
const auto tdest = vm_vec_rotate(vec_dir,rotmat); // tdest := vec_dir in reference frame of Cursegp
vec_dir = tdest;
const auto rotmat2 = vm_vector_2_matrix(vec_dir,nullptr,nullptr);
med_rotate_segment( Cursegp, rotmat2 );
prev_point = coord;
Curside = Side_opposite[AttachSide];
CurveSegs[CurveNumSegs]=Cursegp;
CurveNumSegs++;
} else return 0;
}
extract_up_vector_from_segment(cursegp, tvec);
uangle = vm_vec_delta_ang( tvec, r4t, r4 );
if (uangle >= F1_0 * 1/8) uangle -= F1_0 * 1/4;
if (uangle >= F1_0 * 1/8) uangle -= F1_0 * 1/4;
if (uangle <= -F1_0 * 1/8) uangle += F1_0 * 1/4;
if (uangle <= -F1_0 * 1/8) uangle += F1_0 * 1/4;
extract_right_vector_from_segment(cursegp, tvec);
rangle = vm_vec_delta_ang( tvec, r4t, r4 );
if (rangle >= F1_0/8) rangle -= F1_0/4;
if (rangle >= F1_0/8) rangle -= F1_0/4;
if (rangle <= -F1_0/8) rangle += F1_0/4;
if (rangle <= -F1_0/8) rangle += F1_0/4;
if ((uangle != 0) && (rangle != 0)) {
maxscale = CurveNumSegs*F1_0;
generate_banked_curve(maxscale, coeffs);
}
if (CurveNumSegs) {
med_form_bridge_segment( Cursegp, Side_opposite[AttachSide], Markedsegp, Markedside );
CurveSegs[CurveNumSegs] = vmsegptr(Markedsegp->children[Markedside]);
CurveNumSegs++;
}
Cursegp = OriginalSeg;
Curside = OriginalSide;
med_create_new_segment_from_cursegp();
//warn_if_concave_segments();
if (CurveNumSegs) return 1;
else return 0;
}
