/*
* i2c client ftn.
*/
static int __devinit mhl_Sii8334_probe(struct i2c_client *client,
const struct i2c_device_id *dev_id)
{
int ret = 0;
if(match_id(&mhl_Sii8334_idtable[0], client)){
sii8334_PAGE_TPI = client;
dev_info(&client->adapter->dev, "attached %s "
"into i2c adapter successfully\n", dev_id->name);
}
/*
else if(match_id(&mhl_Sii8334_idtable[1], client)){
sii8334_PAGE_TX_L0 = client;
dev_info(&client->adapter->dev, "attached %s "
"into i2c adapter successfully \n", dev_id->name);
}
*/
else if(match_id(&mhl_Sii8334_idtable[2], client)){
sii8334_PAGE_TX_L1 = client;
dev_info(&client->adapter->dev, "attached %s "
"into i2c adapter successfully \n", dev_id->name);
}else if(match_id(&mhl_Sii8334_idtable[3], client)){
sii8334_PAGE_TX_2 = client;
dev_info(&client->adapter->dev, "attached %s "
"into i2c adapter successfully\n", dev_id->name);
}else if(match_id(&mhl_Sii8334_idtable[4], client)){
sii8334_PAGE_TX_3 = client;
dev_info(&client->adapter->dev, "attached %s "
"into i2c adapter successfully\n", dev_id->name);
}else if(match_id(&mhl_Sii8334_idtable[5], client)) {
sii8334_PAGE_CBUS = client;
dev_info(&client->adapter->dev, "attached %s "
"into i2c adapter successfully\n", dev_id->name);
}else{
dev_info(&client->adapter->dev, "invalid i2c adapter: can not found dev_id matched\n");
return -EIO;
}
if(sii8334_PAGE_TPI != NULL
//&&sii8334_PAGE_TX_L0 != NULL
&&sii8334_PAGE_TX_L1 != NULL
&& sii8334_PAGE_TX_2 != NULL
&& sii8334_PAGE_TX_3 != NULL
&& sii8334_PAGE_CBUS != NULL){
Sii8334_plat_data = sii8334_PAGE_TPI->dev.platform_data;
#ifdef mhl_power_dbg
ret = Sii8334_plat_data->mhl_power_on();
if(ret){
printk("%s:call mhl_power_on failed.\n", __func__);
}
//added by zhangyue on 2011-11-21 for config irq
Sii8334_plat_data->mhl_irq_config();
//added by zhangyue on 2011-11-21 end
#endif
if(false == Sii8334_mhl_reset()){
printk("/nCan't find the reset function in your platform file============================================\n");
return -EIO;
}
// Announce on RS232c port.
//
printk("\n============================================\n");
printk("SiI-8334 Driver Version based on 8051 driver Version 1.14 \n");
printk("============================================\n");
//
// Initialize the registers as required. Setup firmware vars.
//
SiiMhlTxInitialize();
#ifdef SiI8334DRIVER_INTERRUPT_MODE
#ifdef zy_dbg_err_handle
sii8334work = kmalloc(sizeof(*sii8334work), GFP_KERNEL);
if(NULL == sii8334work){
printk(KERN_ERR "NO memory for allocating sii8334work.\n");
ret = -ENOMEM;
goto ERR_ALLOC_INT_WORK;
}
#else
sii8334work = kmalloc(sizeof(*sii8334work), GFP_ATOMIC);
#endif
INIT_WORK(sii8334work, work_queue);
#ifdef mhl_power_dbg
#ifdef zy_dbg_err_handle
ResumeWork = kmalloc(sizeof(*ResumeWork ), GFP_ATOMIC);
if(NULL == ResumeWork){
printk(KERN_ERR "NO memory for allocating ResumeWork.\n");
ret = -ENOMEM;
goto ERR_ALLOC_RESUM_WORK;
}
#else
ResumeWork = kmalloc(sizeof(*ResumeWork ), GFP_ATOMIC);
#endif
INIT_DELAYED_WORK(ResumeWork, ResumeWorkFunc);
#endif
#ifdef ZY_IMPLEMENT_RCP
mhl_state.rmt_input = input_allocate_device();
if(NULL == mhl_state.rmt_input){
printk(KERN_INFO "Bad input_allocate_device()\n");
ret = -ENOMEM;
goto ERR_ALLOC_INPUT;
}
mhl_init_rmt_input_dev();
//Register with the Input subsystem
ret = input_register_device(mhl_state.rmt_input);
if(ret){
printk(KERN_INFO "Register input device failed.\n ");
goto ERR_REG_INPUT;
}
#endif
#ifdef zy_dbg_irq
//modified by zhangyue on 2011-12-07
//for debugging, because some time, the irq handler not run when the irq came.
ret = request_threaded_irq(sii8334_PAGE_TPI->irq, NULL, Sii8334_mhl_interrupt, IRQ_TYPE_LEVEL_LOW |IRQF_ONESHOT,
sii8334_PAGE_TPI->name, sii8334_PAGE_TPI);
#else
ret = request_irq(sii8334_PAGE_TPI->irq, Sii8334_mhl_interrupt, IRQ_TYPE_LEVEL_LOW,
sii8334_PAGE_TPI->name, sii8334_PAGE_TPI);
#endif
if (ret){
printk(KERN_INFO "%s:%d:Sii8334 interrupt failed\n", __func__,__LINE__);
#ifdef zy_dbg_err_handle
goto ERR_REQ_IRQ;
#endif
//free_irq(irq, iface);
}else{
#ifdef zy_usrspace_enalbe_mhl_irq
//modified by zhangyue on 2011-12-26 for debugging the mhl charging start
disable_irq(sii8334_PAGE_TPI->irq);
HalTimerWait(40);//sleep 40ms
enable_irq(sii8334_PAGE_TPI->irq);
//disable_irq(sii8334_PAGE_TPI->irq);
//modified by zhangyue on 2011-12-26 for debugging the mhl charging end
#else
enable_irq_wake(sii8334_PAGE_TPI->irq);
#endif
//printk(KERN_INFO "%s:%d:Sii8334 interrupt successed\n", __func__,__LINE__);
}
#ifdef zy_usrspace_enalbe_mhl_irq
mhl_state.irq_Inited = false;
#endif
#ifdef mhl_power_dbg
mhl_state.state = true;
#endif
#else
StartEventThread(); /* begin monitoring for events if using polling mode*/
#endif
#ifdef zy_dbg_err_handle
goto ERR_ALLOC_INT_WORK;
#endif
ERR_REQ_IRQ:
input_unregister_device(mhl_state.rmt_input);
ERR_REG_INPUT:
input_free_device(mhl_state.rmt_input);
ERR_ALLOC_INPUT:
kfree(ResumeWork);
ERR_ALLOC_RESUM_WORK:
kfree(sii8334work);
}
ERR_ALLOC_INT_WORK:
return ret;
}
static int hdmi_drv_init(void)
{
halReturn_t halStatus;
SiiOsStatus_t osalStatus;
printk("Starting %s\n", MHL_PART_NAME);
if(!SiiCraInitialize())
{
SII_DEBUG_PRINT(SII_OSAL_DEBUG_TRACE,"Initialization of CRA layer failed!\n");
return -EIO;
}
osalStatus = SiiOsInit(0);
if (osalStatus != SII_OS_STATUS_SUCCESS)
{
SII_DEBUG_PRINT(SII_OSAL_DEBUG_TRACE,"Initialization of OSAL failed, error code: %d\n",osalStatus);
return -EIO;
}
halStatus = HalInit();
if (halStatus != HAL_RET_SUCCESS)
{
SII_DEBUG_PRINT(SII_OSAL_DEBUG_TRACE,"Initialization of HAL failed, error code: %d\n",halStatus);
SiiOsTerm();
return -EIO;
}
//#if MTK_project
//xuecheng
//I2c_Init();
//#endif
halStatus = HalOpenI2cDevice(MHL_PART_NAME, MHL_DRIVER_NAME);
if (halStatus != HAL_RET_SUCCESS)
{
SII_DEBUG_PRINT(SII_OSAL_DEBUG_TRACE,"Opening of I2c device %s failed, error code: %d\n",
MHL_PART_NAME, halStatus);
HalTerm();
SiiOsTerm();
return -EIO;
}
//msleep(200);
#ifdef SiI8338DRIVER_INTERRUPT_MODE
halStatus = HalInstallIrqHandler(SiiMhlTxDeviceIsr);
if (halStatus != HAL_RET_SUCCESS)
{
SII_DEBUG_PRINT(SII_OSAL_DEBUG_TRACE,"Initialization of HAL interrupt support failed, error code: %d\n",
halStatus);
HalCloseI2cDevice();
HalTerm();
SiiOsTerm();
return -EIO;
}
#else
StartEventThread(); /* begin monitoring for events if using polling mode*/
#endif
mhl_init_rmt_input_dev();
return 0;
}
/*
* i2c client ftn.
*/
static int __devinit mhl_Sii8334_probe(struct i2c_client *client,
const struct i2c_device_id *dev_id)
{
int ret = 0;
if(match_id(&mhl_Sii8334_idtable[0], client))
{
sii8334_PAGE_TPI = client;
dev_info(&client->adapter->dev, "attached %s "
"into i2c adapter successfully\n", dev_id->name);
}
/*
else if(match_id(&mhl_Sii8334_idtable[1], client))
{
sii8334_PAGE_TX_L0 = client;
dev_info(&client->adapter->dev, "attached %s "
"into i2c adapter successfully \n", dev_id->name);
}
*/
else if(match_id(&mhl_Sii8334_idtable[2], client))
{
sii8334_PAGE_TX_L1 = client;
dev_info(&client->adapter->dev, "attached %s "
"into i2c adapter successfully \n", dev_id->name);
}
else if(match_id(&mhl_Sii8334_idtable[3], client))
{
sii8334_PAGE_TX_2 = client;
dev_info(&client->adapter->dev, "attached %s "
"into i2c adapter successfully\n", dev_id->name);
}
else if(match_id(&mhl_Sii8334_idtable[4], client))
{
sii8334_PAGE_TX_3 = client;
dev_info(&client->adapter->dev, "attached %s "
"into i2c adapter successfully\n", dev_id->name);
}
else if(match_id(&mhl_Sii8334_idtable[5], client))
{
sii8334_PAGE_CBUS = client;
dev_info(&client->adapter->dev, "attached %s "
"into i2c adapter successfully\n", dev_id->name);
}
else
{
dev_info(&client->adapter->dev, "invalid i2c adapter: can not found dev_id matched\n");
return -EIO;
}
if(sii8334_PAGE_TPI != NULL
//&&sii8334_PAGE_TX_L0 != NULL
&&sii8334_PAGE_TX_L1 != NULL
&& sii8334_PAGE_TX_2 != NULL
&& sii8334_PAGE_TX_3 != NULL
&& sii8334_PAGE_CBUS != NULL)
{
// Announce on RS232c port.
//
printk("\n============================================\n");
printk("SiI-8334 Driver Version based on 8051 driver Version 1.0066 \n");
printk("============================================\n");
if(false == Sii8334_mhl_reset()){
printk("/nCan't find the reset function in your platform file============================================\n");
return -EIO;
}
//
// Initialize the registers as required. Setup firmware vars.
//
//for RCP report function by garyyuan
mhl_init_rmt_input_dev();
SiiMhlTxInitialize();
#ifdef SiI8334DRIVER_INTERRUPT_MODE
sii8334work = kmalloc(sizeof(*sii8334work), GFP_ATOMIC);
INIT_WORK(sii8334work, work_queue);
ret = request_irq(sii8334_PAGE_TPI->irq, Sii8334_mhl_interrupt, IRQ_TYPE_LEVEL_LOW,
sii8334_PAGE_TPI->name, sii8334_PAGE_TPI);
if (ret)
printk(KERN_INFO "%s:%d:Sii8334 interrupt failed\n", __func__,__LINE__);
//free_irq(irq, iface);
else{
enable_irq_wake(sii8334_PAGE_TPI->irq);
//printk(KERN_INFO "%s:%d:Sii8334 interrupt successed\n", __func__,__LINE__);
}
#else
StartEventThread(); /* begin monitoring for events if using polling mode*/
#endif
}
return ret;
}
