/*
** There is a delay between when the VIC sends its signal, and when the display
** shows that signal. There is another delay between the display and when
** the lightpen says that it saw that signal. Each display and pen is different.
** Therefore, the driver must be calibrated to them. A white bar is painted on
** the screen; and, a line is drawn down the middle of it. When the user clicks
** on that line, the difference between its position and where the VIC thinks
** that the pen is pointing becomes an offset that is subtracted from what the
** VIC sees.
*/
void __fastcall__ pen_calibrate (unsigned char *XOffset)
{
unsigned char oldBg = bgcolor (COLOR_BLUE);
unsigned char oldText = textcolor (COLOR_GRAY3);
unsigned char oldRev = revers (1);
unsigned char sprite0Color = VIC.spr_color[0];
unsigned char width, width2, height, height4, height8;
struct mouse_info info;
screensize (&width, &height);
width2 = width / 2;
height4 = height / 4;
height8 = height4 * 8;
/* Draw a bar and line. */
clrscr ();
cclearxy (0, height4, height4 * width);
cvlinexy (width2, height4 + 1, height4 - 2);
revers (0);
/* Print instructions. */
cputsxy (width2 - (sizeof COMMAND1) / 2, height / 2 + 1, COMMAND1);
cputsxy (width2 - (sizeof COMMAND2) / 2, height / 2 + 3, COMMAND2);
VIC.spr_color[0] = COLOR_GRAY2;
mouse_show ();
mouse_move (width2 * 8, height8 / 2);
for (;;) {
/* Wait for the main button to be released. */
do ; while ((mouse_buttons () & MOUSE_BTN_LEFT));
/* Wait for the main button to be pressed. */
do {
mouse_info (&info);
} while (!(info.buttons & MOUSE_BTN_LEFT));
/* Find out if the pen is on or off the bar. */
if (info.pos.y < height8 || info.pos.y >= height8 * 2) {
break;
}
/* On the bar; adjust the offset. */
/* Characters are eight pixels wide.
** The VIC-II sees every other pixel;
** so, we use half of the difference.
*/
*XOffset += (info.pos.x - (width2 * 8 + 8/2)) / 2;
}
/* Off the bar; wait for the main button to be released. */
do ; while ((mouse_buttons () & MOUSE_BTN_LEFT));
mouse_hide ();
VIC.spr_color[0] = sprite0Color;
revers (oldRev);
textcolor (oldText);
bgcolor (oldBg);
clrscr ();
}
int main( void )
{
int i = 0;
int bufIndx;
int bufPage;
int charCnt;
char cursorx;
char cursory;
memcpy ((void*) SPRITE0_DATA, MouseSprite, sizeof (MouseSprite));
/* Load and install the mouse driver */
mouse_load_driver (&mouse_def_callbacks, DRIVER);
/* Set the VIC sprite pointer */
*(unsigned char*)SPRITE0_PTR = SPRITE0_DATA / 64;
VIC.spr0_color = COLOR_WHITE;
bgcolor (0);
bordercolor (0);
clrscr ();
while( showAddrsBar()<1){bufPage=1;}
bufPage=1;
bufIndx=0;
charCnt = screenRender(bufIndx);
cursorx=20;
cursory=11;
mouse_show();
mouse_move (cursorx , cursory);
while( sRunning )
{
if( kbhit() )
{
//uint8_t pet = cgetc();
char pet = cgetc();
switch( pet )
{
//Move cursor down
case PETSCII_DOWN:
if(cursory < screenPixH){
cursory++;
mouse_move (cursorx , cursory);
}
break;
//Move cursor up
case PETSCII_UP:
if(cursory > 0){
cursory--;
mouse_move (cursorx , cursory);
}
break;
//Move cursor left
case PETSCII_LEFT:
if(cursorx > 0){
cursorx--;
mouse_move (cursorx , cursory);
}
break;
//Move cursor right
case PETSCII_RIGHT:
if(cursorx < screenPixW-1){
cursorx++;
mouse_move (cursorx , cursory);
}
break;
//Scroll UP
case PETSCII_F1:
bufIndx = bufIndx - charCnt;
if(bufIndx <0){
if(bufPage>1){
getData();
bufIndx=bufSize - charCnt;
bufPage--;
textcolor(bufPage);
}
else{bufIndx=0;}
}
charCnt = screenRender(bufIndx);
break;
//Scroll DOWN
case PETSCII_F7:
bufIndx = bufIndx + charCnt;
if(bufIndx > bufSize){
cbm_read( 2, sRecvBuf, sizeof(sRecvBuf));
bufIndx=0;
bufPage++;
textcolor(bufPage);
}
charCnt = screenRender(bufIndx);
break;
//Show URL address entry bar
case PETSCII_STOP:
if(showAddrsBar() >0){
bufPage=1;
bufIndx=0;
charCnt = screenRender(bufIndx);
}
break;
}
}
}
cbm_close( 2 );
cbm_close( 7 );
cbm_close( 8 );
return(0);
}
int main (void)
#endif
{
struct mouse_info info;
struct mouse_box full_box, small_box;
unsigned char width, height;
char C;
bool Invisible = true, Done = false, Jailed = false;
#ifdef __ATARIXL__
cprintf ("adding heap: $%04X bytes at $%04X\r\n",
&_HIDDEN_RAM_SIZE__ - (&_HIDDEN_RAM_LAST__ - &_HIDDEN_RAM_START__),
&_HIDDEN_RAM_LAST__);
_heapadd (&_HIDDEN_RAM_LAST__, (size_t)(&_HIDDEN_RAM_SIZE__ - (&_HIDDEN_RAM_LAST__ - &_HIDDEN_RAM_START__)));
cgetc ();
#endif
#ifndef NO_DEBUG
/* Initialize the debugger */
DbgInit (0);
#endif
/* Set dark-on-light colors. Clear the screen. */
#ifdef __CBM__
(void) bordercolor (COLOR_GRAY2);
(void) bgcolor (COLOR_WHITE);
(void) textcolor (COLOR_GRAY1);
#else
(void) bordercolor (COLOR_BLUE);
(void) bgcolor (COLOR_WHITE);
(void) textcolor (COLOR_BLACK);
#endif
cursor (0);
clrscr ();
/* If a lightpen driver is installed, then it can get a calibration value
** from this file (if it exists). Or, the user can adjust the pen; and,
** the value will be put into this file, for the next time.
** (Other drivers will ignore this.)
*/
#if defined(__C64__) || defined(__C128__) || defined(__CBM510__)
pen_adjust ("pen.dat");
#endif
#if DYN_DRV
/* If a dynamically loadable driver is named on the command line,
** then use that driver instead of the standard one.
*/
if (argc > 1) {
mouse_name = argv[1];
} else {
#if defined(__ATARI__) || defined(__C64__) || defined(__C128__)
char selection, flag = 0;
cprintf ("Select mouse driver:\r\n"
" 0 - Joystick\r\n"
#ifdef __ATARI__
" 1 - ST Mouse\r\n"
" 2 - Amiga Mouse\r\n"
" 3 - Atari Trakball\r\n"
" 4 - Atari TouchPad\r\n"
#else
" 1 - 1351 Mouse\r\n"
" 2 - Inkwell Mouse\r\n"
" 3 - Paddle\r\n"
#endif
"Enter selection: ");
while (1) {
switch (selection = cgetc ()) {
case '0': mouse_name = MSENAME_0; flag = 1; break;
case '1': mouse_name = MSENAME_1; flag = 1; break;
case '2': mouse_name = MSENAME_2; flag = 1; break;
case '3': mouse_name = MSENAME_3; flag = 1; break;
#ifdef __ATARI__
case '4': mouse_name = MSENAME_4; flag = 1; break;
#endif
}
if (flag) break;
}
cprintf ("%c\r\nOK, loading \"%s\",\r\nplease wait patiently...\r\n", selection, mouse_name);
#else
/* Output a warning about the standard driver that is needed. */
DoWarning ();
mouse_name = mouse_stddrv;
#endif
}
/* Load and install the driver. */
CheckError ("mouse_load_driver",
mouse_load_driver (&MOUSE_CALLBACK, mouse_name));
#else /* not DYN_DRV */
#if !defined(MOUSE_DRIVER) && (defined(__ATARI__) || defined(__C64__) || defined(__C128__))
{
char selection, flag = 0;
cprintf ("Select mouse driver:\r\n"
" 0 - Joystick\r\n"
#ifdef __ATARI__
" 1 - ST Mouse\r\n"
" 2 - Amiga Mouse\r\n"
" 3 - Atari Trakball\r\n"
" 4 - Atari TouchPad\r\n"
#else
" 1 - 1351 Mouse\r\n"
" 2 - Inkwell Mouse\r\n"
" 3 - Paddle\r\n"
#endif
"Enter selection: ");
while (1) {
switch (selection = cgetc ()) {
case '0': mouse_drv_use = MSESTAT_0; flag = 1; break;
case '1': mouse_drv_use = MSESTAT_1; flag = 1; break;
case '2': mouse_drv_use = MSESTAT_2; flag = 1; break;
case '3': mouse_drv_use = MSESTAT_3; flag = 1; break;
#ifdef __ATARI__
case '4': mouse_drv_use = MSESTAT_4; flag = 1; break;
#endif
}
if (flag) break;
}
}
#else
mouse_drv_use = mouse_static_stddrv;
#endif
/* Install the driver. */
CheckError ("mouse_install",
mouse_install (&MOUSE_CALLBACK,
# ifdef MOUSE_DRIVER
MOUSE_DRIVER
# else
#if defined(__ATARI__) || defined(__C64__) || defined(__C128__)
mouse_drv_use
#else
mouse_static_stddrv
#endif
# endif
));
#endif
#ifndef NO_JAIL
/* Get the initial bounding box. */
mouse_getbox (&full_box);
#endif
screensize (&width, &height);
top:
clrscr ();
/* Print a help line */
cputs (" d)ebug h)ide q)uit s)how j)ail");
gotoxy (1, 20);
cprintf ("SP: $%04X", getsp());
/* Put a cross at the center of the screen. */
gotoxy (width / 2 - 3, height / 2 - 1);
#if defined(__CBM__)
cprintf ("%3u,%3u\r\n%*s\xDB", width / 2 * 8 + 4, height / 2 * 8 + 4,
width / 2, "");
#else
cprintf ("%3u,%3u\r\n%*s+", width / 2 * 8 + 4, height / 2 * 8 + 4,
width / 2, "");
#endif
/* Test loop */
ShowState (Jailed, Invisible);
do {
/* Get the current co-ordinates and button states; and, print them. */
mouse_info (&info);
gotoxy (0, 2);
cprintf (" X = %3d\r\n", info.pos.x);
cprintf (" Y = %3d\r\n", info.pos.y);
cprintf (" B1 = %c\r\n", (info.buttons & MOUSE_BTN_LEFT) ?
#ifdef __CBM__
0x5F
#else
'v'
#endif
: '^');
cprintf (" B2 = %c", (info.buttons & MOUSE_BTN_RIGHT) ?
#ifdef __CBM__
0x5F
#else
'v'
#endif
: '^');
/* Handle user input */
if (kbhit ()) {
cclearxy (1, 9, 23);
switch (tolower (C = cgetc ())) {
#ifndef NO_DEBUG
case 'd':
BREAK();
/* The debugger might have changed the colors.
** Restore them.
*/
#ifdef __CBM__
(void) bordercolor (COLOR_GRAY2);
(void) bgcolor (COLOR_WHITE);
(void) textcolor (COLOR_GRAY1);
#else
(void) bordercolor (COLOR_BLUE);
(void) bgcolor (COLOR_WHITE);
(void) textcolor (COLOR_BLACK);
#endif
/* The debugger changed the screen; restore it. */
goto top;
#endif
case 'h':
mouse_hide ();
ShowState (Jailed, ++Invisible);
break;
#ifndef NO_JAIL
case 'j':
if (Jailed) {
mouse_setbox (&full_box);
Jailed = false;
} else {
small_box.minx = max (info.pos.x - 10, full_box.minx);
small_box.miny = max (info.pos.y - 10, full_box.miny);
small_box.maxx = min (info.pos.x + 10, full_box.maxx);
small_box.maxy = min (info.pos.y + 10, full_box.maxy);
mouse_setbox (&small_box);
Jailed = true;
}
ShowState (Jailed, Invisible);
break;
#endif
case 's':
mouse_show ();
if (Invisible) {
ShowState (Jailed, --Invisible);
}
break;
case 'q':
Done = true;
break;
default:
gotoxy (1, 9);
cprintf ("Spurious character: $%02X", C);
}
}
} while (!Done);
#if DYN_DRV
/* Uninstall and unload the driver. */
CheckError ("mouse_unload", mouse_unload ());
#else
/* Uninstall the static driver. */
CheckError ("mouse_uninstall", mouse_uninstall ());
#endif
/* Say goodbye */
cputsxy (0, height / 2 + 3, "Goodbye!");
return EXIT_SUCCESS;
}
int main (void)
#endif
{
struct mouse_info info;
struct mouse_box full_box, small_box;
unsigned char width, height;
char C;
bool Invisible = true, Done = false, Jailed = false;
/* Initialize the debugger */
DbgInit (0);
/* Set dark-on-light colors. Clear the screen. */
#ifdef __CBM__
(void) bordercolor (COLOR_GRAY2);
(void) bgcolor (COLOR_WHITE);
(void) textcolor (COLOR_GRAY1);
#else
(void) bordercolor (COLOR_BLUE);
(void) bgcolor (COLOR_WHITE);
(void) textcolor (COLOR_BLACK);
#endif
cursor (0);
clrscr ();
/* If a lightpen driver is installed, then it can get a calibration value
** from this file (if it exists). Or, the user can adjust the pen; and,
** the value will be put into this file, for the next time.
** (Other drivers will ignore this.)
*/
#if defined(__C64__) || defined(__C128__) || defined(__CBM510__)
pen_adjust ("pen.dat");
#endif
#if DYN_DRV
/* If a dynamically loadable driver is named on the command line,
** then use that driver instead of the standard one.
*/
if (argc > 1) {
mouse_name = argv[1];
} else {
/* Output a warning about the standard driver that is needed. */
DoWarning ();
mouse_name = mouse_stddrv;
}
/* Load and install the driver. */
CheckError ("mouse_load_driver",
mouse_load_driver (&mouse_def_callbacks, mouse_name));
#else
/* Install the driver. */
CheckError ("mouse_install",
mouse_install (&mouse_def_callbacks,
# ifdef MOUSE_DRIVER
MOUSE_DRIVER
# else
mouse_static_stddrv
# endif
));
#endif
/* Get the initial bounding box. */
mouse_getbox (&full_box);
screensize (&width, &height);
top:
clrscr ();
/* Print a help line */
cputs (" d)ebug h)ide q)uit s)how j)ail");
/* Put a cross at the center of the screen. */
gotoxy (width / 2 - 3, height / 2 - 1);
#if defined(__CBM__)
cprintf ("%3u,%3u\r\n%*s\xDB", width / 2 * 8 + 4, height / 2 * 8 + 4,
width / 2, "");
#else
cprintf ("%3u,%3u\r\n%*s+", width / 2 * 8 + 4, height / 2 * 8 + 4,
width / 2, "");
#endif
/* Test loop */
ShowState (Jailed, Invisible);
do {
/* Get the current co-ordinates and button states; and, print them. */
mouse_info (&info);
gotoxy (0, 2);
cprintf (" X = %3d\r\n", info.pos.x);
cprintf (" Y = %3d\r\n", info.pos.y);
cprintf (" B1 = %c\r\n", (info.buttons & MOUSE_BTN_LEFT) ?
#ifdef __CBM__
0x5F
#else
'v'
#endif
: '^');
cprintf (" B2 = %c", (info.buttons & MOUSE_BTN_RIGHT) ?
#ifdef __CBM__
0x5F
#else
'v'
#endif
: '^');
/* Handle user input */
if (kbhit ()) {
cclearxy (1, 9, 23);
switch (tolower (C = cgetc ())) {
case 'd':
BREAK();
/* The debugger might have changed the colors.
** Restore them.
*/
#ifdef __CBM__
(void) bordercolor (COLOR_GRAY2);
(void) bgcolor (COLOR_WHITE);
(void) textcolor (COLOR_GRAY1);
#else
(void) bordercolor (COLOR_BLUE);
(void) bgcolor (COLOR_WHITE);
(void) textcolor (COLOR_BLACK);
#endif
/* The debugger changed the screen; restore it. */
goto top;
case 'h':
mouse_hide ();
ShowState (Jailed, ++Invisible);
break;
case 'j':
if (Jailed) {
mouse_setbox (&full_box);
Jailed = false;
} else {
small_box.minx = max (info.pos.x - 10, full_box.minx);
small_box.miny = max (info.pos.y - 10, full_box.miny);
small_box.maxx = min (info.pos.x + 10, full_box.maxx);
small_box.maxy = min (info.pos.y + 10, full_box.maxy);
mouse_setbox (&small_box);
Jailed = true;
}
ShowState (Jailed, Invisible);
break;
case 's':
mouse_show ();
if (Invisible) {
ShowState (Jailed, --Invisible);
}
break;
case 'q':
Done = true;
break;
default:
gotoxy (1, 9);
cprintf ("Spurious character: $%02X", C);
}
}
} while (!Done);
#if DYN_DRV
/* Uninstall and unload the driver. */
CheckError ("mouse_unload", mouse_unload ());
#else
/* Uninstall the static driver. */
CheckError ("mouse_uninstall", mouse_uninstall ());
#endif
/* Say goodbye */
cputsxy (0, height / 2 + 3, "Goodbye!");
return EXIT_SUCCESS;
}
