Example #1
0
    // send the sync complete message
    errlHndl_t AttributeSync::sendSyncCompleteMessage( )
    {
        TARG_INF("sending sync complete message");

        errlHndl_t l_err = NULL;

        msg_t * msg = msg_allocate();

        // initialize msg buffer
        memset( msg, 0, sizeof(msg_t) );

        msg->type = ATTR_SYNC_COMPLETE_TO_FSP;

        ATTR_SYNC_ADD_PAGE_COUNT( iv_total_pages, msg->data[0] );

        l_err = sendMboxMessage( SYNCHRONOUS, msg );

        if( l_err == NULL )
        {
            // see if there was an error on the other end
            ATTR_SYNC_RC return_code = ATTR_SYNC_GET_RC( msg->data[0] );

            if ( return_code )
            {
                TARG_ERR("Attribute sync failed with return code: 0x%x", return_code );
                TARG_ERR("Failed syncing iv_total_pages: 0x%x from iv_section_to_sync: 0x%x",
                          iv_total_pages,iv_section_to_sync );

                /*@
                 *   @errortype
                 *   @moduleid          TARG_MOD_ATTR_SYNC
                 *   @reasoncode        TARG_RC_ATTR_SYNC_TO_FSP_FAIL
                 *   @userdata1         return code from FSP attribute sync
                 *   @userdata2[0:31]   page count for this section
                 *   @userdata2[31:63]  section ID of for section being sync'd
                 *
                 *   @devdesc       The attribute synchronization code on the
                 *                  FSP side was unable to complete the sync
                 *                  operation successfully.
                 *
                 *   @custdesc      A problem occurred during the IPL of the
                 *                  system: Attributes were not fully
                 *                  syncronized between the host firmware and
                 *                  service processor.
                 *
                 */
                 l_err = new ErrlEntry(ERRL_SEV_UNRECOVERABLE,
                                        TARG_MOD_ATTR_SYNC,
                                        TARG_RC_ATTR_SYNC_TO_FSP_FAIL,
                                        return_code,
                                        TWO_UINT32_TO_UINT64(
                                            iv_total_pages,iv_section_to_sync));
            }
        }

        // for a syncronous message we need to free the message
        msg_free( msg );

        return l_err;
    }
Example #2
0
    // send a request to FSP to sync to Hostboot
    errlHndl_t AttributeSync::sendSyncToHBRequestMessage()
    {
        TARG_INF( ENTER_MRK "AttributeSync::sendSyncToHBRequestMessage" );

        errlHndl_t l_err = NULL;

        // allocate message buffer
        // buffer will be initialized to zero by msg_allocate()
        msg_t * l_pMsg = msg_allocate();

        l_pMsg->type = ATTR_SYNC_REQUEST_TO_HB;

        ATTR_SYNC_ADD_SECTION_ID( iv_section_to_sync, l_pMsg->data[0] );

        l_err = sendMboxMessage( SYNCHRONOUS, l_pMsg );

        if( l_err == NULL )
        {
            // see if there was an error on the other end
            ATTR_SYNC_RC return_code = ATTR_SYNC_GET_RC( l_pMsg->data[0] );

            if ( return_code )
            {
                TARG_ERR(
                    "rc 0x%x received from FSP for Sync to HB request",
                    return_code );

                /*@
                 *   @errortype
                 *   @moduleid      TARG_MOD_ATTR_SYNC
                 *   @reasoncode    TARG_RC_ATTR_SYNC_REQUEST_TO_HB_FAIL
                 *   @userdata1     return code from FSP
                 *   @userdata2     section to sync
                 *   @devdesc       The attribute synchronization code on the
                 *                  FSP side was unable to fulfill the sync to
                 *                  HostBoot request.
                 */
                 l_err = new ErrlEntry(ERRL_SEV_UNRECOVERABLE,
                                       TARG_MOD_ATTR_SYNC,
                                       TARG_RC_ATTR_SYNC_REQUEST_TO_HB_FAIL,
                                       return_code,
                                       iv_section_to_sync);
            }
        }
        else
        {
            TARG_ERR(
                "Failed to send request to FSP to sync section type %u "
                "to Hostboot.", iv_section_to_sync );
        }

        // for a syncronous message we need to free the message
        msg_free( l_pMsg );
        l_pMsg = NULL;

        TARG_INF( EXIT_MRK "AttributeSync::sendSyncToHBRequestMessage" );
        return l_err;
    }
Example #3
0
 Message::Message(MessageType i_type, size_t i_len,
                  uint8_t* i_data, MessageMode i_mode):
     iv_msg(msg_allocate()),
     iv_errl(NULL),
     iv_len(i_len),
     iv_mode(i_mode),
     iv_data(i_data)
 {
     iv_msg->type = i_type;
     iv_msg->extra_data = static_cast<void*>(this);
 }
Example #4
0
    // send the sync complete message
    errlHndl_t AttributeSync::sendSyncCompleteMessage( )
    {
        TRACFCOMP(g_trac_targeting, "sending sync complete message");

        errlHndl_t l_err = NULL;

        msg_t * msg = msg_allocate();

        // initialize msg buffer
        memset( msg, 0, sizeof(msg_t) );

        msg->type = ATTR_SYNC_COMPLETE_TO_FSP;

        ATTR_SYNC_ADD_PAGE_COUNT( iv_total_pages, msg->data[0] );

        l_err = sendMboxMessage( SYNCHRONOUS, msg );

        if( l_err == NULL )
        {
            // see if there was an error on the other end
            ATTR_SYNC_RC return_code = ATTR_SYNC_GET_RC( msg->data[0] );

            if ( return_code )
            {
                TRACFCOMP(g_trac_targeting, "return code: 0x%x", return_code );

                /*@
                 *   @errortype
                 *   @moduleid      TARG_MOD_ATTR_SYNC
                 *   @reasoncode    TARG_RC_ATTR_SYNC_TO_FSP_FAIL
                 *   @userdata1     return code from FSP attribute sync
                 *   @userdata2     section ID of for section being sync'd
                 *
                 *   @devdesc       The Attribute synchronization code on the
                 *                  FSP side was unable to complete the sync
                 *                  operation successfully.
                 */
                 l_err = new ErrlEntry(ERRL_SEV_UNRECOVERABLE,
                                        TARG_MOD_ATTR_SYNC,
                                        TARG_RC_ATTR_SYNC_TO_FSP_FAIL,
                                        return_code,
                                        (uint64_t)iv_section_to_sync);
            }
        }

        // for a syncronous message we need to free the message
        msg_free( msg );

        return l_err;
    }
Example #5
0
void sendESEL(uint8_t* i_eselData, uint32_t i_dataSize,
              uint32_t i_eid,
              uint8_t i_eventDirType, uint8_t i_eventOffset,
              uint8_t i_sensorType, uint8_t i_sensorNumber )
{
    IPMI_TRAC(ENTER_MRK "sendESEL()");

#ifdef __HOSTBOOT_RUNTIME
    // HBRT doesn't send a msg, but use the msg structure to pass the data
    msg_t l_msg;
    msg_t *msg = &l_msg;
    memset(msg, 0, sizeof(msg_t));
#else
    msg_t *msg = msg_allocate();
#endif
    msg->type = MSG_SEND_ESEL;
    msg->data[0] = i_eid;

    // create the sel record of information
    selRecord l_sel;
    l_sel.record_type = record_type_system_event;
    l_sel.generator_id = generator_id_ami;
    l_sel.evm_format_version = format_ipmi_version_2_0;
    l_sel.sensor_type = i_sensorType;
    l_sel.sensor_number = i_sensorNumber;
    l_sel.event_dir_type = i_eventDirType;
    l_sel.event_data1 = i_eventOffset;

    eselInitData *eselData =
        new eselInitData(&l_sel, i_eselData, i_dataSize);

    msg->extra_data = eselData;

#ifdef __HOSTBOOT_RUNTIME
    process_esel(msg);
#else
    // one message queue to the SEL thread
    static msg_q_t mq = Singleton<IpmiSEL>::instance().msgQueue();

    //Send the msg to the sel thread
    int rc = msg_send(mq,msg);
    if(rc)
    {
        IPMI_TRAC(ERR_MRK "Failed (rc=%d) to send message",rc);
        delete eselData;
    }
#endif
    IPMI_TRAC(EXIT_MRK "sendESEL");
    return;
} // sendESEL
Example #6
0
///////////////////////////////////////////////////////////////////////////////
// ErrlManager::sendErrLogToFSP()
///////////////////////////////////////////////////////////////////////////////
void ErrlManager::sendErrLogToFSP ( errlHndl_t& io_err )
{
    msg_t *msg = NULL;

    TRACFCOMP( g_trac_errl, ENTER_MRK"ErrlManager::sendErrLogToFSP" );
    do
    {
        //Create a mailbox message to send to FSP
        msg = msg_allocate();
        msg->type = ERRLOG_SEND_TO_FSP_TYPE;

        uint32_t l_msgSize = io_err->flattenedSize();

        //Data[0] will be hostboot error log ID so Hostboot can
        //keep track of the error log when FSP responses back.

        msg->data[0] = io_err->eid();
        msg->data[1] = l_msgSize;

        void * temp_buff = MBOX::allocate( l_msgSize );

        io_err->flatten ( temp_buff, l_msgSize );
        msg->extra_data = temp_buff;

        TRACDCOMP( g_trac_errl, INFO_MRK"Send msg to FSP for errlogId %.8x",
                                                               io_err->eid() );
        errlHndl_t l_err = MBOX::send( MBOX::FSP_ERROR_MSGQ, msg );
        if( !l_err )
        {
            // clear this - we're done with the message;
            // the receiver will free the storage when it's done
            msg = NULL;
        }
        else
        {
           TRACFCOMP(g_trac_errl, ERR_MRK"Failed sending error log to FSP");

           //Free the extra data due to the error
           MBOX::deallocate( msg->extra_data );
           msg_free( msg );
           msg = NULL;

           delete l_err;
           l_err = NULL;
        }
    } while (0);

    TRACFCOMP( g_trac_errl, EXIT_MRK"ErrlManager::sendErrLogToFSP" );
} // sendErrLogToFSP
Example #7
0
 ///
 /// @brief msg ctor
 /// @param[in] i_cmd, the network function & command
 /// @param[in] i_len, the length of the data
 /// @param[in] i_data, the data (new'd space)
 ///
 Message::Message(const command_t& i_cmd,
                  const uint8_t i_len,
                  uint8_t* i_data):
     iv_msg(msg_allocate()),
     iv_key(0),
     iv_len(i_len),
     iv_netfun(i_cmd.first),
     iv_seq(iv_key),
     iv_cmd(i_cmd.second),
     iv_cc(0),
     iv_state(0),
     iv_errl(NULL),
     iv_data(i_data)
 {
     iv_timeout.tv_sec = 0;
     iv_timeout.tv_nsec = 0;
 }
Example #8
0
errlHndl_t Service::stop()
{
    ATTN_SLOW("shutting down...");

    mutex_lock(&iv_mutex);

    tid_t intrTask = iv_intrTask;
    tid_t prdTask = iv_prdTask;

    msg_q_t q = iv_intrTaskQ;

    iv_intrTask = 0;
    iv_prdTask = 0;

    mutex_unlock(&iv_mutex);

    if(intrTask)
    {
        errlHndl_t err = configureInterrupts(q, DOWN);

        if(err)
        {
            errlCommit(err, ATTN_COMP_ID);
        }

        msg_t * shutdownMsg = msg_allocate();
        shutdownMsg->type = SHUTDOWN;

        msg_sendrecv(q, shutdownMsg);
        msg_free(shutdownMsg);

        task_wait_tid(intrTask, 0, 0);

        msg_q_destroy(q);
    }

    if(prdTask)
    {
        sync_cond_signal(&iv_cond);
        task_wait_tid(prdTask, 0, 0);
    }

    ATTN_SLOW("..shutdown complete");

    return 0;
}
Example #9
0
void ErrlManager::sendResourcesMsg(errlManagerNeeds i_needs)
{
    TRACFCOMP( g_trac_errl, ENTER_MRK"ErrlManager::sendResourcesMsg %d", i_needs);

    //Create a message to send to Host boot error message queue.
    msg_t *msg = msg_allocate();

    switch (i_needs)
    {
        case PNOR:
            msg->type = ERRORLOG::ErrlManager::ERRLOG_ACCESS_PNOR_TYPE;
            break;
        case TARG:
            msg->type = ERRORLOG::ErrlManager::ERRLOG_ACCESS_TARG_TYPE;
            break;
        case MBOX:
            msg->type = ERRORLOG::ErrlManager::ERRLOG_ACCESS_MBOX_TYPE;
            break;
        case IPMI:
            msg->type = ERRORLOG::ErrlManager::ERRLOG_ACCESS_IPMI_TYPE;
            break;
        case ERRLDISP:
            msg->type = ERRORLOG::ErrlManager::ERRLOG_ACCESS_ERRLDISP_TYPE;
            break;
        default:
        {
            TRACFCOMP( g_trac_errl, ERR_MRK "bad msg!!");
            assert(0);
        }
    }

    //Send the msg asynchronously to error message queue to handle.
    int rc = msg_send ( ERRORLOG::ErrlManager::iv_msgQ, msg );

    //Return code is non-zero when the message queue is invalid
    //or the message type is invalid.
    if ( rc )
    {
        TRACFCOMP( g_trac_errl, ERR_MRK "Failed (rc=%d) to send %d message.", rc, i_needs);
    }
    return;
}
Example #10
0
    void Daemon::sendExtractBuffer(void* i_buffer, size_t i_size)
    {
        // Send buffer message.
        //    We don't need to check for mailbox attributes or readiness
        //    because we should only be sending this message if we were
        //    requested to by the SP.

        msg_t* msg = msg_allocate();
        msg->type = DaemonIf::TRACE_BUFFER;
        msg->data[1] = i_size;
        msg->extra_data = i_buffer;

        errlHndl_t l_errl = MBOX::send(MBOX::FSP_TRACE_MSGQ, msg);
        if (l_errl)
        {
            errlCommit(l_errl, TRACE_COMP_ID);
            MBOX::deallocate(i_buffer);
            msg_free(msg);
        }
    }
Example #11
0
///////////////////////////////////////////////////////////////////////////////
// ErrlManager::sendErrlogToMessageQueue()
///////////////////////////////////////////////////////////////////////////////
void ErrlManager::sendErrlogToMessageQueue ( errlHndl_t& io_err,
                                             compId_t i_committerComp )
{
    msg_t  *  msg     = NULL;

    TRACFCOMP( g_trac_errl, ENTER_MRK"ErrlManager::sendErrlogToMessageQueue" );

    do
    {
        //Create a message to send to Host boot error message queue.
        msg = msg_allocate();

        msg->type = ERRLOG_NEEDS_TO_BE_COMMITTED_TYPE;

        //Pass along the component id in the message
        msg->data[0] = i_committerComp;

        //Pass along the error log handle in the message
        msg->data[1] = 8;
        msg->extra_data = io_err;

        TRACFCOMP( g_trac_errl, INFO_MRK"Send an error log to message queue"
                                " to commit. eid=%.8X", io_err->eid() );

        //Send the error log to error message queue to handle.
        //Message is sent as asynchronous.
        int rc = msg_send ( iv_msgQ, msg );

        //Return code is non-zero when the message queue is invalid
        //or the message type is invalid.
        if ( rc )
        {
            TRACFCOMP( g_trac_errl, ERR_MRK "Failed to send mailbox message"
                       "to message queue. eid=%.8X", io_err->eid() );
            break;
        }

    } while (0);
    TRACFCOMP( g_trac_errl, EXIT_MRK"ErrlManager::sendErrlogToMessageQueue" );
    return;
} // sendErrlogToMessageQueue
Example #12
0
void ErrlManager::sendAckErrorlog(uint32_t i_eid)
{
    TRACFCOMP( g_trac_errl, ENTER_MRK"ErrlManager::sendAddErrorlog 0x%.8X",
            i_eid);

    //Create a message to send to Host boot error message queue.
    msg_t *msg = msg_allocate();
    msg->type = ERRLOG_COMMITTED_ACK_RESPONSE_TYPE;
    //Pass along the eid of the error, shifted up to the first word
    msg->data[0] = static_cast<uint64_t>(i_eid) << 32;

    //Send the msg asynchronously to error message queue to handle.
    int rc = msg_send ( ERRORLOG::ErrlManager::iv_msgQ, msg );

    //Return code is non-zero when the message queue is invalid
    //or the message type is invalid.
    if ( rc )
    {
        TRACFCOMP( g_trac_errl, ERR_MRK "Failed (rc=%d) to send ack 0x%.8X message.",
                rc, i_eid);
    }
    return;
}
Example #13
0
// ------------------------------------------------------------------
// sendMboxWriteMsg
// ------------------------------------------------------------------
errlHndl_t sendMboxWriteMsg ( size_t i_numBytes,
                              void * i_data,
                              TARGETING::Target * i_target,
                              VPD_MSG_TYPE i_type,
                              VpdWriteMsg_t& i_record )
{
    errlHndl_t l_err = NULL;
    msg_t* msg = NULL;

    TRACSSCOMP( g_trac_vpd,
                ENTER_MRK"sendMboxWriteMsg()" );

    do
    {
        //Create a mailbox message to send to FSP
        msg = msg_allocate();
        msg->type = i_type;
        msg->data[0] = i_record.data0;
        msg->data[1] = i_numBytes;

        //Copy the data into the message
        msg->extra_data = malloc( i_numBytes );
        memcpy( msg->extra_data, i_data, i_numBytes );

        TRACFCOMP( g_trac_vpd,
                   INFO_MRK"sendMboxWriteMsg: Send msg to FSP to write VPD type %.8X, record %d, offset 0x%X",
                   i_type,
                   i_record.rec_num,
                   i_record.offset );

        //We only send VPD update when we have SP Base Services
        if( !INITSERVICE::spBaseServicesEnabled() )
        {
            TRACFCOMP(g_trac_vpd, INFO_MRK "No SP Base Services, skipping VPD write");
            TRACFBIN( g_trac_vpd, "msg=", msg, sizeof(msg_t) );
            TRACFBIN( g_trac_vpd, "extra=", msg->extra_data, i_numBytes );
            free (msg->extra_data);
            msg_free( msg );

            break;
        }

        l_err = MBOX::send( MBOX::FSP_VPD_MSGQ, msg );
        if( l_err )
        {
            TRACFCOMP(g_trac_vpd,
                      ERR_MRK "Failed sending VPD to FSP for %.8X",
                      TARGETING::get_huid(i_target));
            ERRORLOG::ErrlUserDetailsTarget(i_target).addToLog(l_err);

            l_err->collectTrace("VPD",1024);
            if( VPD_WRITE_DIMM == i_type )
            {
                l_err->collectTrace("SPD",1024);
            }

            // just commit the log and move on, nothing else to do
            errlCommit( l_err, VPD_COMP_ID );
            l_err = NULL;

            free( msg->extra_data );
            msg->extra_data = NULL;
            msg_free( msg );
        }
    } while( 0 );

    TRACSSCOMP( g_trac_vpd,
                EXIT_MRK"sendMboxWriteMsg()" );

    return l_err;
}
Example #14
0
enum fsm_event e2e_event(struct port *p, int fd_index)
{
	int cnt, fd = p->fda.fd[fd_index];
	enum fsm_event event = EV_NONE;
	struct ptp_message *msg, *dup;

	switch (fd_index) {
	case FD_ANNOUNCE_TIMER:
	case FD_SYNC_RX_TIMER:
		pr_debug("port %hu: %s timeout", portnum(p),
			 fd_index == FD_SYNC_RX_TIMER ? "rx sync" : "announce");
		if (p->best) {
			fc_clear(p->best);
		}
		port_set_announce_tmo(p);
		return EV_ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES;

	case FD_DELAY_TIMER:
		pr_debug("port %hu: delay timeout", portnum(p));
		port_set_delay_tmo(p);
		delay_req_prune(p);
		tc_prune(p);
		if (!clock_free_running(p->clock)) {
			switch (p->state) {
			case PS_UNCALIBRATED:
			case PS_SLAVE:
				if (port_delay_request(p)) {
					event = EV_FAULT_DETECTED;
				}
				break;
			default:
				break;
			};
		}
		return event;

	case FD_QUALIFICATION_TIMER:
		pr_debug("port %hu: qualification timeout", portnum(p));
		return EV_QUALIFICATION_TIMEOUT_EXPIRES;

	case FD_MANNO_TIMER:
	case FD_SYNC_TX_TIMER:
	case FD_UNICAST_REQ_TIMER:
	case FD_UNICAST_SRV_TIMER:
		pr_err("unexpected timer expiration");
		return EV_NONE;

	case FD_RTNL:
		pr_debug("port %hu: received link status notification", portnum(p));
		rtnl_link_status(fd, p->name, port_link_status, p);
		if (p->link_status == (LINK_UP|LINK_STATE_CHANGED)) {
			return EV_FAULT_CLEARED;
		} else if ((p->link_status == (LINK_DOWN|LINK_STATE_CHANGED)) ||
			   (p->link_status & TS_LABEL_CHANGED)) {
			return EV_FAULT_DETECTED;
		} else {
			return EV_NONE;
		}
	}

	msg = msg_allocate();
	if (!msg) {
		return EV_FAULT_DETECTED;
	}
	msg->hwts.type = p->timestamping;

	cnt = transport_recv(p->trp, fd, msg);
	if (cnt <= 0) {
		pr_err("port %hu: recv message failed", portnum(p));
		msg_put(msg);
		return EV_FAULT_DETECTED;
	}
	if (msg_sots_valid(msg)) {
		ts_add(&msg->hwts.ts, -p->rx_timestamp_offset);
	}
	if (msg_unicast(msg)) {
		pl_warning(600, "cannot handle unicast messages!");
		msg_put(msg);
		return EV_NONE;
	}

	dup = msg_duplicate(msg, cnt);
	if (!dup) {
		msg_put(msg);
		return EV_NONE;
	}
	if (tc_ignore(p, dup)) {
		msg_put(dup);
		dup = NULL;
	}

	switch (msg_type(msg)) {
	case SYNC:
		if (tc_fwd_sync(p, msg)) {
			event = EV_FAULT_DETECTED;
			break;
		}
		if (dup) {
			process_sync(p, dup);
		}
		break;
	case DELAY_REQ:
		if (tc_fwd_request(p, msg)) {
			event = EV_FAULT_DETECTED;
		}
		break;
	case PDELAY_REQ:
		break;
	case PDELAY_RESP:
		break;
	case FOLLOW_UP:
		if (tc_fwd_folup(p, msg)) {
			event = EV_FAULT_DETECTED;
			break;
		}
		if (dup) {
			process_follow_up(p, dup);
		}
		break;
	case DELAY_RESP:
		if (tc_fwd_response(p, msg)) {
			event = EV_FAULT_DETECTED;
		}
		if (dup) {
			process_delay_resp(p, dup);
		}
		break;
	case PDELAY_RESP_FOLLOW_UP:
		break;
	case ANNOUNCE:
		if (tc_forward(p, msg)) {
			event = EV_FAULT_DETECTED;
			break;
		}
		if (dup && process_announce(p, dup)) {
			event = EV_STATE_DECISION_EVENT;
		}
		break;
	case SIGNALING:
	case MANAGEMENT:
		if (tc_forward(p, msg)) {
			event = EV_FAULT_DETECTED;
		}
		break;
	}

	msg_put(msg);
	if (dup) {
		msg_put(dup);
	}
	return event;
}
Example #15
0
    void Daemon::sendContBuffer(void* i_buffer, size_t i_size)
    {
        // Write debug structure with buffer information.
        g_debugSettings.bufferSize = i_size;
        g_debugSettings.bufferPage = i_buffer;

        // Signal for simics.
        asm volatile("mr 4, %0; mr 5, %1" ::
                     "r" (i_buffer), "r" (i_size) : "4", "5");
        MAGIC_INSTRUCTION(MAGIC_CONTINUOUS_TRACE);

        TARGETING::Target* sys = NULL;
        TARGETING::targetService().getTopLevelTarget(sys);

        TARGETING::HbSettings hbSettings =
            sys->getAttr<TARGETING::ATTR_HB_SETTINGS>();

        // Determine if continuous trace is currently enabled.
        bool contEnabled = hbSettings.traceContinuous;
        if (g_debugSettings.contTraceOverride !=
                DebugSettings::CONT_TRACE_USE_ATTR)
        {
            contEnabled = (g_debugSettings.contTraceOverride >=
                            DebugSettings::CONT_TRACE_FORCE_ENABLE);
        }

        if(contEnabled)
        {
            //Only send via debugComm if tool has explicitly enabled
            //otherwise this will "hang" hostboot while it waits for the tool
            if(g_debugSettings.contTraceOverride ==
                            DebugSettings::CONT_TRACE_FORCE_ENABLE_DEBUG_COMM)
            {
                // Write scratch register indicating is available.
                uint64_t l_addr = reinterpret_cast<uint64_t>(i_buffer);
                Util::writeDebugCommRegs(Util::MSG_TYPE_TRACE,
                                         l_addr,
                                         i_size);
            }

            //Always attempt to send to FSP if enabled
            if (MBOX::mailbox_enabled())
            {
                msg_t* msg = msg_allocate();
                msg->type = DaemonIf::TRACE_CONT_TRACE_BUFFER;
                msg->data[1] = i_size;
                msg->extra_data = MBOX::allocate(i_size);
                memcpy(msg->extra_data,i_buffer,i_size);

                errlHndl_t l_errl = MBOX::send(MBOX::FSP_TRACE_MSGQ, msg);
                if (l_errl)
                {
                    errlCommit(l_errl, TRACE_COMP_ID);
                    msg_free(msg);
                }
            }
        }

        //Always free the buf
        free(i_buffer);
    }
Example #16
0
    errlHndl_t AttributeSync::syncSectionToFsp(
                                    TARGETING::SECTION_TYPE i_section_to_sync )
    {
        errlHndl_t l_errl   = NULL;
        msg_t   *  msg      = NULL;

        iv_section_to_sync = i_section_to_sync;


        do{

            // set up the pointers to the data area
            getSectionData();

            for( iv_current_page = 0;
                    iv_current_page < iv_total_pages; iv_current_page++ )
            {
                msg = msg_allocate();

                msg->type = ATTR_SYNC_SECTION_TO_FSP;

                msg->data[0] = 0;

                ATTR_SYNC_ADD_SECTION_ID( iv_section_to_sync, msg->data[0] );

                ATTR_SYNC_ADD_PAGE_NUMBER( iv_current_page, msg->data[0] );

                // set the 2nd data word to the buffer size
                msg->data[1] = PAGESIZE;

                // allocated storage will always be 4k
                msg->extra_data = MBOX::allocate( PAGESIZE );

                // copy the attributes from mem to our buffer.
                memcpy( msg->extra_data,
                        iv_pages[iv_current_page].dataPtr, PAGESIZE );

                TARG_INF("syncSectionToFsp()  - copy %d bytes from %p to %p",
                        PAGESIZE, iv_pages[iv_current_page].dataPtr,
                        msg->extra_data);

                // mailbox code will free both the msg and the extra data
                // we allocated above for an async message.
                l_errl = sendMboxMessage( ASYNCHRONOUS, msg );

                if( l_errl )
                {
                    TARG_ERR("failed sending sync message");
                    break;
                }

            }

            if(( l_errl == NULL ) && ( iv_total_pages != 0 ))
            {
                // tell fsp to commit the last section of data we sent
                l_errl =  sendSyncCompleteMessage();

                if( l_errl )
                {
                    TARG_ERR("failed sending sync complete message");
                }
            }

        }while(0);

        return l_errl;

    }
Example #17
0
    void Daemon::sendContBuffer(void* i_buffer, size_t i_size)
    {
        // Write debug structure with buffer information.
        g_debugSettings.bufferSize = i_size;
        g_debugSettings.bufferPage = i_buffer;
        // Write scratch register indicating continuous trace is available.
        writeScratchReg(1ull << 32);

        // Signal for simics.
        asm volatile("mr 4, %0; mr 5, %1" ::
                     "r" (i_buffer), "r" (i_size) : "4", "5");
        MAGIC_INSTRUCTION(MAGIC_CONTINUOUS_TRACE);

        TARGETING::Target* sys = NULL;
        TARGETING::targetService().getTopLevelTarget(sys);

        TARGETING::HbSettings hbSettings =
            sys->getAttr<TARGETING::ATTR_HB_SETTINGS>();

        // Determine if continuous trace is currently enabled.
        bool contEnabled = hbSettings.traceContinuous;
        if (g_debugSettings.contTraceOverride !=
                DebugSettings::CONT_TRACE_USE_ATTR)
        {
            contEnabled = (g_debugSettings.contTraceOverride ==
                            DebugSettings::CONT_TRACE_FORCE_ENABLE);
        }

        if (!contEnabled)
        {
            // Trace isn't enabled so just discard the buffer.
            free(i_buffer);
        }
        else
        {
            if (MBOX::mailbox_enabled())
            {
                msg_t* msg = msg_allocate();
                msg->type = DaemonIf::TRACE_CONT_TRACE_BUFFER;
                msg->data[1] = i_size;
                msg->extra_data = MBOX::allocate(i_size);
                memcpy(msg->extra_data,i_buffer,i_size);
                free(i_buffer);

                errlHndl_t l_errl = MBOX::send(MBOX::FSP_TRACE_MSGQ, msg);
                if (l_errl)
                {
                    errlCommit(l_errl, TRACE_COMP_ID);
                    msg_free(msg);
                }
            }
            else
            {
                // Wait for tools to extract the buffer.
                while(0 != readScratchReg())
                {
                    task_yield();
                }
                free(i_buffer);
            }
        }
    }