Atom ScriptObject::getAtomPropertyFromProtoChain(Atom name, ScriptObject* o, Traits *origObjTraits) const
{
// todo will delegate always be non-null here?
if (o != NULL)
{
Atom searchname = name;
Stringp s = core()->atomToString(name);
AvmAssert(s->isInterned());
Atom ival = s->getIntAtom();
if (ival)
{
searchname = ival;
}
do
{
// ensure prototype is dynamic
if (!o->vtable->traits->getHashtableOffset())
continue;
Atom const value = o->getTable()->getNonEmpty(searchname);
if (!InlineHashtable::isEmpty(value))
return value;
}
while ((o = o->delegate) != NULL);
}
// NOTE use default public since name is not used
Multiname multiname(core()->getAnyPublicNamespace(), AvmCore::atomToString(name));
toplevel()->throwReferenceError(kReadSealedError, &multiname, origObjTraits);
// unreached
return undefinedAtom;
}
void
get_eigen_outfile_name(char *in_name, int j, int k)
{
char prefix[MAX_FNL];
char suffix[MAX_FNL];
char new_name[MAX_FNL];
char mode_string[MAX_FNL];
char wave_string[MAX_FNL];
int i;
int suffix_length;
int prefix_length;
/* Initialize string pieces */
for ( i=0; i<MAX_FNL; i++)
{
prefix[i] = '\0';
suffix[i] = '\0';
new_name[i] = '\0';
mode_string[i] = '\0';
wave_string[i] = '\0';
}
/* Save beginning and end of specified file name */
suffix_length = get_suffix(suffix, in_name);
prefix_length = get_prefix(prefix, in_name);
/* Determine if doing 3D of 2D LSA; set k = -1 if not */
if ( !(Linear_Stability == LSA_3D_OF_2D)
&& !(Linear_Stability == LSA_3D_OF_2D_SAVE)) k = -1;
/* Always construct mode string */
sprintf(mode_string, "_mode%d", j);
/* Construct wave string for 3D of 2D LSA only */
if (k != -1) sprintf(wave_string, "_wn=%g", LSA_wave_numbers[k]);
/* Assemble the pieces of the name string */
if (prefix_length > 0) strcpy(new_name, prefix);
strcat(new_name, mode_string);
if (k != -1) strcat(new_name, wave_string);
if (suffix_length > 0) strcat(new_name, suffix);
/* Multiname for this processor if parallel */
if (Num_Proc > 1) multiname(new_name, ProcID, Num_Proc);
/* Return the name as in_name */
strcpy(in_name, new_name);
return;
}
void ObjectClass::_setPropertyIsEnumerable(Atom thisAtom, Stringp name, bool enumerable)
{
AvmCore* core = this->core();
name = name ? core->internString(name) : (Stringp)core->knull;
if ((thisAtom&7) == kObjectType)
{
ScriptObject* obj = AvmCore::atomToScriptObject(thisAtom);
obj->setStringPropertyIsEnumerable(name, enumerable);
}
else
{
// cannot create properties on a sealed object.
Multiname multiname(core->publicNamespace, name);
toplevel()->throwReferenceError(kWriteSealedError, &multiname, traits());
}
}
ClassClosure* DomainObject::getClass(Stringp name)
{
AvmCore *core = this->core();
if (name == NULL) {
toplevel()->throwArgumentError(kNullArgumentError, core->toErrorString("name"));
}
// Search for a dot from the end.
int dot = name->lastIndexOf(core->cachedChars[(int)'.']);
// If there is a '.', this is a fully-qualified
// class name in a package. Must turn it into
// a namespace-qualified multiname.
Namespace* ns;
Stringp className;
if (dot >= 0) {
Stringp uri = core->internString(name->substring(0, dot));
ns = core->internNamespace(core->newNamespace(uri));
className = core->internString(name->substring(dot+1, name->length()));
} else {
ns = core->publicNamespace;
className = core->internString(name);
}
Multiname multiname(ns, className);
// OOO: In the distribution, we search core->codeContext()->domainEnv rather than
// our own domainEnv, which is surely a bug?
ScriptObject *container = finddef(multiname, domainEnv);
if (!container) {
toplevel()->throwTypeError(kClassNotFoundError, core->toErrorString(&multiname));
}
Atom atom = toplevel()->getproperty(container->atom(),
&multiname,
container->vtable);
if (!AvmCore::istype(atom, core->traits.class_itraits)) {
toplevel()->throwTypeError(kClassNotFoundError, core->toErrorString(&multiname));
}
return (ClassClosure*)AvmCore::atomToScriptObject(atom);
}
void ObjectClass::_setPropertyIsEnumerable(Atom thisAtom, Stringp name, bool enumerable)
{
AvmCore* core = this->core();
name = name ? core->internString(name) : (Stringp)core->knull;
if (atomKind(thisAtom) == kObjectType)
{
ScriptObject* obj = AvmCore::atomToScriptObject(thisAtom);
obj->setStringPropertyIsEnumerable(name, enumerable);
}
else
{
// cannot create properties on a sealed object.
// NOTE just use the unmarked version
Multiname multiname(core->getAnyPublicNamespace(), name);
// NOTE use default public
toplevel()->throwReferenceError(kWriteSealedError, &multiname, traits());
}
}
int
main(int argc, char **argv)
/*
* Initial main driver for GOMA. Derived from a (1/93) release of
* the rf_salsa program by
*
* Original Authors: John Shadid (1421)
* Scott Hutchinson (1421)
* Harry Moffat (1421)
*
* Date: 12/3/92
*
*
* Updates and Changes by:
* Randy Schunk (9111)
* P. A. Sackinger (9111)
* R. R. Rao (9111)
* R. A. Cairncross (Univ. of Delaware)
* Dates: 2/93 - 6/96
*
* Modified for continuation
* Ian Gates
* Dates: 2/98 - 10/98
* Dates: 7/99 - 8/99
*
* Last modified: Wed June 26 14:21:35 MST 1994 [email protected]
* Hello.
*
* Note: Many modifications from an early 2/93 pre-release
* version of rf_salsa were made by various persons
* in order to test ideas about moving/deforming meshes...
*/
{
/* Local Declarations */
double time_start, total_time; /* timing variables */
#ifndef PARALLEL
/* struct tm *tm_ptr; additional serial timing variables */
time_t now;
#endif
int error;
int i;
int j;
char **ptmp;
char *yo;
struct Command_line_command **clc=NULL; /* point to command line structure */
int nclc = 0; /* number of command line commands */
/********************** BEGIN EXECUTION ***************************************/
#ifdef FP_EXCEPT
feenableexcept ((FE_OVERFLOW | FE_DIVBYZERO | FE_INVALID));
#endif
/* assume number of commands is less than or equal to the number of
* arguments in the command line minus 1 (1st is program name) */
/*
* Get the name of the executable, yo
*/
yo = argv[0];
#ifdef PARALLEL
MPI_Init(&argc, &argv);
time_start = MPI_Wtime();
#endif /* PARALLEL */
#ifndef PARALLEL
(void)time(&now);
time_start = (double)now;
#endif /* PARALLEL */
time_goma_started = time_start;
Argv = argv;
Argc = argc;
#ifdef PARALLEL
/*
* Determine the parallel processing status, if any. We need to know
* pretty early if we're "one of many" or the only process.
*/
error = MPI_Comm_size(MPI_COMM_WORLD, &Num_Proc);
error = MPI_Comm_rank(MPI_COMM_WORLD, &ProcID);
/*
* Setup a default Proc_config so we can use utility routines
* from Aztec
*/
AZ_set_proc_config(Proc_Config, MPI_COMM_WORLD);
/* set the output limit flag if need be */
if( Num_Proc > DP_PROC_PRINT_LIMIT ) Unlimited_Output = FALSE;
#ifdef HAVE_MPE_H
error = MPE_Init_log();
#endif /* HAVE_MPE_H */
Dim = 0; /* for any hypercube legacy code... */
#endif /* PARALLEL */
#ifndef PARALLEL
Dim = 0;
ProcID = 0;
Num_Proc = 1;
#endif /* PARALLEL */
/*
* HKM - Change the ieee exception handling based on the machine and
* the level of debugging/speed desired. This call currently causes
* core dumps for floating point exceptions.
*/
handle_ieee();
log_msg("--------------");
log_msg("GOMA begins...");
/*
* Some initial stuff that only the master process does.
*/
if ( ProcID == 0 )
{
if (argc > 1)
{
log_msg("Preprocessing command line options.");
clc = (struct Command_line_command **)
smalloc( argc * sizeof(struct Command_line_command *));
for (i=0; i<argc; i++)
{
clc[i] = (struct Command_line_command *)
smalloc(sizeof(struct Command_line_command));
clc[i]->type = 0; /* initialize command line structure */
clc[i]->i_val = 0;
clc[i]->r_val = 0.;
clc[i]->string = (char *)
smalloc(MAX_COMMAND_LINE_LENGTH*sizeof(char));
for ( j=0; j<MAX_COMMAND_LINE_LENGTH; j++)
{
clc[i]->string[j] = '\0';
}
#ifdef DEBUG
fprintf(stderr, "clc[%d]->string is at 0x%x\n", i, clc[i]->string);
fprintf(stderr, "clc[%d] is at 0x%x\n", i, clc[i]);
#endif
}
}
strcpy(Input_File, "input");
strcpy(Echo_Input_File , "echo_input");
if (argc > 1) translate_command_line(argc, argv, clc, &nclc);
ECHO("OPEN", Echo_Input_File);
echo_command_line( argc, argv, Echo_Input_File );
print_code_version();
ptmp = legal_notice;
while ( strcmp(*ptmp, LAST_LEGAL_STRING) != 0 )
{
fprintf(stderr, "%s", *ptmp++);
}
}
/*
* Allocate the uniform problem description structure and
* the problem description structures on all processors
*/
error = pd_alloc();
EH(error, "pd_alloc problem");
#ifdef DEBUG
fprintf(stderr, "P_%d at barrier after pd_alloc\n", ProcID);
#ifdef PARALLEL
error = MPI_Barrier(MPI_COMM_WORLD);
#endif
#endif
log_msg("Allocating mp, gn, ...");
error = mp_alloc();
EH(error, "mp_alloc problem");
error = gn_alloc();
EH(error, "gn_alloc problem");
error = ve_alloc();
EH(error, "ve_alloc problem");
error = elc_alloc();
EH(error, "elc_alloc problem");
error = elc_rs_alloc();
EH(error, "elc_alloc problem");
error = cr_alloc();
EH(error, "cr_alloc problem");
error = evp_alloc();
EH(error, "evp_alloc problem");
error = tran_alloc();
EH(error, "tran_alloc problem");
error = eigen_alloc();
EH(error, "eigen_alloc problem");
error = cont_alloc();
EH(error, "cont_alloc problem");
error = loca_alloc();
EH(error, "loca_alloc problem");
error = efv_alloc();
EH(error, "efv_alloc problem");
#ifdef DEBUG
fprintf(stderr, "P_%d at barrier before read_input_file()\n", ProcID);
#ifdef PARALLEL
error = MPI_Barrier(MPI_COMM_WORLD);
#endif
#endif
/*
* Read ASCII input file, data files, related exodusII FEM databases.
*/
if ( ProcID == 0 )
{
log_msg("Reading input file ...");
read_input_file(clc, nclc); /* Read ascii input file get file names */
/* update inputed data to account for command line arguments that
* might override the input deck...
*/
log_msg("Overriding any input file specs w/ any command line specs...");
if (argc > 1) apply_command_line(clc, nclc);
#ifdef DEBUG
DPRINTF(stderr, "apply_command_line() is done.\n");
#endif
}
/*
* The user-defined material properties, etc. available to goma users
* mean that some dynamically allocated data needs to be communicated.
*
* To handle this, sizing information from the input file scan is
* broadcast in stages so that the other processors can allocate space
* accordingly to hold the data.
*
* Note: instead of handpacking a data structure, use MPI derived datatypes
* to gather and scatter. Pray this is done efficiently. Certainly it costs
* less from a memory standpoint.
*/
#ifdef PARALLEL
/*
* Make sure the input file was successully processed before moving on
*/
check_parallel_error("Input file error");
/*
* This is some sizing information that helps fit a little bit more
* onto the ark later on.
*/
#ifdef DEBUG
fprintf(stderr, "P_%d at barrier before noahs_raven()\n", ProcID);
error = MPI_Barrier(MPI_COMM_WORLD);
#endif
noahs_raven();
#ifdef DEBUG
fprintf(stderr, "P_%d at barrier before MPI_Bcast of Noahs_Raven\n", ProcID);
error = MPI_Barrier(MPI_COMM_WORLD);
#endif
MPI_Bcast(MPI_BOTTOM, 1, Noahs_Raven->new_type, 0, MPI_COMM_WORLD);
#ifdef DEBUG
fprintf(stderr, "P_%d at barrier after Bcast/before raven_landing()\n",
ProcID);
error = MPI_Barrier(MPI_COMM_WORLD);
#endif
/*
* Get the other processors ready to handle ark data.
*/
raven_landing();
#ifdef DEBUG
fprintf(stderr, "P_%d at barrier before noahs_ark()\n", ProcID);
error = MPI_Barrier(MPI_COMM_WORLD);
#endif
/*
* This is the main body of communicated information, including some
* whose sizes were determined because of advanced legwork by the raven.
*/
noahs_ark();
MPI_Bcast(MPI_BOTTOM, 1, Noahs_Ark->new_type, 0, MPI_COMM_WORLD);
/*
* Chemkin was initialized on processor zero during the input file
* process. Now, distribute it to all processors
*/
#ifdef USE_CHEMKIN
if (Chemkin_Needed) {
chemkin_initialize_mp();
}
#endif
/*
* Once the ark has landed, there are additional things that will need to
* be sent by dove. Example: BC_Types[]->u-BC arrays.
*
*/
ark_landing();
noahs_dove();
MPI_Bcast(MPI_BOTTOM, 1, Noahs_Dove->new_type, 0, MPI_COMM_WORLD);
#endif /* End of ifdef PARALLEL */
/*
* We sent the packed line to all processors that contained geometry
* creation commands. Now we need to step through it and create
* geometry as we go (including possibly reading an ACIS .sat file).
*
*/
/* Check to see if BRK File option exists and if so check if file exits */
if (Brk_Flag == 1) {
check_for_brkfile(Brk_File);
}
check_parallel_error("Error encountered in check for brkfile");
/* Now break the exodus files */
if (Num_Proc > 1 && ProcID == 0 && Brk_Flag == 1) {
call_brk();
}
check_parallel_error("Error in brking exodus files");
MPI_Barrier(MPI_COMM_WORLD);
/*
* For parallel execution, assume the following variables will be changed
* to reflect the multiple file aspect of the problem.
*
* FEM file = file.exoII --> file_3of15.exoII
*
* Output EXODUS II file = out.exoII --> out_3of15.exoII
*
*/
/*
* Allocate space for structures holding the EXODUS II finite element
* database information and for the Distributed Processing information.
*
* These are mostly skeletons with pointers that get allocated in the
* rd_exoII and rd_dpi routines. Remember to free up those arrays first
* before freeing the major pointers.
*/
EXO_ptr = alloc_struct_1(Exo_DB, 1);
init_exo_struct(EXO_ptr);
DPI_ptr = alloc_struct_1(Dpi, 1);
init_dpi_struct(DPI_ptr);
log_msg("Reading mesh from EXODUS II file...");
error = read_mesh_exoII(EXO_ptr, DPI_ptr);
/*
* Missing files on any processor are detected at a lower level
* forcing a return to the higher level
* rd_exo --> rd_mesh --> main
* Shutdown now, if any of the exodus files weren't found
*/
if (error < 0) {
#ifdef PARALLEL
MPI_Finalize();
#endif
return(-1);
}
/*
* All of the MPI_Type_commit() calls called behind the scenes that build
* the dove, ark and raven really allocated memory. Let's free it up now that
* the initial information has been communicated.
*/
#ifdef PARALLEL
MPI_Type_free(&(Noahs_Raven->new_type));
MPI_Type_free(&(Noahs_Ark->new_type));
MPI_Type_free(&(Noahs_Dove->new_type));
#endif
/*
* Setup the rest of the Problem Description structure that depends on
* the mesh that was read in from the EXODUS II file...
*
* Note that memory allocation and some setup has already been performed
* in mm_input()...
*/
error = setup_pd();
EH( error, "Problem setting up Problem_Description.");
/*
* Let's check to see if we need the large elasto-plastic global tensors
* and allocate them if so
*/
error = evp_tensor_alloc(EXO_ptr);
EH( error, "Problems setting up evp tensors");
/*
* Now that we know about what kind of problem we're solving and the
* mesh information, let's allocate space for elemental assembly structures
*
*/
#ifdef DEBUG
DPRINTF(stderr, "About to assembly_alloc()...\n");
#endif
log_msg("Assembly allocation...");
error = assembly_alloc(EXO_ptr);
EH( error, "Problem from assembly_alloc");
if (Debug_Flag) {
DPRINTF(stderr, "%s: setting up EXODUS II output files...\n", yo);
}
/*
* These are not critical - just niceties. Also, they should not overburden
* your db with too much of this - they're capped verbiage compliant routines.
*/
add_qa_stamp(EXO_ptr);
add_info_stamp(EXO_ptr);
#ifdef DEBUG
fprintf(stderr, "added qa and info stamps\n");
#endif
/*
* If the output EXODUS II database file is different from the input
* file, then we'll need to replicate all the basic mesh information.
* But, remember that if we're parallel, that the output file names must
* be multiplexed first...
*/
if ( Num_Proc > 1 )
{
multiname(ExoFileOut, ProcID, Num_Proc);
multiname(Init_GuessFile, ProcID, Num_Proc);
if ( strcmp( Soln_OutFile, "" ) != 0 )
{
multiname(Soln_OutFile, ProcID, Num_Proc);
}
if( strcmp( ExoAuxFile, "" ) != 0 )
{
multiname(ExoAuxFile, ProcID, Num_Proc);
}
if( efv->Num_external_field != 0 )
{
for( i=0; i<efv->Num_external_field; i++ )
{
multiname(efv->file_nm[i], ProcID, Num_Proc);
}
}
}
/***********************************************************************/
/***********************************************************************/
/***********************************************************************/
/*
* Preprocess the exodus mesh
* -> Allocate pointers to structures containing element
* side bc info, First_Elem_Side_BC_Array, and
* element edge info, First_Elem_Edge_BC_Array.
* -> Determine Unique_Element_Types[] array
*/
#ifdef DEBUG
fprintf(stderr, "pre_process()...\n");
#endif
log_msg("Pre processing of mesh...");
#ifdef PARALLEL
error = MPI_Barrier(MPI_COMM_WORLD);
#endif
pre_process(EXO_ptr);
/***********************************************************************/
/***********************************************************************/
/***********************************************************************/
/*
* Load up a few key indeces in the bfd prototype basis function structures
* and make sure that each active eqn/vbl has a bf[v] that points to the
* right bfd[]...needs pre_process to find out the number of unique
* element types in the problem.
*/
#ifdef DEBUG
fprintf(stderr, "bf_init()...\n");
#endif
log_msg("Basis function initialization...");
error = bf_init(EXO_ptr);
EH( error, "Problem from bf_init");
/*
* check for parallel errors before continuing
*/
check_parallel_error("Error encountered in problem setup");
/***********************************************************************/
/***********************************************************************/
/***********************************************************************/
/*
* Allocate space for each communication exchange description.
*/
#ifdef PARALLEL
#ifdef DEBUG
fprintf(stderr, "P_%d: Parallel cx allocation\n", ProcID);
#endif
if (DPI_ptr->num_neighbors > 0) {
cx = alloc_struct_1(Comm_Ex, DPI_ptr->num_neighbors);
Request = alloc_struct_1(MPI_Request,
Num_Requests * DPI_ptr->num_neighbors);
Status = alloc_struct_1(MPI_Status,
Num_Requests * DPI_ptr->num_neighbors);
}
#endif
/***********************************************************************/
/***********************************************************************/
/***********************************************************************/
/*
* SET UP THE PROBLEM
*
* Setup node-based structures
* Finalise how boundary conditions are to be handled
* Determine what unknowns are at each owned node and then tell
* neighboring processors about your nodes
* Set up communications pattern for fast unknown updates between
* processors.
*/
(void) setup_problem(EXO_ptr, DPI_ptr);
/*
* check for parallel errors before continuing
*/
check_parallel_error("Error encountered in problem setup");
/***********************************************************************/
/***********************************************************************/
/***********************************************************************/
/*
* CREATE BRK_FILE IF ONE DOES NOT EXIST
*
* If no Brk_File exists but the option was configured in the input or
* optional command we create one now and exit from goma.
*/
if ( Brk_Flag == 2 ) {
write_brk_file(Brk_File, EXO_ptr);
exit(0);
}
/***********************************************************************/
/***********************************************************************/
/***********************************************************************/
/*
* WRITE OUT INITIAL INFO TO EXODUS FILE
*/
/*
* Only have to initialize the exodus file if we are using different
* files for the output versus the input mesh
*/
if (strcmp(ExoFile, ExoFileOut)) {
/*
* Temporarily we'll need to renumber the nodes and elements in the
* mesh to be 1-based. After writing, return to the 0 based indexing
* that is more convenient in C.
*/
#ifdef DEBUG
fprintf(stderr, "1-base; wr_mesh; 0-base\n");
#endif
one_base(EXO_ptr);
wr_mesh_exo(EXO_ptr, ExoFileOut, 0);
zero_base(EXO_ptr);
/*
* If running on a distributed computer, augment the plain finite
* element information of EXODUS with the description of how this
* piece fits into the global problem.
*/
if (Num_Proc > 1) {
#ifdef PARALLEL
#ifdef DEBUG
fprintf(stderr, "P_%d at barrier before wr_dpi()\n", ProcID);
fprintf(stderr, "P_%d ExoFileOut = \"%s\"\n", ProcID, ExoFileOut);
error = MPI_Barrier(MPI_COMM_WORLD);
#endif
#endif
wr_dpi(DPI_ptr, ExoFileOut, 0);
}
}
/***********************************************************************/
/***********************************************************************/
/***********************************************************************/
/*
* SOLVE THE PROBLEM
*/
if (Debug_Flag) {
switch (Continuation) {
case ALC_ZEROTH:
P0PRINTF("%s: continue_problem (zeroth order) ...\n", yo);
break;
case ALC_FIRST:
P0PRINTF("%s: continue_problem (first order) ...\n", yo);
break;
case HUN_ZEROTH:
P0PRINTF("%s: hunt_problem (zeroth order) ...\n", yo);
break;
case HUN_FIRST:
P0PRINTF("%s: hunt_problem (first order) ...\n", yo);
break;
case LOCA:
P0PRINTF("%s: do_loca ...\n", yo);
break;
default:
P0PRINTF("%s: solve_problem...\n", yo);
break;
}
}
#ifdef DEBUG
switch (Continuation) {
case ALC_ZEROTH:
DPRINTF(stderr, "%s: continue_problem (zeroth order) ...\n", yo);
break;
case ALC_FIRST:
DPRINTF(stderr, "%s: continue_problem (first order) ...\n", yo);
break;
case HUN_ZEROTH:
DPRINTF(stderr, "%s: hunt_problem (zeroth order) ...\n", yo);
break;
case HUN_FIRST:
DPRINTF(stderr, "%s: hunt_problem (first order) ...\n", yo);
break;
case LOCA:
DPRINTF(stderr, "%s: do_loca ...\n", yo);
break;
default:
DPRINTF(stderr, "%s: solve_problem...\n", yo);
break;
}
#endif
if( TimeIntegration == TRANSIENT)
{
Continuation = ALC_NONE;
if (Debug_Flag) {
P0PRINTF("%s: solve_problem...TRANSIENT superceded Continuation...\n", yo);
}
#ifdef DEBUG
DPRINTF(stderr, "%s: solve_problem...TRANSIENT superceded Continuation...\n", yo);
#endif
solve_problem(EXO_ptr, DPI_ptr, NULL);
}
switch (Continuation) {
case ALC_ZEROTH:
case ALC_FIRST:
log_msg("Solving continuation problem");
continue_problem(cx, EXO_ptr, DPI_ptr);
break;
case HUN_ZEROTH:
case HUN_FIRST:
log_msg("Solving hunt problem");
hunt_problem(cx, EXO_ptr, DPI_ptr);
break;
case LOCA:
log_msg("Solving continuation problem with LOCA");
error = do_loca(cx, EXO_ptr, DPI_ptr);
break;
default:
log_msg("Solving problem");
if (loca_in->Cont_Alg == LOCA_LSA_ONLY)
{
error = do_loca(cx, EXO_ptr, DPI_ptr);
}
else if(TimeIntegration != TRANSIENT)
{
solve_problem(EXO_ptr, DPI_ptr, NULL);
}
break;
}
#ifdef PARALLEL
MPI_Barrier(MPI_COMM_WORLD);
#endif
if (ProcID == 0 && Brk_Flag == 1 && Num_Proc > 1) {
fix_output();
}
/***********************************************************************/
/***********************************************************************/
/***********************************************************************/
/*
* PRINT A MESSAGE TO STDOUT SAYING WE ARE DONE
*/
P0PRINTF("\n-done\n\n");
/***********************************************************************/
/***********************************************************************/
/***********************************************************************/
/*
* FREE MEMORY ALLOCATED BY THE PROGRAM
*/
/*
* free the element block / element based structures
*/
free_element_blocks(EXO_ptr);
/*
* free nodal based structures
*/
free_nodes();
#ifdef FREE_PROBLEM
free_problem ( EXO_ptr, DPI_ptr );
#endif
/*
* Free command line stuff
*/
if ( ProcID == 0 )
{
if ( argc > 1 )
{
for (i=0; i<argc; i++)
{
#ifdef DEBUG
fprintf(stderr, "clc[%d]->string &= 0x%x\n", i, clc[i]->string);
fprintf(stderr, "clc[%d] &= 0x%x\n", i, clc[i]);
#endif
safer_free((void **) &(clc[i]->string));
safer_free((void **) (clc + i));
}
safer_free((void **) &clc);
}
}
/*
* Free exodus database structures
*/
free_exo(EXO_ptr);
safer_free((void **) &EXO_ptr);
if ( Num_Proc > 1 )
{
free_dpi(DPI_ptr);
}
else
{
free_dpi_uni(DPI_ptr);
}
safer_free((void **) &DPI_ptr);
/*
* Remove front scratch file [/tmp/lu.'pid'.0]
*/
if (Linear_Solver == FRONT)
{
unlerr = unlink(front_scratch_directory);
WH(unlerr, "Unlink problem with front scratch file");
}
#ifdef PARALLEL
total_time = ( MPI_Wtime() - time_start )/ 60. ;
DPRINTF(stderr, "\nProc 0 runtime: %10.2f Minutes.\n\n",total_time);
MPI_Finalize();
#endif
#ifndef PARALLEL
(void)time(&now);
total_time = (double)(now) - time_start;
fprintf(stderr, "\nProc 0 runtime: %10.2f Minutes.\n\n",total_time/60);
#endif
fflush(stdout);
fflush(stderr);
log_msg("GOMA ends normally.");
return (0);
}
void output_stability_matrices(double *mass_matrix,
double *jacobian_matrix,
int *ija,
int num_total_nodes,
int NumUnknowns,
int NZeros)
{
static int fake = 0;
int i, j, k, num_B_nonzeros, num_J_nonzeros;
FILE *mass_file, *jacobian_file, *vars_file;
char LSA_mass_output_filename[256],
LSA_jacobian_output_filename[256],
LSA_vars_output_filename[256];
/* Get the filenames. These will be different if we're doing a
* normal mode analysis for 3D stability of a 2D flow. */
if(LSA_3D_of_2D_wave_number == -1.0)
{
sprintf(LSA_mass_output_filename, "LSA_mass_coo.out");
sprintf(LSA_jacobian_output_filename, "LSA_jac_coo.out");
sprintf(LSA_vars_output_filename, "LSA_vars.out");
}
else
{
sprintf(LSA_mass_output_filename, "LSA_mass_coo-%g.out",
(double)fake);
sprintf(LSA_jacobian_output_filename, "LSA_jac_coo-%g.out",
(double)fake);
sprintf(LSA_vars_output_filename, "LSA_vars-%g.out",
(double)fake++);
}
/* Multiplex output names in parallel */
if (Num_Proc > 1)
{
multiname(LSA_mass_output_filename, ProcID, Num_Proc);
multiname(LSA_jacobian_output_filename, ProcID, Num_Proc);
multiname(LSA_vars_output_filename, ProcID, Num_Proc);
}
printf("Writing matrix files (%s, %s, %s)...",
LSA_mass_output_filename,
LSA_jacobian_output_filename,
LSA_vars_output_filename);
fflush(stdout);
/* First, count out how many actual nonzeros there are. This will
* reduce filesizes substantially (especially for the mass
* matrix.
*/
num_J_nonzeros = 0;
num_B_nonzeros = 0;
for (i=0; i<NumUnknowns; i++)
{
if(fabs(jacobian_matrix[i]) > LSA_MATRIX_OUTPUT_TOLERANCE) num_J_nonzeros++;
if(fabs(mass_matrix[i]) > LSA_MATRIX_OUTPUT_TOLERANCE) num_B_nonzeros++;
for (j=ija[i]; j<ija[i+1]; j++)
{
if(fabs(jacobian_matrix[j]) > LSA_MATRIX_OUTPUT_TOLERANCE) num_J_nonzeros++;
if(fabs(mass_matrix[j]) > LSA_MATRIX_OUTPUT_TOLERANCE) num_B_nonzeros++;
}
}
mass_file = fopen(LSA_mass_output_filename, "w");
if(!mass_file)
EH(-1, "Could not open mass matrix output file.");
jacobian_file = fopen(LSA_jacobian_output_filename, "w");
if(!jacobian_file)
EH(-1, "Could not open jacobian matrix output file.");
/* Print out header line containing #rows, #nonzeros.
*/
fprintf(jacobian_file, "%12d\n%12d\n", num_J_nonzeros, NumUnknowns);
fprintf(mass_file, "%12d\n%12d\n", num_B_nonzeros, NumUnknowns);
k = 0;
for (i=0; i<NumUnknowns; i++)
{
if(fabs(mass_matrix[i]) > LSA_MATRIX_OUTPUT_TOLERANCE)
fprintf(mass_file, " %5d %5d % 17.14e\n", i, i, mass_matrix[i]);
if(fabs(jacobian_matrix[i]) > LSA_MATRIX_OUTPUT_TOLERANCE)
fprintf(jacobian_file, " %5d %5d % 17.14e\n", i, i, jacobian_matrix[i]);
k++;
for (j=ija[i]; j<ija[i+1]; j++)
{
if(fabs(mass_matrix[j]) > LSA_MATRIX_OUTPUT_TOLERANCE)
fprintf(mass_file, " %5d %5d % 17.14e\n", i, ija[j], mass_matrix[j]);
if(fabs(jacobian_matrix[j]) > LSA_MATRIX_OUTPUT_TOLERANCE)
fprintf(jacobian_file, " %5d %5d % 17.14e\n", i, ija[j], jacobian_matrix[j]);
k++;
}
}
fclose(mass_file);
fclose(jacobian_file);
/* MMH Find out which components of the solution vector correspond
* to which unknowns. I know there's a better way to do this, but
* I just don't know what it is. Oh well...
*/
vars_file = fopen(LSA_vars_output_filename, "w");
if(!vars_file)
EH(-1, "Could not open variable listing output file.");
for(i = 0; i < num_total_nodes; i++)
{
if( (j = Index_Solution(i, VELOCITY1, 0, 0, -1)) > -1 )
fprintf(vars_file, "u %d\n", j);
if( (j = Index_Solution(i, VELOCITY2, 0, 0, -1)) > -1 )
fprintf(vars_file, "v %d\n", j);
if( (j = Index_Solution(i, VELOCITY3, 0, 0, -1)) > -1 )
fprintf(vars_file, "w %d\n", j);
if( (j = Index_Solution(i, MESH_DISPLACEMENT1, 0, 0, -1)) > -1 )
fprintf(vars_file, "x %d\n", j);
if( (j = Index_Solution(i, MESH_DISPLACEMENT2, 0, 0, -1)) > -1 )
fprintf(vars_file, "y %d\n", j);
if( (j = Index_Solution(i, PRESSURE, 0, 0, -1)) > -1 )
fprintf(vars_file, "p %d\n", j);
if( (j = Index_Solution(i, PRESSURE, 0, 1, -1)) > -1 )
fprintf(vars_file, "p %d\n", j);
if( (j = Index_Solution(i, PRESSURE, 0, 2, -1)) > -1 )
fprintf(vars_file, "p %d\n", j);
}
fclose(vars_file);
puts("done.");
printf("LSA (in) nnz = %d\n (out) nnz = %d\n (out) J_nnz = %d\n (out) B_nnz = %d\n\n",
NZeros, k, num_J_nonzeros, num_B_nonzeros);
fflush(stdout);
}
int
goma_init_(dbl *time1, int *nnodes, int *nelems,
int *nnv_in, int *nev_in, int *i_soln, int *i_post)
/*
* Initial main driver for GOMA. Derived from a (1/93) release of
* the rf_salsa program by
*
* Original Authors: John Shadid (1421)
* Scott Hutchinson (1421)
* Harry Moffat (1421)
*
* Date: 12/3/92
*
*
* Updates and Changes by:
* Randy Schunk (9111)
* P. A. Sackinger (9111)
* R. R. Rao (9111)
* R. A. Cairncross (Univ. of Delaware)
* Dates: 2/93 - 6/96
*
* Modified for continuation
* Ian Gates
* Dates: 2/98 - 10/98
* Dates: 7/99 - 8/99
*
* Last modified: Wed June 26 14:21:35 MST 1994 [email protected]
* Hello.
*
* Note: Many modifications from an early 2/93 pre-release
* version of rf_salsa were made by various persons
* in order to test ideas about moving/deforming meshes...
*/
{
/* Local Declarations */
double time_start, total_time; /* timing variables */
#ifndef PARALLEL
struct tm *tm_ptr; /* additional serial timing variables */
time_t the_time;
#endif
int error;
int i;
int j;
static int first_goma_call=TRUE;
char **ptmp;
static const char *yo="goma_init";
struct Command_line_command **clc=NULL; /* point to command line structure */
int nclc = 0; /* number of command line commands */
/********************** BEGIN EXECUTION ***************************************/
/* assume number of commands is less than or equal to the number of
* arguments in the command line minus 1 (1st is program name) */
/*
* Get the name of the executable, yo
*/
#ifdef PARALLEL
if( first_goma_call ) {
Argc = 1;
Argv = (char **) smalloc( Argc*sizeof(char *) );
Argv[0] = (char *) yo;
MPI_Init(&Argc, &Argv); /*PRS will have to fix this. Too late TAB already did. */
}
time_start = MPI_Wtime();
#else /* PARALLEL */
(void) time(&the_time);
tm_ptr = gmtime(&the_time);
time_start = (double) ( tm_ptr->tm_sec
+ 60. * ( 60. * ( tm_ptr->tm_yday * 24. + tm_ptr->tm_hour )
+ tm_ptr->tm_min )
);
#endif /* PARALLEL */
*time1 = time_start;
/* Argv = argv; */
/* Argc = argc; */
time_goma_started = time_start;
#ifdef PARALLEL
/*
* Determine the parallel processing status, if any. We need to know
* pretty early if we're "one of many" or the only process.
*/
error = MPI_Comm_size(MPI_COMM_WORLD, &Num_Proc);
error = MPI_Comm_rank(MPI_COMM_WORLD, &ProcID);
/*
* Setup a default Proc_config so we can use utility routines
* from Aztec
*/
AZ_set_proc_config(Proc_Config, MPI_COMM_WORLD);
/* set the output limit flag if need be */
if( Num_Proc > DP_PROC_PRINT_LIMIT ) Unlimited_Output = FALSE;
#ifdef HAVE_MPE_H
error = MPE_Init_log();
#endif /* HAVE_MPE_H */
Dim = 0; /* for any hypercube legacy code... */
#endif /* PARALLEL */
#ifndef PARALLEL
Dim = 0;
ProcID = 0;
Num_Proc = 1;
#endif /* PARALLEL */
/*
* HKM - Change the ieee exception handling based on the machine and
* the level of debugging/speed desired. This call currently causes
* core dumps for floating point exceptions.
*/
handle_ieee();
log_msg("--------------");
log_msg("GOMA begins...");
#ifdef USE_CGM
cgm_initialize();
#endif
/*
* Some initial stuff that only the master process does.
*/
/*PRS: Disable this command line stuff for the jas coupled version */
/*-----------------------------------------------------------------*/
/* if ( ProcID == 0 ) */
/* { */
/* if (argc > 1) */
/* { */
/* log_msg("Preprocessing command line options."); */
/* clc = (struct Command_line_command **) */
/* smalloc( argc * sizeof(struct Command_line_command *)); */
/* for (i=0; i<argc; i++) */
/* { */
/* clc[i] = (struct Command_line_command *) */
/* smalloc(sizeof(struct Command_line_command)); */
/* clc[i]->type = 0; /\* initialize command line structure *\/ */
/* clc[i]->i_val = 0; */
/* clc[i]->r_val = 0.; */
/* clc[i]->string = (char *) */
/* smalloc(MAX_COMMAND_LINE_LENGTH*sizeof(char)); */
/* for ( j=0; j<MAX_COMMAND_LINE_LENGTH; j++) */
/* { */
/* clc[i]->string[j] = '\0'; */
/* } */
/* #ifdef DEBUG */
/* fprintf(stderr, "clc[%d]->string is at 0x%x\n", i, clc[i]->string); */
/* fprintf(stderr, "clc[%d] is at 0x%x\n", i, clc[i]); */
/* #endif */
/* } */
/* } */
/* PRS For the JAS version we will use the default input file name "input" */
strcpy(Input_File, "input");
/* if (argc > 1) translate_command_line(argc, argv, clc, &nclc); */
/* print_code_version(); */
/* ptmp = legal_notice; */
/* while ( strcmp(*ptmp, LAST_LEGAL_STRING) != 0 ) */
/* { */
/* fprintf(stderr, "%s", *ptmp++); */
/* } */
/* } */
/*
* Allocate the uniform problem description structure and
* the problem description structures on all processors
*/
error = pd_alloc();
EH(error, "pd_alloc problem");
#ifdef DEBUG
fprintf(stderr, "P_%d at barrier after pd_alloc\n", ProcID);
#ifdef PARALLEL
error = MPI_Barrier(MPI_COMM_WORLD);
#endif
#endif
log_msg("Allocating mp, gn, ...");
error = mp_alloc();
EH(error, "mp_alloc problem");
error = gn_alloc();
EH(error, "gn_alloc problem");
error = ve_alloc();
EH(error, "ve_alloc problem");
error = elc_alloc();
EH(error, "elc_alloc problem");
error = elc_rs_alloc();
EH(error, "elc_alloc problem");
error = cr_alloc();
EH(error, "cr_alloc problem");
error = evp_alloc();
EH(error, "evp_alloc problem");
error = tran_alloc();
EH(error, "tran_alloc problem");
error = libio_alloc();
EH(error, "libio_alloc problem");
error = eigen_alloc();
EH(error, "eigen_alloc problem");
error = cont_alloc();
EH(error, "cont_alloc problem");
error = loca_alloc();
EH(error, "loca_alloc problem");
error = efv_alloc();
EH(error, "efv_alloc problem");
#ifdef DEBUG
fprintf(stderr, "P_%d at barrier before read_input_file()\n", ProcID);
#ifdef PARALLEL
error = MPI_Barrier(MPI_COMM_WORLD);
#endif
#endif
/*PRS AGAIN, NO COMMAND LINE OVERRIDES IN THIS JAS3D VERSION */
/*
* Read ASCII input file, data files, related exodusII FEM databases.
*/
if ( ProcID == 0 )
{
log_msg("Reading input file ...");
read_input_file(clc, nclc);
}
/*
* The user-defined material properties, etc. available to goma users
* mean that some dynamically allocated data needs to be communicated.
*
* To handle this, sizing information from the input file scan is
* broadcast in stages so that the other processors can allocate space
* accordingly to hold the data.
*
* Note: instead of handpacking a data structure, use MPI derived datatypes
* to gather and scatter. Pray this is done efficiently. Certainly it costs
* less from a memory standpoint.
*/
#ifdef PARALLEL
/*
* Make sure the input file was successully processed before moving on
*/
check_parallel_error("Input file error");
/*
* This is some sizing information that helps fit a little bit more
* onto the ark later on.
*/
#ifdef DEBUG
fprintf(stderr, "P_%d at barrier before noahs_raven()\n", ProcID);
error = MPI_Barrier(MPI_COMM_WORLD);
#endif
noahs_raven();
#ifdef DEBUG
fprintf(stderr, "P_%d at barrier before MPI_Bcast of Noahs_Raven\n", ProcID);
error = MPI_Barrier(MPI_COMM_WORLD);
#endif
MPI_Bcast(MPI_BOTTOM, 1, Noahs_Raven->new_type, 0, MPI_COMM_WORLD);
#ifdef DEBUG
fprintf(stderr, "P_%d at barrier after Bcast/before raven_landing()\n",
ProcID);
error = MPI_Barrier(MPI_COMM_WORLD);
#endif
/*
* Get the other processors ready to handle ark data.
*/
raven_landing();
#ifdef DEBUG
fprintf(stderr, "P_%d at barrier before noahs_ark()\n", ProcID);
error = MPI_Barrier(MPI_COMM_WORLD);
#endif
/*
* This is the main body of communicated information, including some
* whose sizes were determined because of advanced legwork by the raven.
*/
noahs_ark();
MPI_Bcast(MPI_BOTTOM, 1, Noahs_Ark->new_type, 0, MPI_COMM_WORLD);
/*
* Chemkin was initialized on processor zero during the input file
* process. Now, distribute it to all processors
*/
#ifdef USE_CHEMKIN
if (Chemkin_Needed) {
chemkin_initialize_mp();
}
#endif
/*
* Once the ark has landed, there are additional things that will need to
* be sent by dove. Example: BC_Types[]->u-BC arrays.
*
*/
ark_landing();
noahs_dove();
MPI_Bcast(MPI_BOTTOM, 1, Noahs_Dove->new_type, 0, MPI_COMM_WORLD);
#endif /* End of ifdef PARALLEL */
/*
* We sent the packed line to all processors that contained geometry
* creation commands. Now we need to step through it and create
* geometry as we go (including possibly reading an ACIS .sat file).
*
*/
#ifdef USE_CGM
create_cgm_geometry();
#endif
/*
* For parallel execution, assume the following variables will be changed
* to reflect the multiple file aspect of the problem.
*
* FEM file = file.exoII --> file_3of15.exoII
*
* Output EXODUS II file = out.exoII --> out_3of15.exoII
*
*/
/*
* Allocate space for structures holding the EXODUS II finite element
* database information and for the Distributed Processing information.
*
* These are mostly skeletons with pointers that get allocated in the
* rd_exoII and rd_dpi routines. Remember to free up those arrays first
* before freeing the major pointers.
*/
EXO_ptr = alloc_struct_1(Exo_DB, 1);
init_exo_struct(EXO_ptr);
DPI_ptr = alloc_struct_1(Dpi, 1);
init_dpi_struct(DPI_ptr);
log_msg("Reading mesh from EXODUS II file...");
error = read_mesh_exoII(EXO_ptr, DPI_ptr);
/*
* Missing files on any processor are detected at a lower level
* forcing a return to the higher level
* rd_exo --> rd_mesh --> main
* Shutdown now, if any of the exodus files weren't found
*/
if (error < 0) {
#ifdef PARALLEL
MPI_Finalize();
#endif
return(-1);
}
/*
* All of the MPI_Type_commit() calls called behind the scenes that build
* the dove, ark and raven really allocated memory. Let's free it up now that
* the initial information has been communicated.
*/
#ifdef PARALLEL
MPI_Type_free(&(Noahs_Raven->new_type));
MPI_Type_free(&(Noahs_Ark->new_type));
MPI_Type_free(&(Noahs_Dove->new_type));
#endif
/*
* Setup the rest of the Problem Description structure that depends on
* the mesh that was read in from the EXODUS II file...
*
* Note that memory allocation and some setup has already been performed
* in mm_input()...
*/
error = setup_pd();
EH( error, "Problem setting up Problem_Description.");
/*
* Let's check to see if we need the large elasto-plastic global tensors
* and allocate them if so
*/
error = evp_tensor_alloc(EXO_ptr);
EH( error, "Problems setting up evp tensors");
/*
* Now that we know about what kind of problem we're solving and the
* mesh information, let's allocate space for elemental assembly structures
*
*/
#ifdef DEBUG
DPRINTF(stderr, "About to assembly_alloc()...\n");
#endif
log_msg("Assembly allocation...");
error = assembly_alloc(EXO_ptr);
EH( error, "Problem from assembly_alloc");
if (Debug_Flag) {
DPRINTF(stderr, "%s: setting up EXODUS II output files...\n", yo);
}
/*
* These are not critical - just niceties. Also, they should not overburden
* your db with too much of this - they're capped verbiage compliant routines.
*/
add_qa_stamp(EXO_ptr);
add_info_stamp(EXO_ptr);
#ifdef DEBUG
fprintf(stderr, "added qa and info stamps\n");
#endif
/*
* If the output EXODUS II database file is different from the input
* file, then we'll need to replicate all the basic mesh information.
* But, remember that if we're parallel, that the output file names must
* be multiplexed first...
*/
if ( Num_Proc > 1 )
{
multiname(ExoFileOut, ProcID, Num_Proc);
multiname(Init_GuessFile, ProcID, Num_Proc);
if ( strcmp( Soln_OutFile, "" ) != 0 )
{
multiname(Soln_OutFile, ProcID, Num_Proc);
}
if( strcmp( ExoAuxFile, "" ) != 0 )
{
multiname(ExoAuxFile, ProcID, Num_Proc);
}
if( efv->Num_external_field != 0 )
{
for( i=0; i<efv->Num_external_field; i++ )
{
multiname(efv->file_nm[i], ProcID, Num_Proc);
}
}
}
/***********************************************************************/
/***********************************************************************/
/***********************************************************************/
/*
* Preprocess the exodus mesh
* -> Allocate pointers to structures containing element
* side bc info, First_Elem_Side_BC_Array, and
* element edge info, First_Elem_Edge_BC_Array.
* -> Determine Unique_Element_Types[] array
*/
#ifdef DEBUG
fprintf(stderr, "pre_process()...\n");
#endif
log_msg("Pre processing of mesh...");
#ifdef PARALLEL
error = MPI_Barrier(MPI_COMM_WORLD);
#endif
pre_process(EXO_ptr);
/***********************************************************************/
/***********************************************************************/
/***********************************************************************/
/*
* Load up a few key indeces in the bfd prototype basis function structures
* and make sure that each active eqn/vbl has a bf[v] that points to the
* right bfd[]...needs pre_process to find out the number of unique
* element types in the problem.
*/
#ifdef DEBUG
fprintf(stderr, "bf_init()...\n");
#endif
log_msg("Basis function initialization...");
error = bf_init(EXO_ptr);
EH( error, "Problem from bf_init");
/*
* check for parallel errors before continuing
*/
check_parallel_error("Error encountered in problem setup");
/***********************************************************************/
/***********************************************************************/
/***********************************************************************/
/*
* Allocate space for each communication exchange description.
*/
#ifdef PARALLEL
#ifdef DEBUG
fprintf(stderr, "P_%d: Parallel cx allocation\n", ProcID);
#endif
if (DPI_ptr->num_neighbors > 0) {
cx = alloc_struct_1(Comm_Ex, DPI_ptr->num_neighbors);
Request = alloc_struct_1(MPI_Request,
Num_Requests * DPI_ptr->num_neighbors);
Status = alloc_struct_1(MPI_Status,
Num_Requests * DPI_ptr->num_neighbors);
}
#endif
/***********************************************************************/
/***********************************************************************/
/***********************************************************************/
/*
* SET UP THE PROBLEM
*
* Setup node-based structures
* Finalise how boundary conditions are to be handled
* Determine what unknowns are at each owned node and then tell
* neighboring processors about your nodes
* Set up communications pattern for fast unknown updates between
* processors.
*/
(void) setup_problem(EXO_ptr, DPI_ptr);
/*
* check for parallel errors before continuing
*/
check_parallel_error("Error encountered in problem setup");
/***********************************************************************/
/***********************************************************************/
/***********************************************************************/
/*
* WRITE OUT INITIAL INFO TO EXODUS FILE
*/
/*
* Only have to initialize the exodus file if we are using different
* files for the output versus the input mesh
*/
if (strcmp(ExoFile, ExoFileOut)) {
/*
* Temporarily we'll need to renumber the nodes and elements in the
* mesh to be 1-based. After writing, return to the 0 based indexing
* that is more convenient in C.
*/
#ifdef DEBUG
fprintf(stderr, "1-base; wr_mesh; 0-base\n");
#endif
one_base(EXO_ptr);
wr_mesh_exo(EXO_ptr, ExoFileOut, 0);
zero_base(EXO_ptr);
/*
* If running on a distributed computer, augment the plain finite
* element information of EXODUS with the description of how this
* piece fits into the global problem.
*/
if (Num_Proc > 1) {
#ifdef PARALLEL
#ifdef DEBUG
fprintf(stderr, "P_%d at barrier before wr_dpi()\n", ProcID);
fprintf(stderr, "P_%d ExoFileOut = \"%s\"\n", ProcID, ExoFileOut);
error = MPI_Barrier(MPI_COMM_WORLD);
#endif
#endif
wr_dpi(DPI_ptr, ExoFileOut, 0);
}
}
if (Num_Import_NV > 0 || Num_Import_EV > 0) printf
(" Goma will import %d nodal and %d element variables.\n",
Num_Import_NV, Num_Import_EV);
if (Num_Export_XS > 0 || Num_Export_XP > 0) printf
(" Goma will export %d solution and %d post-processing variables.\n",
Num_Export_XS, Num_Export_XP);
/* Return counts to calling program */
*nnodes = EXO_ptr->num_nodes;
*nelems = EXO_ptr->num_elems;
*nnv_in = Num_Import_NV;
*nev_in = Num_Import_EV;
*i_soln = Num_Export_XS;
*i_post = Num_Export_XP;
return (0); /* Back to animas*/
}