void mvd_colorconvert()
{
Result ret;
FILE *f = NULL;
u8* bufAdr = gfxGetFramebuffer(GFX_BOTTOM, GFX_LEFT, NULL, NULL);
u8* gfxtopadr = gfxGetFramebuffer(GFX_TOP, GFX_LEFT, NULL, NULL);
MVDSTD_Config config;
printf("mvd color-format-conversion example.\n");
f = fopen("sdmc:/mvd_indata.bin", "r");
if(f)
{
fread(inaddr, 1, 0x46500, f);
fclose(f);
}
else
{
memcpy(inaddr, bufAdr, 320*240*3);
}
memset(gfxtopadr, 0, 0x46500);
GSPGPU_FlushDataCache(inaddr, 0x46500);
GSPGPU_FlushDataCache(gfxtopadr, 0x46500);
ret = mvdstdInit(MVDMODE_COLORFORMATCONV, MVD_INPUT_YUYV422, MVD_OUTPUT_BGR565, 0, NULL);
printf("mvdstdInit(): 0x%08x\n", (unsigned int)ret);
if(ret==0)
{
mvdstdGenerateDefaultConfig(&config, 320, 240, 320, 240, (u32*)inaddr, (u32*)outaddr, (u32*)&outaddr[0x12c00]);
ret = mvdstdConvertImage(&config);
printf("mvdstdConvertImage(): 0x%08x\n", (unsigned int)ret);
}
f = fopen("sdmc:/mvd_outdata.bin", "w");
if(f)
{
fwrite(outaddr, 1, 0x100000, f);
fclose(f);
}
memcpy(gfxtopadr, outaddr, 0x46500);
mvdstdExit();
gfxFlushBuffers();
gfxSwapBuffersGpu();
gspWaitForVBlank();
}
void mvd_video()
{
Result ret;
size_t video_size, nalunitsize;
u32 video_pos=0;
u32 cur_nalunit_pos=0, prev_nalunit_pos=0;
u32 nalcount=0;
u8 *video;
u32 flagval=0;
FILE *f = NULL;
u8* gfxtopadr=NULL;
MVDSTD_Config config;
u32 prefix_offset;
u8 prefix[4] = {0x00, 0x00, 0x00, 0x01};
printf("Loading video...\n");
//This loads the entire video into memory, normally you'd use a library to stream it.
f = fopen("romfs:/video.h264", "r");
if(f==NULL)
{
printf("Faile to open the video in romfs.\n");
return;
}
video = &inaddr[0x100000];
video_size = fread(video, 1, 0xF00000, f);
fclose(f);
if(video_size==0 || video_size>=0xF00000)
{
printf("Failed to read video / video is too large.\n");
return;
}
ret = mvdstdInit(MVDMODE_VIDEOPROCESSING, MVD_INPUT_H264, MVD_OUTPUT_BGR565, MVD_DEFAULT_WORKBUF_SIZE, NULL);
printf("mvdstdInit(): 0x%08x\n", (unsigned int)ret);
if(ret!=0)return;
printf("Processing 0x%08x-byte video...\n", (unsigned int)video_size);
mvdstdGenerateDefaultConfig(&config, 240, 400, 240, 400, NULL, (u32*)outaddr, (u32*)outaddr);//Normally you'd set the input dimensions here to dimensions loaded from the actual video.
//Normally you'd use a library to load each NAL-unit, this example just parses the data manually.
while(video_pos < video_size+1)
{
cur_nalunit_pos = video_pos;
video_pos++;
prefix_offset = 1;
if(cur_nalunit_pos<video_size)
{
/*
{
if(memcmp(&video[cur_nalunit_pos], &prefix[1], 3)==0 && cur_nalunit_pos==0x2dd)
{
prefix_offset = 0;
}
}
if(prefix_offset)*/
//else
{
if(memcmp(&video[cur_nalunit_pos], prefix, 4))
{
continue;
}
else
{
video_pos++;
}
}
}
if(nalcount && prev_nalunit_pos!=cur_nalunit_pos)
{
nalunitsize = cur_nalunit_pos - prev_nalunit_pos - prefix_offset;
if(nalunitsize > 0x100000)
{
printf("The NAL-unit at offset 0x%08x is too large.\n", (unsigned int)nalunitsize);
break;
}
memcpy(inaddr, &video[prev_nalunit_pos+prefix_offset], nalunitsize);
GSPGPU_FlushDataCache(inaddr, nalunitsize);
MVDSTD_ProcessNALUnitOut tmpout;//Normally you don't really need to use this.
//printf("Processing NAL-unit at offset 0x%08x size 0x%08x...\n", (unsigned int)prev_nalunit_pos, (unsigned int)nalunitsize);
ret = mvdstdProcessVideoFrame(inaddr, nalunitsize, flagval, &tmpout);
if(!MVD_CHECKNALUPROC_SUCCESS(ret))
{
printf("mvdstdProcessVideoFrame() at NAL-unit offset 0x%08x size 0x%08x returned: 0x%08x. remaining_size=0x%08x.\n", (unsigned int)prev_nalunit_pos, (unsigned int)nalunitsize, (unsigned int)ret, (unsigned int)tmpout.remaining_size);
break;
}
if(ret!=MVD_STATUS_PARAMSET && ret!=MVD_STATUS_INCOMPLETEPROCESSING)
{
gfxtopadr = gfxGetFramebuffer(GFX_TOP, GFX_LEFT, NULL, NULL);
config.physaddr_outdata0 = osConvertVirtToPhys(gfxtopadr);
//This sets the MVD output to the framebuffer directly. This is to avoid doing the video->framebuffer image rotation on the ARM11.
//Normally you'd use a seperate MVD output buffer, then transfer that to the framebuffer(such as with GPU rendering).
ret = mvdstdRenderVideoFrame(&config, true);
if(ret!=MVD_STATUS_OK)
{
printf("mvdstdRenderVideoFrame() at NAL-unit offset 0x%08x returned: 0x%08x\n", (unsigned int)prev_nalunit_pos, (unsigned int)ret);
break;
}
hidScanInput();
if(hidKeysDown() & KEY_B)break;
//Enable/disable the flag passed to mvdstdProcessVideoFrame().
if(hidKeysDown() & KEY_DOWN)
{
flagval-= 0x1;
printf("0x%08x\n", (unsigned int)flagval);
}
if(hidKeysDown() & KEY_UP)
{
flagval+= 0x1;
printf("0x%08x\n", (unsigned int)flagval);
}
//gspWaitForVBlank();//Can't use this under this example without a major slowdown. This is due to this example not doing any buffering for the frames.
gfxSwapBuffersGpu();
}
}
nalcount++;
prev_nalunit_pos = cur_nalunit_pos;
}
mvdstdExit();
}
void draw_startup()
{
Result ret;
FILE *f = NULL;
u8* bufAdr = gfxGetFramebuffer(GFX_BOTTOM, GFX_LEFT, NULL, NULL);
u8* gfxtopadr = gfxGetFramebuffer(GFX_TOP, GFX_LEFT, NULL, NULL);
MVDSTD_Config config;
char str[256];
int i, j;
u32 cnt=0;
for(i=0;i<320;i++)
{
for(j=0;j<240;j++)
{
u32 v=(j+i*240)*3;
bufAdr[v]=(pcCos(i+cnt)+4096)/32;
bufAdr[v+1]=(pcCos(j-256+cnt)+4096)/64;
bufAdr[v+2]=(pcCos(i+128-cnt)+4096)/32;
}
}
f = fopen("sdmc:/mvd_indata.bin", "r");
if(f)
{
fread(inaddr, 1, 0x46500, f);
fclose(f);
}
else
{
memcpy(inaddr, bufAdr, 320*240*3);
}
memset(gfxtopadr, 0, 0x46500);
GSPGPU_FlushDataCache(inaddr, 0x46500);
printstring("mvd example\n");
ret = mvdstdInit(MVDMODE_COLORFORMATCONV, MVD_INPUT_YUYV422, MVD_OUTPUT_RGB565, 0);
memset(str, 0, 256);
snprintf(str, sizeof(str)-1, "mvdstdInit(): 0x%08x\n", (unsigned int)ret);
printstring(str);
if(ret>=0)
{
mvdstdGenerateDefaultConfig(&config, 320, 240, 320, 240, (u32*)inaddr, (u32*)outaddr, (u32*)&outaddr[0x12c00]);
ret = mvdstdProcessFrame(&config, NULL, 0, 0);
memset(str, 0, 256);
snprintf(str, sizeof(str)-1, "mvdstdProcessFrame(): 0x%08x\n", (unsigned int)ret);
printstring(str);
}
svcSleepThread(1000000000);//Not sure how to determine when frame processing finishes.
GSPGPU_InvalidateDataCache(outaddr, 0x100000);
f = fopen("sdmc:/mvd_outdata.bin", "w");
if(f)
{
fwrite(outaddr, 1, 0x100000, f);
fclose(f);
}
f = fopen("sdmc:/mvd_log", "w");
if(f)
{
fwrite(logstring, 1, strlen(logstring), f);
fclose(f);
}
memcpy(gfxtopadr, outaddr, 0x46500);
mvdstdExit();
gfxFlushBuffers();
gfxSwapBuffers();
gspWaitForVBlank();
}
