C++ (Cpp) mx53_evk_init_uart Examples

Example #1

static void __init mx53_evk_board_init(void)
{
	int i;

	mx53_evk_io_init();

	gp_reg_id = evk_regulator_data.cpu_reg_id;
	lp_reg_id = evk_regulator_data.vcc_reg_id;

	mxc_spdif_data.spdif_core_clk = clk_get(NULL, "spdif_xtal_clk");
	clk_put(mxc_spdif_data.spdif_core_clk);

	mx53_evk_init_uart();
	imx53_add_srtc();
	mx53_evk_fec_reset();
	imx53_add_fec(&mx53_evk_fec_pdata);

	imx53_add_ipuv3(0, &ipu_data);
	for (i = 0; i < ARRAY_SIZE(evk_fb_data); i++)
		imx53_add_ipuv3fb(i, &evk_fb_data[i]);
	imx53_add_vpu();
	imx53_add_tve(&tve_data);
	imx53_add_v4l2_output(0);

	if (!board_is_mx53_arm2()) {
		imx53_add_mxc_pwm(1);
		imx53_add_mxc_pwm_backlight(0, &evk_pwm_backlight_data);
	}

	imx53_add_dvfs_core(&evk_dvfs_core_data);
	imx53_add_busfreq();
	imx53_add_imx_i2c(0, &mx53_evk_i2c_data);
	imx53_add_imx_i2c(1, &mx53_evk_i2c_data);
	i2c_register_board_info(0, mxc_i2c0_board_info,
				ARRAY_SIZE(mxc_i2c0_board_info));
	i2c_register_board_info(1, mxc_i2c1_board_info,
				ARRAY_SIZE(mxc_i2c1_board_info));

	imx53_add_sdhci_esdhc_imx(0, &mx53_evk_sd1_data);
	imx53_add_sdhci_esdhc_imx(2, &mx53_evk_sd3_data);
	mxc_register_device(&imx_ahci_device_hwmon, NULL);

	spi_register_board_info(mx53_evk_spi_board_info,
		ARRAY_SIZE(mx53_evk_spi_board_info));
	imx53_add_ecspi(0, &mx53_evk_spi_data);
	imx53_add_imx2_wdt(0, NULL);

	imx53_add_spdif(&mxc_spdif_data);
	imx53_add_spdif_dai();
	imx53_add_spdif_audio_device();

	/* this call required to release SCC RAM partition held by ROM
	  * during boot, even if SCC2 driver is not part of the image
	  */
	imx53_add_mxc_scc2();
}

Example #2

File: board-mx53_evk.c Project: PurpleAlien/linux-linaro-natty

static void __init mx53_evk_board_init(void)
{
	mx53_evk_io_init();

	mx53_evk_init_uart();
	imx53_add_srtc();
	mx53_evk_fec_reset();
	imx53_add_fec(&mx53_evk_fec_pdata);

	imx53_add_ipuv3(&ipu_data);
	imx53_add_vpu();
	imx53_add_tve(&tve_data);
	imx53_add_v4l2_output(0);

	if (!board_is_mx53_arm2()) {
		imx53_add_mxc_pwm(1);
		imx53_add_mxc_pwm_backlight(0, &evk_pwm_backlight_data);
	}

	imx53_add_dvfs_core(&evk_dvfs_core_data);
	imx53_add_busfreq(&evk_bus_freq_data);
	imx53_add_imx_i2c(0, &mx53_evk_i2c_data);
	imx53_add_imx_i2c(1, &mx53_evk_i2c_data);
	i2c_register_board_info(0, mxc_i2c0_board_info,
				ARRAY_SIZE(mxc_i2c0_board_info));
	i2c_register_board_info(1, mxc_i2c1_board_info,
				ARRAY_SIZE(mxc_i2c1_board_info));

	imx53_add_sdhci_esdhc_imx(0, &mx53_evk_sd1_data);
	imx53_add_sdhci_esdhc_imx(2, &mx53_evk_sd3_data);

	spi_register_board_info(mx53_evk_spi_board_info,
		ARRAY_SIZE(mx53_evk_spi_board_info));
	imx53_add_ecspi(0, &mx53_evk_spi_data);
	imx53_add_imx2_wdt(0, NULL);

	/* this call required to release SCC RAM partition held by ROM
	  * during boot, even if SCC2 driver is not part of the image
	  */
	imx53_add_mxc_scc2();
}

Example #3

File: mach-mx53_evk.c Project: 7L/pi_plus

static void __init mx53_evk_board_init(void)
{
	imx53_soc_init();
	imx53_evk_common_init();

	mx53_evk_init_uart();
	mx53_evk_fec_reset();
	imx53_add_fec(&mx53_evk_fec_pdata);

	imx53_add_imx_i2c(0, &mx53_evk_i2c_data);
	imx53_add_imx_i2c(1, &mx53_evk_i2c_data);

	imx53_add_sdhci_esdhc_imx(0, NULL);
	imx53_add_sdhci_esdhc_imx(1, NULL);

	spi_register_board_info(mx53_evk_spi_board_info,
		ARRAY_SIZE(mx53_evk_spi_board_info));
	imx53_add_ecspi(0, &mx53_evk_spi_data);
	imx53_add_imx2_wdt(0);
	gpio_led_register_device(-1, &mx53evk_leds_data);
}