C++ (Cpp) mxc_iomux_v3_get_multiple_pads Examples

Example #1

File: mx50_arm2.c Project: Angor00/linux-aura-hd-android-2.6.35.3

static void mx50_suspend_enter()
{
	iomux_v3_cfg_t *p = suspend_enter_pads;
	int i;
	/* Set PADCTRL to 0 for all IOMUX. */
	for (i = 0; i < ARRAY_SIZE(suspend_enter_pads); i++) {
		suspend_exit_pads[i] = *p;
		*p &= ~MUX_PAD_CTRL_MASK;
		p++;
	}
	mxc_iomux_v3_get_multiple_pads(suspend_exit_pads,
			ARRAY_SIZE(suspend_exit_pads));
	mxc_iomux_v3_setup_multiple_pads(suspend_enter_pads,
			ARRAY_SIZE(suspend_enter_pads));
}

Example #2

File: board-mx6sl_arm2.c Project: develersrl/winmate-kernel

static void mx6sl_suspend_enter()
{
	iomux_v3_cfg_t *p = suspend_enter_pads;
	int i;

	/* Set PADCTRL to 0 for all IOMUX. */
	for (i = 0; i < ARRAY_SIZE(suspend_enter_pads); i++) {
		suspend_exit_pads[i] = *p;
		*p &= ~MUX_PAD_CTRL_MASK;
		/* Enable the Pull down and the keeper
		  * Set the drive strength to 0.
		  */
		*p |= ((u64)0x3000 << MUX_PAD_CTRL_SHIFT);
		p++;
	}
	mxc_iomux_v3_get_multiple_pads(suspend_exit_pads,
			ARRAY_SIZE(suspend_exit_pads));
	mxc_iomux_v3_setup_multiple_pads(suspend_enter_pads,
			ARRAY_SIZE(suspend_enter_pads));
}

Example #3

File: mx50_rdp_nimbus.c Project: SanDisk-Open-Source/wireless-media-drive

static void mx50_suspend_enter()
{
	iomux_v3_cfg_t *p = suspend_enter_pads;
	int i;
	iomux_v3_cfg_t iomux_setting =
			(MX50_PAD_ECSPI2_SCLK__GPIO_4_16 &
			~MUX_PAD_CTRL_MASK) | MUX_PAD_CTRL(0x84);

	/* Clear the SELF_BIAS bit and power down
	 * the band-gap.
	 */
	__raw_writel(MXC_ANADIG_REF_SELFBIAS_OFF,
			apll_base + MXC_ANADIG_MISC_CLR);
	__raw_writel(MXC_ANADIG_REF_PWD,
			apll_base + MXC_ANADIG_MISC_SET);

	//if (board_is_mx50_rd3()) {
		/* Enable the Pull/keeper */
		mxc_iomux_v3_setup_pad(iomux_setting);
		gpio_request(DCDC_EN, "dcdc-en");
		gpio_direction_output(DCDC_EN, 0);
	//}

	/* Set PADCTRL to 0 for all IOMUX. */
	for (i = 0; i < ARRAY_SIZE(suspend_enter_pads); i++) {
		suspend_exit_pads[i] = *p;
		*p &= ~MUX_PAD_CTRL_MASK;
		p++;
	}
   
	mxc_iomux_v3_get_multiple_pads(suspend_exit_pads,
			ARRAY_SIZE(suspend_exit_pads));
	mxc_iomux_v3_setup_multiple_pads(suspend_enter_pads,
			ARRAY_SIZE(suspend_enter_pads));

    nimbus_gpio_iomux_deinit();

    //system_status=2;

}