int
step_systime(
double step
)
{
time_t pivot; /* for ntp era unfolding */
struct timeval timetv, tvlast, tvdiff;
struct timespec timets;
struct calendar jd;
l_fp fp_ofs, fp_sys; /* offset and target system time in FP */
/*
* Get pivot time for NTP era unfolding. Since we don't step
* very often, we can afford to do the whole calculation from
* scratch. And we're not in the time-critical path yet.
*/
#if SIZEOF_TIME_T > 4
/*
* This code makes sure the resulting time stamp for the new
* system time is in the 2^32 seconds starting at 1970-01-01,
* 00:00:00 UTC.
*/
pivot = 0x80000000;
#if USE_COMPILETIME_PIVOT
/*
* Add the compile time minus 10 years to get a possible target
* area of (compile time - 10 years) to (compile time + 126
* years). This should be sufficient for a given binary of
* NTPD.
*/
if (ntpcal_get_build_date(&jd)) {
jd.year -= 10;
pivot += ntpcal_date_to_time(&jd);
} else {
msyslog(LOG_ERR,
"step-systime: assume 1970-01-01 as build date");
}
#else
UNUSED_LOCAL(jd);
#endif /* USE_COMPILETIME_PIVOT */
#else
UNUSED_LOCAL(jd);
/* This makes sure the resulting time stamp is on or after
* 1969-12-31/23:59:59 UTC and gives us additional two years,
* from the change of NTP era in 2036 to the UNIX rollover in
* 2038. (Minus one second, but that won't hurt.) We *really*
* need a longer 'time_t' after that! Or a different baseline,
* but that would cause other serious trouble, too.
*/
pivot = 0x7FFFFFFF;
#endif
/* get the complete jump distance as l_fp */
DTOLFP(sys_residual, &fp_sys);
DTOLFP(step, &fp_ofs);
L_ADD(&fp_ofs, &fp_sys);
/* ---> time-critical path starts ---> */
/* get the current time as l_fp (without fuzz) and as struct timeval */
get_ostime(&timets);
fp_sys = tspec_stamp_to_lfp(timets);
tvlast.tv_sec = timets.tv_sec;
tvlast.tv_usec = (timets.tv_nsec + 500) / 1000;
/* get the target time as l_fp */
L_ADD(&fp_sys, &fp_ofs);
/* unfold the new system time */
timetv = lfp_stamp_to_tval(fp_sys, &pivot);
/* now set new system time */
if (ntp_set_tod(&timetv, NULL) != 0) {
msyslog(LOG_ERR, "step-systime: %m");
return FALSE;
}
/* <--- time-critical path ended with 'ntp_set_tod()' <--- */
sys_residual = 0;
lamport_violated = (step < 0);
if (step_callback)
(*step_callback)();
#ifdef NEED_HPUX_ADJTIME
/*
* CHECKME: is this correct when called by ntpdate?????
*/
_clear_adjtime();
#endif
/*
* FreeBSD, for example, has:
* struct utmp {
* char ut_line[UT_LINESIZE];
* char ut_name[UT_NAMESIZE];
* char ut_host[UT_HOSTSIZE];
* long ut_time;
* };
* and appends line="|", name="date", host="", time for the OLD
* and appends line="{", name="date", host="", time for the NEW
* to _PATH_WTMP .
*
* Some OSes have utmp, some have utmpx.
*/
/*
* Write old and new time entries in utmp and wtmp if step
* adjustment is greater than one second.
*
* This might become even Uglier...
*/
tvdiff = abs_tval(sub_tval(timetv, tvlast));
if (tvdiff.tv_sec > 0) {
#ifdef HAVE_UTMP_H
struct utmp ut;
#endif
#ifdef HAVE_UTMPX_H
struct utmpx utx;
#endif
#ifdef HAVE_UTMP_H
ZERO(ut);
#endif
#ifdef HAVE_UTMPX_H
ZERO(utx);
#endif
/* UTMP */
#ifdef UPDATE_UTMP
# ifdef HAVE_PUTUTLINE
# ifndef _PATH_UTMP
# define _PATH_UTMP UTMP_FILE
# endif
utmpname(_PATH_UTMP);
ut.ut_type = OLD_TIME;
strlcpy(ut.ut_line, OTIME_MSG, sizeof(ut.ut_line));
ut.ut_time = tvlast.tv_sec;
setutent();
pututline(&ut);
ut.ut_type = NEW_TIME;
strlcpy(ut.ut_line, NTIME_MSG, sizeof(ut.ut_line));
ut.ut_time = timetv.tv_sec;
setutent();
pututline(&ut);
endutent();
# else /* not HAVE_PUTUTLINE */
# endif /* not HAVE_PUTUTLINE */
#endif /* UPDATE_UTMP */
/* UTMPX */
#ifdef UPDATE_UTMPX
# ifdef HAVE_PUTUTXLINE
utx.ut_type = OLD_TIME;
strlcpy(utx.ut_line, OTIME_MSG, sizeof(utx.ut_line));
utx.ut_tv = tvlast;
setutxent();
pututxline(&utx);
utx.ut_type = NEW_TIME;
strlcpy(utx.ut_line, NTIME_MSG, sizeof(utx.ut_line));
utx.ut_tv = timetv;
setutxent();
pututxline(&utx);
endutxent();
# else /* not HAVE_PUTUTXLINE */
# endif /* not HAVE_PUTUTXLINE */
#endif /* UPDATE_UTMPX */
/* WTMP */
#ifdef UPDATE_WTMP
# ifdef HAVE_PUTUTLINE
# ifndef _PATH_WTMP
# define _PATH_WTMP WTMP_FILE
# endif
utmpname(_PATH_WTMP);
ut.ut_type = OLD_TIME;
strlcpy(ut.ut_line, OTIME_MSG, sizeof(ut.ut_line));
ut.ut_time = tvlast.tv_sec;
setutent();
pututline(&ut);
ut.ut_type = NEW_TIME;
strlcpy(ut.ut_line, NTIME_MSG, sizeof(ut.ut_line));
ut.ut_time = timetv.tv_sec;
setutent();
pututline(&ut);
endutent();
# else /* not HAVE_PUTUTLINE */
# endif /* not HAVE_PUTUTLINE */
#endif /* UPDATE_WTMP */
/* WTMPX */
#ifdef UPDATE_WTMPX
# ifdef HAVE_PUTUTXLINE
utx.ut_type = OLD_TIME;
utx.ut_tv = tvlast;
strlcpy(utx.ut_line, OTIME_MSG, sizeof(utx.ut_line));
# ifdef HAVE_UPDWTMPX
updwtmpx(WTMPX_FILE, &utx);
# else /* not HAVE_UPDWTMPX */
# endif /* not HAVE_UPDWTMPX */
# else /* not HAVE_PUTUTXLINE */
# endif /* not HAVE_PUTUTXLINE */
# ifdef HAVE_PUTUTXLINE
utx.ut_type = NEW_TIME;
utx.ut_tv = timetv;
strlcpy(utx.ut_line, NTIME_MSG, sizeof(utx.ut_line));
# ifdef HAVE_UPDWTMPX
updwtmpx(WTMPX_FILE, &utx);
# else /* not HAVE_UPDWTMPX */
# endif /* not HAVE_UPDWTMPX */
# else /* not HAVE_PUTUTXLINE */
# endif /* not HAVE_PUTUTXLINE */
#endif /* UPDATE_WTMPX */
}
return TRUE;
}
/*
* hourly_stats - print some interesting stats
*/
void
write_stats(void)
{
FILE *fp;
double ftemp;
#ifdef DOSYNCTODR
struct timeval tv;
#if !defined(VMS)
int prio_set;
#endif
#ifdef HAVE_GETCLOCK
struct timespec ts;
#endif
int o_prio;
/*
* Sometimes having a Sun can be a drag.
*
* The kernel variable dosynctodr controls whether the system's
* soft clock is kept in sync with the battery clock. If it
* is zero, then the soft clock is not synced, and the battery
* clock is simply left to rot. That means that when the system
* reboots, the battery clock (which has probably gone wacky)
* sets the soft clock. That means ntpd starts off with a very
* confused idea of what time it is. It then takes a large
* amount of time to figure out just how wacky the battery clock
* has made things drift, etc, etc. The solution is to make the
* battery clock sync up to system time. The way to do THAT is
* to simply set the time of day to the current time of day, but
* as quickly as possible. This may, or may not be a sensible
* thing to do.
*
* CAVEAT: settimeofday() steps the sun clock by about 800 us,
* so setting DOSYNCTODR seems a bad idea in the
* case of us resolution
*/
#if !defined(VMS)
/*
* (prr) getpriority returns -1 on error, but -1 is also a valid
* return value (!), so instead we have to zero errno before the
* call and check it for non-zero afterwards.
*/
errno = 0;
prio_set = 0;
o_prio = getpriority(PRIO_PROCESS,0); /* Save setting */
/*
* (prr) if getpriority succeeded, call setpriority to raise
* scheduling priority as high as possible. If that succeeds
* as well, set the prio_set flag so we remember to reset
* priority to its previous value below. Note that on Solaris
* 2.6 (and beyond?), both getpriority and setpriority will fail
* with ESRCH, because sched_setscheduler (called from main) put
* us in the real-time scheduling class which setpriority
* doesn't know about. Being in the real-time class is better
* than anything setpriority can do, anyhow, so this error is
* silently ignored.
*/
if ((errno == 0) && (setpriority(PRIO_PROCESS,0,-20) == 0))
prio_set = 1; /* overdrive */
#endif /* VMS */
#ifdef HAVE_GETCLOCK
(void) getclock(TIMEOFDAY, &ts);
tv.tv_sec = ts.tv_sec;
tv.tv_usec = ts.tv_nsec / 1000;
#else /* not HAVE_GETCLOCK */
GETTIMEOFDAY(&tv,(struct timezone *)NULL);
#endif /* not HAVE_GETCLOCK */
if (ntp_set_tod(&tv,(struct timezone *)NULL) != 0)
msyslog(LOG_ERR, "can't sync battery time: %m");
#if !defined(VMS)
if (prio_set)
setpriority(PRIO_PROCESS, 0, o_prio); /* downshift */
#endif /* VMS */
#endif /* DOSYNCTODR */
record_sys_stats();
ftemp = fabs(prev_drift_comp - drift_comp);
prev_drift_comp = drift_comp;
if (ftemp > clock_phi)
return;
if (stats_drift_file != 0 && drift_file_sw) {
/*
* When the frequency file is written, initialize the
* wander threshold to a configured initial value.
* Thereafter reduce it by a factor of 0.5. When it
* drops below the frequency wander, write the frequency
* file. This adapts to the prevailing wander yet
* minimizes the file writes.
*/
drift_file_sw = FALSE;
wander_resid *= 0.5;
#ifdef DEBUG
if (debug)
printf("write_stats: wander %.6lf thresh %.6lf, freq %.6lf\n",
clock_stability * 1e6, wander_resid * 1e6,
drift_comp * 1e6);
#endif
if (sys_leap != LEAP_NOTINSYNC && clock_stability >
wander_resid) {
wander_resid = wander_threshold;
if ((fp = fopen(stats_temp_file, "w")) == NULL)
{
msyslog(LOG_ERR,
"frequency file %s: %m",
stats_temp_file);
return;
}
fprintf(fp, "%.3f\n", drift_comp * 1e6);
(void)fclose(fp);
/* atomic */
#ifdef SYS_WINNT
if (_unlink(stats_drift_file)) /* rename semantics differ under NT */
msyslog(LOG_WARNING,
"Unable to remove prior drift file %s, %m",
stats_drift_file);
#endif /* SYS_WINNT */
#ifndef NO_RENAME
if (rename(stats_temp_file, stats_drift_file))
msyslog(LOG_WARNING,
"Unable to rename temp drift file %s to %s, %m",
stats_temp_file, stats_drift_file);
#else
/* we have no rename NFS of ftp in use */
if ((fp = fopen(stats_drift_file, "w")) ==
NULL) {
msyslog(LOG_ERR,
"frequency file %s: %m",
stats_drift_file);
return;
}
#endif
#if defined(VMS)
/* PURGE */
{
$DESCRIPTOR(oldvers,";-1");
struct dsc$descriptor driftdsc = {
strlen(stats_drift_file), 0, 0,
stats_drift_file };
while(lib$delete_file(&oldvers,
&driftdsc) & 1);
}
#endif
} else {
/* XXX: Log a message at INFO level */
}
}
}
/*
* step_systime - step the system clock.
*/
int
step_systime(
double now
)
{
struct timeval timetv, adjtv, oldtimetv;
int isneg = 0;
double dtemp;
#if defined(HAVE_CLOCK_GETTIME) || defined(HAVE_GETCLOCK)
struct timespec ts;
#endif
dtemp = sys_residual + now;
if (dtemp < 0) {
isneg = 1;
dtemp = - dtemp;
adjtv.tv_sec = (int32)dtemp;
adjtv.tv_usec = (u_int32)((dtemp - (double)adjtv.tv_sec) *
1e6 + .5);
} else {
adjtv.tv_sec = (int32)dtemp;
adjtv.tv_usec = (u_int32)((dtemp - (double)adjtv.tv_sec) *
1e6 + .5);
}
#if defined(HAVE_CLOCK_GETTIME) || defined(HAVE_GETCLOCK)
#ifdef HAVE_CLOCK_GETTIME
(void) clock_gettime(CLOCK_REALTIME, &ts);
#else
(void) getclock(TIMEOFDAY, &ts);
#endif
timetv.tv_sec = ts.tv_sec;
timetv.tv_usec = ts.tv_nsec / 1000;
#else /* not HAVE_GETCLOCK */
(void) GETTIMEOFDAY(&timetv, (struct timezone *)0);
#endif /* not HAVE_GETCLOCK */
oldtimetv = timetv;
#ifdef DEBUG
if (debug)
printf("step_systime: step %.6f residual %.6f\n", now, sys_residual);
#endif
if (isneg) {
timetv.tv_sec -= adjtv.tv_sec;
timetv.tv_usec -= adjtv.tv_usec;
if (timetv.tv_usec < 0) {
timetv.tv_sec--;
timetv.tv_usec += 1000000;
}
} else {
timetv.tv_sec += adjtv.tv_sec;
timetv.tv_usec += adjtv.tv_usec;
if (timetv.tv_usec >= 1000000) {
timetv.tv_sec++;
timetv.tv_usec -= 1000000;
}
}
if (ntp_set_tod(&timetv, (struct timezone *)0) != 0) {
msyslog(LOG_ERR, "Can't set time of day: %m");
return (0);
}
sys_residual = 0;
#ifdef NEED_HPUX_ADJTIME
/*
* CHECKME: is this correct when called by ntpdate?????
*/
_clear_adjtime();
#endif
/*
* FreeBSD, for example, has:
* struct utmp {
* char ut_line[UT_LINESIZE];
* char ut_name[UT_NAMESIZE];
* char ut_host[UT_HOSTSIZE];
* long ut_time;
* };
* and appends line="|", name="date", host="", time for the OLD
* and appends line="{", name="date", host="", time for the NEW
* to _PATH_WTMP .
*
* Some OSes have utmp, some have utmpx.
*/
/*
* Write old and new time entries in utmp and wtmp if step adjustment
* is greater than one second.
*
* This might become even Uglier...
*/
if (oldtimetv.tv_sec != timetv.tv_sec)
{
#ifdef HAVE_UTMP_H
struct utmp ut;
#endif
#ifdef HAVE_UTMPX_H
struct utmpx utx;
#endif
#ifdef HAVE_UTMP_H
memset((char *)&ut, 0, sizeof(ut));
#endif
#ifdef HAVE_UTMPX_H
memset((char *)&utx, 0, sizeof(utx));
#endif
/* UTMP */
#ifdef UPDATE_UTMP
# ifdef HAVE_PUTUTLINE
ut.ut_type = OLD_TIME;
(void)strcpy(ut.ut_line, OTIME_MSG);
ut.ut_time = oldtimetv.tv_sec;
pututline(&ut);
setutent();
ut.ut_type = NEW_TIME;
(void)strcpy(ut.ut_line, NTIME_MSG);
ut.ut_time = timetv.tv_sec;
pututline(&ut);
endutent();
# else /* not HAVE_PUTUTLINE */
# endif /* not HAVE_PUTUTLINE */
#endif /* UPDATE_UTMP */
/* UTMPX */
#ifdef UPDATE_UTMPX
# ifdef HAVE_PUTUTXLINE
utx.ut_type = OLD_TIME;
(void)strcpy(utx.ut_line, OTIME_MSG);
utx.ut_tv = oldtimetv;
pututxline(&utx);
setutxent();
utx.ut_type = NEW_TIME;
(void)strcpy(utx.ut_line, NTIME_MSG);
utx.ut_tv = timetv;
pututxline(&utx);
endutxent();
# else /* not HAVE_PUTUTXLINE */
# endif /* not HAVE_PUTUTXLINE */
#endif /* UPDATE_UTMPX */
/* WTMP */
#ifdef UPDATE_WTMP
# ifdef HAVE_PUTUTLINE
utmpname(WTMP_FILE);
ut.ut_type = OLD_TIME;
(void)strcpy(ut.ut_line, OTIME_MSG);
ut.ut_time = oldtimetv.tv_sec;
pututline(&ut);
ut.ut_type = NEW_TIME;
(void)strcpy(ut.ut_line, NTIME_MSG);
ut.ut_time = timetv.tv_sec;
pututline(&ut);
endutent();
# else /* not HAVE_PUTUTLINE */
# endif /* not HAVE_PUTUTLINE */
#endif /* UPDATE_WTMP */
/* WTMPX */
#ifdef UPDATE_WTMPX
# ifdef HAVE_PUTUTXLINE
utx.ut_type = OLD_TIME;
utx.ut_tv = oldtimetv;
(void)strcpy(utx.ut_line, OTIME_MSG);
# ifdef HAVE_UPDWTMPX
updwtmpx(WTMPX_FILE, &utx);
# else /* not HAVE_UPDWTMPX */
# endif /* not HAVE_UPDWTMPX */
# else /* not HAVE_PUTUTXLINE */
# endif /* not HAVE_PUTUTXLINE */
# ifdef HAVE_PUTUTXLINE
utx.ut_type = NEW_TIME;
utx.ut_tv = timetv;
(void)strcpy(utx.ut_line, NTIME_MSG);
# ifdef HAVE_UPDWTMPX
updwtmpx(WTMPX_FILE, &utx);
# else /* not HAVE_UPDWTMPX */
# endif /* not HAVE_UPDWTMPX */
# else /* not HAVE_PUTUTXLINE */
# endif /* not HAVE_PUTUTXLINE */
#endif /* UPDATE_WTMPX */
}
return (1);
}