static void __init omap4_panda_init(void)
{
int package = OMAP_PACKAGE_CBS;
omap_emif_setup_device_details(&emif_devices, &emif_devices);
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, NULL, package);
if (wl12xx_set_platform_data(&omap_panda_wlan_data))
pr_err("error setting wl12xx data\n");
omap4_panda_i2c_init();
omap4_audio_conf();
platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
/*
* This is temporaray. With WLAN regsitering, we see that UART2 is not
* idling on panda and CORE RET is not happening. So removing this FTM.
* Later will be enabled.
*
* platform_device_register(&omap_vwlan_device);
*/
board_serial_init();
omap4_twl6030_hsmmc_init(mmc);
omap4_ehci_init();
usb_musb_init(&musb_board_data);
omap_dmm_init();
omap4_panda_display_init();
}
static void __init omap_tablet_init(void)
{
int status;
int package = OMAP_PACKAGE_CBS;
int tablet_rev = 0;
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, NULL, package);
omap_emif_setup_device_details(&emif_devices, &emif_devices);
omap_board_config = tablet_config;
omap_board_config_size = ARRAY_SIZE(tablet_config);
tablet_rev = omap_init_board_version(0);
omap4_create_board_props();
omap4_audio_conf();
omap4_i2c_init();
tablet_touch_init();
tablet_camera_mux_init();
omap_dmm_init();
tablet_panel_init();
tablet_pmic_mux_init();
tablet_set_osc_timings();
tablet_button_init();
omap4_register_ion();
board_serial_init();
omap4_tablet_wifi_init();
omap4_twl6030_hsmmc_init(mmc);
tablet_sensor_init();
platform_add_devices(tablet4430_devices,
ARRAY_SIZE(tablet4430_devices));
wake_lock_init(&st_wk_lock, WAKE_LOCK_SUSPEND, "st_wake_lock");
omap4_ehci_ohci_init();
usb_musb_init(&musb_board_data);
status = omap_ethernet_init();
if (status) {
pr_err("Ethernet initialization failed: %d\n", status);
} else {
tablet_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
spi_register_board_info(tablet_spi_board_info,
ARRAY_SIZE(tablet_spi_board_info));
}
if (cpu_is_omap446x()) {
/* Vsel0 = gpio, vsel1 = gnd */
status = omap_tps6236x_board_setup(true, TPS62361_GPIO, -1,
OMAP_PIN_OFF_OUTPUT_HIGH, -1);
if (status)
pr_err("TPS62361 initialization failed: %d\n", status);
}
omap_enable_smartreflex_on_init();
if (enable_suspend_off)
omap_pm_enable_off_mode();
}
void __init omap_ovation_init(void)
{
int package = OMAP_PACKAGE_CBS;
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, NULL, package);
/* Turn off the external FET for twl6032 charger */
gpio_request ( EXT_FET_EN , "EXT-FET-EN" );
gpio_direction_output ( EXT_FET_EN , 0 );
/* EVT1a bringup only */
if (system_rev == OVATION_EVT1A) {
/* The GPIO for Charging level - 1=2A, 0=1A */
gpio_request(44, "ic_chg_level");
gpio_direction_output(44, 1);
}
ovation_mem_init();
omap_board_config = ovation_config;
omap_board_config_size = ARRAY_SIZE(ovation_config);
omap4_create_board_props();
omap4_audio_conf();
omap4_i2c_init();
ovation_lcd_touch_init();
ovation_touch_init();
omap_dmm_init();
ovation_panel_init();
ovation_pmic_mux_init();
ovation_button_init();
kxtj9_dev_init();
omap4_register_ion();
board_serial_init();
bn_wilink_init();
omap4_twl6030_hsmmc_init(mmc);
usb_musb_init(&musb_board_data);
omap_enable_smartreflex_on_init();
if (enable_suspend_off)
omap_pm_enable_off_mode();
/* Enable GG bat_low irq to wake up device to inform framework to shutdown. */
omap_mux_init_gpio(BQ27500_BAT_LOW_GPIO, OMAP_PIN_INPUT | OMAP_PIN_OFF_WAKEUPENABLE);
}
static void __init omap_4430sdp_init(void)
{
int status;
int package = OMAP_PACKAGE_CBS;
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, NULL, package);
if (cpu_is_omap447x())
omap_emif_setup_device_details(&emif_devices_4470,
&emif_devices_4470);
else
omap_emif_setup_device_details(&emif_devices, &emif_devices);
omap_board_config = sdp4430_config;
omap_board_config_size = ARRAY_SIZE(sdp4430_config);
omap_init_board_version(0);
omap4_audio_conf();
omap4_create_board_props();
blaze_pmic_mux_init();
blaze_set_osc_timings();
omap4_i2c_init();
blaze_sensor_init();
blaze_touch_init();
omap4_register_ion();
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
wake_lock_init(&st_wk_lock, WAKE_LOCK_SUSPEND, "st_wake_lock");
board_serial_init();
omap4_sdp4430_wifi_init();
omap4_twl6030_hsmmc_init(mmc);
/* blaze_modem_init shall be called before omap4_ehci_ohci_init */
if (!strcmp(modem_ipc, "hsi"))
blaze_modem_init(true);
else
blaze_modem_init(false);
omap4_ehci_ohci_init();
usb_musb_init(&musb_board_data);
status = omap_ethernet_init();
if (status) {
pr_err("Ethernet initialization failed: %d\n", status);
} else {
sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
spi_register_board_info(sdp4430_spi_board_info,
ARRAY_SIZE(sdp4430_spi_board_info));
}
status = omap4_keyboard_init(&sdp4430_keypad_data);
if (status)
pr_err("Keypad initialization failed: %d\n", status);
omap_dmm_init();
omap_4430sdp_display_init();
blaze_panel_init();
blaze_keypad_init();
init_duty_governor();
if (cpu_is_omap446x()) {
/* Vsel0 = gpio, vsel1 = gnd */
status = omap_tps6236x_board_setup(true, TPS62361_GPIO, -1,
OMAP_PIN_OFF_OUTPUT_HIGH, -1);
if (status)
pr_err("TPS62361 initialization failed: %d\n", status);
}
omap_enable_smartreflex_on_init();
if (enable_suspend_off)
omap_pm_enable_off_mode();
}
