SXRMBEXAFSScanConfigurationView::SXRMBEXAFSScanConfigurationView(SXRMBEXAFSScanConfiguration *configuration, QWidget *parent) :
SXRMBScanConfigurationView(parent)
{
SXRMBBeamline *sxrmbBL = SXRMBBeamline::sxrmb();
configuration_ = configuration;
regionsView_ = new AMEXAFSScanAxisView("SXRMB Region Configuration", configuration_);
autoRegionButton_ = new QPushButton("Auto Set XANES Regions");
connect(autoRegionButton_, SIGNAL(clicked()), this, SLOT(setupDefaultXANESScanRegions()));
pseudoXAFSButton_ = new QPushButton("Auto Set EXAFS Regions");
connect(pseudoXAFSButton_, SIGNAL(clicked()), this, SLOT(setupDefaultEXAFSScanRegions()));
// Energy (Eo) selection
energy_ = new QDoubleSpinBox;
energy_->setSuffix(" eV");
energy_->setMinimum(0);
energy_->setMaximum(10000);
connect(energy_, SIGNAL(editingFinished()), this, SLOT(setEnergy()));
elementChoice_ = new QToolButton;
connect(elementChoice_, SIGNAL(clicked()), this, SLOT(onElementChoiceClicked()));
lineChoice_ = new QComboBox;
connect(lineChoice_, SIGNAL(currentIndexChanged(int)), this, SLOT(onLinesComboBoxIndexChanged(int)));
if (configuration_->edge().isEmpty()){
elementChoice_->setText("Cl");
fillLinesComboBox(AMPeriodicTable::table()->elementBySymbol("Cl"));
lineChoice_->setCurrentIndex(0);
}
// Resets the view for the view to what it should be. Using the saved for the energy in case it is different from the original line energy.
else {
elementChoice_->setText(configuration_->edge().split(" ").first());
lineChoice_->blockSignals(true);
fillLinesComboBox(AMPeriodicTable::table()->elementBySymbol(elementChoice_->text()));
lineChoice_->setCurrentIndex(lineChoice_->findText(configuration_->edge(), Qt::MatchStartsWith | Qt::MatchCaseSensitive));
lineChoice_->blockSignals(false);
energy_->setValue(configuration_->energy());
}
connect(configuration_, SIGNAL(edgeChanged(QString)), this, SLOT(onEdgeChanged()));
QFormLayout *energySetpointLayout = new QFormLayout;
energySetpointLayout->addRow("Energy:", energy_);
QHBoxLayout *energyLayout = new QHBoxLayout;
energyLayout->addLayout(energySetpointLayout);
energyLayout->addWidget(elementChoice_);
energyLayout->addWidget(lineChoice_);
QHBoxLayout *regionsHL = new QHBoxLayout();
regionsHL->addStretch();
regionsHL->addWidget(autoRegionButton_);
regionsHL->addWidget(pseudoXAFSButton_);
QVBoxLayout *scanRegionConfigurationBoxLayout = new QVBoxLayout;
scanRegionConfigurationBoxLayout->addLayout(energyLayout);
scanRegionConfigurationBoxLayout->addWidget(regionsView_);
scanRegionConfigurationBoxLayout->addLayout(regionsHL);
QGroupBox *scanRegionConfigurationGroupBox = new QGroupBox("Scan Region Configuration");
scanRegionConfigurationGroupBox->setLayout(scanRegionConfigurationBoxLayout);
// Scan information: scan name selection
scanName_ = new QLineEdit(configuration_->userScanName());
scanName_->setAlignment(Qt::AlignCenter);
connect(scanName_, SIGNAL(editingFinished()), this, SLOT(onScanNameEdited()));
connect(configuration_, SIGNAL(nameChanged(QString)), scanName_, SLOT(setText(QString)));
onScanNameEdited();
QFormLayout *scanNameLayout = new QFormLayout;
scanNameLayout->addRow("Scan Name:", scanName_);
// Scan information: the estimated scan time.
estimatedTime_ = new QLabel;
connect(configuration_, SIGNAL(totalTimeChanged(double)), this, SLOT(onEstimatedTimeChanged()));
onEstimatedTimeChanged();
QVBoxLayout *scanInfoBoxLayout = new QVBoxLayout;
scanInfoBoxLayout->addLayout(scanNameLayout);
scanInfoBoxLayout->addWidget(estimatedTime_);
QGroupBox *scanInfoGroupBox = new QGroupBox("Scan Information");
scanInfoGroupBox->setLayout(scanInfoBoxLayout);
// Beamline setting layout
QGroupBox *beamlineSettingsGroupBox = createAndLayoutBeamlineSettings();
// Bruker detector setting
QGroupBox *detectorSettingGroupBox = createAndLayoutDetectorSettings(configuration_);
// layout the contents
QGridLayout *contentLayout = new QGridLayout();
contentLayout->addWidget(scanRegionConfigurationGroupBox, 0, 0, 1, 1);
contentLayout->addWidget(scanInfoGroupBox, 1, 0, 1, 1);
contentLayout->addWidget(beamlineSettingsGroupBox, 0, 4, 1, 1);
contentLayout->addWidget(detectorSettingGroupBox, 1, 4, 1, 1);
contentLayout->setContentsMargins(20,0,0,20);
contentLayout->setSpacing(1);
setLayout(contentLayout);
connect(configuration_->dbObject(), SIGNAL(xChanged(double)), this, SLOT(onScanConfigurationSampleStageXChanged(double)));
connect(configuration_->dbObject(), SIGNAL(zChanged(double)), this, SLOT(onScanConfigurationSampleStageZChanged(double)));
connect(configuration_->dbObject(), SIGNAL(yChanged(double)), this, SLOT(onScanConfigurationNormalChanged(double)));
connect(configuration_->dbObject(), SIGNAL(rotationChanged(double)), this, SLOT(onScanConfigurationRotationChanged(double)));
connect(sxrmbBL, SIGNAL(endstationChanged(SXRMB::Endstation, SXRMB::Endstation)), this, SLOT(onBeamlineEndstationChanged(SXRMB::Endstation, SXRMB::Endstation)));
if(sxrmbBL->isConnected())
updateBeamlineSettingWarning();
}
VESPERSEXAFSScanConfigurationView::VESPERSEXAFSScanConfigurationView(VESPERSEXAFSScanConfiguration *config, QWidget *parent)
: VESPERSScanConfigurationView(parent)
{
config_ = config;
AMTopFrame *frame = new AMTopFrame("VESPERS EXAFS Configuration");
// Regions setup
regionsView_ = new AMRegionsView(config_->regions());
regionsView_->setMinimumWidth(300);
regionsLineView_ = new AMEXAFSLineView(config_->exafsRegions());
// The fluorescence detector setup
QGroupBox *fluorescenceDetectorGroupBox = addFluorescenceDetectorSelectionView();
connect(fluorescenceButtonGroup_, SIGNAL(buttonClicked(int)), this, SLOT(onFluorescenceChoiceChanged(int)));
connect(config_->dbObject(), SIGNAL(fluorescenceDetectorChanged(int)), this, SLOT(updateFluorescenceDetector(int)));
fluorescenceButtonGroup_->button((int)config_->fluorescenceDetector())->setChecked(true);
// Ion chamber selection
QGroupBox *ItGroupBox = addItSelectionView();
connect(ItGroup_, SIGNAL(buttonClicked(int)), this, SLOT(onItClicked(int)));
connect(config_->dbObject(), SIGNAL(transmissionChoiceChanged(int)), this, SLOT(updateItButtons(int)));
QGroupBox *I0GroupBox = addI0SelectionView();
connect(I0Group_, SIGNAL(buttonClicked(int)), this, SLOT(onI0Clicked(int)));
connect(config_->dbObject(), SIGNAL(incomingChoiceChanged(int)), this, SLOT(updateI0Buttons(int)));
I0Group_->button((int)config_->incomingChoice())->click();
ItGroup_->button((int)config_->transmissionChoice())->click();
QHBoxLayout *ionChambersLayout = new QHBoxLayout;
ionChambersLayout->addWidget(I0GroupBox);
ionChambersLayout->addWidget(ItGroupBox);
// Scan name selection
scanName_ = addScanNameView(config_->name());
connect(scanName_, SIGNAL(editingFinished()), this, SLOT(onScanNameEdited()));
connect(config_, SIGNAL(nameChanged(QString)), scanName_, SLOT(setText(QString)));
onScanNameEdited();
QFormLayout *scanNameLayout = new QFormLayout;
scanNameLayout->addRow("Scan Name:", scanName_);
// Energy (Eo) selection
energy_ = new QDoubleSpinBox;
energy_->setSuffix(" eV");
energy_->setMinimum(0);
energy_->setMaximum(30000);
connect(energy_, SIGNAL(editingFinished()), this, SLOT(setEnergy()));
elementChoice_ = new QToolButton;
connect(elementChoice_, SIGNAL(clicked()), this, SLOT(onElementChoiceClicked()));
lineChoice_ = new QComboBox;
connect(lineChoice_, SIGNAL(currentIndexChanged(int)), this, SLOT(onLinesComboBoxIndexChanged(int)));
if (config_->edge().isEmpty()){
elementChoice_->setText("Cu");
fillLinesComboBox(AMPeriodicTable::table()->elementBySymbol("Cu"));
lineChoice_->setCurrentIndex(0);
}
// Resets the view for the view to what it should be. Using the saved for the energy in case it is different from the original line energy.
else
onEdgeChanged();
connect(config_, SIGNAL(edgeChanged(QString)), this, SLOT(onEdgeChanged()));
QCheckBox *useFixedTime = new QCheckBox("Use fixed time (EXAFS)");
useFixedTime->setEnabled(config_->useFixedTime());
connect(config_->exafsRegions(), SIGNAL(regionsHaveKSpaceChanged(bool)), useFixedTime, SLOT(setEnabled(bool)));
connect(useFixedTime, SIGNAL(toggled(bool)), config_, SLOT(setUseFixedTime(bool)));
QSpinBox *numberOfScans = new QSpinBox;
numberOfScans->setMinimum(1);
numberOfScans->setValue(config_->numberOfScans());
numberOfScans->setAlignment(Qt::AlignCenter);
connect(numberOfScans, SIGNAL(valueChanged(int)), config_, SLOT(setNumberOfScans(int)));
connect(config_, SIGNAL(numberOfScansChanged(int)), this, SLOT(onEstimatedTimeChanged()));
QFormLayout *numberOfScansLayout = new QFormLayout;
numberOfScansLayout->addRow("Number of Scans:", numberOfScans);
QFormLayout *energySetpointLayout = new QFormLayout;
energySetpointLayout->addRow("Energy:", energy_);
QHBoxLayout *energyLayout = new QHBoxLayout;
energyLayout->addLayout(energySetpointLayout);
energyLayout->addWidget(elementChoice_);
energyLayout->addWidget(lineChoice_);
// Setting the scan position.
QGroupBox *goToPositionGroupBox = addGoToPositionView(config_->goToPosition(), config_->x(), config_->y());
connect(config_, SIGNAL(gotoPositionChanged(bool)), goToPositionCheckBox_, SLOT(setChecked(bool)));
connect(goToPositionCheckBox_, SIGNAL(toggled(bool)), config_, SLOT(setGoToPosition(bool)));
connect(goToPositionCheckBox_, SIGNAL(toggled(bool)), setCurrentPositionButton_, SLOT(setEnabled(bool)));
connect(goToPositionCheckBox_, SIGNAL(toggled(bool)), savedXPosition_, SLOT(setEnabled(bool)));
connect(goToPositionCheckBox_, SIGNAL(toggled(bool)), savedYPosition_, SLOT(setEnabled(bool)));
connect(goToPositionCheckBox_, SIGNAL(toggled(bool)), positionsSaved_, SLOT(setEnabled(bool)));
connect(setCurrentPositionButton_, SIGNAL(clicked()), this, SLOT(setScanPosition()));
setSampleStage(VESPERSBeamline::vespers()->experimentConfiguration()->sampleStageChoice());
// The estimated scan time.
estimatedTime_ = new QLabel;
estimatedSetTime_ = new QLabel;
connect(config_, SIGNAL(totalTimeChanged(double)), this, SLOT(onEstimatedTimeChanged()));
onEstimatedTimeChanged();
// The roi text edit.
roiText_ = new QTextEdit;
roiText_->setReadOnly(true);
QPushButton *configureXRFDetectorButton = new QPushButton(QIcon(":/hammer-wrench.png"), "Configure XRF Detector");
connect(configureXRFDetectorButton, SIGNAL(clicked()), this, SLOT(onConfigureXRFDetectorClicked()));
QFormLayout *roiTextLayout = new QFormLayout;
roiTextLayout->addRow(roiText_);
roiTextLayout->addRow(configureXRFDetectorButton);
roiTextBox_ = new QGroupBox("Regions Of Interest");
roiTextBox_->setLayout(roiTextLayout);
roiTextBox_->setVisible(config_->fluorescenceDetector() == VESPERS::NoXRF ? false : true);
// Label showing where the data will be saved.
QLabel *exportPath = addExportPathLabel();
// Label with a help message for EXAFS.
QLabel *helpMessage = new QLabel("Note when using EXAFS: when using variable integration time, the time column is the maximum time.");
// Default XANES and EXAFS buttons.
QPushButton *defaultXANESButton = new QPushButton("Default XANES");
connect(defaultXANESButton, SIGNAL(clicked()), this, SLOT(onDefaultXANESScanClicked()));
QPushButton *defaultEXAFSButton = new QPushButton("Default EXAFS");
connect(defaultEXAFSButton, SIGNAL(clicked()), this, SLOT(onDefaultEXAFSScanClicked()));
// Setting up the steps to show the time offset for scan time estimation.
connect(this, SIGNAL(customContextMenuRequested(QPoint)), this, SLOT(onCustomContextMenuRequested(QPoint)));
setContextMenuPolicy(Qt::CustomContextMenu);
QGroupBox *timeOffsetBox = addTimeOffsetLabel(config_->timeOffset());
connect(timeOffset_, SIGNAL(valueChanged(double)), this, SLOT(setTimeOffset(double)));
QVBoxLayout *defaultLayout = new QVBoxLayout;
defaultLayout->addSpacing(35);
defaultLayout->addWidget(defaultXANESButton);
defaultLayout->addWidget(defaultEXAFSButton);
defaultLayout->addStretch();
// Auto-export option.
QGroupBox *autoExportGroupBox = addExporterOptionsView(QStringList(), config_->exportSpectraSources());
connect(autoExportSpectra_, SIGNAL(toggled(bool)), config_, SLOT(setExportSpectraSources(bool)));
// Setting up the layout.
QGridLayout *contentsLayout = new QGridLayout;
contentsLayout->addWidget(regionsView_, 1, 1, 2, 2);
contentsLayout->addWidget(fluorescenceDetectorGroupBox, 1, 3);
contentsLayout->addLayout(scanNameLayout, 4, 1);
contentsLayout->addLayout(energyLayout, 0, 1, 1, 3);
contentsLayout->addWidget(goToPositionGroupBox, 4, 3, 4, 1);
contentsLayout->addLayout(ionChambersLayout, 2, 3, 2, 1);
contentsLayout->addWidget(roiTextBox_, 1, 4, 2, 2);
contentsLayout->addWidget(useFixedTime, 3, 1);
contentsLayout->addWidget(estimatedTime_, 6, 1, 1, 2);
contentsLayout->addWidget(estimatedSetTime_, 7, 1, 1, 2);
contentsLayout->addLayout(numberOfScansLayout, 5, 1);
contentsLayout->addWidget(timeOffsetBox, 8, 1, 1, 2);
contentsLayout->addWidget(autoExportGroupBox, 4, 5, 2, 3);
QHBoxLayout *squeezeContents = new QHBoxLayout;
squeezeContents->addStretch();
squeezeContents->addLayout(defaultLayout);
squeezeContents->addLayout(contentsLayout);
squeezeContents->addStretch();
QVBoxLayout *configViewLayout = new QVBoxLayout;
configViewLayout->addWidget(frame);
configViewLayout->addStretch();
configViewLayout->addWidget(regionsLineView_, 0, Qt::AlignCenter);
configViewLayout->addSpacing(30);
configViewLayout->addLayout(squeezeContents);
configViewLayout->addSpacing(30);
configViewLayout->addWidget(exportPath, 0, Qt::AlignCenter);
configViewLayout->addSpacing(30);
configViewLayout->addWidget(helpMessage, 0, Qt::AlignCenter);
configViewLayout->addStretch();
setLayout(configViewLayout);
}
VESPERSEXAFSScanConfigurationView::VESPERSEXAFSScanConfigurationView(VESPERSEXAFSScanConfiguration *config, QWidget *parent)
: VESPERSScanConfigurationView(parent)
{
configuration_ = config;
AMTopFrame *frame = new AMTopFrame("VESPERS EXAFS Configuration");
// Regions setup
regionsView_ = new AMEXAFSScanAxisView("", configuration_);
QVBoxLayout *regionsViewLayout = new QVBoxLayout;
regionsViewLayout->addWidget(regionsView_);
QGroupBox *regionsViewGroupBox = new QGroupBox("Regions Setup");
regionsViewGroupBox->setLayout(regionsViewLayout);
// The fluorescence detector setup
fluorescenceDetectorComboBox_ = createFluorescenceComboBox();
connect(fluorescenceDetectorComboBox_, SIGNAL(currentIndexChanged(int)), this, SLOT(onFluorescenceChoiceChanged(int)));
connect(configuration_->dbObject(), SIGNAL(fluorescenceDetectorChanged(int)), this, SLOT(updateFluorescenceDetectorComboBox(int)));
fluorescenceDetectorComboBox_->setCurrentIndex((int)configuration_->fluorescenceDetector());
// Ion chamber selection
itComboBox_ = createIonChamberComboBox();
connect(itComboBox_, SIGNAL(currentIndexChanged(int)), this, SLOT(onItClicked(int)));
connect(configuration_->dbObject(), SIGNAL(transmissionChoiceChanged(int)), this, SLOT(updateItComboBox(int)));
i0ComboBox_ = createIonChamberComboBox();
connect(i0ComboBox_, SIGNAL(currentIndexChanged(int)), this, SLOT(onI0Clicked(int)));
connect(configuration_->dbObject(), SIGNAL(incomingChoiceChanged(int)), this, SLOT(updateI0ComboBox(int)));
QHBoxLayout *ionChambersLayout = new QHBoxLayout;
ionChambersLayout->addWidget(i0ComboBox_);
ionChambersLayout->addWidget(itComboBox_);
// Scan name selection
scanName_ = createScanNameView(configuration_->name());
connect(scanName_, SIGNAL(editingFinished()), this, SLOT(onScanNameEdited()));
connect(configuration_, SIGNAL(nameChanged(QString)), scanName_, SLOT(setText(QString)));
onScanNameEdited();
// The estimated scan time.
estimatedTime_ = new QLabel;
connect(configuration_, SIGNAL(totalTimeChanged(double)), this, SLOT(onEstimatedTimeChanged()));
onEstimatedTimeChanged();
QFormLayout *scanNameLayout = new QFormLayout;
scanNameLayout->addRow("Scan Name:", scanName_);
scanNameLayout->addRow(estimatedTime_);
QGroupBox *scanNameGroupBox = new QGroupBox("Scan Name");
scanNameGroupBox->setLayout(scanNameLayout);
// Energy (Eo) selection
energy_ = new QDoubleSpinBox;
energy_->setSuffix(" eV");
energy_->setMinimum(0);
energy_->setMaximum(30000);
connect(energy_, SIGNAL(editingFinished()), this, SLOT(setEnergy()));
elementChoice_ = new QToolButton;
connect(elementChoice_, SIGNAL(clicked()), this, SLOT(onElementChoiceClicked()));
lineChoice_ = new QComboBox;
connect(lineChoice_, SIGNAL(currentIndexChanged(int)), this, SLOT(onLinesComboBoxIndexChanged(int)));
if (configuration_->edge().isEmpty()){
elementChoice_->setText("Cu");
fillLinesComboBox(AMPeriodicTable::table()->elementBySymbol("Cu"));
lineChoice_->setCurrentIndex(0);
}
// Resets the view for the view to what it should be. Using the saved for the energy in case it is different from the original line energy.
else
onEdgeChanged();
connect(configuration_, SIGNAL(edgeChanged(QString)), this, SLOT(onEdgeChanged()));
QFormLayout *energySetpointLayout = new QFormLayout;
energySetpointLayout->addRow("Energy:", energy_);
QHBoxLayout *energyLayout = new QHBoxLayout;
energyLayout->addLayout(energySetpointLayout);
energyLayout->addWidget(elementChoice_);
energyLayout->addWidget(lineChoice_);
// Setting the scan position.
QGroupBox *goToPositionGroupBox = addGoToPositionView(configuration_->goToPosition(), configuration_->x(), configuration_->y());
connect(configuration_, SIGNAL(gotoPositionChanged(bool)), goToPositionCheckBox_, SLOT(setChecked(bool)));
connect(goToPositionCheckBox_, SIGNAL(toggled(bool)), configuration_, SLOT(setGoToPosition(bool)));
connect(goToPositionCheckBox_, SIGNAL(toggled(bool)), setCurrentPositionButton_, SLOT(setEnabled(bool)));
connect(goToPositionCheckBox_, SIGNAL(toggled(bool)), savedXPosition_, SLOT(setEnabled(bool)));
connect(goToPositionCheckBox_, SIGNAL(toggled(bool)), savedYPosition_, SLOT(setEnabled(bool)));
connect(goToPositionCheckBox_, SIGNAL(toggled(bool)), positionsSaved_, SLOT(setEnabled(bool)));
connect(setCurrentPositionButton_, SIGNAL(clicked()), this, SLOT(setScanPosition()));
connect(configuration_->dbObject(), SIGNAL(motorChanged(int)), this, SLOT(onMotorsUpdated(int)));
onMotorsUpdated(configuration_->motor());
// Label showing where the data will be saved.
QLabel *exportPath = addExportPathLabel();
// Default XANES and EXAFS buttons.
QPushButton *defaultXANESButton = new QPushButton("Default XANES");
connect(defaultXANESButton, SIGNAL(clicked()), this, SLOT(setupDefaultXANESScanRegions()));
QPushButton *defaultEXAFSButton = new QPushButton("Default EXAFS");
connect(defaultEXAFSButton, SIGNAL(clicked()), this, SLOT(setupDefaultEXAFSScanRegions()));
// Setting up the steps to show the time offset for scan time estimation.
connect(this, SIGNAL(customContextMenuRequested(QPoint)), this, SLOT(onCustomContextMenuRequested(QPoint)));
setContextMenuPolicy(Qt::CustomContextMenu);
QGroupBox *timeOffsetBox = addTimeOffsetLabel(configuration_->timeOffset());
connect(timeOffset_, SIGNAL(valueChanged(double)), this, SLOT(setTimeOffset(double)));
// Auto-export option.
QGroupBox *autoExportGroupBox = addExporterOptionsView(QStringList(), configuration_->exportSpectraSources(), configuration_->exportSpectraInRows());
connect(autoExportSpectra_, SIGNAL(toggled(bool)), configuration_, SLOT(setExportSpectraSources(bool)));
connect(autoExportSpectra_, SIGNAL(toggled(bool)), exportSpectraInRows_, SLOT(setEnabled(bool)));
connect(exportSpectraInRows_, SIGNAL(toggled(bool)), this, SLOT(updateExportSpectraInRows(bool)));
fluorescenceDetectorComboBox_->setCurrentIndex((int)configuration_->fluorescenceDetector());
i0ComboBox_->setCurrentIndex((int)configuration_->incomingChoice());
itComboBox_->setCurrentIndex((int)configuration_->transmissionChoice());
disableStandardI0Options();
disableStandardItOptions();
QVBoxLayout *defaultLayout = new QVBoxLayout;
defaultLayout->addSpacing(35);
defaultLayout->addWidget(defaultXANESButton);
defaultLayout->addWidget(defaultEXAFSButton);
defaultLayout->addStretch();
QFormLayout *detectorLayout = new QFormLayout;
detectorLayout->addRow("XRF:", fluorescenceDetectorComboBox_);
detectorLayout->addRow("I0:", i0ComboBox_);
detectorLayout->addRow("It:", itComboBox_);
QGroupBox *detectorGroupBox = new QGroupBox("Detectors");
detectorGroupBox->setLayout(detectorLayout);
QGroupBox *afterScanBox = createAfterScanOptionsBox(configuration_->closeFastShutter(), configuration_->returnToOriginalPosition(), configuration_->cleanupScaler());
connect(closeFastShutterCheckBox_, SIGNAL(toggled(bool)), this, SLOT(setCloseFastShutter(bool)));
// connect(goToPositionCheckBox_, SIGNAL(toggled(bool)), this, SLOT(setReturnToOriginalPosition(bool)));
connect(cleanupScalerCheckBox_, SIGNAL(toggled(bool)), this, SLOT(setCleanupScaler(bool)));
goToPositionCheckBox_->setDisabled(true);
// Setting up the layout.
QGridLayout *contentsLayout = new QGridLayout;
contentsLayout->addLayout(energyLayout, 0, 0, 1, 3);
contentsLayout->addWidget(regionsViewGroupBox, 1, 0, 2, 3);
contentsLayout->addWidget(scanNameGroupBox, 3, 0, 1, 2);
contentsLayout->addWidget(goToPositionGroupBox, 4, 0, 1, 1);
contentsLayout->addWidget(timeOffsetBox, 5, 0, 1, 1);
contentsLayout->addWidget(detectorGroupBox, 3, 2, 1, 1);
contentsLayout->addWidget(autoExportGroupBox, 4, 1, 1, 2);
contentsLayout->addWidget(afterScanBox, 5, 2, 1, 1);
QHBoxLayout *squeezeContents = new QHBoxLayout;
squeezeContents->addStretch();
squeezeContents->addLayout(defaultLayout);
squeezeContents->addLayout(contentsLayout);
squeezeContents->addStretch();
QVBoxLayout *configViewLayout = new QVBoxLayout;
configViewLayout->addWidget(frame);
configViewLayout->addStretch();
configViewLayout->addSpacing(30);
configViewLayout->addLayout(squeezeContents);
configViewLayout->addSpacing(30);
configViewLayout->addWidget(exportPath, 0, Qt::AlignCenter);
configViewLayout->addStretch();
setLayout(configViewLayout);
}
