ConfigServoWidget::ConfigServoWidget(QWidget *parent) : ConfigTaskWidget(parent)
{
m_config = new Ui_SettingsWidget();
m_config->setupUi(this);
ExtensionSystem::PluginManager *pm = ExtensionSystem::PluginManager::instance();
UAVObjectManager *objManager = pm->getObject<UAVObjectManager>();
// First of all, put all the channel widgets into lists, so that we can
// manipulate those:
// NOTE: for historical reasons, we have objects below called ch0 to ch7, but the convention for OP is Channel 1 to Channel 8.
outLabels << m_config->ch0OutValue
<< m_config->ch1OutValue
<< m_config->ch2OutValue
<< m_config->ch3OutValue
<< m_config->ch4OutValue
<< m_config->ch5OutValue
<< m_config->ch6OutValue
<< m_config->ch7OutValue;
outSliders << m_config->ch0OutSlider
<< m_config->ch1OutSlider
<< m_config->ch2OutSlider
<< m_config->ch3OutSlider
<< m_config->ch4OutSlider
<< m_config->ch5OutSlider
<< m_config->ch6OutSlider
<< m_config->ch7OutSlider;
outMin << m_config->ch0OutMin
<< m_config->ch1OutMin
<< m_config->ch2OutMin
<< m_config->ch3OutMin
<< m_config->ch4OutMin
<< m_config->ch5OutMin
<< m_config->ch6OutMin
<< m_config->ch7OutMin;
outMax << m_config->ch0OutMax
<< m_config->ch1OutMax
<< m_config->ch2OutMax
<< m_config->ch3OutMax
<< m_config->ch4OutMax
<< m_config->ch5OutMax
<< m_config->ch6OutMax
<< m_config->ch7OutMax;
reversals << m_config->ch0Rev
<< m_config->ch1Rev
<< m_config->ch2Rev
<< m_config->ch3Rev
<< m_config->ch4Rev
<< m_config->ch5Rev
<< m_config->ch6Rev
<< m_config->ch7Rev;
inMaxLabels << m_config->ch0Max
<< m_config->ch1Max
<< m_config->ch2Max
<< m_config->ch3Max
<< m_config->ch4Max
<< m_config->ch5Max
<< m_config->ch6Max
<< m_config->ch7Max;
inMinLabels << m_config->ch0Min
<< m_config->ch1Min
<< m_config->ch2Min
<< m_config->ch3Min
<< m_config->ch4Min
<< m_config->ch5Min
<< m_config->ch6Min
<< m_config->ch7Min;
inNeuLabels << m_config->ch0Cur
<< m_config->ch1Cur
<< m_config->ch2Cur
<< m_config->ch3Cur
<< m_config->ch4Cur
<< m_config->ch5Cur
<< m_config->ch6Cur
<< m_config->ch7Cur;
inSliders << m_config->inSlider0
<< m_config->inSlider1
<< m_config->inSlider2
<< m_config->inSlider3
<< m_config->inSlider4
<< m_config->inSlider5
<< m_config->inSlider6
<< m_config->inSlider7;
// Now connect the widget to the ManualControlCommand / Channel UAVObject
UAVDataObject* obj = dynamic_cast<UAVDataObject*>(objManager->getObject(QString("ManualControlCommand")));
connect(obj, SIGNAL(objectUpdated(UAVObject*)), this, SLOT(updateChannels(UAVObject*)));
// Get the receiver types supported by OpenPilot and fill the corresponding
// dropdown menu:
obj = dynamic_cast<UAVDataObject*>(objManager->getObject(QString("ManualControlSettings")));
QString fieldName = QString("InputMode");
UAVObjectField *field = obj->getField(fieldName);
m_config->receiverType->addItems(field->getOptions());
m_config->receiverType->setDisabled(true); // This option does not work for now, it is a compile-time option.
// Fill in the dropdown menus for the channel RC Input assignement.
QStringList channelsList;
channelsList << "None";
QList<UAVObjectField*> fieldList = obj->getFields();
foreach (UAVObjectField* field, fieldList) {
if (field->getUnits().contains("channel")) {
channelsList.append(field->getName());
}
}
m_config->ch0Assign->addItems(channelsList);
m_config->ch1Assign->addItems(channelsList);
m_config->ch2Assign->addItems(channelsList);
m_config->ch3Assign->addItems(channelsList);
m_config->ch4Assign->addItems(channelsList);
m_config->ch5Assign->addItems(channelsList);
m_config->ch6Assign->addItems(channelsList);
m_config->ch7Assign->addItems(channelsList);
// And for the channel output assignement options
m_config->ch0Output->addItem("None");
m_config->ch1Output->addItem("None");
m_config->ch2Output->addItem("None");
m_config->ch3Output->addItem("None");
m_config->ch4Output->addItem("None");
m_config->ch5Output->addItem("None");
m_config->ch6Output->addItem("None");
m_config->ch7Output->addItem("None");
// And the flight mode settings:
field = obj->getField(QString("FlightModePosition"));
m_config->fmsModePos1->addItems(field->getOptions());
m_config->fmsModePos2->addItems(field->getOptions());
m_config->fmsModePos3->addItems(field->getOptions());
field = obj->getField(QString("Stabilization1Settings"));
channelsList.clear();
channelsList.append(field->getOptions());
m_config->fmsSsPos1Roll->addItems(channelsList);
m_config->fmsSsPos1Pitch->addItems(channelsList);
m_config->fmsSsPos1Yaw->addItems(channelsList);
m_config->fmsSsPos2Roll->addItems(channelsList);
m_config->fmsSsPos2Pitch->addItems(channelsList);
m_config->fmsSsPos2Yaw->addItems(channelsList);
m_config->fmsSsPos3Roll->addItems(channelsList);
m_config->fmsSsPos3Pitch->addItems(channelsList);
m_config->fmsSsPos3Yaw->addItems(channelsList);
// And the Armin configurations:
field = obj->getField(QString("Arming"));
m_config->armControl->clear();
m_config->armControl->addItems(field->getOptions());
obj = dynamic_cast<UAVDataObject*>(objManager->getObject(QString("ActuatorSettings")));
fieldList = obj->getFields();
foreach (UAVObjectField* field, fieldList) {
if (field->getUnits().contains("channel")) {
m_config->ch0Output->addItem(field->getName());
m_config->ch1Output->addItem(field->getName());
m_config->ch2Output->addItem(field->getName());
m_config->ch3Output->addItem(field->getName());
m_config->ch4Output->addItem(field->getName());
m_config->ch5Output->addItem(field->getName());
m_config->ch6Output->addItem(field->getName());
m_config->ch7Output->addItem(field->getName());
}
}
// set the RC input tneutral value textees
for (int i = 0; i < 8; i++)
inNeuLabels[i]->setText(QString::number(inSliders[i]->value()));
for (int i = 0; i < 8; i++) {
connect(outMin[i], SIGNAL(editingFinished()), this, SLOT(setChOutRange()));
connect(outMax[i], SIGNAL(editingFinished()), this, SLOT(setChOutRange()));
connect(reversals[i], SIGNAL(toggled(bool)), this, SLOT(reverseChannel(bool)));
// Now connect the channel out sliders to our signal to send updates in test mode
connect(outSliders[i], SIGNAL(valueChanged(int)), this, SLOT(sendChannelTest(int)));
}
connect(m_config->channelOutTest, SIGNAL(toggled(bool)), this, SLOT(runChannelTests(bool)));
requestRCInputUpdate();
requestRCOutputUpdate();
connect(m_config->saveRCInputToSD, SIGNAL(clicked()), this, SLOT(saveRCInputObject()));
connect(m_config->saveRCInputToRAM, SIGNAL(clicked()), this, SLOT(sendRCInputUpdate()));
connect(m_config->getRCInputCurrent, SIGNAL(clicked()), this, SLOT(requestRCInputUpdate()));
// Flightmode panel is connected to the same as rcinput because
// the underlying object is the same!
connect(m_config->saveFmsToSD, SIGNAL(clicked()), this, SLOT(saveRCInputObject()));
connect(m_config->saveFmsToRAM, SIGNAL(clicked()), this, SLOT(sendRCInputUpdate()));
connect(m_config->getFmsCurrent, SIGNAL(clicked()), this, SLOT(requestRCInputUpdate()));
connect(m_config->saveArmToSD, SIGNAL(clicked()), this, SLOT(saveRCInputObject()));
connect(m_config->saveArmToRAM, SIGNAL(clicked()), this, SLOT(sendRCInputUpdate()));
connect(m_config->getArmCurrent, SIGNAL(clicked()), this, SLOT(requestRCInputUpdate()));
connect(m_config->saveRCOutputToSD, SIGNAL(clicked()), this, SLOT(saveRCOutputObject()));
connect(m_config->saveRCOutputToRAM, SIGNAL(clicked()), this, SLOT(sendRCOutputUpdate()));
connect(m_config->getRCOutputCurrent, SIGNAL(clicked()), this, SLOT(requestRCOutputUpdate()));
connect(parent, SIGNAL(autopilotConnected()),this, SLOT(requestRCInputUpdate()));
connect(parent, SIGNAL(autopilotConnected()),this, SLOT(requestRCOutputUpdate()));
connect(m_config->inSlider0, SIGNAL(valueChanged(int)),this, SLOT(onInSliderValueChanged0(int)));
connect(m_config->inSlider1, SIGNAL(valueChanged(int)),this, SLOT(onInSliderValueChanged1(int)));
connect(m_config->inSlider2, SIGNAL(valueChanged(int)),this, SLOT(onInSliderValueChanged2(int)));
connect(m_config->inSlider3, SIGNAL(valueChanged(int)),this, SLOT(onInSliderValueChanged3(int)));
connect(m_config->inSlider4, SIGNAL(valueChanged(int)),this, SLOT(onInSliderValueChanged4(int)));
connect(m_config->inSlider5, SIGNAL(valueChanged(int)),this, SLOT(onInSliderValueChanged5(int)));
connect(m_config->inSlider6, SIGNAL(valueChanged(int)),this, SLOT(onInSliderValueChanged6(int)));
connect(m_config->inSlider7, SIGNAL(valueChanged(int)),this, SLOT(onInSliderValueChanged7(int)));
firstUpdate = true;
enableControls(false);
// Listen to telemetry connection events
if (pm)
{
TelemetryManager *tm = pm->getObject<TelemetryManager>();
if (tm)
{
connect(tm, SIGNAL(myStart()), this, SLOT(onTelemetryStart()));
connect(tm, SIGNAL(myStop()), this, SLOT(onTelemetryStop()));
connect(tm, SIGNAL(connected()), this, SLOT(onTelemetryConnect()));
connect(tm, SIGNAL(disconnected()), this, SLOT(onTelemetryDisconnect()));
}
}
}
ConfigOutputWidget::ConfigOutputWidget(QWidget *parent) : ConfigTaskWidget(parent)
{
m_config = new Ui_OutputWidget();
m_config->setupUi(this);
ExtensionSystem::PluginManager *pm = ExtensionSystem::PluginManager::instance();
UAVObjectManager *objManager = pm->getObject<UAVObjectManager>();
// First of all, put all the channel widgets into lists, so that we can
// manipulate those:
// NOTE: for historical reasons, we have objects below called ch0 to ch7, but the convention for OP is Channel 1 to Channel 8.
outLabels << m_config->ch0OutValue
<< m_config->ch1OutValue
<< m_config->ch2OutValue
<< m_config->ch3OutValue
<< m_config->ch4OutValue
<< m_config->ch5OutValue
<< m_config->ch6OutValue
<< m_config->ch7OutValue;
outSliders << m_config->ch0OutSlider
<< m_config->ch1OutSlider
<< m_config->ch2OutSlider
<< m_config->ch3OutSlider
<< m_config->ch4OutSlider
<< m_config->ch5OutSlider
<< m_config->ch6OutSlider
<< m_config->ch7OutSlider;
outMin << m_config->ch0OutMin
<< m_config->ch1OutMin
<< m_config->ch2OutMin
<< m_config->ch3OutMin
<< m_config->ch4OutMin
<< m_config->ch5OutMin
<< m_config->ch6OutMin
<< m_config->ch7OutMin;
outMax << m_config->ch0OutMax
<< m_config->ch1OutMax
<< m_config->ch2OutMax
<< m_config->ch3OutMax
<< m_config->ch4OutMax
<< m_config->ch5OutMax
<< m_config->ch6OutMax
<< m_config->ch7OutMax;
reversals << m_config->ch0Rev
<< m_config->ch1Rev
<< m_config->ch2Rev
<< m_config->ch3Rev
<< m_config->ch4Rev
<< m_config->ch5Rev
<< m_config->ch6Rev
<< m_config->ch7Rev;
links << m_config->ch0Link
<< m_config->ch1Link
<< m_config->ch2Link
<< m_config->ch3Link
<< m_config->ch4Link
<< m_config->ch5Link
<< m_config->ch6Link
<< m_config->ch7Link;
UAVDataObject * obj = dynamic_cast<UAVDataObject*>(objManager->getObject(QString("ActuatorSettings")));
QList<UAVObjectField*> fieldList = obj->getFields();
foreach (UAVObjectField* field, fieldList) {
if (field->getUnits().contains("channel")) {
m_config->ch0Output->addItem(field->getName());
m_config->ch1Output->addItem(field->getName());
m_config->ch2Output->addItem(field->getName());
m_config->ch3Output->addItem(field->getName());
m_config->ch4Output->addItem(field->getName());
m_config->ch5Output->addItem(field->getName());
m_config->ch6Output->addItem(field->getName());
m_config->ch7Output->addItem(field->getName());
}
}
for (int i = 0; i < 8; i++) {
connect(outMin[i], SIGNAL(editingFinished()), this, SLOT(setChOutRange()));
connect(outMax[i], SIGNAL(editingFinished()), this, SLOT(setChOutRange()));
connect(reversals[i], SIGNAL(toggled(bool)), this, SLOT(reverseChannel(bool)));
// Now connect the channel out sliders to our signal to send updates in test mode
connect(outSliders[i], SIGNAL(valueChanged(int)), this, SLOT(sendChannelTest(int)));
}
connect(m_config->channelOutTest, SIGNAL(toggled(bool)), this, SLOT(runChannelTests(bool)));
for (int i = 0; i < links.count(); i++)
links[i]->setChecked(false);
for (int i = 0; i < links.count(); i++)
connect(links[i], SIGNAL(toggled(bool)), this, SLOT(linkToggled(bool)));
requestRCOutputUpdate();
connect(m_config->saveRCOutputToSD, SIGNAL(clicked()), this, SLOT(saveRCOutputObject()));
connect(m_config->saveRCOutputToRAM, SIGNAL(clicked()), this, SLOT(sendRCOutputUpdate()));
connect(m_config->getRCOutputCurrent, SIGNAL(clicked()), this, SLOT(requestRCOutputUpdate()));
connect(parent, SIGNAL(autopilotConnected()),this, SLOT(requestRCOutputUpdate()));
firstUpdate = true;
enableControls(false);
// Listen to telemetry connection events
if (pm)
{
TelemetryManager *tm = pm->getObject<TelemetryManager>();
if (tm)
{
connect(tm, SIGNAL(myStart()), this, SLOT(onTelemetryStart()));
connect(tm, SIGNAL(myStop()), this, SLOT(onTelemetryStop()));
connect(tm, SIGNAL(connected()), this, SLOT(onTelemetryConnect()));
connect(tm, SIGNAL(disconnected()), this, SLOT(onTelemetryDisconnect()));
}
}
}
