__task void initTask(void){
//sem init
os_sem_init(&semIncMin, 0);
os_sem_init(&semKeyPress, 0);
os_sem_init(&semIncHour, 0);
os_sem_init(&semIncSec, 0);
initTexts();
//mutex init
os_mut_init(&mutTime);
os_mut_init(&mut_msg_ptr);
os_mut_init(&mut_msg_offset);
//task init
os_tsk_create(taskSerial, 0x82);
os_tsk_create(clock_task, 0x90);
os_tsk_create(taskIncHour, 0x7F);
os_tsk_create(taskIncMin, 0x80);
os_tsk_create(taskIncSec, 0x81);
disTaskId = os_tsk_create(updateDisplay, 0x10);
keyTaskId = os_tsk_create(key_task, 0x7E);
joyTaskId = os_tsk_create(joy_task, 0x7D);
//display stuff...
os_evt_set(DIS_EVT_MSG_PTR, disTaskId);
//end
os_tsk_delete_self();
}
Chip_INIT_RESULT ChipE1Port16Logic::ChipInit(void) {
Chip_INIT_RESULT rtn = updataFPGA();
if( rtn == succeed ) {
uint16 value = regAccess->readReg(LED);//temp test
value |= 2;
regAccess->writeReg(LED, value);
os_mut_init(mut_dcn_rcv);
}
else if( rtn == donothing ) {
os_mut_init(mut_dcn_rcv);
}
return rtn;
}
__task void init(void)
{
os_mut_init(&g_mut_uart);
os_mut_init(&procon);
for( task_creator_ctr = 0; task_creator_ctr < P; task_creator_ctr++ )
{
os_tsk_create(producer_task, 0);
}
task_creator_ctr = 0;
for( task_creator_ctr = 0; task_creator_ctr < C; task_creator_ctr++ )
{
os_tsk_create(consumer_task, 0);
}
// os_tsk_create(updater_task, 10);
os_tsk_delete_self();
}
/*----------------------------------------------------------------------------
* Task 7 'init': Initialize
*---------------------------------------------------------------------------*/
__task void init (void) {
os_mut_init(mut_GLCD);
t_phaseA = os_tsk_create (phaseA, 0); /* start task phaseA */
t_phaseB = os_tsk_create (phaseB, 0); /* start task phaseB */
t_phaseC = os_tsk_create (phaseC, 0); /* start task phaseC */
t_phaseD = os_tsk_create (phaseD, 0); /* start task phaseD */
t_clock = os_tsk_create (clock, 0); /* start task clock */
t_lcd = os_tsk_create (lcd, 0); /* start task lcd */
os_evt_set (0x0001, t_phaseA); /* send signal event to task phaseA */
os_tsk_delete_self ();
}
__task void init (void) {
os_mut_init(mut_GLCD);
os_mut_init(mut_Gclock);
GUI_UC_SetEncodeUTF8();
if(HAL_RTCEx_BKUPRead(&RtcHandle, RTC_BKP_DR6) !=1)
{
zhuantskid = os_tsk_create (zhuan1, 0);
maintskid = os_tsk_create (Main_Task, 0);
keytskid = os_tsk_create (phase_KEY, 0);
servertskid = os_tsk_create (Server_Task, 0);
}else
{
Time3Disable();
HAL_GPIO_WritePin(GPIOE,GPIO_PIN_3,GPIO_PIN_SET);
HAL_GPIO_WritePin(GPIOE,GPIO_PIN_2,GPIO_PIN_RESET);
HAL_GPIO_WritePin(GPIOG,GPIO_PIN_3,GPIO_PIN_RESET);
HAL_GPIO_WritePin(GPIOG,GPIO_PIN_2,GPIO_PIN_SET);
}
os_tsk_create (power, 0);
// os_tmr_create(500,2);
os_tsk_delete_self ();
}
/*---------------------------------------------------------------------*/
__task void init(void)
{
//Initialize the memory pool
_init_box(box_mem, sizeof(box_mem), 4);
os_mut_init(&g_mut_uart);
os_mut_wait(g_mut_uart, 0xFFFF);
printf("init: TID = %d\n", os_tsk_self());
os_mut_release(g_mut_uart);
g_tid = os_tsk_create(task1, 1); /* task 1 at priority 1 */
os_mut_wait(g_mut_uart, 0xFFFF);
printf("init: created task1 with TID %d\n", g_tid);
os_mut_release(g_mut_uart);
g_tid = os_tsk_create(task2, 4); /* task 2 at priority 2 */
os_mut_wait(g_mut_uart, 0xFFFF);
printf("init: created task2 with TID %d\n", g_tid);
os_mut_release(g_mut_uart);
g_tid = os_tsk_create(task3, 3); /* task 3 at priority 3 */
os_mut_wait(g_mut_uart, 0xFFFF);
printf("init: created task3 with TID %d\n", g_tid);
os_mut_release(g_mut_uart);
g_tid = os_tsk_create(task4, 4); /* task 4 at priority 4 */
os_mut_wait(g_mut_uart, 0xFFFF);
printf("init: created task4 with TID %d\n", g_tid);
os_mut_release(g_mut_uart);
g_tid = os_tsk_create(task5, 1); /* task 5 at priority 1 */
os_mut_wait(g_mut_uart, 0xFFFF);
printf("init: created task5 with TID %d\n", g_tid);
os_mut_release(g_mut_uart);
os_tsk_delete_self(); /* task MUST delete itself before exiting */
}
int InitMutex(wolfSSL_Mutex* m)
{
os_mut_init (m);
return 0;
}
int InitMutex(CyaSSL_Mutex* m)
{
os_mut_init (m);
return 0;
}
static void sync_init(void)
{
sync_thread = os_tsk_self();
os_mut_init(&sync_mutex);
}
osMutexId_t osMutexNew(const osMutexAttr_t *attr)
{
os_mut_init(onlyMutex);
return (osMutexId_t)onlyMutex;
}
__task void power (void)
{
unsigned int count =0;
unsigned int temp;
static GPIO_InitTypeDef GPIO_InitStruct;
GPIO_PinState bitstatus;
while(1)
{
GPIO_InitStruct.Pin = GPIO_PIN_2;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
bitstatus = HAL_GPIO_ReadPin(GPIOC,GPIO_PIN_2);
if(bitstatus==GPIO_PIN_RESET)
{
os_dly_wait (200);
bitstatus = HAL_GPIO_ReadPin(GPIOC,GPIO_PIN_2);
if(bitstatus==GPIO_PIN_RESET)
{
if(HAL_RTCEx_BKUPRead(&RtcHandle, RTC_BKP_DR6)==0)
{
count =0;
do{
bitstatus = HAL_GPIO_ReadPin(GPIOC,GPIO_PIN_2);
count++;
if(count>5000000)
{
Time3Disable();
GUI_Clear();
HAL_GPIO_WritePin(GPIOE,GPIO_PIN_3,GPIO_PIN_SET);
HAL_GPIO_WritePin(GPIOE,GPIO_PIN_2,GPIO_PIN_RESET);
if(zhuantskid !=NULL) os_tsk_delete(zhuantskid);
if(maintskid !=NULL) os_tsk_delete(maintskid);
if(keytskid !=NULL) os_tsk_delete(keytskid);
if(servertskid !=NULL) os_tsk_delete(servertskid);
if(meuntskid !=NULL) os_tsk_delete(meuntskid);
if(setsystemtimetskid !=NULL) os_tsk_delete(setsystemtimetskid);
if(setledlighttskid !=NULL) os_tsk_delete(setledlighttskid);
if(setledtimetskid !=NULL) os_tsk_delete(setledtimetskid);
if(setsoundtskid !=NULL) os_tsk_delete(setsoundtskid);
if(setworkmodetskid !=NULL) os_tsk_delete(setworkmodetskid);
if(yushentskid !=NULL) os_tsk_delete(yushentskid);
HAL_RTCEx_BKUPWrite(&RtcHandle,RTC_BKP_DR6,1); // 说明是正常关机状态；
HAL_GPIO_WritePin(GPIOG,GPIO_PIN_3,GPIO_PIN_RESET);
HAL_GPIO_WritePin(GPIOG,GPIO_PIN_2,GPIO_PIN_SET);
}
}while(bitstatus==GPIO_PIN_RESET);
}else
{
os_mut_init(mut_GLCD);
os_mut_init(mut_Gclock);
GUI_UC_SetEncodeUTF8();
zhuantskid = os_tsk_create (zhuan1, 0);
maintskid = os_tsk_create (Main_Task, 0);
keytskid = os_tsk_create (phase_KEY, 0);
servertskid = os_tsk_create (Server_Task, 0);
Time3Enable(HAL_RTCEx_BKUPRead(&RtcHandle, RTC_BKP_DR1));
HAL_GPIO_WritePin(GPIOE,GPIO_PIN_3,GPIO_PIN_RESET);
HAL_GPIO_WritePin(GPIOE,GPIO_PIN_2,GPIO_PIN_SET);
HAL_RTCEx_BKUPWrite(&RtcHandle,RTC_BKP_DR6,0); // 清楚掉关机状态
}
}
}
}
}
