/*********************************************************************
Received a Set(InformInfo) MAD
**********************************************************************/
static void
osm_infr_rcv_process_set_method(IN osm_sa_t * sa,
IN osm_madw_t * const p_madw)
{
ib_sa_mad_t *p_sa_mad;
ib_inform_info_t *p_recvd_inform_info;
osm_infr_t inform_info_rec; /* actual inform record to be stored for reports */
osm_infr_t *p_infr;
ib_net32_t qpn;
uint8_t resp_time_val;
ib_api_status_t res;
OSM_LOG_ENTER(sa->p_log);
CL_ASSERT(p_madw);
p_sa_mad = osm_madw_get_sa_mad_ptr(p_madw);
p_recvd_inform_info =
(ib_inform_info_t *) ib_sa_mad_get_payload_ptr(p_sa_mad);
#if 0
if (osm_log_is_active(sa->p_log, OSM_LOG_DEBUG))
osm_dump_inform_info(sa->p_log, p_recvd_inform_info,
OSM_LOG_DEBUG);
#endif
/* Grab the lock */
cl_plock_excl_acquire(sa->p_lock);
/* define the inform record */
inform_info_rec.inform_record.inform_info = *p_recvd_inform_info;
/* following C13-32.1.2 Tbl 120: we only copy the source address vector */
inform_info_rec.report_addr = p_madw->mad_addr;
/* we will need to know the mad srvc to send back through */
inform_info_rec.h_bind = p_madw->h_bind;
inform_info_rec.sa = sa;
/* update the subscriber GID according to mad address */
res = osm_get_gid_by_mad_addr(sa->p_log, sa->p_subn, &p_madw->mad_addr,
&inform_info_rec.inform_record.
subscriber_gid);
if (res != IB_SUCCESS) {
cl_plock_release(sa->p_lock);
OSM_LOG(sa->p_log, OSM_LOG_ERROR, "ERR 4308 "
"Subscribe Request from unknown LID: %u\n",
cl_ntoh16(p_madw->mad_addr.dest_lid));
osm_sa_send_error(sa, p_madw, IB_SA_MAD_STATUS_REQ_INVALID);
goto Exit;
}
/* HACK: enum is always 0 (currently) */
inform_info_rec.inform_record.subscriber_enum = 0;
/* Subscribe values above 1 are undefined */
if (p_recvd_inform_info->subscribe > 1) {
cl_plock_release(sa->p_lock);
OSM_LOG(sa->p_log, OSM_LOG_ERROR, "ERR 4308 "
"Invalid subscribe: %d\n",
p_recvd_inform_info->subscribe);
osm_sa_send_error(sa, p_madw, IB_SA_MAD_STATUS_REQ_INVALID);
goto Exit;
}
/*
* MODIFICATIONS DONE ON INCOMING REQUEST:
*
* QPN:
* Internally we keep the QPN field of the InformInfo updated
* so we can simply compare it in the record - when finding such.
*/
if (p_recvd_inform_info->subscribe) {
ib_inform_info_set_qpn(&inform_info_rec.inform_record.
inform_info,
inform_info_rec.report_addr.addr_type.
gsi.remote_qp);
OSM_LOG(sa->p_log, OSM_LOG_DEBUG,
"Subscribe Request with QPN: 0x%06X\n",
cl_ntoh32(inform_info_rec.report_addr.addr_type.gsi.
remote_qp));
} else {
ib_inform_info_get_qpn_resp_time(p_recvd_inform_info->g_or_v.
generic.qpn_resp_time_val,
&qpn, &resp_time_val);
OSM_LOG(sa->p_log, OSM_LOG_DEBUG,
"UnSubscribe Request with QPN: 0x%06X\n",
cl_ntoh32(qpn));
}
/* If record exists with matching InformInfo */
p_infr =
osm_infr_get_by_rec(sa->p_subn, sa->p_log, &inform_info_rec);
/* check to see if the request was for subscribe */
if (p_recvd_inform_info->subscribe) {
/* validate the request for a new or update InformInfo */
if (__validate_infr(sa, &inform_info_rec) != TRUE) {
cl_plock_release(sa->p_lock);
OSM_LOG(sa->p_log, OSM_LOG_ERROR, "ERR 4305: "
"Failed to validate a new inform object\n");
/* o13-13.1.1: we need to set the subscribe bit to 0 */
p_recvd_inform_info->subscribe = 0;
osm_sa_send_error(sa, p_madw,
IB_SA_MAD_STATUS_REQ_INVALID);
goto Exit;
}
/* ok - we can try and create a new entry */
if (p_infr == NULL) {
/* Create the instance of the osm_infr_t object */
p_infr = osm_infr_new(&inform_info_rec);
if (p_infr == NULL) {
cl_plock_release(sa->p_lock);
OSM_LOG(sa->p_log, OSM_LOG_ERROR, "ERR 4306: "
"Failed to create a new inform object\n");
/* o13-13.1.1: we need to set the subscribe bit to 0 */
p_recvd_inform_info->subscribe = 0;
osm_sa_send_error(sa, p_madw,
IB_SA_MAD_STATUS_NO_RESOURCES);
goto Exit;
}
/* Add this new osm_infr_t object to subnet object */
osm_infr_insert_to_db(sa->p_subn, sa->p_log, p_infr);
} else
/* Update the old instance of the osm_infr_t object */
p_infr->inform_record = inform_info_rec.inform_record;
/* We got an UnSubscribe request */
} else if (p_infr == NULL) {
cl_plock_release(sa->p_lock);
/* No Such Item - So Error */
OSM_LOG(sa->p_log, OSM_LOG_ERROR, "ERR 4307: "
"Failed to UnSubscribe to non existing inform object\n");
/* o13-13.1.1: we need to set the subscribe bit to 0 */
p_recvd_inform_info->subscribe = 0;
osm_sa_send_error(sa, p_madw, IB_SA_MAD_STATUS_REQ_INVALID);
goto Exit;
} else
/* Delete this object from the subnet list of informs */
osm_infr_remove_from_db(sa->p_subn, sa->p_log, p_infr);
cl_plock_release(sa->p_lock);
/* send the success response */
__osm_infr_rcv_respond(sa, p_madw);
Exit:
OSM_LOG_EXIT(sa->p_log);
}
/*
* Register/Unregister to receive the given InformInfo
*
* Uses the qp context to send the inform info mad.
* Wait for GetResp(InformInfoResp)
*
*/
ib_api_status_t
osmt_reg_unreg_inform_info(IN osmtest_t * p_osmt,
IN osmt_qp_ctx_t * p_qp_ctx,
IN ib_inform_info_t * p_inform_info,
IN uint8_t reg_flag)
{
ib_sa_mad_t *p_sa_mad = (ib_sa_mad_t *) (p_qp_ctx->p_send_buf);
ib_inform_info_t *p_ii = ib_sa_mad_get_payload_ptr(p_sa_mad); /* SA Payload */
VAPI_ret_t vapi_ret;
VAPI_wc_desc_t wc_desc;
VAPI_ud_av_hndl_t avh;
static VAPI_wr_id_t wrid = 16198;
osm_log_t *p_log = &p_osmt->log;
ib_api_status_t status = IB_SUCCESS;
OSM_LOG_ENTER(&p_osmt->log);
/* init the MAD */
ib_mad_init_new((ib_mad_t *) p_sa_mad,
IB_MCLASS_SUBN_ADM,
(uint8_t) 2,
IB_MAD_METHOD_SET, cl_hton64(wrid), (ib_net16_t) 0, 0);
wrid++;
p_sa_mad->attr_id = IB_MAD_ATTR_INFORM_INFO;
/* copy the reference inform info */
memcpy(p_ii, p_inform_info, sizeof(ib_inform_info_t));
if (reg_flag) {
OSM_LOG(&p_osmt->log, OSM_LOG_INFO,
"Subscribing InformInfo: Traps from lid:0x%X to 0x%X, trap num :0x%X\n",
p_ii->lid_range_begin, p_ii->lid_range_end,
p_ii->g_or_v.generic.trap_num);
} else {
OSM_LOG(&p_osmt->log, OSM_LOG_INFO,
"UnSubscribing InformInfo: Traps from lid:0x%X to 0x%X\n",
p_ii->lid_range_begin, p_ii->lid_range_end);
}
/* set the subscribe bit */
if (reg_flag) {
p_ii->subscribe = 1;
} else {
p_ii->subscribe = 0;
/*
* we need to set the QPN on the mad if we unsubscribe:
* o13-2.1.1 - QPN Field need to be set when unsubscribing.
*/
ib_inform_info_set_qpn(p_ii,
cl_hton32(p_qp_ctx->qp_bind_hndl.qp_id.
qp_num));
}
osm_dump_inform_info(&p_osmt->log, p_ii, OSM_LOG_DEBUG);
/* --------------------- PREP ------------------------- */
if (osmt_mtl_mad_post_recv_bufs(&p_qp_ctx->qp_bind_hndl, p_qp_ctx->p_recv_buf, 1, /* but we need only one mad at a time */
GRH_LEN + MAD_BLOCK_SIZE, wrid) != 1) {
OSM_LOG(p_log, OSM_LOG_ERROR, "ERR 0120: "
"Error posting recv bufs\n");
status = IB_ERROR;
goto Exit;
}
OSM_LOG(p_log, OSM_LOG_DEBUG, "Posted recv bufs\n");
vapi_ret =
osmt_mtl_create_av(&p_qp_ctx->qp_bind_hndl,
p_osmt->local_port.sm_lid, &avh);
if (vapi_ret != VAPI_OK) {
OSM_LOG(p_log, OSM_LOG_ERROR, "ERR 0121: "
"Error Preparing AVH (%s)\n",
VAPI_strerror_sym(vapi_ret));
status = IB_ERROR;
goto Exit;
}
OSM_LOG(p_log, OSM_LOG_DEBUG, "Prepared AVH\n");
if (osm_log_is_active(p_log, OSM_LOG_DEBUG)) {
osm_dump_sa_mad(p_log, (ib_sa_mad_t *) (p_qp_ctx->p_send_buf),
OSM_LOG_DEBUG);
#if 0
for (i = 56; i < 253; i++) {
if (i % 8 == 0) {
printf("\n %d : ", i);
}
printf("0x%02X ", p_qp_ctx->p_send_buf[i]);
}
#endif
printf("\n");
}
/* --------------------- SEND ------------------------- */
vapi_ret = osmt_mtl_mad_send(&p_qp_ctx->qp_bind_hndl, wrid, p_qp_ctx->p_send_buf, 1, /* SA is QP1 */
0, /* SL is 0 */
OSMT_MTL_REVERSE_QP1_WELL_KNOWN_Q_KEY,
avh);
if (vapi_ret != VAPI_OK) {
OSM_LOG(p_log, OSM_LOG_ERROR, "ERR 0122: "
"Error sending mad (%s)\n",
VAPI_strerror_sym(vapi_ret));
status = IB_ERROR;
goto Exit;
}
vapi_ret = osmt_mtl_mad_poll4cqe(p_qp_ctx->qp_bind_hndl.hca_hndl,
p_qp_ctx->qp_bind_hndl.sq_cq_hndl,
&wc_desc, 20, 10000, NULL);
if (vapi_ret != VAPI_OK) {
OSM_LOG(p_log, OSM_LOG_ERROR, "ERR 0123: "
"Error getting send completion (%s)\n",
VAPI_strerror_sym(vapi_ret));
status = IB_ERROR;
goto Exit;
}
if (wc_desc.status != VAPI_SUCCESS) {
OSM_LOG(p_log, OSM_LOG_ERROR, "ERR 0124: "
"Error on send completion (%s) (%d)\n",
VAPI_strerror_sym(wc_desc.status), wc_desc.status);
status = IB_ERROR;
goto Exit;
}
OSM_LOG(p_log, OSM_LOG_DEBUG, "Sent MAD\n");
/* --------------------- RECV ------------------------- */
vapi_ret = osmt_mtl_mad_poll4cqe(p_qp_ctx->qp_bind_hndl.hca_hndl,
p_qp_ctx->qp_bind_hndl.rq_cq_hndl,
&wc_desc, 20, 10000, &avh);
if (vapi_ret != VAPI_SUCCESS) {
if (vapi_ret == VAPI_CQ_EMPTY) {
status = IB_TIMEOUT;
} else {
OSM_LOG(p_log, OSM_LOG_ERROR, "ERR 0125: "
"Error receiving mad (%s)\n",
VAPI_strerror_sym(vapi_ret));
status = IB_ERROR;
}
goto Exit;
}
/* check to see if successful - by examination of the subscribe bit */
p_sa_mad = (ib_sa_mad_t *) (p_qp_ctx->p_recv_buf + GRH_LEN);
if (p_sa_mad->status != IB_SUCCESS) {
OSM_LOG(&p_osmt->log, OSM_LOG_ERROR, "Remote error = %s\n",
ib_get_mad_status_str((ib_mad_t *) p_sa_mad));
status = IB_REMOTE_ERROR;
goto Exit;
}
if (p_sa_mad->method != IB_MAD_METHOD_GET_RESP) {
OSM_LOG(&p_osmt->log, OSM_LOG_ERROR,
"Expected IB_MAD_METHOD_GET_RESP but got:(%X)\n",
p_sa_mad->method);
status = IB_REMOTE_ERROR;
goto Exit;
}
if (p_sa_mad->attr_id != IB_MAD_ATTR_INFORM_INFO) {
OSM_LOG(&p_osmt->log, OSM_LOG_ERROR,
"Expected IB_MAD_ATTR_INFORM_INFO but got:(%X)\n",
cl_ntoh16(p_sa_mad->attr_id));
status = IB_REMOTE_ERROR;
goto Exit;
}
p_ii = ib_sa_mad_get_payload_ptr(p_sa_mad);
if (!p_ii->subscribe) {
OSM_LOG(p_log, OSM_LOG_ERROR, "ERR 0126: "
"Subscribe/Unsubscribe Failed\n");
status = IB_REMOTE_ERROR;
}
Exit:
OSM_LOG_EXIT(&p_osmt->log);
return status;
}
