Example #1
0
void VisibilityLayout::layout(GraphAttributes &GA, const UpwardPlanRep &UPROrig)
{
	UpwardPlanRep UPR = UPROrig;

	//clear some data
	for(edge e : GA.constGraph().edges) {
		GA.bends(e).clear();
	}

	int minGridDist = 1;
	for(node v : GA.constGraph().nodes) {
		if (minGridDist < max(GA.height(v), GA.width(v)))
			minGridDist = (int) max(GA.height(v), GA.width(v));
	}
	minGridDist = max(minGridDist*2+1, m_grid_dist);

	CombinatorialEmbedding &gamma = UPR.getEmbedding();
	//add edge (s,t)
	adjEntry adjSrc = nullptr;
	for(adjEntry adj : UPR.getSuperSource()->adjEntries) {
		if (gamma.rightFace(adj) == gamma.externalFace())
			adjSrc = adj;
			break;
	}

	OGDF_ASSERT(adjSrc != nullptr);

	edge e_st = UPR.newEdge(adjSrc, UPR.getSuperSink()); // on the right
	gamma.computeFaces();
	gamma.setExternalFace(gamma.rightFace(e_st->adjSource()));

	constructVisibilityRepresentation(UPR);

	// the preliminary postion
	NodeArray<int> xPos(UPR);
	NodeArray<int> yPos(UPR);

	// node Position
	for(node v : UPR.nodes) {
		NodeSegment vVis = nodeToVis[v];
		int x = (int) (vVis.x_l + vVis.x_r)/2 ; // median positioning
		xPos[v] = x;
		yPos[v] = vVis.y;

		if (UPR.original(v) != nullptr) {
			node vOrig = UPR.original(v);
			//final position
			GA.x(vOrig) = x * minGridDist;
			GA.y(vOrig)	= vVis.y * minGridDist;
		}
	}

	//compute bendpoints
	for(edge e : GA.constGraph().edges) {
		const List<edge> &chain = UPR.chain(e);
		for(edge eUPR : chain) {
			EdgeSegment eVis = edgeToVis[eUPR];
			if (chain.size() == 1) {
				if ((yPos[eUPR->target()] - yPos[eUPR->source()]) > 1) {
					DPoint p1(eVis.x*minGridDist, (yPos[eUPR->source()]+1)*minGridDist);
					DPoint p2(eVis.x*minGridDist, (yPos[eUPR->target()]-1)*minGridDist);
					GA.bends(e).pushBack(p1);
					if (yPos[eUPR->source()]+1 != yPos[eUPR->target()]-1)
						GA.bends(e).pushBack(p2);
				}
			}
			else {
				//short edge
				if ((yPos[eUPR->target()] - yPos[eUPR->source()]) == 1) {
					if (UPR.original(eUPR->target()) == nullptr) {
						node tgtUPR = eUPR->target();
						DPoint p(xPos[tgtUPR]*minGridDist, yPos[tgtUPR]*minGridDist);
						GA.bends(e).pushBack(p);
					}
				}
				//long edge
				else {
					DPoint p1(eVis.x*minGridDist, (yPos[eUPR->source()]+1)*minGridDist);
					DPoint p2(eVis.x*minGridDist, (yPos[eUPR->target()]-1)*minGridDist);
					GA.bends(e).pushBack(p1);
					if (yPos[eUPR->source()]+1 != yPos[eUPR->target()]-1)
						GA.bends(e).pushBack(p2);
					if (UPR.original(eUPR->target()) == nullptr) {
						node tgtUPR = eUPR->target();
						DPoint p(xPos[tgtUPR]*minGridDist, yPos[tgtUPR]*minGridDist);
						GA.bends(e).pushBack(p);
					}
				}
			}
		}

		DPolyline &poly = GA.bends(e);
		DPoint pSrc(GA.x(e->source()), GA.y(e->source()));
		DPoint pTgt(GA.x(e->target()), GA.y(e->target()));
		poly.normalize(pSrc, pTgt);
	}
}
Example #2
0
void DominanceLayout::layout(GraphAttributes &GA, const UpwardPlanRep &UPROrig)
{

	UpwardPlanRep UPR = UPROrig;

	//clear some data
	for(edge e : GA.constGraph().edges) {
		GA.bends(e).clear();
	}

	//compute and splite transitiv edges
	List<edge> splitMe;
	findTransitiveEdges(UPR, splitMe);

	for(edge eSplit : splitMe) {
		UPR.getEmbedding().split(eSplit);
	}

	// set up first-/lastout, first-/lastin
	firstout.init(UPR, nullptr);
	lastout.init(UPR, nullptr);
	firstin.init(UPR, nullptr);
	lastin.init(UPR, nullptr);

	node s = UPR.getSuperSource();
	node t = UPR.getSuperSink();

	firstout[t] = lastout[t] = nullptr;
	firstin[s] = lastin[s] = nullptr;
	firstin[t] = lastin[t] =t->firstAdj()->theEdge();
	adjEntry adjRun = s->firstAdj();
	while (UPR.getEmbedding().rightFace(adjRun) != UPR.getEmbedding().externalFace()) {
		adjRun = adjRun->cyclicSucc();
	}
	lastout[s] = adjRun->theEdge();
	firstout[s] = adjRun->cyclicSucc()->theEdge();

	for(node v : UPR.nodes) {
		if (v == t || v == s) continue;

		adjEntry adj = UPR.leftInEdge(v);
		firstin[v] = adj->theEdge();
		firstout[v] = adj->cyclicSucc()->theEdge();

		adjEntry adjRightIn = adj;
		while (adjRightIn->cyclicPred()->theEdge()->source() != v)
			adjRightIn = adjRightIn->cyclicPred();

		lastin[v] = adjRightIn->theEdge();
		lastout[v] = adjRightIn->cyclicPred()->theEdge();
	}


	//compute m_L and m_R for min. area drawing
	m_L = 0;
	m_R = 0;
	for(edge e : UPR.edges) {
		node src = e->source();
		node tgt = e->target();
		if (lastin[tgt] == e && firstout[src] == e)
			m_L++;
		if (firstin[tgt] == e && lastout[src] == e)
			m_R++;
	}

	// compute preleminary coordinate
	xPreCoord.init(UPR);
	yPreCoord.init(UPR);
	int count = 0;
	labelX(UPR, s, count);
	count = 0;
	labelY(UPR, s, count);

	// compaction
	compact(UPR, GA);

	// map coordinate to GA
	for(node v : GA.constGraph().nodes) {
		node vUPR = UPR.copy(v);
		GA.x(v) = xCoord[vUPR];
		GA.y(v) = yCoord[vUPR];
	}
	// add bends to original edges
	for(edge e : GA.constGraph().edges) {
		const List<edge> &chain = UPR.chain(e);
		for(edge eChain : chain) {
			node tgtUPR = eChain->target();
			if (tgtUPR != chain.back()->target()) {
				DPoint p(xCoord[tgtUPR], yCoord[tgtUPR]);
				GA.bends(e).pushBack(p);
			}
		}
	}


	//rotate the drawing
	for(node v : GA.constGraph().nodes) {
		double r = sqrt(GA.x(v)*GA.x(v) + GA.y(v)*GA.y(v));
		if (r == 0)
			continue;
		double alpha = asin(GA.y(v)/r);
		double yNew = sin(alpha + m_angle)*r;
		double xNew = cos(alpha + m_angle)*r;
		GA.x(v) = xNew;
		GA.y(v) = yNew;
	}

	for(edge e : GA.constGraph().edges) {
		DPolyline &poly = GA.bends(e);
		DPoint pSrc(GA.x(e->source()), GA.y(e->source()));
		DPoint pTgt(GA.x(e->target()), GA.y(e->target()));
		poly.normalize(pSrc, pTgt);

		for(DPoint &p : poly) {
			double r = p.distance(DPoint(0,0));

			if (r == 0)
				continue;

			double alpha = asin( p.m_y/r);
			double yNew = sin(alpha + m_angle)*r;
			double xNew = cos(alpha + m_angle)*r;
			p.m_x = xNew;
			p.m_y = yNew;
		}

	}
}