static int __devinit i5100_init_one(struct pci_dev *pdev,
				    const struct pci_device_id *id)
{
	int rc;
	struct mem_ctl_info *mci;
	struct i5100_priv *priv;
	struct pci_dev *ch0mm, *ch1mm;
	int ret = 0;
	u32 dw;
	int ranksperch;

	if (PCI_FUNC(pdev->devfn) != 1)
		return -ENODEV;

	rc = pci_enable_device(pdev);
	if (rc < 0) {
		ret = rc;
		goto bail;
	}

	/* ECC enabled? */
	pci_read_config_dword(pdev, I5100_MC, &dw);
	if (!i5100_mc_errdeten(dw)) {
		printk(KERN_INFO "i5100_edac: ECC not enabled.\n");
		ret = -ENODEV;
		goto bail_pdev;
	}

	/* figure out how many ranks, from strapped state of 48GB_Mode input */
	pci_read_config_dword(pdev, I5100_MS, &dw);
	ranksperch = !!(dw & (1 << 8)) * 2 + 4;

	/* enable error reporting... */
	pci_read_config_dword(pdev, I5100_EMASK_MEM, &dw);
	dw &= ~I5100_FERR_NF_MEM_ANY_MASK;
	pci_write_config_dword(pdev, I5100_EMASK_MEM, dw);

	/* device 21, func 0, Channel 0 Memory Map, Error Flag/Mask, etc... */
	ch0mm = pci_get_device_func(PCI_VENDOR_ID_INTEL,
				    PCI_DEVICE_ID_INTEL_5100_21, 0);
	if (!ch0mm) {
		ret = -ENODEV;
		goto bail_pdev;
	}

	rc = pci_enable_device(ch0mm);
	if (rc < 0) {
		ret = rc;
		goto bail_ch0;
	}

	/* device 22, func 0, Channel 1 Memory Map, Error Flag/Mask, etc... */
	ch1mm = pci_get_device_func(PCI_VENDOR_ID_INTEL,
				    PCI_DEVICE_ID_INTEL_5100_22, 0);
	if (!ch1mm) {
		ret = -ENODEV;
		goto bail_disable_ch0;
	}

	rc = pci_enable_device(ch1mm);
	if (rc < 0) {
		ret = rc;
		goto bail_ch1;
	}

	mci = edac_mc_alloc(sizeof(*priv), ranksperch * 2, 1, 0);
	if (!mci) {
		ret = -ENOMEM;
		goto bail_disable_ch1;
	}

	mci->dev = &pdev->dev;

	priv = mci->pvt_info;
	priv->ranksperchan = ranksperch;
	priv->mc = pdev;
	priv->ch0mm = ch0mm;
	priv->ch1mm = ch1mm;

	INIT_DELAYED_WORK(&(priv->i5100_scrubbing), i5100_refresh_scrubbing);

	/* If scrubbing was already enabled by the bios, start maintaining it */
	pci_read_config_dword(pdev, I5100_MC, &dw);
	if (i5100_mc_scrben(dw)) {
		priv->scrub_enable = 1;
		schedule_delayed_work(&(priv->i5100_scrubbing),
				      I5100_SCRUB_REFRESH_RATE);
	}

	i5100_init_dimm_layout(pdev, mci);
	i5100_init_interleaving(pdev, mci);

	mci->mtype_cap = MEM_FLAG_FB_DDR2;
	mci->edac_ctl_cap = EDAC_FLAG_SECDED;
	mci->edac_cap = EDAC_FLAG_SECDED;
	mci->mod_name = "i5100_edac.c";
	mci->mod_ver = "not versioned";
	mci->ctl_name = "i5100";
	mci->dev_name = pci_name(pdev);
	mci->ctl_page_to_phys = NULL;

	mci->edac_check = i5100_check_error;
	mci->set_sdram_scrub_rate = i5100_set_scrub_rate;
	mci->get_sdram_scrub_rate = i5100_get_scrub_rate;

	i5100_init_csrows(mci);

	/* this strange construction seems to be in every driver, dunno why */
	switch (edac_op_state) {
	case EDAC_OPSTATE_POLL:
	case EDAC_OPSTATE_NMI:
		break;
	default:
		edac_op_state = EDAC_OPSTATE_POLL;
		break;
	}

	if (edac_mc_add_mc(mci)) {
		ret = -ENODEV;
		goto bail_scrub;
	}

	return ret;

bail_scrub:
	priv->scrub_enable = 0;
	cancel_delayed_work_sync(&(priv->i5100_scrubbing));
	edac_mc_free(mci);

bail_disable_ch1:
	pci_disable_device(ch1mm);

bail_ch1:
	pci_dev_put(ch1mm);

bail_disable_ch0:
	pci_disable_device(ch0mm);

bail_ch0:
	pci_dev_put(ch0mm);

bail_pdev:
	pci_disable_device(pdev);

bail:
	return ret;
}
Example #2
0
static int __devinit i5100_init_one(struct pci_dev *pdev,
				    const struct pci_device_id *id)
{
	int rc;
	struct mem_ctl_info *mci;
	struct i5100_priv *priv;
	struct pci_dev *ch0mm, *ch1mm;
	int ret = 0;
	u32 dw;
	int ranksperch;

	if (PCI_FUNC(pdev->devfn) != 1)
		return -ENODEV;

	rc = pci_enable_device(pdev);
	if (rc < 0) {
		ret = rc;
		goto bail;
	}

	/* ECC enabled? */
	pci_read_config_dword(pdev, I5100_MC, &dw);
	if (!i5100_mc_errdeten(dw)) {
		printk(KERN_INFO "i5100_edac: ECC not enabled.\n");
		ret = -ENODEV;
		goto bail_pdev;
	}

	/* figure out how many ranks, from strapped state of 48GB_Mode input */
	pci_read_config_dword(pdev, I5100_MS, &dw);
	ranksperch = !!(dw & (1 << 8)) * 2 + 4;

	if (ranksperch != 4) {
		/* FIXME: get 6 ranks / controller to work - need hw... */
		printk(KERN_INFO "i5100_edac: unsupported configuration.\n");
		ret = -ENODEV;
		goto bail_pdev;
	}

	/* enable error reporting... */
	pci_read_config_dword(pdev, I5100_EMASK_MEM, &dw);
	dw &= ~I5100_FERR_NF_MEM_ANY_MASK;
	pci_write_config_dword(pdev, I5100_EMASK_MEM, dw);

	/* device 21, func 0, Channel 0 Memory Map, Error Flag/Mask, etc... */
	ch0mm = pci_get_device_func(PCI_VENDOR_ID_INTEL,
				    PCI_DEVICE_ID_INTEL_5100_21, 0);
	if (!ch0mm) {
		ret = -ENODEV;
		goto bail_pdev;
	}

	rc = pci_enable_device(ch0mm);
	if (rc < 0) {
		ret = rc;
		goto bail_ch0;
	}

	/* device 22, func 0, Channel 1 Memory Map, Error Flag/Mask, etc... */
	ch1mm = pci_get_device_func(PCI_VENDOR_ID_INTEL,
				    PCI_DEVICE_ID_INTEL_5100_22, 0);
	if (!ch1mm) {
		ret = -ENODEV;
		goto bail_disable_ch0;
	}

	rc = pci_enable_device(ch1mm);
	if (rc < 0) {
		ret = rc;
		goto bail_ch1;
	}

	mci = edac_mc_alloc(sizeof(*priv), ranksperch * 2, 1, 0);
	if (!mci) {
		ret = -ENOMEM;
		goto bail_disable_ch1;
	}

	mci->dev = &pdev->dev;

	priv = mci->pvt_info;
	priv->ranksperctlr = ranksperch;
	priv->mc = pdev;
	priv->ch0mm = ch0mm;
	priv->ch1mm = ch1mm;

	i5100_init_dimm_layout(pdev, mci);
	i5100_init_interleaving(pdev, mci);

	mci->mtype_cap = MEM_FLAG_FB_DDR2;
	mci->edac_ctl_cap = EDAC_FLAG_SECDED;
	mci->edac_cap = EDAC_FLAG_SECDED;
	mci->mod_name = "i5100_edac.c";
	mci->mod_ver = "not versioned";
	mci->ctl_name = "i5100";
	mci->dev_name = pci_name(pdev);
	mci->ctl_page_to_phys = NULL;

	mci->edac_check = i5100_check_error;

	i5100_init_csrows(mci);

	/* this strange construction seems to be in every driver, dunno why */
	switch (edac_op_state) {
	case EDAC_OPSTATE_POLL:
	case EDAC_OPSTATE_NMI:
		break;
	default:
		edac_op_state = EDAC_OPSTATE_POLL;
		break;
	}

	if (edac_mc_add_mc(mci)) {
		ret = -ENODEV;
		goto bail_mc;
	}

	return ret;

bail_mc:
	edac_mc_free(mci);

bail_disable_ch1:
	pci_disable_device(ch1mm);

bail_ch1:
	pci_dev_put(ch1mm);

bail_disable_ch0:
	pci_disable_device(ch0mm);

bail_ch0:
	pci_dev_put(ch0mm);

bail_pdev:
	pci_disable_device(pdev);

bail:
	return ret;
}