void
pcic_isapnp_attach(struct device *parent, struct device *self,
void *aux)
{
struct pcic_softc *sc = device_private(self);
struct pcic_isa_softc *isc = device_private(self);
struct isapnp_attach_args *ipa = aux;
isa_chipset_tag_t ic = ipa->ipa_ic;
bus_space_tag_t iot = ipa->ipa_iot;
bus_space_tag_t memt = ipa->ipa_memt;
bus_space_handle_t ioh;
bus_space_handle_t memh;
bus_addr_t maddr;
int msize;
int tmp1;
printf("\n");
if (isapnp_config(iot, memt, ipa)) {
aprint_error_dev(&sc->dev, "error in region allocation\n");
return;
}
printf("%s: %s %s", device_xname(&sc->dev), ipa->ipa_devident,
ipa->ipa_devclass);
/* sanity check that we get at least one hunk of IO space.. */
if (ipa->ipa_nio < 1) {
aprint_error_dev(&sc->dev, "failed to get one chunk of i/o space\n");
return;
}
/* Find i/o space. */
ioh = ipa->ipa_io[0].h;
/* sanity check to make sure we have a real PCIC there.. */
bus_space_write_1(iot, ioh, PCIC_REG_INDEX, C0SA + PCIC_IDENT);
tmp1 = bus_space_read_1(iot, ioh, PCIC_REG_DATA);
printf("(ident 0x%x", tmp1);
if (pcic_ident_ok(tmp1)) {
printf(" OK)");
} else {
printf(" Not OK)\n");
return;
}
msize = 0x4000;
if (isa_mem_alloc (memt, msize, msize, 0, 0,
&maddr, &memh)) {
printf(": can't alloc mem space\n");
return;
}
printf(": using iomem 0x%lx iosiz 0x%x", maddr, msize);
sc->membase = maddr;
sc->subregionmask = (1 << (msize / PCIC_MEM_PAGESIZE)) - 1;
isc->sc_ic = ic;
sc->pct = (pcmcia_chipset_tag_t) & pcic_isa_functions;
sc->iot = iot;
sc->ioh = ioh;
sc->memt = memt;
sc->memh = memh;
/*
* allocate an irq. it will be used by both controllers. I could
* use two different interrupts, but interrupts are relatively
* scarce, shareable, and for PCIC controllers, very infrequent.
*/
if (ipa->ipa_nirq > 0)
sc->irq = ipa->ipa_irq[0].num;
else
sc->irq = -1;
printf("\n");
pcic_attach(sc);
pcic_isa_bus_width_probe(sc, iot, ioh, ipa->ipa_io[0].base,
ipa->ipa_io[0].length);
pcic_attach_sockets(sc);
config_interrupts(self, pcic_isa_config_interrupts);
}
void
pcic_pci_attach(device_t parent, device_t self, void *aux)
{
struct pcic_pci_softc *psc = device_private(self);
struct pcic_softc *sc = &psc->sc_pcic;
struct pci_attach_args *pa = aux;
pci_chipset_tag_t pc = pa->pa_pc;
bus_space_tag_t memt = pa->pa_memt;
bus_space_handle_t memh;
const char *model;
sc->dev = self;
aprint_naive(": PCMCIA controller\n");
if (pci_mapreg_map(pa, PCI_CBIO, PCI_MAPREG_TYPE_IO, 0,
&sc->iot, &sc->ioh, NULL, NULL)) {
aprint_error(": can't map i/o space\n");
return;
}
/*
* XXX need some memory for mapping pcmcia cards into. Ideally, this
* would be completely dynamic. Practically this doesn't work,
* because the extent mapper doesn't know about all the devices all
* the time. With ISA we could finesse the issue by specifying the
* memory region in the config line. We can't do that here, so we
* cheat for now. Jason Thorpe, you are my Savior, come up with a fix
* :-)
*/
/* Map mem space. */
if (bus_space_map(memt, 0xd0000, 0x4000, 0, &memh))
panic("pcic_pci_attach: can't map mem space");
sc->membase = 0xd0000;
sc->subregionmask = (1 << (0x4000 / PCIC_MEM_PAGESIZE)) - 1;
/* same deal for io allocation */
sc->iobase = 0x400;
sc->iosize = 0xbff;
/* end XXX */
sc->pct = &pcic_pci_functions;
sc->memt = memt;
sc->memh = memh;
switch (PCI_PRODUCT(pa->pa_id)) {
case PCI_PRODUCT_CIRRUS_CL_PD6729:
model = "Cirrus Logic PD6729 PCMCIA controller";
break;
default:
model = "Model unknown";
break;
}
aprint_normal(": %s\n", model);
/* Enable the card. */
pci_conf_write(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG,
pci_conf_read(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG) |
PCI_COMMAND_MASTER_ENABLE);
pcic_attach(sc);
/*
* Check to see if we're using PCI or ISA interrupts. I don't
* know of any i386 systems that use the 6729 in PCI interrupt
* mode, but maybe when the PCMCIA code runs on other platforms
* we'll need to fix this.
*/
pcic_write(&sc->handle[0], PCIC_CIRRUS_EXTENDED_INDEX,
PCIC_CIRRUS_EXT_CONTROL_1);
if ((pcic_read(&sc->handle[0], PCIC_CIRRUS_EXTENDED_DATA) &
PCIC_CIRRUS_EXT_CONTROL_1_PCI_INTR_MASK)) {
aprint_error_dev(self, "PCI interrupts not supported\n");
return;
}
psc->intr_est = pcic_pci_machdep_intr_est(pc);
sc->irq = -1;
#if 0
/* Map and establish the interrupt. */
sc->ih = pcic_pci_machdep_pcic_intr_establish(sc, pcic_intr);
if (sc->ih == NULL) {
aprint_error_dev(self, "couldn't map interrupt\n");
return;
}
#endif
/*
* Defer configuration of children until ISA has had its chance
* to use up whatever IO space and IRQs it wants. XXX This will
* only work if ISA is attached to a pcib, AND the PCI probe finds
* and defers the ISA attachment before this one.
*/
config_defer(self, pcic_pci_callback);
config_interrupts(self, pcic_isa_config_interrupts);
}
