/*******************************************************************************
* RockChip handler called when a power domain has just been powered on after
* being turned off earlier. The target_state encodes the low power state that
* each level has woken up from.
******************************************************************************/
void rockchip_pwr_domain_on_finish(const psci_power_state_t *target_state)
{
uint32_t lvl;
plat_local_state_t lvl_state;
int ret;
assert(RK_CORE_PWR_STATE(target_state) == PLAT_MAX_OFF_STATE);
for (lvl = MPIDR_AFFLVL1; lvl <= PLAT_MAX_PWR_LVL; lvl++) {
lvl_state = target_state->pwr_domain_state[lvl];
ret = rockchip_soc_hlvl_pwr_dm_on_finish(lvl, lvl_state);
if (ret == PSCI_E_NOT_SUPPORTED)
break;
}
rockchip_soc_cores_pwr_dm_on_finish();
/* Perform the common cluster specific operations */
if (RK_CLUSTER_PWR_STATE(target_state) == PLAT_MAX_OFF_STATE) {
/* Enable coherency if this cluster was off */
plat_cci_enable();
}
/* Enable the gic cpu interface */
plat_rockchip_gic_pcpu_init();
/* Program the gic per-cpu distributor or re-distributor interface */
plat_rockchip_gic_cpuif_enable();
}
/*******************************************************************************
* Perform the very early platform specific architectural setup here. At the
* moment this is only intializes the mmu in a quick and dirty way.
* Init MTK propiartary log buffer control field.
******************************************************************************/
void bl31_plat_arch_setup(void)
{
/* Enable non-secure access to CCI-400 registers */
mmio_write_32(CCI400_BASE + CCI_SEC_ACCESS_OFFSET, 0x1);
plat_cci_init();
plat_cci_enable();
if (gteearg.atf_log_buf_size != 0) {
INFO("mmap atf buffer : 0x%x, 0x%x\n\r",
gteearg.atf_log_buf_start,
gteearg.atf_log_buf_size);
mmap_add_region(
gteearg.atf_log_buf_start &
~(PAGE_SIZE_2MB_MASK),
gteearg.atf_log_buf_start &
~(PAGE_SIZE_2MB_MASK),
PAGE_SIZE_2MB,
MT_DEVICE | MT_RW | MT_NS);
INFO("mmap atf buffer (force 2MB aligned):0x%x, 0x%x\n",
(gteearg.atf_log_buf_start & ~(PAGE_SIZE_2MB_MASK)),
PAGE_SIZE_2MB);
}
/*
* add TZRAM_BASE to memory map
* then set RO and COHERENT to different attribute
*/
plat_configure_mmu_el3(
(TZRAM_BASE & ~(PAGE_SIZE_MASK)),
(TZRAM_SIZE & ~(PAGE_SIZE_MASK)),
(BL31_RO_BASE & ~(PAGE_SIZE_MASK)),
BL31_RO_LIMIT,
BL31_COHERENT_RAM_BASE,
BL31_COHERENT_RAM_LIMIT);
/* Initialize for ATF log buffer */
if (gteearg.atf_log_buf_size != 0) {
gteearg.atf_aee_debug_buf_size = ATF_AEE_BUFFER_SIZE;
gteearg.atf_aee_debug_buf_start =
gteearg.atf_log_buf_start +
gteearg.atf_log_buf_size - ATF_AEE_BUFFER_SIZE;
INFO("ATF log service is registered (0x%x, aee:0x%x)\n",
gteearg.atf_log_buf_start,
gteearg.atf_aee_debug_buf_start);
} else{
gteearg.atf_aee_debug_buf_size = 0;
gteearg.atf_aee_debug_buf_start = 0;
}
/* Platform code before bl31_main */
/* compatible to the earlier chipset */
/* Show to ATF log buffer & UART */
INFO("BL3-1: %s\n", version_string);
INFO("BL3-1: %s\n", build_message);
}
/*******************************************************************************
* Perform the very early platform specific architectural setup here. At the
* moment this is only intializes the mmu in a quick and dirty way.
******************************************************************************/
void bl31_plat_arch_setup(void)
{
plat_cci_init();
plat_cci_enable();
plat_configure_mmu_el3(BL31_RO_BASE,
(BL31_COHERENT_RAM_LIMIT - BL31_RO_BASE),
BL31_RO_BASE,
BL31_RO_LIMIT,
BL31_COHERENT_RAM_BASE,
BL31_COHERENT_RAM_LIMIT);
}
/*******************************************************************************
* Perform the very early platform specific architectural setup here. At the
* moment this is only intializes the mmu in a quick and dirty way.
******************************************************************************/
void bl31_plat_arch_setup(void)
{
plat_cci_init();
plat_cci_enable();
plat_configure_mmu_el3(BL_CODE_BASE,
BL_COHERENT_RAM_END - BL_CODE_BASE,
BL_CODE_BASE,
BL_CODE_END,
BL_COHERENT_RAM_BASE,
BL_COHERENT_RAM_END);
}
/*******************************************************************************
* RockChip handler called when a power domain has just been powered on after
* having been suspended earlier. The target_state encodes the low power state
* that each level has woken up from.
* TODO: At the moment we reuse the on finisher and reinitialize the secure
* context. Need to implement a separate suspend finisher.
******************************************************************************/
void rockchip_pwr_domain_suspend_finish(const psci_power_state_t *target_state)
{
uint32_t lvl;
plat_local_state_t lvl_state;
/* Nothing to be done on waking up from retention from CPU level */
if (RK_CORE_PWR_STATE(target_state) != PLAT_MAX_OFF_STATE)
return;
/* Perform system domain restore if woken up from system suspend */
if (!rockchip_ops)
goto comm_finish;
if (RK_SYSTEM_PWR_STATE(target_state) == PLAT_MAX_OFF_STATE) {
if (rockchip_ops->sys_pwr_dm_resume)
rockchip_ops->sys_pwr_dm_resume();
goto comm_finish;
}
if (rockchip_ops->hlvl_pwr_dm_resume) {
for (lvl = MPIDR_AFFLVL1; lvl <= PLAT_MAX_PWR_LVL; lvl++) {
lvl_state = target_state->pwr_domain_state[lvl];
rockchip_ops->hlvl_pwr_dm_resume(lvl, lvl_state);
}
}
if (rockchip_ops->cores_pwr_dm_resume)
rockchip_ops->cores_pwr_dm_resume();
/*
* Program the gic per-cpu distributor or re-distributor interface.
* For sys power domain operation, resuming of the gic needs to operate
* in rockchip_ops->sys_pwr_dm_resume, according to the sys power mode
* implements.
*/
plat_rockchip_gic_cpuif_enable();
comm_finish:
/* Perform the common cluster specific operations */
if (RK_CLUSTER_PWR_STATE(target_state) == PLAT_MAX_OFF_STATE) {
/* Enable coherency if this cluster was off */
plat_cci_enable();
}
}
/*******************************************************************************
* FVP handler called when an affinity instance has just been powered on after
* being turned off earlier. The level and mpidr determine the affinity
* instance. The 'state' arg. allows the platform to decide whether the cluster
* was turned off prior to wakeup and do what's necessary to setup it up
* correctly.
******************************************************************************/
int plat_affinst_on_finish(unsigned long mpidr,
unsigned int afflvl,
unsigned int state)
{
int rc = PSCI_E_SUCCESS;
unsigned ectlr;
/* Determine if any platform actions need to be executed. */
if (plat_do_plat_actions(afflvl, state) == -EAGAIN)
return PSCI_E_SUCCESS;
/* Perform the common cluster specific operations */
if (afflvl >= MPIDR_AFFLVL1) {
/*
* This CPU might have woken up whilst the cluster was
* attempting to power down. In this case the FVP power
* controller will have a pending cluster power off request
* which needs to be cleared by writing to the PPONR register.
* This prevents the power controller from interpreting a
* subsequent entry of this cpu into a simple wfi as a power
* down request.
*/
// plat_pwrc_write_pponr(mpidr);
enable_scu(mpidr);
/* Enable coherency if this cluster was off */
plat_cci_enable();
}
/*
* Ignore the state passed for a cpu. It could only have
* been off if we are here.
*/
workaround_836870(mpidr);
/*
* Turn on intra-cluster coherency if the MTK_platform flavour supports
* it.
*/
ectlr = read_cpuectlr();
ectlr |= CPUECTLR_SMP_BIT;
write_cpuectlr(ectlr);
/*
* Clear PWKUPR.WEN bit to ensure interrupts do not interfere
* with a cpu power down unless the bit is set again
*/
// plat_pwrc_clr_wen(mpidr);
/* Zero the jump address in the mailbox for this cpu */
plat_program_mailbox(read_mpidr_el1(), 0);
/* Enable the gic cpu interface */
// arm_gic_cpuif_setup();
gic_cpuif_setup(get_plat_config()->gicc_base);
gic_pcpu_distif_setup(get_plat_config()->gicd_base);
/* TODO: This setup is needed only after a cold boot */
// arm_gic_pcpu_distif_setup();
enable_ns_access_to_cpuectlr();
return rc;
}
