/**
* \brief Enable USB clock.
*
* \note The SAM3S UDP hardware interprets div as div+1. For readability the hardware div+1
* is hidden in this implementation. Use div as div effective value.
*
* \param pll_id Source of the USB clock.
* \param div Actual clock divisor. Must be superior to 0.
*/
void sysclk_enable_usb(void)
{
Assert(CONFIG_USBCLK_DIV > 0);
#ifdef CONFIG_PLL0_SOURCE
if (CONFIG_USBCLK_SOURCE == USBCLK_SRC_PLL0) {
struct pll_config pllcfg;
pll_enable_source(CONFIG_PLL0_SOURCE);
pll_config_defaults(&pllcfg, 0);
pll_enable(&pllcfg, 0);
pll_wait_for_lock(0);
pmc_switch_udpck_to_pllack(CONFIG_USBCLK_DIV - 1);
pmc_enable_udpck();
return;
}
#endif
#ifdef CONFIG_PLL1_SOURCE
if (CONFIG_USBCLK_SOURCE == USBCLK_SRC_PLL1) {
struct pll_config pllcfg;
pll_enable_source(CONFIG_PLL1_SOURCE);
pll_config_defaults(&pllcfg, 1);
pll_enable(&pllcfg, 1);
pll_wait_for_lock(1);
pmc_switch_udpck_to_pllbck(CONFIG_USBCLK_DIV - 1);
pmc_enable_udpck();
return;
}
#endif
}
/**
* \brief Enable USB clock.
*
* \note The SAM3S UDP hardware interprets div as div+1. For readability the hardware div+1
* is hidden in this implementation. Use div as div effective value.
*
* \param pll_id Source of the USB clock.
* \param div Actual clock diviser. Must be superior to 0.
*/
void sysclk_enable_usb(void)
{
Assert(CONFIG_USBCLK_DIV > 0);
switch (CONFIG_USBCLK_SOURCE) {
#ifdef CONFIG_PLL0_SOURCE
case USBCLK_SRC_PLL0: {
struct pll_config pllcfg;
pll_enable_source(CONFIG_PLL0_SOURCE);
pll_config_defaults(&pllcfg, 0);
pll_enable(&pllcfg, 0);
pll_wait_for_lock(0);
pmc_switch_udpck_to_pllack(CONFIG_USBCLK_DIV - 1);
pmc_enable_udpck();
break;
}
#endif
#ifdef CONFIG_PLL1_SOURCE
case USBCLK_SRC_PLL1: {
struct pll_config pllcfg;
pll_enable_source(CONFIG_PLL1_SOURCE);
pll_config_defaults(&pllcfg, 1);
pll_enable(&pllcfg, 1);
pll_wait_for_lock(1);
pmc_switch_udpck_to_pllbck(CONFIG_USBCLK_DIV - 1);
pmc_enable_udpck();
break;
}
#endif
}
}
/**
* \brief Configure clock for coprocessor.
*/
static void sysclk_configure_cpclk(void)
{
#if ((CONFIG_CPCLK_PRES < CPCLK_PRES_MIN) || (CONFIG_CPCLK_PRES > CPCLK_PRES_MAX))
#error Invalid CONFIG_CPCLK_PRES setting.
#endif
/* Assert coprocessor reset and reset its peripheral */
RSTC->RSTC_CPMR = RSTC_CPMR_CPKEY(0x5Au);
#ifdef CONFIG_PLL0_SOURCE
if ((CONFIG_CPCLK_SOURCE == CPCLK_SRC_PLLACK) &&
(pll_is_locked(0) == 0)) {
struct pll_config pllcfg;
pll_enable_source(CONFIG_PLL0_SOURCE);
pll_config_defaults(&pllcfg, 0);
pll_enable(&pllcfg, 0);
pll_wait_for_lock(0);
}
#endif
#ifdef CONFIG_PLL1_SOURCE
if ((CONFIG_CPCLK_SOURCE == CPCLK_SRC_PLLBCK) &&
(pll_is_locked(1) == 0)) {
struct pll_config pllcfg;
pll_enable_source(CONFIG_PLL1_SOURCE);
pll_config_defaults(&pllcfg, 1);
pll_enable(&pllcfg, 1);
pll_wait_for_lock(1);
}
#endif
uint32_t read_reg;
/* Enables Coprocessor Bus Master Clock */
PMC->PMC_SCER = PMC_SCER_CPBMCK | PMC_SCER_CPKEY_PASSWD;
/* Enables the Coprocessor Clocks */
PMC->PMC_SCER = PMC_SCER_CPCK | PMC_SCER_CPKEY_PASSWD;
/* Set coprocessor clock prescaler and source */
read_reg = REG_PMC_MCKR;
read_reg &= ~PMC_MCKR_CPPRES_Msk;
read_reg |= PMC_MCKR_CPPRES(CONFIG_CPCLK_PRES - 1);
REG_PMC_MCKR = read_reg;
/* Choose coprocessor main clock source */
read_reg = REG_PMC_MCKR;
read_reg &= ~PMC_MCKR_CPCSS_Msk;
read_reg |= (CONFIG_CPCLK_SOURCE << PMC_MCKR_CPCSS_Pos);
REG_PMC_MCKR = read_reg;
/* Release coprocessor peripheral reset */
RSTC->RSTC_CPMR |= (RSTC_CPMR_CPKEY(0x5Au) | RSTC_CPMR_CPEREN);
/* Enable Core 1 SRAM1 and SRAM2 memories */
pmc_enable_periph_clk(42); /* ID_SRAM1_2 */
}
static void sysclk_init_pll(void)
{
struct pll_config pllcfg;
switch (CONFIG_PLL0_SOURCE) {
case PLL_SRC_RC2MHZ:
break;
case PLL_SRC_RC32MHZ:
osc_enable(OSC_ID_RC32MHZ);
osc_wait_ready(OSC_ID_RC32MHZ);
break;
case PLL_SRC_XOSC:
osc_enable(OSC_ID_XOSC);
osc_wait_ready(OSC_ID_XOSC);
break;
default:
//unhandled_case(CONFIG_PLL0_SOURCE);
break;
}
pll_config_defaults(&pllcfg, 0);
pll_enable(&pllcfg, 0);
pll_wait_for_lock(0);
}
/**
* \brief Enable USB clock.
*
* \note The SAM3U UDP hardware interprets div as div+1. For readability the
* hardware div+1 is hidden in this implementation. Use div as div
* effective value.
*
* \param pll_id Source of the USB clock.
* \param div Actual clock divisor. Must be superior to 0.
*/
void sysclk_enable_usb(void)
{
struct pll_config pllcfg;
pll_enable_source(CONFIG_PLL1_SOURCE);
pll_config_defaults(&pllcfg, 1);
pll_enable(&pllcfg, 1);
pll_wait_for_lock(1);
}
void sysclk_init(void)
{
struct pll_config pllcfg;
/* Set a flash wait state depending on the new cpu frequency */
system_init_flash(sysclk_get_cpu_hz());
/* Config system clock setting */
if (CONFIG_SYSCLK_SOURCE == SYSCLK_SRC_SLCK_RC) {
osc_enable(OSC_SLCK_32K_RC);
osc_wait_ready(OSC_SLCK_32K_RC);
pmc_switch_mck_to_sclk(CONFIG_SYSCLK_PRES);
}
else if (CONFIG_SYSCLK_SOURCE == SYSCLK_SRC_SLCK_XTAL) {
osc_enable(OSC_SLCK_32K_XTAL);
osc_wait_ready(OSC_SLCK_32K_XTAL);
pmc_switch_mck_to_sclk(CONFIG_SYSCLK_PRES);
}
else if (CONFIG_SYSCLK_SOURCE == SYSCLK_SRC_SLCK_BYPASS) {
osc_enable(OSC_SLCK_32K_BYPASS);
osc_wait_ready(OSC_SLCK_32K_BYPASS);
pmc_switch_mck_to_sclk(CONFIG_SYSCLK_PRES);
}
else if (CONFIG_SYSCLK_SOURCE == SYSCLK_SRC_MAINCK_4M_RC) {
/* Already running from SYSCLK_SRC_MAINCK_4M_RC */
}
else if (CONFIG_SYSCLK_SOURCE == SYSCLK_SRC_MAINCK_8M_RC) {
osc_enable(OSC_MAINCK_8M_RC);
osc_wait_ready(OSC_MAINCK_8M_RC);
pmc_switch_mck_to_mainck(CONFIG_SYSCLK_PRES);
}
else if (CONFIG_SYSCLK_SOURCE == SYSCLK_SRC_MAINCK_12M_RC) {
osc_enable(OSC_MAINCK_12M_RC);
osc_wait_ready(OSC_MAINCK_12M_RC);
pmc_switch_mck_to_mainck(CONFIG_SYSCLK_PRES);
}
else if (CONFIG_SYSCLK_SOURCE == SYSCLK_SRC_MAINCK_XTAL) {
osc_enable(OSC_MAINCK_XTAL);
osc_wait_ready(OSC_MAINCK_XTAL);
pmc_switch_mck_to_mainck(CONFIG_SYSCLK_PRES);
}
else if (CONFIG_SYSCLK_SOURCE == SYSCLK_SRC_MAINCK_BYPASS) {
osc_enable(OSC_MAINCK_BYPASS);
osc_wait_ready(OSC_MAINCK_BYPASS);
pmc_switch_mck_to_mainck(CONFIG_SYSCLK_PRES);
}
#ifdef CONFIG_PLL0_SOURCE
else if (CONFIG_SYSCLK_SOURCE == SYSCLK_SRC_PLLACK) {
pll_enable_source(CONFIG_PLL0_SOURCE);
// Source is mainck, select source for mainck
if (CONFIG_PLL0_SOURCE == PLL_SRC_MAINCK_4M_RC ||
CONFIG_PLL0_SOURCE == PLL_SRC_MAINCK_8M_RC ||
CONFIG_PLL0_SOURCE == PLL_SRC_MAINCK_12M_RC) {
pmc_mainck_osc_select(0);
while(!pmc_osc_is_ready_mainck());
# ifndef CONFIG_PLL1_SOURCE
pmc_osc_disable_main_xtal();
# endif
} else if (CONFIG_PLL0_SOURCE == PLL_SRC_MAINCK_XTAL ||
CONFIG_PLL0_SOURCE == PLL_SRC_MAINCK_BYPASS) {
pmc_mainck_osc_select(CKGR_MOR_MOSCSEL);
while(!pmc_osc_is_ready_mainck());
}
pll_config_defaults(&pllcfg, 0);
pll_enable(&pllcfg, 0);
pll_wait_for_lock(0);
pmc_switch_mck_to_pllack(CONFIG_SYSCLK_PRES);
}
#endif
else if (CONFIG_SYSCLK_SOURCE == SYSCLK_SRC_UPLLCK) {
pll_enable_source(CONFIG_PLL1_SOURCE);
pll_config_defaults(&pllcfg, 1);
pll_enable(&pllcfg, 1);
pll_wait_for_lock(1);
pmc_switch_mck_to_upllck(CONFIG_SYSCLK_PRES);
}
/* Update the SystemFrequency variable */
SystemCoreClockUpdate();
#if (defined CONFIG_SYSCLK_DEFAULT_RETURNS_SLOW_OSC)
/* Signal that the internal frequencies are setup */
sysclk_initialized = 1;
#endif
}
void sysclk_init(void)
{
/* Set flash wait state to max in case the below clock switching. */
system_init_flash(CHIP_FREQ_CPU_MAX);
/* Config system clock setting */
if (CONFIG_SYSCLK_SOURCE == SYSCLK_SRC_SLCK_RC) {
osc_enable(OSC_SLCK_32K_RC);
osc_wait_ready(OSC_SLCK_32K_RC);
pmc_switch_mck_to_sclk(CONFIG_SYSCLK_PRES);
}
else if (CONFIG_SYSCLK_SOURCE == SYSCLK_SRC_SLCK_XTAL) {
osc_enable(OSC_SLCK_32K_XTAL);
osc_wait_ready(OSC_SLCK_32K_XTAL);
pmc_switch_mck_to_sclk(CONFIG_SYSCLK_PRES);
}
else if (CONFIG_SYSCLK_SOURCE == SYSCLK_SRC_SLCK_BYPASS) {
osc_enable(OSC_SLCK_32K_BYPASS);
osc_wait_ready(OSC_SLCK_32K_BYPASS);
pmc_switch_mck_to_sclk(CONFIG_SYSCLK_PRES);
}
else if (CONFIG_SYSCLK_SOURCE == SYSCLK_SRC_MAINCK_4M_RC) {
/* Already running from SYSCLK_SRC_MAINCK_4M_RC */
}
else if (CONFIG_SYSCLK_SOURCE == SYSCLK_SRC_MAINCK_8M_RC) {
osc_enable(OSC_MAINCK_8M_RC);
osc_wait_ready(OSC_MAINCK_8M_RC);
pmc_switch_mck_to_mainck(CONFIG_SYSCLK_PRES);
}
else if (CONFIG_SYSCLK_SOURCE == SYSCLK_SRC_MAINCK_12M_RC) {
osc_enable(OSC_MAINCK_12M_RC);
osc_wait_ready(OSC_MAINCK_12M_RC);
pmc_switch_mck_to_mainck(CONFIG_SYSCLK_PRES);
}
else if (CONFIG_SYSCLK_SOURCE == SYSCLK_SRC_MAINCK_XTAL) {
osc_enable(OSC_MAINCK_XTAL);
osc_wait_ready(OSC_MAINCK_XTAL);
pmc_switch_mck_to_mainck(CONFIG_SYSCLK_PRES);
}
else if (CONFIG_SYSCLK_SOURCE == SYSCLK_SRC_MAINCK_BYPASS) {
osc_enable(OSC_MAINCK_BYPASS);
osc_wait_ready(OSC_MAINCK_BYPASS);
pmc_switch_mck_to_mainck(CONFIG_SYSCLK_PRES);
}
#ifdef CONFIG_PLL0_SOURCE
else if (CONFIG_SYSCLK_SOURCE == SYSCLK_SRC_PLLACK) {
struct pll_config pllcfg;
pll_enable_source(CONFIG_PLL0_SOURCE);
pll_config_defaults(&pllcfg, 0);
pll_enable(&pllcfg, 0);
pll_wait_for_lock(0);
pmc_switch_mck_to_pllack(CONFIG_SYSCLK_PRES);
}
#endif
/* Update the SystemFrequency variable */
SystemCoreClockUpdate();
/* Set a flash wait state depending on the new cpu frequency */
system_init_flash(sysclk_get_cpu_hz());
#if (defined CONFIG_SYSCLK_DEFAULT_RETURNS_SLOW_OSC)
/* Signal that the internal frequencies are setup */
sysclk_initialized = 1;
#endif
}
void sysclk_init(void)
{
struct pll_config pllcfg;
/* Set a flash wait state depending on the new cpu frequency */
system_init_flash(sysclk_get_cpu_hz());
/* Config system clock setting */
switch (CONFIG_SYSCLK_SOURCE) {
case SYSCLK_SRC_SLCK_RC:
osc_enable(OSC_SLCK_32K_RC);
osc_wait_ready(OSC_SLCK_32K_RC);
pmc_switch_mck_to_sclk(CONFIG_SYSCLK_PRES);
break;
case SYSCLK_SRC_SLCK_XTAL:
osc_enable(OSC_SLCK_32K_XTAL);
osc_wait_ready(OSC_SLCK_32K_XTAL);
pmc_switch_mck_to_sclk(CONFIG_SYSCLK_PRES);
break;
case SYSCLK_SRC_SLCK_BYPASS:
osc_enable(OSC_SLCK_32K_BYPASS);
osc_wait_ready(OSC_SLCK_32K_BYPASS);
pmc_switch_mck_to_sclk(CONFIG_SYSCLK_PRES);
break;
case SYSCLK_SRC_MAINCK_4M_RC:
/* Already running from SYSCLK_SRC_MAINCK_4M_RC */
break;
case SYSCLK_SRC_MAINCK_8M_RC:
osc_enable(OSC_MAINCK_8M_RC);
osc_wait_ready(OSC_MAINCK_8M_RC);
pmc_switch_mck_to_mainck(CONFIG_SYSCLK_PRES);
break;
case SYSCLK_SRC_MAINCK_12M_RC:
osc_enable(OSC_MAINCK_12M_RC);
osc_wait_ready(OSC_MAINCK_12M_RC);
pmc_switch_mck_to_mainck(CONFIG_SYSCLK_PRES);
break;
case SYSCLK_SRC_MAINCK_XTAL:
osc_enable(OSC_MAINCK_XTAL);
osc_wait_ready(OSC_MAINCK_XTAL);
pmc_switch_mck_to_mainck(CONFIG_SYSCLK_PRES);
break;
case SYSCLK_SRC_MAINCK_BYPASS:
osc_enable(OSC_MAINCK_BYPASS);
osc_wait_ready(OSC_MAINCK_BYPASS);
pmc_switch_mck_to_mainck(CONFIG_SYSCLK_PRES);
break;
#ifdef CONFIG_PLL0_SOURCE
case SYSCLK_SRC_PLLACK:
pll_enable_source(CONFIG_PLL0_SOURCE);
pll_config_defaults(&pllcfg, 0);
pll_enable(&pllcfg, 0);
pll_wait_for_lock(0);
pmc_switch_mck_to_pllack(CONFIG_SYSCLK_PRES);
break;
#endif
case SYSCLK_SRC_UPLLCK:
pll_enable_source(CONFIG_PLL1_SOURCE);
pll_config_defaults(&pllcfg, 1);
pll_enable(&pllcfg, 1);
pll_wait_for_lock(1);
pmc_switch_mck_to_upllck(CONFIG_SYSCLK_PRES);
break;
}
/* Update the SystemFrequency variable */
SystemCoreClockUpdate();
#if (defined CONFIG_SYSCLK_DEFAULT_RETURNS_SLOW_OSC)
/* Signal that the internal frequencies are setup */
sysclk_initialized = 1;
#endif
}
int main(void)
{
sysclk_init();
board_init();
/* Enable one wait state for flash access */
flashcalw_set_wait_state(1);
/*
* Configure systick for 200ms (CPU frequency / 5) at startup time.
*
* Note: CPU frequency will be changed with below clock switching.
*/
if (SysTick_Config(sysclk_get_cpu_hz() / 5)) {
while (1) { /* Capture error */
}
}
while (1) {
struct dfll_config dcfg;
struct pll_config pcfg;
/* avoid Cppcheck Warning */
UNUSED(pcfg);
/*
* Initial state: Running from RC80M with all
* prescalers set to 2 (Divide frequency by 4).
*/
wait_for_switches();
/*
* Divide CPU frequency by 8. This will make the LED
* blink half as fast.
*/
sysclk_set_prescalers(3, 3, 3, 3, 3);
wait_for_switches();
/*
* Switch to the DFLL running at ~48 MHz in Open Loop
* mode, with the CPU running at ~48 MHz.
*/
dfll_config_init_open_loop_mode(&dcfg);
dfll_config_tune_for_target_hz(&dcfg, 48000000);
dfll_enable_open_loop(&dcfg, 0);
sysclk_set_prescalers(1, 1, 1, 1, 1);
sysclk_set_source(SYSCLK_SRC_DFLL);
osc_disable(OSC_ID_RC80M);
wait_for_switches();
/*
* Switch to the slow clock with all prescalers
* disabled.
*/
sysclk_set_source(SYSCLK_SRC_RCSYS);
sysclk_set_prescalers(0, 0, 0, 0, 0);
dfll_disable_open_loop(0);
wait_for_switches();
/*
* Switch to the RCFAST clock with all prescalers
* disabled.
*/
osc_enable(OSC_ID_RCFAST);
sysclk_set_prescalers(0, 0, 0, 0, 0);
osc_wait_ready(OSC_ID_RCFAST);
sysclk_set_source(SYSCLK_SRC_RCFAST);
wait_for_switches();
/*
* Switch to the RC1M clock with all prescalers
* disabled.
*/
osc_enable(OSC_ID_RC1M);
sysclk_set_prescalers(0, 0, 0, 0, 0);
osc_wait_ready(OSC_ID_RC1M);
sysclk_set_source(SYSCLK_SRC_RC1M);
osc_disable(OSC_ID_RCFAST);
wait_for_switches();
/*
* Switch to external OSC0, if available.
*/
#ifdef BOARD_OSC0_HZ
osc_enable(OSC_ID_OSC0);
osc_wait_ready(OSC_ID_OSC0);
sysclk_set_source(SYSCLK_SRC_OSC0);
osc_disable(OSC_ID_RC1M);
wait_for_switches();
/*
* Switch to PLL0 running at 96 MHz. Use OSC0 as the
* source
*/
pll_config_init(&pcfg, PLL_SRC_OSC0, 1, 96000000 /
BOARD_OSC0_HZ);
pll_enable(&pcfg, 0);
sysclk_set_prescalers(2, 2, 2, 2, 2);
pll_wait_for_lock(0);
sysclk_set_source(SYSCLK_SRC_PLL0);
wait_for_switches();
#endif
/*
* Switch to the DFLL, using the 32 kHz oscillator as a
* reference if available, or failing that, the 115 kHz
* RCSYS oscillator.
*/
#ifdef BOARD_OSC32_HZ
osc_enable(OSC_ID_OSC32);
dfll_config_init_closed_loop_mode(&dcfg,
GENCLK_SRC_OSC32K, 1,
CONFIG_DFLL0_FREQ / BOARD_OSC32_HZ);
osc_wait_ready(OSC_ID_OSC32);
#else
dfll_config_init_closed_loop_mode(&dcfg,
GENCLK_SRC_RCSYS, 1,
CONFIG_DFLL0_FREQ / OSC_RCSYS_NOMINAL_HZ);
#endif
dfll_enable_closed_loop(&dcfg, 0);
sysclk_set_prescalers(1, 1, 1, 1, 1);
dfll_wait_for_fine_lock(0);
sysclk_set_source(SYSCLK_SRC_DFLL);
#ifdef BOARD_OSC0_HZ
osc_disable(OSC_ID_OSC0);
#endif
wait_for_switches();
/*
* Go back to the initial state and start over.
*/
osc_enable(OSC_ID_RC80M);
sysclk_set_prescalers(2, 2, 2, 2, 2);
osc_wait_ready(OSC_ID_RC80M);
sysclk_set_source(SYSCLK_SRC_RC80M);
dfll_disable_closed_loop(0);
#ifdef BOARD_OSC32_HZ
osc_disable(OSC_ID_OSC32);
#endif
}
}
/**
* \brief Test audio data transfer and receive.
*
* \param test Current test case.
*/
static void run_iis_test(const struct test_case *test)
{
uint32_t i;
struct iis_config config;
struct iis_dev_inst dev_inst;
struct genclk_config gencfg;
struct pll_config pcfg;
/* Set the GCLK according to the sample rate */
genclk_config_defaults(&gencfg, IISC_GCLK_NUM);
/* CPUCLK 48M */
pll_config_init(&pcfg, PLL_SRC_OSC0, 2, 96000000 /
BOARD_OSC0_HZ);
pll_enable(&pcfg, 0);
sysclk_set_prescalers(0, 0, 0, 0, 0);
pll_wait_for_lock(0);
sysclk_set_source(SYSCLK_SRC_PLL0);
/* GCLK according fs ratio */
genclk_enable_source(GENCLK_SRC_CLK_CPU);
genclk_config_set_source(&gencfg, GENCLK_SRC_CLK_CPU);
genclk_config_set_divider(&gencfg, 4);
genclk_enable(&gencfg, IISC_GCLK_NUM);
/* Set the configuration */
iis_get_config_defaults(&config);
config.data_format = IIS_DATE_16BIT_COMPACT;
config.slot_length = IIS_SLOT_LENGTH_16BIT;
config.fs_ratio = IIS_FS_RATE_256;
config.tx_channels = IIS_CHANNEL_STEREO;
config.rx_channels = IIS_CHANNEL_STEREO;
config.tx_dma = IIS_ONE_DMA_CHANNEL_FOR_BOTH_CHANNELS;
config.rx_dma = IIS_ONE_DMA_CHANNEL_FOR_BOTH_CHANNELS;
config.loopback = true;
iis_init(&dev_inst, IISC, &config);
/* Enable the IIS module. */
iis_enable(&dev_inst);
/* Config PDCA module */
pdca_enable(PDCA);
pdca_channel_set_config(PDCA_IISC_CHANNEL0, &pdca_iisc_config_tx);
pdca_channel_set_config(PDCA_IISC_CHANNEL1, &pdca_iisc_config_rx);
pdca_channel_write_load(PDCA_IISC_CHANNEL0,
(void *)output_samples, SOUND_SAMPLES / 2);
pdca_channel_write_load(PDCA_IISC_CHANNEL1,
(void *)input_samples, SOUND_SAMPLES / 2);
pdca_channel_enable(PDCA_IISC_CHANNEL0);
pdca_channel_enable(PDCA_IISC_CHANNEL1);
/* Enable the functions */
iis_enable_transmission(&dev_inst);
iis_enable_clocks(&dev_inst);
/**
* Since the transfer and receive timing is not under control, we
* need adjust here the enable sequence and add some delay
* functions if it's needed.
*/
delay_us(20);
iis_enable_reception(&dev_inst);
while (!(pdca_get_channel_status(PDCA_IISC_CHANNEL1)
== PDCA_CH_TRANSFER_COMPLETED)) {
}
/* Disable the PDCA module. */
pdca_channel_disable(PDCA_IISC_CHANNEL0);
pdca_channel_disable(PDCA_IISC_CHANNEL1);
pdca_disable(PDCA);
/* Disable the IISC module. */
iis_disable(&dev_inst);
for (i = 0; i < SOUND_SAMPLES; i++) {
if (input_samples[i] != output_samples[i]) {
flag = false;
}
}
test_assert_true(test, flag == true, "Audio data did not match!");
}
