static ssize_t store_ehci_power(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct platform_device *pdev = to_platform_device(dev);
struct s5p_ehci_platdata *pdata = pdev->dev.platform_data;
struct s5p_ehci_hcd *s5p_ehci = platform_get_drvdata(pdev);
struct usb_hcd *hcd = s5p_ehci->hcd;
int power_on;
int irq;
int retval;
if (sscanf(buf, "%d", &power_on) != 1)
return -EINVAL;
device_lock(dev);
if (!power_on && s5p_ehci->power_on) {
printk(KERN_DEBUG "%s: EHCI turns off\n", __func__);
pm_runtime_forbid(dev);
s5p_ehci->power_on = 0;
usb_remove_hcd(hcd);
if (pdata && pdata->phy_exit)
pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
#if defined(CONFIG_LINK_DEVICE_HSIC) || defined(CONFIG_LINK_DEVICE_USB)
/*HSIC IPC control the ACTIVE_STATE*/
if (pdata && pdata->noti_host_states)
pdata->noti_host_states(pdev, S5P_HOST_OFF);
#endif
} else if (power_on) {
printk(KERN_DEBUG "%s: EHCI turns on\n", __func__);
if (s5p_ehci->power_on) {
pm_runtime_forbid(dev);
usb_remove_hcd(hcd);
#if defined(CONFIG_LINK_DEVICE_HSIC) || defined(CONFIG_LINK_DEVICE_USB)
/*HSIC IPC control the ACTIVE_STATE*/
if (pdata && pdata->noti_host_states)
pdata->noti_host_states(pdev, S5P_HOST_OFF);
#endif
} else
s5p_ehci_phy_init(pdev);
irq = platform_get_irq(pdev, 0);
retval = usb_add_hcd(hcd, irq,
IRQF_DISABLED | IRQF_SHARED);
if (retval < 0) {
dev_err(dev, "Power On Fail\n");
goto exit;
}
s5p_ehci->power_on = 1;
#if defined(CONFIG_LINK_DEVICE_HSIC) || defined(CONFIG_LINK_DEVICE_USB)
/* Sometimes XMM6262 send remote wakeup when hub enter suspend
* So, set the hub waiting 500ms autosuspend delay*/
if (hcd->self.root_hub)
pm_runtime_set_autosuspend_delay(
&hcd->self.root_hub->dev,
msecs_to_jiffies(500));
/*HSIC IPC control the ACTIVE_STATE*/
if (pdata && pdata->noti_host_states)
pdata->noti_host_states(pdev, S5P_HOST_ON);
#endif
pm_runtime_allow(dev);
}
exit:
device_unlock(dev);
return count;
}
static int __devinit s5p_ehci_probe(struct platform_device *pdev)
{
struct s5p_ehci_platdata *pdata;
struct s5p_ehci_hcd *s5p_ehci;
struct usb_hcd *hcd;
struct ehci_hcd *ehci;
struct resource *res;
int irq;
int err;
pdata = pdev->dev.platform_data;
if (!pdata) {
dev_err(&pdev->dev, "No platform data defined\n");
return -EINVAL;
}
s5p_ehci = kzalloc(sizeof(struct s5p_ehci_hcd), GFP_KERNEL);
if (!s5p_ehci)
return -ENOMEM;
s5p_ehci->dev = &pdev->dev;
hcd = usb_create_hcd(&s5p_ehci_hc_driver, &pdev->dev,
dev_name(&pdev->dev));
if (!hcd) {
dev_err(&pdev->dev, "Unable to create HCD\n");
err = -ENOMEM;
goto fail_hcd;
}
s5p_ehci->hcd = hcd;
s5p_ehci->clk = clk_get(&pdev->dev, "usbhost");
if (IS_ERR(s5p_ehci->clk)) {
dev_err(&pdev->dev, "Failed to get usbhost clock\n");
err = PTR_ERR(s5p_ehci->clk);
goto fail_clk;
}
err = clk_enable(s5p_ehci->clk);
if (err)
goto fail_clken;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "Failed to get I/O memory\n");
err = -ENXIO;
goto fail_io;
}
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
hcd->regs = ioremap(res->start, resource_size(res));
if (!hcd->regs) {
dev_err(&pdev->dev, "Failed to remap I/O memory\n");
err = -ENOMEM;
goto fail_io;
}
irq = platform_get_irq(pdev, 0);
if (!irq) {
dev_err(&pdev->dev, "Failed to get IRQ\n");
err = -ENODEV;
goto fail;
}
platform_set_drvdata(pdev, s5p_ehci);
s5p_ehci_phy_init(pdev);
ehci = hcd_to_ehci(hcd);
ehci->caps = hcd->regs;
ehci->regs = hcd->regs +
HC_LENGTH(ehci, readl(&ehci->caps->hc_capbase));
dbg_hcs_params(ehci, "reset");
dbg_hcc_params(ehci, "reset");
/* cache this readonly data; minimize chip reads */
ehci->hcs_params = readl(&ehci->caps->hcs_params);
err = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
if (err) {
dev_err(&pdev->dev, "Failed to add USB HCD\n");
goto fail;
}
create_ehci_sys_file(ehci);
s5p_ehci->power_on = 1;
#ifdef CONFIG_USB_SUSPEND
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
#endif
#ifdef CONFIG_MDM_HSIC_PM
/*
set_host_stat(hsic_pm_dev, POWER_ON);
*/
pm_runtime_allow(&pdev->dev);
pm_runtime_set_autosuspend_delay(&hcd->self.root_hub->dev, 0);
pm_runtime_forbid(&pdev->dev);
enable_periodic(ehci);
#endif
#if defined(CONFIG_LINK_DEVICE_HSIC) || defined(CONFIG_LINK_DEVICE_USB)
if (num_possible_cpus() > 1) {
s5p_ehci_irq_no = irq;
s5p_ehci_irq_cpu = s5p_ehci_cpus[num_possible_cpus() - 1];
irq_set_affinity(s5p_ehci_irq_no, cpumask_of(s5p_ehci_irq_cpu));
register_cpu_notifier(&s5p_ehci_cpu_notifier);
}
/* for cp enumeration */
pm_runtime_forbid(&pdev->dev);
/*HSIC IPC control the ACTIVE_STATE*/
if (pdata && pdata->noti_host_states)
pdata->noti_host_states(pdev, S5P_HOST_ON);
#endif
return 0;
fail:
iounmap(hcd->regs);
fail_io:
clk_disable(s5p_ehci->clk);
fail_clken:
clk_put(s5p_ehci->clk);
fail_clk:
usb_put_hcd(hcd);
fail_hcd:
kfree(s5p_ehci);
return err;
}
/**
* radeon_driver_load_kms - Main load function for KMS.
*
* @dev: drm dev pointer
* @flags: device flags
*
* This is the main load function for KMS (all asics).
* It calls radeon_device_init() to set up the non-display
* parts of the chip (asic init, CP, writeback, etc.), and
* radeon_modeset_init() to set up the display parts
* (crtcs, encoders, hotplug detect, etc.).
* Returns 0 on success, error on failure.
*/
int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags)
{
struct radeon_device *rdev;
int r, acpi_status;
rdev = kzalloc(sizeof(struct radeon_device), GFP_KERNEL);
if (rdev == NULL) {
return -ENOMEM;
}
dev->dev_private = (void *)rdev;
/* update BUS flag */
if (drm_pci_device_is_agp(dev)) {
flags |= RADEON_IS_AGP;
} else if (pci_is_pcie(dev->pdev)) {
flags |= RADEON_IS_PCIE;
} else {
flags |= RADEON_IS_PCI;
}
/* radeon_device_init should report only fatal error
* like memory allocation failure or iomapping failure,
* or memory manager initialization failure, it must
* properly initialize the GPU MC controller and permit
* VRAM allocation
*/
r = radeon_device_init(rdev, dev, dev->pdev, flags);
if (r) {
dev_err(&dev->pdev->dev, "Fatal error during GPU init\n");
goto out;
}
/* Again modeset_init should fail only on fatal error
* otherwise it should provide enough functionalities
* for shadowfb to run
*/
r = radeon_modeset_init(rdev);
if (r)
dev_err(&dev->pdev->dev, "Fatal error during modeset init\n");
/* Call ACPI methods: require modeset init
* but failure is not fatal
*/
if (!r) {
acpi_status = radeon_acpi_init(rdev);
if (acpi_status)
dev_dbg(&dev->pdev->dev,
"Error during ACPI methods call\n");
}
if (radeon_runtime_pm != 0) {
pm_runtime_use_autosuspend(dev->dev);
pm_runtime_set_autosuspend_delay(dev->dev, 5000);
pm_runtime_set_active(dev->dev);
pm_runtime_allow(dev->dev);
pm_runtime_mark_last_busy(dev->dev);
pm_runtime_put_autosuspend(dev->dev);
}
out:
if (r)
radeon_driver_unload_kms(dev);
return r;
}
int arizona_dev_init(struct arizona *arizona)
{
struct device *dev = arizona->dev;
const char *type_name;
unsigned int reg, val;
int (*apply_patch)(struct arizona *) = NULL;
int ret, i;
dev_set_drvdata(arizona->dev, arizona);
mutex_init(&arizona->clk_lock);
if (dev_get_platdata(arizona->dev))
memcpy(&arizona->pdata, dev_get_platdata(arizona->dev),
sizeof(arizona->pdata));
else
arizona_of_get_core_pdata(arizona);
regcache_cache_only(arizona->regmap, true);
switch (arizona->type) {
case WM5102:
case WM5110:
case WM8997:
for (i = 0; i < ARRAY_SIZE(wm5102_core_supplies); i++)
arizona->core_supplies[i].supply
= wm5102_core_supplies[i];
arizona->num_core_supplies = ARRAY_SIZE(wm5102_core_supplies);
break;
default:
dev_err(arizona->dev, "Unknown device type %d\n",
arizona->type);
return -EINVAL;
}
ret = mfd_add_devices(arizona->dev, -1, early_devs,
ARRAY_SIZE(early_devs), NULL, 0, NULL);
if (ret != 0) {
dev_err(dev, "Failed to add early children: %d\n", ret);
return ret;
}
ret = devm_regulator_bulk_get(dev, arizona->num_core_supplies,
arizona->core_supplies);
if (ret != 0) {
dev_err(dev, "Failed to request core supplies: %d\n",
ret);
goto err_early;
}
arizona->dcvdd = devm_regulator_get(arizona->dev, "DCVDD");
if (IS_ERR(arizona->dcvdd)) {
ret = PTR_ERR(arizona->dcvdd);
dev_err(dev, "Failed to request DCVDD: %d\n", ret);
goto err_early;
}
if (arizona->pdata.reset) {
/* Start out with /RESET low to put the chip into reset */
ret = gpio_request_one(arizona->pdata.reset,
GPIOF_DIR_OUT | GPIOF_INIT_LOW,
"arizona /RESET");
if (ret != 0) {
dev_err(dev, "Failed to request /RESET: %d\n", ret);
goto err_early;
}
}
ret = regulator_bulk_enable(arizona->num_core_supplies,
arizona->core_supplies);
if (ret != 0) {
dev_err(dev, "Failed to enable core supplies: %d\n",
ret);
goto err_early;
}
ret = regulator_enable(arizona->dcvdd);
if (ret != 0) {
dev_err(dev, "Failed to enable DCVDD: %d\n", ret);
goto err_enable;
}
if (arizona->pdata.reset) {
gpio_set_value_cansleep(arizona->pdata.reset, 1);
msleep(1);
}
regcache_cache_only(arizona->regmap, false);
/* Verify that this is a chip we know about */
ret = regmap_read(arizona->regmap, ARIZONA_SOFTWARE_RESET, ®);
if (ret != 0) {
dev_err(dev, "Failed to read ID register: %d\n", ret);
goto err_reset;
}
switch (reg) {
case 0x5102:
case 0x5110:
case 0x8997:
break;
default:
dev_err(arizona->dev, "Unknown device ID: %x\n", reg);
goto err_reset;
}
/* If we have a /RESET GPIO we'll already be reset */
if (!arizona->pdata.reset) {
regcache_mark_dirty(arizona->regmap);
ret = regmap_write(arizona->regmap, ARIZONA_SOFTWARE_RESET, 0);
if (ret != 0) {
dev_err(dev, "Failed to reset device: %d\n", ret);
goto err_reset;
}
msleep(1);
ret = regcache_sync(arizona->regmap);
if (ret != 0) {
dev_err(dev, "Failed to sync device: %d\n", ret);
goto err_reset;
}
}
/* Ensure device startup is complete */
switch (arizona->type) {
case WM5102:
ret = regmap_read(arizona->regmap, 0x19, &val);
if (ret != 0)
dev_err(dev,
"Failed to check write sequencer state: %d\n",
ret);
else if (val & 0x01)
break;
/* Fall through */
default:
ret = arizona_wait_for_boot(arizona);
if (ret != 0) {
dev_err(arizona->dev,
"Device failed initial boot: %d\n", ret);
goto err_reset;
}
break;
}
/* Read the device ID information & do device specific stuff */
ret = regmap_read(arizona->regmap, ARIZONA_SOFTWARE_RESET, ®);
if (ret != 0) {
dev_err(dev, "Failed to read ID register: %d\n", ret);
goto err_reset;
}
ret = regmap_read(arizona->regmap, ARIZONA_DEVICE_REVISION,
&arizona->rev);
if (ret != 0) {
dev_err(dev, "Failed to read revision register: %d\n", ret);
goto err_reset;
}
arizona->rev &= ARIZONA_DEVICE_REVISION_MASK;
switch (reg) {
#ifdef CONFIG_MFD_WM5102
case 0x5102:
type_name = "WM5102";
if (arizona->type != WM5102) {
dev_err(arizona->dev, "WM5102 registered as %d\n",
arizona->type);
arizona->type = WM5102;
}
apply_patch = wm5102_patch;
arizona->rev &= 0x7;
break;
#endif
#ifdef CONFIG_MFD_WM5110
case 0x5110:
type_name = "WM5110";
if (arizona->type != WM5110) {
dev_err(arizona->dev, "WM5110 registered as %d\n",
arizona->type);
arizona->type = WM5110;
}
apply_patch = wm5110_patch;
break;
#endif
#ifdef CONFIG_MFD_WM8997
case 0x8997:
type_name = "WM8997";
if (arizona->type != WM8997) {
dev_err(arizona->dev, "WM8997 registered as %d\n",
arizona->type);
arizona->type = WM8997;
}
apply_patch = wm8997_patch;
break;
#endif
default:
dev_err(arizona->dev, "Unknown device ID %x\n", reg);
goto err_reset;
}
dev_info(dev, "%s revision %c\n", type_name, arizona->rev + 'A');
if (apply_patch) {
ret = apply_patch(arizona);
if (ret != 0) {
dev_err(arizona->dev, "Failed to apply patch: %d\n",
ret);
goto err_reset;
}
switch (arizona->type) {
case WM5102:
ret = arizona_apply_hardware_patch(arizona);
if (ret != 0) {
dev_err(arizona->dev,
"Failed to apply hardware patch: %d\n",
ret);
goto err_reset;
}
break;
default:
break;
}
}
for (i = 0; i < ARRAY_SIZE(arizona->pdata.gpio_defaults); i++) {
if (!arizona->pdata.gpio_defaults[i])
continue;
regmap_write(arizona->regmap, ARIZONA_GPIO1_CTRL + i,
arizona->pdata.gpio_defaults[i]);
}
/*
* LDO1 can only be used to supply DCVDD so if it has no
* consumers then DCVDD is supplied externally.
*/
if (arizona->pdata.ldo1 &&
arizona->pdata.ldo1->num_consumer_supplies == 0)
arizona->external_dcvdd = true;
pm_runtime_set_autosuspend_delay(arizona->dev, 100);
pm_runtime_use_autosuspend(arizona->dev);
pm_runtime_enable(arizona->dev);
/* Chip default */
if (!arizona->pdata.clk32k_src)
arizona->pdata.clk32k_src = ARIZONA_32KZ_MCLK2;
switch (arizona->pdata.clk32k_src) {
case ARIZONA_32KZ_MCLK1:
case ARIZONA_32KZ_MCLK2:
regmap_update_bits(arizona->regmap, ARIZONA_CLOCK_32K_1,
ARIZONA_CLK_32K_SRC_MASK,
arizona->pdata.clk32k_src - 1);
arizona_clk32k_enable(arizona);
break;
case ARIZONA_32KZ_NONE:
regmap_update_bits(arizona->regmap, ARIZONA_CLOCK_32K_1,
ARIZONA_CLK_32K_SRC_MASK, 2);
break;
default:
dev_err(arizona->dev, "Invalid 32kHz clock source: %d\n",
arizona->pdata.clk32k_src);
ret = -EINVAL;
goto err_reset;
}
for (i = 0; i < ARIZONA_MAX_MICBIAS; i++) {
if (!arizona->pdata.micbias[i].mV &&
!arizona->pdata.micbias[i].bypass)
continue;
/* Apply default for bypass mode */
if (!arizona->pdata.micbias[i].mV)
arizona->pdata.micbias[i].mV = 2800;
val = (arizona->pdata.micbias[i].mV - 1500) / 100;
val <<= ARIZONA_MICB1_LVL_SHIFT;
if (arizona->pdata.micbias[i].ext_cap)
val |= ARIZONA_MICB1_EXT_CAP;
if (arizona->pdata.micbias[i].discharge)
val |= ARIZONA_MICB1_DISCH;
if (arizona->pdata.micbias[i].soft_start)
val |= ARIZONA_MICB1_RATE;
if (arizona->pdata.micbias[i].bypass)
val |= ARIZONA_MICB1_BYPASS;
regmap_update_bits(arizona->regmap,
ARIZONA_MIC_BIAS_CTRL_1 + i,
ARIZONA_MICB1_LVL_MASK |
ARIZONA_MICB1_DISCH |
ARIZONA_MICB1_BYPASS |
ARIZONA_MICB1_RATE, val);
}
for (i = 0; i < ARIZONA_MAX_INPUT; i++) {
/* Default for both is 0 so noop with defaults */
val = arizona->pdata.dmic_ref[i]
<< ARIZONA_IN1_DMIC_SUP_SHIFT;
val |= arizona->pdata.inmode[i] << ARIZONA_IN1_MODE_SHIFT;
regmap_update_bits(arizona->regmap,
ARIZONA_IN1L_CONTROL + (i * 8),
ARIZONA_IN1_DMIC_SUP_MASK |
ARIZONA_IN1_MODE_MASK, val);
}
for (i = 0; i < ARIZONA_MAX_OUTPUT; i++) {
/* Default is 0 so noop with defaults */
if (arizona->pdata.out_mono[i])
val = ARIZONA_OUT1_MONO;
else
val = 0;
regmap_update_bits(arizona->regmap,
ARIZONA_OUTPUT_PATH_CONFIG_1L + (i * 8),
ARIZONA_OUT1_MONO, val);
}
for (i = 0; i < ARIZONA_MAX_PDM_SPK; i++) {
if (arizona->pdata.spk_mute[i])
regmap_update_bits(arizona->regmap,
ARIZONA_PDM_SPK1_CTRL_1 + (i * 2),
ARIZONA_SPK1_MUTE_ENDIAN_MASK |
ARIZONA_SPK1_MUTE_SEQ1_MASK,
arizona->pdata.spk_mute[i]);
if (arizona->pdata.spk_fmt[i])
regmap_update_bits(arizona->regmap,
ARIZONA_PDM_SPK1_CTRL_2 + (i * 2),
ARIZONA_SPK1_FMT_MASK,
arizona->pdata.spk_fmt[i]);
}
/* Set up for interrupts */
ret = arizona_irq_init(arizona);
if (ret != 0)
goto err_reset;
arizona_request_irq(arizona, ARIZONA_IRQ_CLKGEN_ERR, "CLKGEN error",
arizona_clkgen_err, arizona);
arizona_request_irq(arizona, ARIZONA_IRQ_OVERCLOCKED, "Overclocked",
arizona_overclocked, arizona);
arizona_request_irq(arizona, ARIZONA_IRQ_UNDERCLOCKED, "Underclocked",
arizona_underclocked, arizona);
switch (arizona->type) {
case WM5102:
ret = mfd_add_devices(arizona->dev, -1, wm5102_devs,
ARRAY_SIZE(wm5102_devs), NULL, 0, NULL);
break;
case WM5110:
ret = mfd_add_devices(arizona->dev, -1, wm5110_devs,
ARRAY_SIZE(wm5110_devs), NULL, 0, NULL);
break;
case WM8997:
ret = mfd_add_devices(arizona->dev, -1, wm8997_devs,
ARRAY_SIZE(wm8997_devs), NULL, 0, NULL);
break;
}
if (ret != 0) {
dev_err(arizona->dev, "Failed to add subdevices: %d\n", ret);
goto err_irq;
}
#ifdef CONFIG_PM_RUNTIME
regulator_disable(arizona->dcvdd);
#endif
return 0;
err_irq:
arizona_irq_exit(arizona);
err_reset:
if (arizona->pdata.reset) {
gpio_set_value_cansleep(arizona->pdata.reset, 0);
gpio_free(arizona->pdata.reset);
}
regulator_disable(arizona->dcvdd);
err_enable:
regulator_bulk_disable(arizona->num_core_supplies,
arizona->core_supplies);
err_early:
mfd_remove_devices(dev);
return ret;
}
/**
* mei_me_probe - Device Initialization Routine
*
* @pdev: PCI device structure
* @ent: entry in kcs_pci_tbl
*
* Return: 0 on success, <0 on failure.
*/
static int mei_me_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
const struct mei_cfg *cfg = (struct mei_cfg *)(ent->driver_data);
struct mei_device *dev;
struct mei_me_hw *hw;
int err;
if (!mei_me_quirk_probe(pdev, cfg))
return -ENODEV;
/* enable pci dev */
err = pci_enable_device(pdev);
if (err) {
dev_err(&pdev->dev, "failed to enable pci device.\n");
goto end;
}
/* set PCI host mastering */
pci_set_master(pdev);
/* pci request regions for mei driver */
err = pci_request_regions(pdev, KBUILD_MODNAME);
if (err) {
dev_err(&pdev->dev, "failed to get pci regions.\n");
goto disable_device;
}
if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) ||
dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) {
err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
if (err)
err = dma_set_coherent_mask(&pdev->dev,
DMA_BIT_MASK(32));
}
if (err) {
dev_err(&pdev->dev, "No usable DMA configuration, aborting\n");
goto release_regions;
}
/* allocates and initializes the mei dev structure */
dev = mei_me_dev_init(pdev, cfg);
if (!dev) {
err = -ENOMEM;
goto release_regions;
}
hw = to_me_hw(dev);
/* mapping IO device memory */
hw->mem_addr = pci_iomap(pdev, 0, 0);
if (!hw->mem_addr) {
dev_err(&pdev->dev, "mapping I/O device memory failure.\n");
err = -ENOMEM;
goto free_device;
}
if (!disable_msi)
pci_enable_msi(pdev);
/* request and enable interrupt */
if (pci_dev_msi_enabled(pdev))
err = request_threaded_irq(pdev->irq,
NULL,
mei_me_irq_thread_handler,
IRQF_ONESHOT, KBUILD_MODNAME, dev);
else
err = request_threaded_irq(pdev->irq,
mei_me_irq_quick_handler,
mei_me_irq_thread_handler,
IRQF_SHARED, KBUILD_MODNAME, dev);
if (err) {
dev_err(&pdev->dev, "request_threaded_irq failure. irq = %d\n",
pdev->irq);
goto disable_msi;
}
if (mei_start(dev)) {
dev_err(&pdev->dev, "init hw failure.\n");
err = -ENODEV;
goto release_irq;
}
pm_runtime_set_autosuspend_delay(&pdev->dev, MEI_ME_RPM_TIMEOUT);
pm_runtime_use_autosuspend(&pdev->dev);
err = mei_register(dev, &pdev->dev);
if (err)
goto release_irq;
pci_set_drvdata(pdev, dev);
schedule_delayed_work(&dev->timer_work, HZ);
/*
* For not wake-able HW runtime pm framework
* can't be used on pci device level.
* Use domain runtime pm callbacks instead.
*/
if (!pci_dev_run_wake(pdev))
mei_me_set_pm_domain(dev);
if (mei_pg_is_enabled(dev))
pm_runtime_put_noidle(&pdev->dev);
dev_dbg(&pdev->dev, "initialization successful.\n");
return 0;
release_irq:
mei_cancel_work(dev);
mei_disable_interrupts(dev);
free_irq(pdev->irq, dev);
disable_msi:
pci_disable_msi(pdev);
pci_iounmap(pdev, hw->mem_addr);
free_device:
kfree(dev);
release_regions:
pci_release_regions(pdev);
disable_device:
pci_disable_device(pdev);
end:
dev_err(&pdev->dev, "initialization failed.\n");
return err;
}
static int sdhci_s3c_probe(struct platform_device *pdev)
{
struct s3c_sdhci_platdata *pdata;
struct sdhci_s3c_drv_data *drv_data;
struct device *dev = &pdev->dev;
struct sdhci_host *host;
struct sdhci_s3c *sc;
struct resource *res;
int ret, irq, ptr, clks;
if (!pdev->dev.platform_data && !pdev->dev.of_node) {
dev_err(dev, "no device data specified\n");
return -ENOENT;
}
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(dev, "no irq specified\n");
return irq;
}
host = sdhci_alloc_host(dev, sizeof(struct sdhci_s3c));
if (IS_ERR(host)) {
dev_err(dev, "sdhci_alloc_host() failed\n");
return PTR_ERR(host);
}
sc = sdhci_priv(host);
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata) {
ret = -ENOMEM;
goto err_pdata_io_clk;
}
if (pdev->dev.of_node) {
ret = sdhci_s3c_parse_dt(&pdev->dev, host, pdata);
if (ret)
goto err_pdata_io_clk;
} else {
memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata));
sc->ext_cd_gpio = -1; /* invalid gpio number */
}
drv_data = sdhci_s3c_get_driver_data(pdev);
sc->host = host;
sc->pdev = pdev;
sc->pdata = pdata;
platform_set_drvdata(pdev, host);
sc->clk_io = devm_clk_get(dev, "hsmmc");
if (IS_ERR(sc->clk_io)) {
dev_err(dev, "failed to get io clock\n");
ret = PTR_ERR(sc->clk_io);
goto err_pdata_io_clk;
}
/* enable the local io clock and keep it running for the moment. */
clk_prepare_enable(sc->clk_io);
for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
struct clk *clk;
char name[14];
snprintf(name, 14, "mmc_busclk.%d", ptr);
clk = devm_clk_get(dev, name);
if (IS_ERR(clk))
continue;
clks++;
sc->clk_bus[ptr] = clk;
/*
* save current clock index to know which clock bus
* is used later in overriding functions.
*/
sc->cur_clk = ptr;
dev_info(dev, "clock source %d: %s (%ld Hz)\n",
ptr, name, clk_get_rate(clk));
}
if (clks == 0) {
dev_err(dev, "failed to find any bus clocks\n");
ret = -ENOENT;
goto err_no_busclks;
}
#ifndef CONFIG_PM_RUNTIME
clk_prepare_enable(sc->clk_bus[sc->cur_clk]);
#endif
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
host->ioaddr = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(host->ioaddr)) {
ret = PTR_ERR(host->ioaddr);
goto err_req_regs;
}
/* Ensure we have minimal gpio selected CMD/CLK/Detect */
if (pdata->cfg_gpio)
pdata->cfg_gpio(pdev, pdata->max_width);
host->hw_name = "samsung-hsmmc";
host->ops = &sdhci_s3c_ops;
host->quirks = 0;
host->irq = irq;
/* Setup quirks for the controller */
host->quirks |= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC;
host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
if (drv_data)
host->quirks |= drv_data->sdhci_quirks;
#ifndef CONFIG_MMC_SDHCI_S3C_DMA
/* we currently see overruns on errors, so disable the SDMA
* support as well. */
host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
#endif /* CONFIG_MMC_SDHCI_S3C_DMA */
/* It seems we do not get an DATA transfer complete on non-busy
* transfers, not sure if this is a problem with this specific
* SDHCI block, or a missing configuration that needs to be set. */
host->quirks |= SDHCI_QUIRK_NO_BUSY_IRQ;
/* This host supports the Auto CMD12 */
host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
/* Samsung SoCs need BROKEN_ADMA_ZEROLEN_DESC */
host->quirks |= SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC;
if (pdata->cd_type == S3C_SDHCI_CD_NONE ||
pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
if (pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
host->mmc->caps = MMC_CAP_NONREMOVABLE;
switch (pdata->max_width) {
case 8:
host->mmc->caps |= MMC_CAP_8_BIT_DATA;
case 4:
host->mmc->caps |= MMC_CAP_4_BIT_DATA;
break;
}
if (pdata->pm_caps)
host->mmc->pm_caps |= pdata->pm_caps;
host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR |
SDHCI_QUIRK_32BIT_DMA_SIZE);
/* HSMMC on Samsung SoCs uses SDCLK as timeout clock */
host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK;
/*
* If controller does not have internal clock divider,
* we can use overriding functions instead of default.
*/
if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK) {
sdhci_s3c_ops.set_clock = sdhci_cmu_set_clock;
sdhci_s3c_ops.get_min_clock = sdhci_cmu_get_min_clock;
sdhci_s3c_ops.get_max_clock = sdhci_cmu_get_max_clock;
}
/* It supports additional host capabilities if needed */
if (pdata->host_caps)
host->mmc->caps |= pdata->host_caps;
if (pdata->host_caps2)
host->mmc->caps2 |= pdata->host_caps2;
pm_runtime_enable(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
pm_runtime_use_autosuspend(&pdev->dev);
pm_suspend_ignore_children(&pdev->dev, 1);
ret = sdhci_add_host(host);
if (ret) {
dev_err(dev, "sdhci_add_host() failed\n");
pm_runtime_forbid(&pdev->dev);
pm_runtime_get_noresume(&pdev->dev);
goto err_req_regs;
}
/* The following two methods of card detection might call
sdhci_s3c_notify_change() immediately, so they can be called
only after sdhci_add_host(). Setup errors are ignored. */
if (pdata->cd_type == S3C_SDHCI_CD_EXTERNAL && pdata->ext_cd_init)
pdata->ext_cd_init(&sdhci_s3c_notify_change);
if (pdata->cd_type == S3C_SDHCI_CD_GPIO &&
gpio_is_valid(pdata->ext_cd_gpio))
sdhci_s3c_setup_card_detect_gpio(sc);
#ifdef CONFIG_PM_RUNTIME
if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
clk_disable_unprepare(sc->clk_io);
#endif
return 0;
err_req_regs:
#ifndef CONFIG_PM_RUNTIME
clk_disable_unprepare(sc->clk_bus[sc->cur_clk]);
#endif
err_no_busclks:
clk_disable_unprepare(sc->clk_io);
err_pdata_io_clk:
sdhci_free_host(host);
return ret;
}
/**
* usb_alloc_dev - usb device constructor (usbcore-internal)
* @parent: hub to which device is connected; null to allocate a root hub
* @bus: bus used to access the device
* @port1: one-based index of port; ignored for root hubs
* Context: !in_interrupt()
*
* Only hub drivers (including virtual root hub drivers for host
* controllers) should ever call this.
*
* This call may not be used in a non-sleeping context.
*/
struct usb_device *usb_alloc_dev(struct usb_device *parent,
struct usb_bus *bus, unsigned port1)
{
struct usb_device *dev;
struct usb_hcd *usb_hcd = container_of(bus, struct usb_hcd, self);
unsigned root_hub = 0;
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return NULL;
if (!usb_get_hcd(bus_to_hcd(bus))) {
kfree(dev);
return NULL;
}
/* Root hubs aren't true devices, so don't allocate HCD resources */
if (usb_hcd->driver->alloc_dev && parent &&
!usb_hcd->driver->alloc_dev(usb_hcd, dev)) {
usb_put_hcd(bus_to_hcd(bus));
kfree(dev);
return NULL;
}
device_initialize(&dev->dev);
dev->dev.bus = &usb_bus_type;
dev->dev.type = &usb_device_type;
dev->dev.groups = usb_device_groups;
dev->dev.dma_mask = bus->controller->dma_mask;
set_dev_node(&dev->dev, dev_to_node(bus->controller));
dev->state = USB_STATE_ATTACHED;
atomic_set(&dev->urbnum, 0);
INIT_LIST_HEAD(&dev->ep0.urb_list);
dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE;
dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT;
/* ep0 maxpacket comes later, from device descriptor */
usb_enable_endpoint(dev, &dev->ep0, false);
dev->can_submit = 1;
/* Save readable and stable topology id, distinguishing devices
* by location for diagnostics, tools, driver model, etc. The
* string is a path along hub ports, from the root. Each device's
* dev->devpath will be stable until USB is re-cabled, and hubs
* are often labeled with these port numbers. The name isn't
* as stable: bus->busnum changes easily from modprobe order,
* cardbus or pci hotplugging, and so on.
*/
if (unlikely(!parent)) {
dev->devpath[0] = '0';
dev->route = 0;
dev->dev.parent = bus->controller;
dev_set_name(&dev->dev, "usb%d", bus->busnum);
root_hub = 1;
} else {
/* match any labeling on the hubs; it's one-based */
if (parent->devpath[0] == '0') {
snprintf(dev->devpath, sizeof dev->devpath,
"%d", port1);
/* Root ports are not counted in route string */
dev->route = 0;
} else {
snprintf(dev->devpath, sizeof dev->devpath,
"%s.%d", parent->devpath, port1);
/* Route string assumes hubs have less than 16 ports */
if (port1 < 15)
dev->route = parent->route +
(port1 << ((parent->level - 1)*4));
else
dev->route = parent->route +
(15 << ((parent->level - 1)*4));
}
dev->dev.parent = &parent->dev;
dev_set_name(&dev->dev, "%d-%s", bus->busnum, dev->devpath);
/* hub driver sets up TT records */
}
dev->portnum = port1;
dev->bus = bus;
dev->parent = parent;
INIT_LIST_HEAD(&dev->filelist);
#ifdef CONFIG_PM
#ifdef CONFIG_USB_SUSPEND
/* enabling auto suspend does not disabling
* the clocks properly during suspend
*/
if (cpu_is_omap34xx())
usb_autosuspend_delay = 0;
#endif
pm_runtime_set_autosuspend_delay(&dev->dev,
usb_autosuspend_delay * 1000);
dev->connect_time = jiffies;
dev->active_duration = -jiffies;
#endif
if (root_hub) /* Root hub always ok [and always wired] */
dev->authorized = 1;
else {
dev->authorized = usb_hcd->authorized_default;
dev->wusb = usb_bus_is_wusb(bus)? 1 : 0;
}
return dev;
}
/*
* Probe a i2400m interface and register it
*
* @iface: USB interface to link to
* @id: USB class/subclass/protocol id
* @returns: 0 if ok, < 0 errno code on error.
*
* Alloc a net device, initialize the bus-specific details and then
* calls the bus-generic initialization routine. That will register
* the wimax and netdev devices, upload the firmware [using
* _bus_bm_*()], call _bus_dev_start() to finalize the setup of the
* communication with the device and then will start to talk to it to
* finnish setting it up.
*/
static
int i2400mu_probe(struct usb_interface *iface,
const struct usb_device_id *id)
{
int result;
struct net_device *net_dev;
struct device *dev = &iface->dev;
struct i2400m *i2400m;
struct i2400mu *i2400mu;
struct usb_device *usb_dev = interface_to_usbdev(iface);
if (usb_dev->speed != USB_SPEED_HIGH)
dev_err(dev, "device not connected as high speed\n");
/* Allocate instance [calls i2400m_netdev_setup() on it]. */
result = -ENOMEM;
net_dev = alloc_netdev(sizeof(*i2400mu), "wmx%d",
i2400mu_netdev_setup);
if (net_dev == NULL) {
dev_err(dev, "no memory for network device instance\n");
goto error_alloc_netdev;
}
SET_NETDEV_DEV(net_dev, dev);
SET_NETDEV_DEVTYPE(net_dev, &i2400mu_type);
i2400m = net_dev_to_i2400m(net_dev);
i2400mu = container_of(i2400m, struct i2400mu, i2400m);
i2400m->wimax_dev.net_dev = net_dev;
i2400mu->usb_dev = usb_get_dev(usb_dev);
i2400mu->usb_iface = iface;
usb_set_intfdata(iface, i2400mu);
i2400m->bus_tx_block_size = I2400MU_BLK_SIZE;
/*
* Room required in the Tx queue for USB message to accommodate
* a smallest payload while allocating header space is 16 bytes.
* Adding this room for the new tx message increases the
* possibilities of including any payload with size <= 16 bytes.
*/
i2400m->bus_tx_room_min = I2400MU_BLK_SIZE;
i2400m->bus_pl_size_max = I2400MU_PL_SIZE_MAX;
i2400m->bus_setup = NULL;
i2400m->bus_dev_start = i2400mu_bus_dev_start;
i2400m->bus_dev_stop = i2400mu_bus_dev_stop;
i2400m->bus_release = NULL;
i2400m->bus_tx_kick = i2400mu_bus_tx_kick;
i2400m->bus_reset = i2400mu_bus_reset;
i2400m->bus_bm_retries = I2400M_USB_BOOT_RETRIES;
i2400m->bus_bm_cmd_send = i2400mu_bus_bm_cmd_send;
i2400m->bus_bm_wait_for_ack = i2400mu_bus_bm_wait_for_ack;
i2400m->bus_bm_mac_addr_impaired = 0;
switch (id->idProduct) {
case USB_DEVICE_ID_I6050:
case USB_DEVICE_ID_I6050_2:
case USB_DEVICE_ID_I6250:
i2400mu->i6050 = 1;
break;
default:
break;
}
if (i2400mu->i6050) {
i2400m->bus_fw_names = i2400mu_bus_fw_names_6050;
i2400mu->endpoint_cfg.bulk_out = 0;
i2400mu->endpoint_cfg.notification = 3;
i2400mu->endpoint_cfg.reset_cold = 2;
i2400mu->endpoint_cfg.bulk_in = 1;
} else {
i2400m->bus_fw_names = i2400mu_bus_fw_names_5x50;
i2400mu->endpoint_cfg.bulk_out = 0;
i2400mu->endpoint_cfg.notification = 1;
i2400mu->endpoint_cfg.reset_cold = 2;
i2400mu->endpoint_cfg.bulk_in = 3;
}
#ifdef CONFIG_PM
iface->needs_remote_wakeup = 1; /* autosuspend (15s delay) */
device_init_wakeup(dev, 1);
pm_runtime_set_autosuspend_delay(&usb_dev->dev, 15000);
usb_enable_autosuspend(usb_dev);
#endif
result = i2400m_setup(i2400m, I2400M_BRI_MAC_REINIT);
if (result < 0) {
dev_err(dev, "cannot setup device: %d\n", result);
goto error_setup;
}
result = i2400mu_debugfs_add(i2400mu);
if (result < 0) {
dev_err(dev, "Can't register i2400mu's debugfs: %d\n", result);
goto error_debugfs_add;
}
return 0;
error_debugfs_add:
i2400m_release(i2400m);
error_setup:
usb_set_intfdata(iface, NULL);
usb_put_dev(i2400mu->usb_dev);
free_netdev(net_dev);
error_alloc_netdev:
return result;
}
int __devinit arizona_dev_init(struct arizona *arizona)
{
struct device *dev = arizona->dev;
const char *type_name;
unsigned int reg, val;
int ret, i;
dev_set_drvdata(arizona->dev, arizona);
mutex_init(&arizona->clk_lock);
if (dev_get_platdata(arizona->dev))
memcpy(&arizona->pdata, dev_get_platdata(arizona->dev),
sizeof(arizona->pdata));
regcache_cache_only(arizona->regmap, true);
switch (arizona->type) {
case WM5102:
case WM5110:
for (i = 0; i < ARRAY_SIZE(wm5102_core_supplies); i++)
arizona->core_supplies[i].supply
= wm5102_core_supplies[i];
arizona->num_core_supplies = ARRAY_SIZE(wm5102_core_supplies);
break;
default:
dev_err(arizona->dev, "Unknown device type %d\n",
arizona->type);
return -EINVAL;
}
ret = mfd_add_devices(arizona->dev, -1, early_devs,
ARRAY_SIZE(early_devs), NULL, 0);
if (ret != 0) {
dev_err(dev, "Failed to add early children: %d\n", ret);
return ret;
}
ret = regulator_bulk_get(dev, arizona->num_core_supplies,
arizona->core_supplies);
if (ret != 0) {
dev_err(dev, "Failed to request core supplies: %d\n",
ret);
goto err_early;
}
ret = regulator_bulk_enable(arizona->num_core_supplies,
arizona->core_supplies);
if (ret != 0) {
dev_err(dev, "Failed to enable core supplies: %d\n",
ret);
goto err_bulk_get;
}
if (arizona->pdata.reset) {
/* Start out with /RESET low to put the chip into reset */
ret = gpio_request_one(arizona->pdata.reset,
GPIOF_DIR_OUT | GPIOF_INIT_LOW,
"arizona /RESET");
if (ret != 0) {
dev_err(dev, "Failed to request /RESET: %d\n", ret);
goto err_enable;
}
gpio_set_value_cansleep(arizona->pdata.reset, 1);
}
if (arizona->pdata.ldoena) {
ret = gpio_request_one(arizona->pdata.ldoena,
GPIOF_DIR_OUT | GPIOF_INIT_HIGH,
"arizona LDOENA");
if (ret != 0) {
dev_err(dev, "Failed to request LDOENA: %d\n", ret);
goto err_reset;
}
}
regcache_cache_only(arizona->regmap, false);
ret = regmap_read(arizona->regmap, ARIZONA_SOFTWARE_RESET, ®);
if (ret != 0) {
dev_err(dev, "Failed to read ID register: %d\n", ret);
goto err_ldoena;
}
ret = regmap_read(arizona->regmap, ARIZONA_DEVICE_REVISION,
&arizona->rev);
if (ret != 0) {
dev_err(dev, "Failed to read revision register: %d\n", ret);
goto err_ldoena;
}
arizona->rev &= ARIZONA_DEVICE_REVISION_MASK;
switch (reg) {
#ifdef CONFIG_MFD_WM5102
case 0x5102:
type_name = "WM5102";
if (arizona->type != WM5102) {
dev_err(arizona->dev, "WM5102 registered as %d\n",
arizona->type);
arizona->type = WM5102;
}
ret = wm5102_patch(arizona);
break;
#endif
#ifdef CONFIG_MFD_WM5110
case 0x5110:
type_name = "WM5110";
if (arizona->type != WM5110) {
dev_err(arizona->dev, "WM5110 registered as %d\n",
arizona->type);
arizona->type = WM5110;
}
ret = wm5110_patch(arizona);
break;
#endif
default:
dev_err(arizona->dev, "Unknown device ID %x\n", reg);
goto err_ldoena;
}
dev_info(dev, "%s revision %c\n", type_name, arizona->rev + 'A');
if (ret != 0)
dev_err(arizona->dev, "Failed to apply patch: %d\n", ret);
/* If we have a /RESET GPIO we'll already be reset */
if (!arizona->pdata.reset) {
ret = regmap_write(arizona->regmap, ARIZONA_SOFTWARE_RESET, 0);
if (ret != 0) {
dev_err(dev, "Failed to reset device: %d\n", ret);
goto err_ldoena;
}
}
ret = arizona_wait_for_boot(arizona);
if (ret != 0) {
dev_err(arizona->dev, "Device failed initial boot: %d\n", ret);
goto err_reset;
}
for (i = 0; i < ARRAY_SIZE(arizona->pdata.gpio_defaults); i++) {
if (!arizona->pdata.gpio_defaults[i])
continue;
regmap_write(arizona->regmap, ARIZONA_GPIO1_CTRL + i,
arizona->pdata.gpio_defaults[i]);
}
pm_runtime_set_autosuspend_delay(arizona->dev, 100);
pm_runtime_use_autosuspend(arizona->dev);
pm_runtime_enable(arizona->dev);
/* Chip default */
if (!arizona->pdata.clk32k_src)
arizona->pdata.clk32k_src = ARIZONA_32KZ_MCLK2;
switch (arizona->pdata.clk32k_src) {
case ARIZONA_32KZ_MCLK1:
case ARIZONA_32KZ_MCLK2:
regmap_update_bits(arizona->regmap, ARIZONA_CLOCK_32K_1,
ARIZONA_CLK_32K_SRC_MASK,
arizona->pdata.clk32k_src - 1);
break;
case ARIZONA_32KZ_NONE:
regmap_update_bits(arizona->regmap, ARIZONA_CLOCK_32K_1,
ARIZONA_CLK_32K_SRC_MASK, 2);
break;
default:
dev_err(arizona->dev, "Invalid 32kHz clock source: %d\n",
arizona->pdata.clk32k_src);
ret = -EINVAL;
goto err_ldoena;
}
for (i = 0; i < ARIZONA_MAX_INPUT; i++) {
/* Default for both is 0 so noop with defaults */
val = arizona->pdata.dmic_ref[i]
<< ARIZONA_IN1_DMIC_SUP_SHIFT;
val |= arizona->pdata.inmode[i] << ARIZONA_IN1_MODE_SHIFT;
regmap_update_bits(arizona->regmap,
ARIZONA_IN1L_CONTROL + (i * 8),
ARIZONA_IN1_DMIC_SUP_MASK |
ARIZONA_IN1_MODE_MASK, val);
}
for (i = 0; i < ARIZONA_MAX_OUTPUT; i++) {
/* Default is 0 so noop with defaults */
if (arizona->pdata.out_mono[i])
val = ARIZONA_OUT1_MONO;
else
val = 0;
regmap_update_bits(arizona->regmap,
ARIZONA_OUTPUT_PATH_CONFIG_1L + (i * 8),
ARIZONA_OUT1_MONO, val);
}
for (i = 0; i < ARIZONA_MAX_PDM_SPK; i++) {
if (arizona->pdata.spk_mute[i])
regmap_update_bits(arizona->regmap,
ARIZONA_PDM_SPK1_CTRL_1 + (i * 2),
ARIZONA_SPK1_MUTE_ENDIAN_MASK |
ARIZONA_SPK1_MUTE_SEQ1_MASK,
arizona->pdata.spk_mute[i]);
if (arizona->pdata.spk_fmt[i])
regmap_update_bits(arizona->regmap,
ARIZONA_PDM_SPK1_CTRL_2 + (i * 2),
ARIZONA_SPK1_FMT_MASK,
arizona->pdata.spk_fmt[i]);
}
/* Set up for interrupts */
ret = arizona_irq_init(arizona);
if (ret != 0)
goto err_ldoena;
arizona_request_irq(arizona, ARIZONA_IRQ_CLKGEN_ERR, "CLKGEN error",
arizona_clkgen_err, arizona);
arizona_request_irq(arizona, ARIZONA_IRQ_OVERCLOCKED, "Overclocked",
arizona_overclocked, arizona);
arizona_request_irq(arizona, ARIZONA_IRQ_UNDERCLOCKED, "Underclocked",
arizona_underclocked, arizona);
switch (arizona->type) {
case WM5102:
ret = mfd_add_devices(arizona->dev, -1, wm5102_devs,
ARRAY_SIZE(wm5102_devs), NULL, 0);
break;
case WM5110:
ret = mfd_add_devices(arizona->dev, -1, wm5110_devs,
ARRAY_SIZE(wm5110_devs), NULL, 0);
break;
}
if (ret != 0) {
dev_err(arizona->dev, "Failed to add subdevices: %d\n", ret);
goto err_irq;
}
return 0;
err_irq:
arizona_irq_exit(arizona);
err_ldoena:
if (arizona->pdata.ldoena) {
gpio_set_value_cansleep(arizona->pdata.ldoena, 0);
gpio_free(arizona->pdata.ldoena);
}
err_reset:
if (arizona->pdata.reset) {
gpio_set_value_cansleep(arizona->pdata.reset, 1);
gpio_free(arizona->pdata.reset);
}
err_enable:
regulator_bulk_disable(ARRAY_SIZE(arizona->core_supplies),
arizona->core_supplies);
err_bulk_get:
regulator_bulk_free(ARRAY_SIZE(arizona->core_supplies),
arizona->core_supplies);
err_early:
mfd_remove_devices(dev);
return ret;
}
