static int pmic8058_kpd_init(struct pmic8058_kp *kp)
{
int bits, rc, cycles;
u8 scan_val = 0, ctrl_val = 0;
static u8 row_bits[] = {
0, 1, 2, 3, 4, 4, 5, 5, 6, 6, 6, 7, 7, 7,
};
/* Find column bits */
if (kp->pdata->num_cols < KEYP_CTRL_SCAN_COLS_MIN)
bits = 0;
else
bits = kp->pdata->num_cols - KEYP_CTRL_SCAN_COLS_MIN;
ctrl_val = (bits & KEYP_CTRL_SCAN_COLS_BITS) <<
KEYP_CTRL_SCAN_COLS_SHIFT;
/* Find row bits */
if (kp->pdata->num_rows < KEYP_CTRL_SCAN_ROWS_MIN)
bits = 0;
else if (kp->pdata->num_rows > MATRIX_MAX_ROWS)
bits = KEYP_CTRL_SCAN_ROWS_BITS;
else
bits = row_bits[kp->pdata->num_rows - KEYP_CTRL_SCAN_ROWS_MIN];
/* Use max rows to fix last row problem if actual rows are less */
if (kp->flags & KEYF_FIX_LAST_ROW)
bits = KEYP_CTRL_SCAN_ROWS_BITS;
ctrl_val |= (bits << KEYP_CTRL_SCAN_ROWS_SHIFT);
rc = pmic8058_kp_write_u8(kp, ctrl_val, KEYP_CTRL);
if (rev == PMIC8058_REV_A0)
bits = fls(kp->pdata->debounce_ms) - 1;
else
bits = kp->pdata->debounce_ms / 5;
scan_val |= (bits << KEYP_SCAN_DBOUNCE_SHIFT);
bits = fls(kp->pdata->scan_delay_ms) - 1;
scan_val |= (bits << KEYP_SCAN_PAUSE_SHIFT);
/* Row hold time is a multiple of 32KHz cycles. */
cycles = kp->pdata->row_hold_us * KEYP_CLOCK_FREQ / USEC_PER_SEC;
bits = 3; /* Max : b11 */
while (bits) {
if (cycles >= (2 << bits))
break;
bits--;
}
scan_val |= (bits << KEYP_SCAN_ROW_HOLD_SHIFT);
rc = pmic8058_kp_write_u8(kp, scan_val, KEYP_SCAN);
return rc;
}
/*
* NOTE: Last row multi-interrupt issue
*
* In PMIC Rev A0, if any key in the last row of the keypad matrix
* is pressed and held, the H/W keeps on generating interrupts.
* Software work-arounds it by programming the keypad controller next level
* up rows (for 8x12 matrix it is 15 rows) so the keypad controller
* thinks of more-rows than the actual ones, so the actual last-row
* in the matrix won't generate multiple interrupts.
*/
static int pmic8058_kpd_init(struct pmic8058_kp *kp)
{
int bits, rc, cycles;
u8 scan_val = 0, ctrl_val = 0;
static u8 row_bits[] = {
0, 1, 2, 3, 4, 4, 5, 5, 6, 6, 6, 7, 7, 7,
};
/* Find column bits */
if (kp->pdata->num_cols < KEYP_CTRL_SCAN_COLS_MIN)
bits = 0;
else
bits = kp->pdata->num_cols - KEYP_CTRL_SCAN_COLS_MIN;
ctrl_val = (bits & KEYP_CTRL_SCAN_COLS_BITS) <<
KEYP_CTRL_SCAN_COLS_SHIFT;
/* Find row bits */
if (kp->pdata->num_rows < KEYP_CTRL_SCAN_ROWS_MIN)
bits = 0;
else if (kp->pdata->num_rows > PM8058_MAX_ROWS)
bits = KEYP_CTRL_SCAN_ROWS_BITS;
else
bits = row_bits[kp->pdata->num_rows - KEYP_CTRL_SCAN_ROWS_MIN];
/* Use max rows to fix last row problem if actual rows are less */
if (kp->flags & KEYF_FIX_LAST_ROW &&
(kp->pdata->num_rows != PM8058_MAX_ROWS))
bits = row_bits[kp->pdata->num_rows - KEYP_CTRL_SCAN_ROWS_MIN
+ 1];
ctrl_val |= (bits << KEYP_CTRL_SCAN_ROWS_SHIFT);
rc = pmic8058_kp_write_u8(kp, ctrl_val, KEYP_CTRL);
if (pm8058_rev(kp->pm_chip) == PM_8058_REV_1p0)
bits = fls(kp->pdata->debounce_ms[0]) - 1;
else
bits = (kp->pdata->debounce_ms[1] / 5) - 1;
scan_val |= (bits << KEYP_SCAN_DBOUNCE_SHIFT);
bits = fls(kp->pdata->scan_delay_ms) - 1;
scan_val |= (bits << KEYP_SCAN_PAUSE_SHIFT);
/* Row hold time is a multiple of 32KHz cycles. */
cycles = (kp->pdata->row_hold_ns * KEYP_CLOCK_FREQ) / NSEC_PER_SEC;
scan_val |= (cycles << KEYP_SCAN_ROW_HOLD_SHIFT);
rc = pmic8058_kp_write_u8(kp, scan_val, KEYP_SCAN);
return rc;
}
static int pmic8058_kpd_init(struct pmic8058_kp *kp)
{
int bits, rc, cycles;
u8 scan_val = 0, ctrl_val = 0;
static u8 row_bits[] = {
0, 1, 2, 3, 4, 4, 5, 5, 6, 6, 6, 7, 7, 7,
};
if (kp->pdata->num_cols < KEYP_CTRL_SCAN_COLS_MIN)
bits = 0;
else
bits = kp->pdata->num_cols - KEYP_CTRL_SCAN_COLS_MIN;
ctrl_val = (bits & KEYP_CTRL_SCAN_COLS_BITS) <<
KEYP_CTRL_SCAN_COLS_SHIFT;
if (kp->pdata->num_rows < KEYP_CTRL_SCAN_ROWS_MIN)
bits = 0;
else if (kp->pdata->num_rows > MATRIX_MAX_ROWS)
bits = KEYP_CTRL_SCAN_ROWS_BITS;
else
bits = row_bits[kp->pdata->num_rows - KEYP_CTRL_SCAN_ROWS_MIN];
if (kp->flags & KEYF_FIX_LAST_ROW &&
(kp->pdata->num_rows != MATRIX_MAX_ROWS))
bits = row_bits[kp->pdata->num_rows - KEYP_CTRL_SCAN_ROWS_MIN
+ 1];
ctrl_val |= (bits << KEYP_CTRL_SCAN_ROWS_SHIFT);
rc = pmic8058_kp_write_u8(kp, ctrl_val, KEYP_CTRL);
if (pm8058_rev(kp->pm_chip) == PM_8058_REV_1p0)
bits = fls(kp->pdata->debounce_ms[0]) - 1;
else
bits = (kp->pdata->debounce_ms[1] / 5) - 1;
scan_val |= (bits << KEYP_SCAN_DBOUNCE_SHIFT);
bits = fls(kp->pdata->scan_delay_ms) - 1;
scan_val |= (bits << KEYP_SCAN_PAUSE_SHIFT);
cycles = (kp->pdata->row_hold_ns * KEYP_CLOCK_FREQ) / NSEC_PER_SEC;
scan_val |= (cycles << KEYP_SCAN_ROW_HOLD_SHIFT);
rc = pmic8058_kp_write_u8(kp, scan_val, KEYP_SCAN);
return rc;
}
static void pmic8058_kp_disable(struct pmic8058_kp *kp)
{
if (kp->disable_depth++ == 0) {
disable_irq(kp->key_sense_irq);
disable_irq(kp->key_stuck_irq);
kp->ctrl_reg &= ~KEYP_CTRL_KEYP_EN;
pmic8058_kp_write_u8(kp, kp->ctrl_reg, KEYP_CTRL);
}
}
static void pmic8058_kp_enable(struct pmic8058_kp *kp)
{
if (!pmic8058_kp_disabled(kp))
return;
if (--kp->disable_depth == 0) {
kp->ctrl_reg |= KEYP_CTRL_KEYP_EN;
pmic8058_kp_write_u8(kp, kp->ctrl_reg, KEYP_CTRL);
enable_irq(kp->key_sense_irq);
enable_irq(kp->key_stuck_irq);
}
}
/*
* Synchronous read protocol for RevB0 onwards:
*
* 1. Write '1' to ReadState bit in KEYP_SCAN register
* 2. Wait 2*32KHz clocks, so that HW can successfully enter read mode
* synchronously
* 3. Read rows in old array first if events are more than one
* 4. Read rows in recent array
* 5. Wait 4*32KHz clocks
* 6. Write '0' to ReadState bit of KEYP_SCAN register so that hw can
* synchronously exit read mode.
*/
static int pmic8058_chk_sync_read(struct pmic8058_kp *kp)
{
int rc;
u8 scan_val;
rc = pmic8058_kp_read_u8(kp, &scan_val, KEYP_SCAN);
scan_val |= 0x1;
rc = pmic8058_kp_write_u8(kp, scan_val, KEYP_SCAN);
/* 2 * 32KHz clocks */
udelay((2 * USEC_PER_SEC / KEYP_CLOCK_FREQ) + 1);
return rc;
}
static int pmic8058_kp_read_matrix(struct pmic8058_kp *kp, u16 *new_state,
u16 *old_state)
{
int rc, read_rows;
u8 scan_val;
static u8 rows[] = {
5, 6, 7, 8, 10, 10, 12, 12, 15, 15, 15, 18, 18, 18
};
if (kp->flags & KEYF_FIX_LAST_ROW &&
(kp->pdata->num_rows != PM8058_MAX_ROWS))
read_rows = rows[kp->pdata->num_rows - KEYP_CTRL_SCAN_ROWS_MIN
+ 1];
#if 1 //Qualcomm patch for keypad matrix 2*5
else if (kp->pdata->num_rows < PM8058_MIN_ROWS)
read_rows = PM8058_MIN_ROWS;
#endif
else
read_rows = kp->pdata->num_rows;
if (pm8058_rev(kp->pm_chip) > PM_8058_REV_1p0)
pmic8058_chk_sync_read(kp);
if (old_state)
rc = pmic8058_kp_read_data(kp, old_state, KEYP_OLD_DATA,
read_rows);
rc = pmic8058_kp_read_data(kp, new_state, KEYP_RECENT_DATA,
read_rows);
if (pm8058_rev(kp->pm_chip) > PM_8058_REV_1p0) {
/* 4 * 32KHz clocks */
udelay((4 * USEC_PER_SEC / KEYP_CLOCK_FREQ) + 1);
rc = pmic8058_kp_read(kp, &scan_val, KEYP_SCAN, 1);
scan_val &= 0xFE;
rc = pmic8058_kp_write_u8(kp, scan_val, KEYP_SCAN);
}
return rc;
}
static int pm8058_kp_config_drv(int gpio_start, int num_gpios)
{
int rc;
struct pm8058_gpio kypd_drv = {
.direction = PM_GPIO_DIR_OUT,
.output_buffer = PM_GPIO_OUT_BUF_OPEN_DRAIN,
.output_value = 0,
.pull = PM_GPIO_PULL_NO,
.vin_sel = 2,
.out_strength = PM_GPIO_STRENGTH_LOW,
.function = PM_GPIO_FUNC_1,
.inv_int_pol = 1,
};
if (gpio_start < 0 || num_gpios < 0 || num_gpios > PM8058_GPIOS)
return -EINVAL;
while (num_gpios--) {
rc = pm8058_gpio_config(gpio_start++, &kypd_drv);
if (rc) {
pr_err("%s: FAIL pm8058_gpio_config(): rc=%d.\n",
__func__, rc);
return rc;
}
}
return 0;
}
static int pm8058_kp_config_sns(int gpio_start, int num_gpios)
{
int rc;
struct pm8058_gpio kypd_sns = {
.direction = PM_GPIO_DIR_IN,
.pull = PM_GPIO_PULL_UP_31P5,
.vin_sel = 2,
.out_strength = PM_GPIO_STRENGTH_NO,
.function = PM_GPIO_FUNC_NORMAL,
.inv_int_pol = 1,
};
if (gpio_start < 0 || num_gpios < 0 || num_gpios > PM8058_GPIOS)
return -EINVAL;
while (num_gpios--) {
rc = pm8058_gpio_config(gpio_start++, &kypd_sns);
if (rc) {
pr_err("%s: FAIL pm8058_gpio_config(): rc=%d.\n",
__func__, rc);
return rc;
}
}
return 0;
}
/*
* keypad controller should be initialized in the following sequence
* only, otherwise it might get into FSM stuck state.
*
* - Initialize keypad control parameters, like no. of rows, columns,
* timing values etc.,
* - configure rows and column gpios pull up/down.
* - set irq edge type.
* - enable the keypad controller.
*/
static int __devinit pmic8058_kp_probe(struct platform_device *pdev)
{
struct pmic8058_keypad_data *pdata = pdev->dev.platform_data;
const struct matrix_keymap_data *keymap_data;
struct pmic8058_kp *kp;
int rc;
unsigned short *keycodes;
u8 ctrl_val;
struct pm8058_chip *pm_chip;
pm_chip = platform_get_drvdata(pdev);
if (pm_chip == NULL) {
dev_err(&pdev->dev, "no parent data passed in\n");
return -EFAULT;
}
if (!pdata || !pdata->num_cols || !pdata->num_rows ||
pdata->num_cols > PM8058_MAX_COLS ||
pdata->num_rows > PM8058_MAX_ROWS ||
pdata->num_cols < PM8058_MIN_COLS
#if 0
|| pdata->num_rows < PM8058_MIN_ROWS
#endif
) {
dev_err(&pdev->dev, "invalid platform data\n");
return -EINVAL;
}
if (pdata->rows_gpio_start < 0 || pdata->cols_gpio_start < 0) {
dev_err(&pdev->dev, "invalid gpio_start platform data\n");
return -EINVAL;
}
if (!pdata->scan_delay_ms || pdata->scan_delay_ms > MAX_SCAN_DELAY
|| pdata->scan_delay_ms < MIN_SCAN_DELAY ||
!is_power_of_2(pdata->scan_delay_ms)) {
dev_err(&pdev->dev, "invalid keypad scan time supplied\n");
return -EINVAL;
}
if (!pdata->row_hold_ns || pdata->row_hold_ns > MAX_ROW_HOLD_DELAY
|| pdata->row_hold_ns < MIN_ROW_HOLD_DELAY ||
((pdata->row_hold_ns % MIN_ROW_HOLD_DELAY) != 0)) {
dev_err(&pdev->dev, "invalid keypad row hold time supplied\n");
return -EINVAL;
}
if (pm8058_rev(pm_chip) == PM_8058_REV_1p0) {
if (!pdata->debounce_ms
|| !is_power_of_2(pdata->debounce_ms[0])
|| pdata->debounce_ms[0] > MAX_DEBOUNCE_A0_TIME
|| pdata->debounce_ms[0] < MIN_DEBOUNCE_A0_TIME) {
dev_err(&pdev->dev, "invalid debounce time supplied\n");
return -EINVAL;
}
} else {
if (!pdata->debounce_ms
|| ((pdata->debounce_ms[1] % 5) != 0)
|| pdata->debounce_ms[1] > MAX_DEBOUNCE_B0_TIME
|| pdata->debounce_ms[1] < MIN_DEBOUNCE_B0_TIME) {
dev_err(&pdev->dev, "invalid debounce time supplied\n");
return -EINVAL;
}
}
keymap_data = pdata->keymap_data;
if (!keymap_data) {
dev_err(&pdev->dev, "no keymap data supplied\n");
return -EINVAL;
}
kp = kzalloc(sizeof(*kp), GFP_KERNEL);
if (!kp)
return -ENOMEM;
keycodes = kzalloc(PM8058_MATRIX_MAX_SIZE * sizeof(*keycodes),
GFP_KERNEL);
if (!keycodes) {
rc = -ENOMEM;
goto err_alloc_mem;
}
platform_set_drvdata(pdev, kp);
mutex_init(&kp->mutex);
kp->pdata = pdata;
kp->dev = &pdev->dev;
kp->keycodes = keycodes;
kp->pm_chip = pm_chip;
if (pm8058_rev(pm_chip) == PM_8058_REV_1p0)
kp->flags |= KEYF_FIX_LAST_ROW;
kp->input = input_allocate_device();
if (!kp->input) {
dev_err(&pdev->dev, "unable to allocate input device\n");
rc = -ENOMEM;
goto err_alloc_device;
}
/* Enable runtime PM ops, start in ACTIVE mode */
rc = pm_runtime_set_active(&pdev->dev);
if (rc < 0)
dev_dbg(&pdev->dev, "unable to set runtime pm state\n");
pm_runtime_enable(&pdev->dev);
kp->key_sense_irq = platform_get_irq(pdev, 0);
if (kp->key_sense_irq < 0) {
dev_err(&pdev->dev, "unable to get keypad sense irq\n");
rc = -ENXIO;
goto err_get_irq;
}
kp->key_stuck_irq = platform_get_irq(pdev, 1);
if (kp->key_stuck_irq < 0) {
dev_err(&pdev->dev, "unable to get keypad stuck irq\n");
rc = -ENXIO;
goto err_get_irq;
}
if (pdata->input_name)
kp->input->name = pdata->input_name;
else
kp->input->name = "PMIC8058 keypad";
if (pdata->input_phys_device)
kp->input->phys = pdata->input_phys_device;
else
kp->input->phys = "pmic8058_keypad/input0";
kp->input->dev.parent = &pdev->dev;
kp->input->id.bustype = BUS_HOST;
kp->input->id.version = 0x0001;
kp->input->id.product = 0x0001;
kp->input->id.vendor = 0x0001;
kp->input->evbit[0] = BIT_MASK(EV_KEY);
if (pdata->rep)
__set_bit(EV_REP, kp->input->evbit);
kp->input->keycode = keycodes;
kp->input->keycodemax = PM8058_MATRIX_MAX_SIZE;
kp->input->keycodesize = sizeof(*keycodes);
matrix_keypad_build_keymap(keymap_data, PM8058_ROW_SHIFT,
kp->input->keycode, kp->input->keybit);
input_set_capability(kp->input, EV_MSC, MSC_SCAN);
input_set_drvdata(kp->input, kp);
rc = input_register_device(kp->input);
if (rc < 0) {
dev_err(&pdev->dev, "unable to register keypad input device\n");
goto err_get_irq;
}
/* initialize keypad state */
memset(kp->keystate, 0xff, sizeof(kp->keystate));
memset(kp->stuckstate, 0xff, sizeof(kp->stuckstate));
rc = pmic8058_kpd_init(kp);
if (rc < 0) {
dev_err(&pdev->dev, "unable to initialize keypad controller\n");
goto err_kpd_init;
}
rc = pm8058_kp_config_sns(pdata->cols_gpio_start,
pdata->num_cols);
if (rc < 0) {
dev_err(&pdev->dev, "unable to configure keypad sense lines\n");
goto err_gpio_config;
}
rc = pm8058_kp_config_drv(pdata->rows_gpio_start,
pdata->num_rows);
if (rc < 0) {
dev_err(&pdev->dev, "unable to configure keypad drive lines\n");
goto err_gpio_config;
}
rc = request_threaded_irq(kp->key_sense_irq, NULL, pmic8058_kp_irq,
IRQF_TRIGGER_RISING, "pmic-keypad", kp);
if (rc < 0) {
dev_err(&pdev->dev, "failed to request keypad sense irq\n");
goto err_req_sense_irq;
}
rc = request_threaded_irq(kp->key_stuck_irq, NULL,
pmic8058_kp_stuck_irq, IRQF_TRIGGER_RISING,
"pmic-keypad-stuck", kp);
if (rc < 0) {
dev_err(&pdev->dev, "failed to request keypad stuck irq\n");
goto err_req_stuck_irq;
}
rc = pmic8058_kp_read_u8(kp, &ctrl_val, KEYP_CTRL);
ctrl_val |= KEYP_CTRL_KEYP_EN;
rc = pmic8058_kp_write_u8(kp, ctrl_val, KEYP_CTRL);
kp->ctrl_reg = ctrl_val;
__dump_kp_regs(kp, "probe");
rc = device_create_file(&pdev->dev, &dev_attr_key_pressed);
if (rc < 0)
goto err_create_file;
rc = device_create_file(&pdev->dev, &dev_attr_disable_kp);
if (rc < 0)
goto err_create_file;
device_init_wakeup(&pdev->dev, pdata->wakeup);
return 0;
err_create_file:
free_irq(kp->key_stuck_irq, kp);
err_req_stuck_irq:
free_irq(kp->key_sense_irq, kp);
err_req_sense_irq:
err_gpio_config:
err_kpd_init:
input_unregister_device(kp->input);
kp->input = NULL;
err_get_irq:
pm_runtime_set_suspended(&pdev->dev);
pm_runtime_disable(&pdev->dev);
input_free_device(kp->input);
err_alloc_device:
kfree(keycodes);
err_alloc_mem:
kfree(kp);
return rc;
}
static int __devexit pmic8058_kp_remove(struct platform_device *pdev)
{
struct pmic8058_kp *kp = platform_get_drvdata(pdev);
// sysfs_remove_group(&pdev->dev.kobj, &pmic8058_keys_attr_group);
pm_runtime_set_suspended(&pdev->dev);
pm_runtime_disable(&pdev->dev);
device_remove_file(&pdev->dev, &dev_attr_key_pressed);
device_remove_file(&pdev->dev, &dev_attr_disable_kp);
device_init_wakeup(&pdev->dev, 0);
free_irq(kp->key_stuck_irq, kp);
free_irq(kp->key_sense_irq, kp);
input_unregister_device(kp->input);
platform_set_drvdata(pdev, NULL);
kfree(kp->input->keycode);
kfree(kp);
return 0;
}
#ifdef CONFIG_PM
static int pmic8058_kp_suspend(struct device *dev)
{
struct pmic8058_kp *kp = dev_get_drvdata(dev);
if (device_may_wakeup(dev) && !pmic8058_kp_disabled(kp)) {
enable_irq_wake(kp->key_sense_irq);
} else {
mutex_lock(&kp->mutex);
pmic8058_kp_disable(kp);
mutex_unlock(&kp->mutex);
}
return 0;
}
static int pmic8058_kp_resume(struct device *dev)
{
struct pmic8058_kp *kp = dev_get_drvdata(dev);
if (device_may_wakeup(dev) && !pmic8058_kp_disabled(kp)) {
disable_irq_wake(kp->key_sense_irq);
} else {
mutex_lock(&kp->mutex);
pmic8058_kp_enable(kp);
mutex_unlock(&kp->mutex);
}
return 0;
}
static struct dev_pm_ops pm8058_kp_pm_ops = {
.suspend = pmic8058_kp_suspend,
.resume = pmic8058_kp_resume,
};
#endif
static struct platform_driver pmic8058_kp_driver = {
.probe = pmic8058_kp_probe,
.remove = __devexit_p(pmic8058_kp_remove),
.driver = {
.name = "pm8058-keypad",
.owner = THIS_MODULE,
#ifdef CONFIG_PM
.pm = &pm8058_kp_pm_ops,
#endif
},
};
static int __init pmic8058_kp_init(void)
{
return platform_driver_register(&pmic8058_kp_driver);
}
module_init(pmic8058_kp_init);
static void __exit pmic8058_kp_exit(void)
{
platform_driver_unregister(&pmic8058_kp_driver);
}
static int gpio_keypad_config(struct pmic8058_kp *kp)
{
struct pm8058_gpio gpiokpd_configuration = {
.direction = PM_GPIO_DIR_IN,
.pull = PM_GPIO_PULL_UP_31P5,
.vin_sel = 2,
.out_strength = PM_GPIO_STRENGTH_NO,
.function = PM_GPIO_FUNC_NORMAL,
.inv_int_pol = 0,
};
int rc = 0;
//-------
rc = pm8058_gpio_config(SILENT_KEY_UP_GPIO, &gpiokpd_configuration); //Div2D5-OwenHung-Silent Key GPIO shift+
if (rc < 0) {
printk(KERN_ERR "[KEYPAD] Config GPIO %d fail", SILENT_KEY_UP_GPIO);
return rc;
}
else
{
rc = gpio_request(PM8058_GPIO_PM_TO_SYS(SILENT_KEY_UP_GPIO), "silent_key_up"); //Div2D5-OwenHung-Silent Key GPIO shift+
if (rc < 0)
{
printk(KERN_ERR "[KEYPAD] GPIO request - %d fail", SILENT_KEY_UP_GPIO);
return rc;
}
else
{
rc = gpio_direction_input(PM8058_GPIO_PM_TO_SYS(SILENT_KEY_UP_GPIO) ); //Div2D5-OwenHung-Silent Key GPIO shift+
if (rc < 0)
{
printk(KERN_ERR "[KEYPAD] GPIO direction - %d fail", SILENT_KEY_UP_GPIO);
return rc;
}
}
}
printk(KERN_INFO "[KEYPAD] Config GPIO %d OK", SILENT_KEY_UP_GPIO);
return rc;
}
#endif
//Div2D5-OwenHung-keypad driver porting-
/*
* NOTE: Last row multi-interrupt issue
*
* In PMIC Rev A0, if any key in the last row of the keypad matrix
* is pressed and held, the H/W keeps on generating interrupts.
* Software work-arounds it by programming the keypad controller next level
* up rows (for 8x12 matrix it is 15 rows) so the keypad controller
* thinks of more-rows than the actual ones, so the actual last-row
* in the matrix won't generate multiple interrupts.
*/
static int pmic8058_kpd_init(struct pmic8058_kp *kp)
{
int bits, rc, cycles;
u8 scan_val = 0, ctrl_val = 0;
static u8 row_bits[] = {
0, 1, 2, 3, 4, 4, 5, 5, 6, 6, 6, 7, 7, 7,
};
/* Find column bits */
if (kp->pdata->num_cols < KEYP_CTRL_SCAN_COLS_MIN)
bits = 0;
else
bits = kp->pdata->num_cols - KEYP_CTRL_SCAN_COLS_MIN;
ctrl_val = (bits & KEYP_CTRL_SCAN_COLS_BITS) <<
KEYP_CTRL_SCAN_COLS_SHIFT;
/* Find row bits */
if (kp->pdata->num_rows < KEYP_CTRL_SCAN_ROWS_MIN)
bits = 0;
else if (kp->pdata->num_rows > PM8058_MAX_ROWS)
bits = KEYP_CTRL_SCAN_ROWS_BITS;
else
bits = row_bits[kp->pdata->num_rows - KEYP_CTRL_SCAN_ROWS_MIN];
/* Use max rows to fix last row problem if actual rows are less */
if (kp->flags & KEYF_FIX_LAST_ROW &&
(kp->pdata->num_rows != PM8058_MAX_ROWS))
bits = row_bits[kp->pdata->num_rows - KEYP_CTRL_SCAN_ROWS_MIN
+ 1];
ctrl_val |= (bits << KEYP_CTRL_SCAN_ROWS_SHIFT);
rc = pmic8058_kp_write_u8(kp, ctrl_val, KEYP_CTRL);
if (pm8058_rev(kp->pm_chip) == PM_8058_REV_1p0)
bits = fls(kp->pdata->debounce_ms[0]) - 1;
else
bits = (kp->pdata->debounce_ms[1] / 5) - 1;
scan_val |= (bits << KEYP_SCAN_DBOUNCE_SHIFT);
bits = fls(kp->pdata->scan_delay_ms) - 1;
scan_val |= (bits << KEYP_SCAN_PAUSE_SHIFT);
/* Row hold time is a multiple of 32KHz cycles. */
cycles = (kp->pdata->row_hold_ns * KEYP_CLOCK_FREQ) / NSEC_PER_SEC;
scan_val |= (cycles << KEYP_SCAN_ROW_HOLD_SHIFT);
rc = pmic8058_kp_write_u8(kp, scan_val, KEYP_SCAN);
return rc;
}
static int pm8058_kp_config_drv(int gpio_start, int num_gpios)
{
int rc;
struct pm8058_gpio kypd_drv = {
.direction = PM_GPIO_DIR_OUT,
.output_buffer = PM_GPIO_OUT_BUF_OPEN_DRAIN,
.output_value = 0,
.pull = PM_GPIO_PULL_NO,
.vin_sel = 2,
.out_strength = PM_GPIO_STRENGTH_LOW,
.function = PM_GPIO_FUNC_1,
.inv_int_pol = 1,
};
if (gpio_start < 0 || num_gpios < 0 || num_gpios > PM8058_GPIOS)
return -EINVAL;
while (num_gpios--) {
rc = pm8058_gpio_config(gpio_start++, &kypd_drv);
if (rc) {
pr_err("%s: FAIL pm8058_gpio_config(): rc=%d.\n",
__func__, rc);
return rc;
}
}
return 0;
}
static int pm8058_kp_config_sns(int gpio_start, int num_gpios)
{
int rc;
struct pm8058_gpio kypd_sns = {
.direction = PM_GPIO_DIR_IN,
.pull = PM_GPIO_PULL_UP_31P5,
.vin_sel = 2,
.out_strength = PM_GPIO_STRENGTH_NO,
.function = PM_GPIO_FUNC_NORMAL,
.inv_int_pol = 1,
};
if (gpio_start < 0 || num_gpios < 0 || num_gpios > PM8058_GPIOS)
return -EINVAL;
while (num_gpios--) {
rc = pm8058_gpio_config(gpio_start++, &kypd_sns);
if (rc) {
pr_err("%s: FAIL pm8058_gpio_config(): rc=%d.\n",
__func__, rc);
return rc;
}
}
return 0;
}
static int __devinit pmic8058_kp_probe(struct platform_device *pdev)
{
struct pmic8058_keypad_data *pdata = pdev->dev.platform_data;
struct pmic8058_kp *kp;
int rc, i;
unsigned short *keycodes;
u8 ctrl_val;
struct pm8058_chip *pm_chip;
pm_chip = platform_get_drvdata(pdev);
if (pm_chip == NULL) {
dev_err(&pdev->dev, "no parent data passed in\n");
return -EFAULT;
}
if (!pdata || !pdata->num_cols || !pdata->num_rows ||
pdata->num_cols > MATRIX_MAX_COLS ||
pdata->num_rows > MATRIX_MAX_ROWS ||
pdata->num_cols < MATRIX_MIN_COLS ||
pdata->num_rows < MATRIX_MIN_ROWS ||
!pdata->keymap) {
dev_err(&pdev->dev, "invalid platform data\n");
return -EINVAL;
}
if (pdata->rows_gpio_start < 0 || pdata->cols_gpio_start < 0) {
dev_err(&pdev->dev, "invalid gpio_start platform data\n");
return -EINVAL;
}
if (!pdata->scan_delay_ms || pdata->scan_delay_ms > MAX_SCAN_DELAY
|| pdata->scan_delay_ms < MIN_SCAN_DELAY ||
!is_power_of_2(pdata->scan_delay_ms)) {
dev_err(&pdev->dev, "invalid keypad scan time supplied\n");
return -EINVAL;
}
if (!pdata->row_hold_ns || pdata->row_hold_ns > MAX_ROW_HOLD_DELAY
|| pdata->row_hold_ns < MIN_ROW_HOLD_DELAY ||
((pdata->row_hold_ns % MIN_ROW_HOLD_DELAY) != 0)) {
dev_err(&pdev->dev, "invalid keypad row hold time supplied\n");
return -EINVAL;
}
if (pm8058_rev(pm_chip) == PM_8058_REV_1p0) {
if (!pdata->debounce_ms
|| !is_power_of_2(pdata->debounce_ms[0])
|| pdata->debounce_ms[0] > MAX_DEBOUNCE_A0_TIME
|| pdata->debounce_ms[0] < MIN_DEBOUNCE_A0_TIME) {
dev_err(&pdev->dev, "invalid debounce time supplied\n");
return -EINVAL;
}
} else {
if (!pdata->debounce_ms
|| ((pdata->debounce_ms[1] % 5) != 0)
|| pdata->debounce_ms[1] > MAX_DEBOUNCE_B0_TIME
|| pdata->debounce_ms[1] < MIN_DEBOUNCE_B0_TIME) {
dev_err(&pdev->dev, "invalid debounce time supplied\n");
return -EINVAL;
}
}
kp = kzalloc(sizeof(*kp), GFP_KERNEL);
if (!kp)
return -ENOMEM;
keycodes = kzalloc(MATRIX_MAX_SIZE * sizeof(keycodes), GFP_KERNEL);
if (!keycodes) {
rc = -ENOMEM;
goto err_alloc_mem;
}
platform_set_drvdata(pdev, kp);
kp->pdata = pdata;
kp->dev = &pdev->dev;
kp->keycodes = keycodes;
kp->pm_chip = pm_chip;
if (pm8058_rev(pm_chip) == PM_8058_REV_1p0)
kp->flags |= KEYF_FIX_LAST_ROW;
kp->input = input_allocate_device();
if (!kp->input) {
dev_err(&pdev->dev, "unable to allocate input device\n");
rc = -ENOMEM;
goto err_alloc_device;
}
kp->key_sense_irq = platform_get_irq(pdev, 0);
if (kp->key_sense_irq < 0) {
dev_err(&pdev->dev, "unable to get keypad sense irq\n");
rc = -ENXIO;
goto err_get_irq;
}
kp->key_stuck_irq = platform_get_irq(pdev, 1);
if (kp->key_stuck_irq < 0) {
dev_err(&pdev->dev, "unable to get keypad stuck irq\n");
rc = -ENXIO;
goto err_get_irq;
}
if (pdata->input_name)
kp->input->name = pdata->input_name;
else
kp->input->name = "PMIC8058 keypad";
if (pdata->input_phys_device)
kp->input->phys = pdata->input_phys_device;
else
kp->input->phys = "pmic8058_keypad/input0";
kp->input->dev.parent = &pdev->dev;
kp->input->id.bustype = BUS_HOST;
kp->input->id.version = 0x0001;
kp->input->id.product = 0x0001;
kp->input->id.vendor = 0x0001;
kp->input->evbit[0] = BIT_MASK(EV_KEY);
if (pdata->rep)
__set_bit(EV_REP, kp->input->evbit);
kp->input->keycode = keycodes;
kp->input->keycodemax = MATRIX_MAX_SIZE;
kp->input->keycodesize = sizeof(*keycodes);
for (i = 0; i < pdata->keymap_size; i++) {
unsigned int row = KEY_ROW(pdata->keymap[i]);
unsigned int col = KEY_COL(pdata->keymap[i]);
unsigned short keycode = KEY_VAL(pdata->keymap[i]);
keycodes[(row << 3) + col] = keycode;
__set_bit(keycode, kp->input->keybit);
}
__clear_bit(KEY_RESERVED, kp->input->keybit);
input_set_capability(kp->input, EV_MSC, MSC_SCAN);
input_set_drvdata(kp->input, kp);
rc = input_register_device(kp->input);
if (rc < 0) {
dev_err(&pdev->dev, "unable to register keypad input device\n");
goto err_get_irq;
}
memset(kp->keystate, 0xff, sizeof(kp->keystate));
memset(kp->stuckstate, 0xff, sizeof(kp->stuckstate));
rc = pmic8058_kpd_init(kp);
if (rc < 0) {
dev_err(&pdev->dev, "unable to initialize keypad controller\n");
goto err_kpd_init;
}
rc = pm8058_kp_config_sns(pdata->cols_gpio_start,
pdata->num_cols);
if (rc < 0) {
dev_err(&pdev->dev, "unable to configure keypad sense lines\n");
goto err_gpio_config;
}
rc = pm8058_kp_config_drv(pdata->rows_gpio_start,
pdata->num_rows);
if (rc < 0) {
dev_err(&pdev->dev, "unable to configure keypad drive lines\n");
goto err_gpio_config;
}
rc = request_irq(kp->key_sense_irq, pmic8058_kp_irq,
IRQF_TRIGGER_RISING, "pmic-keypad", kp);
if (rc < 0) {
dev_err(&pdev->dev, "failed to request keypad sense irq\n");
goto err_req_sense_irq;
}
rc = request_irq(kp->key_stuck_irq, pmic8058_kp_stuck_irq,
IRQF_TRIGGER_RISING, "pmic-keypad-stuck", kp);
if (rc < 0) {
dev_err(&pdev->dev, "failed to request keypad stuck irq\n");
goto err_req_stuck_irq;
}
rc = pmic8058_kp_read(kp, &ctrl_val, KEYP_CTRL, 1);
ctrl_val |= KEYP_CTRL_KEYP_EN;
rc = pmic8058_kp_write_u8(kp, ctrl_val, KEYP_CTRL);
__dump_kp_regs(kp, "probe");
device_init_wakeup(&pdev->dev, pdata->wakeup);
return 0;
err_req_stuck_irq:
free_irq(kp->key_sense_irq, NULL);
err_req_sense_irq:
err_gpio_config:
err_kpd_init:
input_unregister_device(kp->input);
kp->input = NULL;
err_get_irq:
input_free_device(kp->input);
err_alloc_device:
kfree(keycodes);
err_alloc_mem:
kfree(kp);
return rc;
}
static int __devexit pmic8058_kp_remove(struct platform_device *pdev)
{
struct pmic8058_kp *kp = platform_get_drvdata(pdev);
device_init_wakeup(&pdev->dev, 0);
free_irq(kp->key_stuck_irq, NULL);
free_irq(kp->key_sense_irq, NULL);
input_unregister_device(kp->input);
platform_set_drvdata(pdev, NULL);
kfree(kp->input->keycode);
kfree(kp);
return 0;
}
static struct platform_driver pmic8058_kp_driver = {
.probe = pmic8058_kp_probe,
.remove = __devexit_p(pmic8058_kp_remove),
.driver = {
.name = "pm8058-keypad",
.owner = THIS_MODULE,
#ifdef CONFIG_PM
.pm = &pm8058_kp_pm_ops,
#endif
},
};
static int __init pmic8058_kp_init(void)
{
return platform_driver_register(&pmic8058_kp_driver);
}
module_init(pmic8058_kp_init);
static void __exit pmic8058_kp_exit(void)
{
platform_driver_unregister(&pmic8058_kp_driver);
}
static int pmic8058_kp_read_matrix(struct pmic8058_kp *kp, u16 *new_state,
u16 *old_state)
{
/* SHARP Add. use 1 Row Line. other key data clear. start */
#ifdef CONFIG_KEYBOARD_SCKEY
#if (defined(CONFIG_QWERTY_KEYPAD) || defined(CONFIG_QWERTY2_KEYPAD) || defined(CONFIG_QWERTY3_KEYPAD))
volatile int j,i,k = 0;
volatile int bits_changed1;
volatile int bits_changed2;
volatile int bits_changed_old1;
volatile int bits_changed_old2;
volatile int board_state;
volatile int result;
#else
int j;
#endif /* (defined(CONFIG_QWERTY_KEYPAD) || defined(CONFIG_QWERTY2_KEYPAD) || defined(CONFIG_QWERTY3_KEYPAD)) */
#endif /* #ifdef CONFIG_KEYBOARD_SCKEY */
/* SHARP Add. use 1 Row Line. end */
int rc, read_rows;
u8 scan_val;
static u8 rows[] = {
5, 6, 7, 8, 10, 10, 12, 12, 15, 15, 15, 18, 18, 18
};
if (kp->flags & KEYF_FIX_LAST_ROW &&
(kp->pdata->num_rows != PM8058_MAX_ROWS))
read_rows = rows[kp->pdata->num_rows - KEYP_CTRL_SCAN_ROWS_MIN
+ 1];
else
read_rows = kp->pdata->num_rows;
if (pm8058_rev(kp->pm_chip) > PM_8058_REV_1p0)
pmic8058_chk_sync_read(kp);
if (old_state)
rc = pmic8058_kp_read_data(kp, old_state, KEYP_OLD_DATA,
read_rows);
rc = pmic8058_kp_read_data(kp, new_state, KEYP_RECENT_DATA,
read_rows);
if (pm8058_rev(kp->pm_chip) > PM_8058_REV_1p0) {
/* 4 * 32KHz clocks */
udelay((4 * USEC_PER_SEC / KEYP_CLOCK_FREQ) + 1);
rc = pmic8058_kp_read(kp, &scan_val, KEYP_SCAN, 1);
scan_val &= 0xFE;
rc = pmic8058_kp_write_u8(kp, scan_val, KEYP_SCAN);
}
/* SHARP Add. use 1 Row Line. other key data clear. start */
#ifdef CONFIG_KEYBOARD_SCKEY
#if (defined(CONFIG_TENKEY_KEYPAD) || defined(CONFIG_TENKEY2_KEYPAD) || defined(CONFIG_TENKEY3_KEYPAD))
/* depend on target system */
for( j = 6; j <MATRIX_MAX_ROWS; j++)
{
if (old_state)
{
old_state[j] = 0xff;
}
new_state[j] = 0xff;
}
#elif (defined(CONFIG_QWERTY_KEYPAD) || defined(CONFIG_QWERTY2_KEYPAD) || defined(CONFIG_QWERTY3_KEYPAD))
result = sh_boot_get_hw_revision();
if( (result & 0x0002) == 0 ) {
board_state = 0;
} else {
board_state =1;
}
SHDBG_KEY_HAL(printk(KERN_DEBUG "[shkey]result:0x%x,board_state:0x%x\n", result ,board_state);)
/* depend on target system */
for( j = 10; j <MATRIX_MAX_ROWS; j++)
/*
* keypad controller should be initialized in the following sequence
* only, otherwise it might get into FSM stuck state.
*
* - Initialize keypad control parameters, like no. of rows, columns,
* timing values etc.,
* - configure rows and column gpios pull up/down.
* - set irq edge type.
* - enable the keypad controller.
*/
static int __devinit pmic8058_kp_probe(struct platform_device *pdev)
{
struct pmic8058_keypad_data *pdata = pdev->dev.platform_data;
struct pmic8058_kp *kp;
int rc, i;
unsigned short *keycodes;
u8 ctrl_val;
if (!pdata || !pdata->num_cols || !pdata->num_rows ||
pdata->num_cols > MATRIX_MAX_COLS ||
pdata->num_rows > MATRIX_MAX_ROWS ||
!pdata->keymap) {
dev_err(&pdev->dev, "invalid platform data\n");
return -EINVAL;
}
if (pdata->rows_gpio_start < 0 || pdata->cols_gpio_start < 0) {
dev_err(&pdev->dev, "invalid gpio_start platform data\n");
return -EINVAL;
}
if (!pdata->scan_delay_ms || pdata->scan_delay_ms > MAX_SCAN_DELAY
|| pdata->scan_delay_ms < MIN_SCAN_DELAY ||
!is_power_of_2(pdata->scan_delay_ms)) {
dev_err(&pdev->dev, "invalid keypad scan time supplied\n");
return -EINVAL;
}
rc = pm8058_read(PM8058_REV, &rev, 1);
pr_info("PMIC4 is at %X revision\n", rev);
if (rev == PMIC8058_REV_A0) {
if (!pdata->debounce_ms || !is_power_of_2(pdata->debounce_ms)
|| pdata->debounce_ms > MAX_DEBOUNCE_A0_TIME
|| pdata->debounce_ms < MIN_DEBOUNCE_A0_TIME) {
dev_err(&pdev->dev, "invalid debounce time supplied\n");
return -EINVAL;
}
} else {
if (!pdata->debounce_ms || ((pdata->debounce_ms % 5) != 0)
|| pdata->debounce_ms > MAX_DEBOUNCE_B0_TIME
|| pdata->debounce_ms < MIN_DEBOUNCE_B0_TIME) {
dev_err(&pdev->dev, "invalid debounce time supplied\n");
return -EINVAL;
}
}
kp = kzalloc(sizeof(*kp), GFP_KERNEL);
if (!kp)
return -ENOMEM;
keycodes = kzalloc(MATRIX_MAX_SIZE * sizeof(keycodes), GFP_KERNEL);
if (!keycodes) {
rc = -ENOMEM;
goto err_alloc_mem;
}
platform_set_drvdata(pdev, kp);
kp->pdata = pdata;
kp->dev = &pdev->dev;
kp->keycodes = keycodes;
/* REVISIT: actual revision with the fix */
if (rev <= PMIC8058_REV_B0)
kp->flags |= KEYF_FIX_LAST_ROW;
kp->input = input_allocate_device();
if (!kp->input) {
dev_err(&pdev->dev, "unable to allocate input device\n");
rc = -ENOMEM;
goto err_alloc_device;
}
kp->key_sense_irq = platform_get_irq(pdev, 0);
if (kp->key_sense_irq < 0) {
dev_err(&pdev->dev, "unable to get keypad sense irq\n");
rc = -ENXIO;
goto err_get_irq;
}
kp->key_stuck_irq = platform_get_irq(pdev, 1);
if (kp->key_stuck_irq < 0) {
dev_err(&pdev->dev, "unable to get keypad stuck irq\n");
rc = -ENXIO;
goto err_get_irq;
}
if (pdata->input_name)
kp->input->name = pdata->input_name;
else
kp->input->name = "PMIC8058 keypad";
if (pdata->input_phys_device)
kp->input->phys = pdata->input_phys_device;
else
kp->input->phys = "pmic8058_keypad/input0";
kp->input->dev.parent = &pdev->dev;
kp->input->id.bustype = BUS_HOST;
kp->input->id.version = 0x0001;
kp->input->id.product = 0x0001;
kp->input->id.vendor = 0x0001;
kp->input->evbit[0] = BIT_MASK(EV_KEY);
if (pdata->rep)
__set_bit(EV_REP, kp->input->evbit);
kp->input->keycode = keycodes;
kp->input->keycodemax = MATRIX_MAX_SIZE;
kp->input->keycodesize = sizeof(*keycodes);
/* build keycodes for faster scanning */
for (i = 0; i < pdata->keymap_size; i++) {
unsigned int row = KEY_ROW(pdata->keymap[i]);
unsigned int col = KEY_COL(pdata->keymap[i]);
unsigned short keycode = KEY_VAL(pdata->keymap[i]);
keycodes[(row << 3) + col] = keycode;
__set_bit(keycode, kp->input->keybit);
}
__clear_bit(KEY_RESERVED, kp->input->keybit);
input_set_capability(kp->input, EV_MSC, MSC_SCAN);
input_set_drvdata(kp->input, kp);
rc = input_register_device(kp->input);
if (rc < 0) {
dev_err(&pdev->dev, "unable to register keypad input device\n");
goto err_get_irq;
}
/* initialize keypad state */
memset(kp->keystate, 0xff, sizeof(kp->keystate));
rc = pmic8058_kpd_init(kp);
if (rc < 0) {
dev_err(&pdev->dev, "unable to initialize keypad controller\n");
goto err_kpd_init;
}
rc = pm8058_gpio_config_kypd_sns(pdata->cols_gpio_start,
pdata->num_cols);
if (rc < 0) {
dev_err(&pdev->dev, "unable to configure keypad sense lines\n");
goto err_gpio_config;
}
rc = pm8058_gpio_config_kypd_drv(pdata->rows_gpio_start,
pdata->num_rows);
if (rc < 0) {
dev_err(&pdev->dev, "unable to configure keypad drive lines\n");
goto err_gpio_config;
}
rc = request_irq(kp->key_sense_irq, pmic8058_kp_irq,
IRQF_TRIGGER_RISING, "pmic-keypad", kp);
if (rc < 0) {
dev_err(&pdev->dev, "failed to request keypad sense irq\n");
goto err_req_sense_irq;
}
rc = request_irq(kp->key_stuck_irq, pmic8058_kp_stuck_irq,
IRQF_TRIGGER_RISING, "pmic-keypad-stuck", kp);
if (rc < 0) {
dev_err(&pdev->dev, "failed to request keypad stuck irq\n");
goto err_req_stuck_irq;
}
rc = pmic8058_kp_read(kp, &ctrl_val, KEYP_CTRL, 1);
ctrl_val |= KEYP_CTRL_KEYP_EN;
rc = pmic8058_kp_write_u8(kp, ctrl_val, KEYP_CTRL);
__dump_kp_regs(kp, "probe");
device_init_wakeup(&pdev->dev, pdata->wakeup);
return 0;
err_req_stuck_irq:
free_irq(kp->key_sense_irq, NULL);
err_req_sense_irq:
err_gpio_config:
err_kpd_init:
input_unregister_device(kp->input);
kp->input = NULL;
err_get_irq:
input_free_device(kp->input);
err_alloc_device:
kfree(keycodes);
err_alloc_mem:
kfree(kp);
return rc;
}