static int power_init(void)
{
unsigned int val;
int ret = -1;
struct pmic *p;
if (!i2c_probe(CONFIG_SYS_DIALOG_PMIC_I2C_ADDR)) {
pmic_dialog_init();
p = get_pmic();
/* Set VDDA to 1.25V */
val = DA9052_BUCKCORE_BCOREEN | DA_BUCKCORE_VBCORE_1_250V;
ret = pmic_reg_write(p, DA9053_BUCKCORE_REG, val);
ret |= pmic_reg_read(p, DA9053_SUPPLY_REG, &val);
val |= DA9052_SUPPLY_VBCOREGO;
ret |= pmic_reg_write(p, DA9053_SUPPLY_REG, val);
/* Set Vcc peripheral to 1.30V */
ret |= pmic_reg_write(p, DA9053_BUCKPRO_REG, 0x62);
ret |= pmic_reg_write(p, DA9053_SUPPLY_REG, 0x62);
}
if (!i2c_probe(CONFIG_SYS_FSL_PMIC_I2C_ADDR)) {
pmic_init();
p = get_pmic();
/* Set VDDGP to 1.25V for 1GHz on SW1 */
pmic_reg_read(p, REG_SW_0, &val);
val = (val & ~SWx_VOLT_MASK_MC34708) | SWx_1_250V_MC34708;
ret = pmic_reg_write(p, REG_SW_0, val);
/* Set VCC as 1.30V on SW2 */
pmic_reg_read(p, REG_SW_1, &val);
val = (val & ~SWx_VOLT_MASK_MC34708) | SWx_1_300V_MC34708;
ret |= pmic_reg_write(p, REG_SW_1, val);
/* Set global reset timer to 4s */
pmic_reg_read(p, REG_POWER_CTL2, &val);
val = (val & ~TIMER_MASK_MC34708) | TIMER_4S_MC34708;
ret |= pmic_reg_write(p, REG_POWER_CTL2, val);
/* Set VUSBSEL and VUSBEN for USB PHY supply*/
pmic_reg_read(p, REG_MODE_0, &val);
val |= (VUSBSEL_MC34708 | VUSBEN_MC34708);
ret |= pmic_reg_write(p, REG_MODE_0, val);
/* Set SWBST to 5V in auto mode */
val = SWBST_AUTO;
ret |= pmic_reg_write(p, SWBST_CTRL, val);
}
return ret;
}
static int power_init(void)
{
unsigned int val;
int ret;
struct pmic *p;
if (!i2c_probe(CONFIG_SYS_DIALOG_PMIC_I2C_ADDR)) {
ret = pmic_dialog_init(I2C_PMIC);
if (ret)
return ret;
p = pmic_get("DIALOG_PMIC");
if (!p)
return -ENODEV;
setenv("fdt_file", "imx53-qsb.dtb");
/* Set VDDA to 1.25V */
val = DA9052_BUCKCORE_BCOREEN | DA_BUCKCORE_VBCORE_1_250V;
ret = pmic_reg_write(p, DA9053_BUCKCORE_REG, val);
if (ret) {
printf("Writing to BUCKCORE_REG failed: %d\n", ret);
return ret;
}
pmic_reg_read(p, DA9053_SUPPLY_REG, &val);
val |= DA9052_SUPPLY_VBCOREGO;
ret = pmic_reg_write(p, DA9053_SUPPLY_REG, val);
if (ret) {
printf("Writing to SUPPLY_REG failed: %d\n", ret);
return ret;
}
/* Set Vcc peripheral to 1.30V */
ret = pmic_reg_write(p, DA9053_BUCKPRO_REG, 0x62);
if (ret) {
printf("Writing to BUCKPRO_REG failed: %d\n", ret);
return ret;
}
ret = pmic_reg_write(p, DA9053_SUPPLY_REG, 0x62);
if (ret) {
printf("Writing to SUPPLY_REG failed: %d\n", ret);
return ret;
}
return ret;
}
if (!i2c_probe(CONFIG_SYS_FSL_PMIC_I2C_ADDR)) {
ret = pmic_init(I2C_0);
if (ret)
return ret;
p = pmic_get("FSL_PMIC");
if (!p)
return -ENODEV;
setenv("fdt_file", "imx53-qsrb.dtb");
/* Set VDDGP to 1.25V for 1GHz on SW1 */
pmic_reg_read(p, REG_SW_0, &val);
val = (val & ~SWx_VOLT_MASK_MC34708) | SWx_1_250V_MC34708;
ret = pmic_reg_write(p, REG_SW_0, val);
if (ret) {
printf("Writing to REG_SW_0 failed: %d\n", ret);
return ret;
}
/* Set VCC as 1.30V on SW2 */
pmic_reg_read(p, REG_SW_1, &val);
val = (val & ~SWx_VOLT_MASK_MC34708) | SWx_1_300V_MC34708;
ret = pmic_reg_write(p, REG_SW_1, val);
if (ret) {
printf("Writing to REG_SW_1 failed: %d\n", ret);
return ret;
}
/* Set global reset timer to 4s */
pmic_reg_read(p, REG_POWER_CTL2, &val);
val = (val & ~TIMER_MASK_MC34708) | TIMER_4S_MC34708;
ret = pmic_reg_write(p, REG_POWER_CTL2, val);
if (ret) {
printf("Writing to REG_POWER_CTL2 failed: %d\n", ret);
return ret;
}
/* Set VUSBSEL and VUSBEN for USB PHY supply*/
pmic_reg_read(p, REG_MODE_0, &val);
val |= (VUSBSEL_MC34708 | VUSBEN_MC34708);
ret = pmic_reg_write(p, REG_MODE_0, val);
if (ret) {
printf("Writing to REG_MODE_0 failed: %d\n", ret);
return ret;
}
/* Set SWBST to 5V in auto mode */
val = SWBST_AUTO;
ret = pmic_reg_write(p, SWBST_CTRL, val);
if (ret) {
printf("Writing to SWBST_CTRL failed: %d\n", ret);
return ret;
}
return ret;
}
return -1;
}
