void setJointsCB( const staubliTX60::SetJointsGoalConstPtr &goal ) {
//staubli.ResetMotion();
ros::Rate rate(10);
bool success = true;
ROS_INFO("Set Joints Action Cmd received \n");
if( staubli.MoveJoints(goal->j,
goal->params.movementType,
goal->params.jointVelocity,
goal->params.jointAcc,
goal->params.jointDec,
goal->params.endEffectorMaxTranslationVel,
goal->params.endEffectorMaxRotationalVel,
goal->params.distBlendPrev,
goal->params.distBlendNext
) )
{
ROS_INFO("Cmd received, moving to desired joint angles.");
while(true){
if (as_.isPreemptRequested() || !ros::ok()) {
ROS_INFO("%s: Preempted", action_name_.c_str());
// set the action state to preempted
staubli.ResetMotion();
as_.setPreempted();
success = false;
break;
}
if( polling(goal->j) ) break;
rate.sleep();
}
if(success) as_.setSucceeded(result_);
}else {
as_.setAborted();
ROS_ERROR("Cannot move to specified joints' configuration.");
}
}
void comhandle()
{
serial_println("");
serial_println("Welcome to the MPX OS.");
serial_println("Feel free to begin entering commands.");
serial_println("");
while(1) {
char *command = polling();
if (!strcmpigncase(command, "Shutdown")) {
if (shutdownConfirmed()) {
serial_println("System shutting down...");
break;
} else {
serial_println("Shutdown canceled.");
}
} else if (!strcmpigncase(command, "Version")) {
version();
} else if (!strcmpigncase(command, "Help")) {
help();
} else if (!strcmpigncase(command, "Setdate")) {
setdate();
} else if (!strcmpigncase(command, "Getdate")) {
getdate();
} else if (!strcmpigncase(command, "Settime")) {
settime();
} else if (!strcmpigncase(command, "Gettime")) {
gettime();
}
}
}
void CPollingThread::doPoll()
{
//qDebug() << state;
switch (state) {
case CSerialPortPrivate::STATE_REQUESTING:
requesting();
break;
case CSerialPortPrivate::STATE_WRITING:
writing();
break;
case CSerialPortPrivate::STATE_POLLING:
polling();
break;
case CSerialPortPrivate::STATE_READING:
reading();
break;
case CSerialPortPrivate::STATE_NOTIFY_DATA:
notifying();
break;
case CSerialPortPrivate::STATE_NOTIFY_TIMEOUT:
notifyingTimeout();
break;
default:
break;
}
usleep(100);
}
void help()
{
while(1) {
serial_println("Which command would you like to know more about?");
serial_println("Enter CommandList for a list of commands.");
serial_println("Enter QuitHelp to exit.");
char *command = polling();
if (!strcmpigncase(command, "CommandList")) {
serial_println("Here's a list of available commands:");
serial_println("Version");
serial_println("Help");
serial_println("Setdate");
serial_println("Getdate");
serial_println("Settime");
serial_println("Gettime");
serial_println("Shutdown");
serial_println("");
}
else if (!strcmpigncase(command, "QuitHelp")) {
return;
}
else if (!strcmpigncase(command, "Version")) {
serial_println("Version shows the current version of the operating system.");
return;
}
else if (!strcmpigncase(command, "Help")) {
serial_println("Help gets further help for a prompted command");
return;
}
else if (!strcmpigncase(command, "Setdate")) {
serial_println("Setdate allows the user to set the date of the operating system.");
return;
}
else if (!strcmpigncase(command, "Getdate")) {
serial_println("Getdate returns the current date of the operating system.");
return;
}
else if (!strcmpigncase(command, "Settime")) {
serial_println("Settime allows the user to set the time of the operating system.");
return;
}
else if (!strcmpigncase(command, "Gettime")) {
serial_println("Gettime returns the current date of the operating system.");
return;
}
else if (!strcmpigncase(command, "Shutdown")) {
serial_println("Shutdown turns off the operating system.");
return;
}
else {
serial_print("Unrecognized command: ");
serial_println(command);
}
}
}
void setPriority()
{
serial_print("Please enter the name of the process to alter: ");
char* name = polling();
PCB *target = findPCB(name);
if(target == NULL)
{
serial_print("Process not found: \"");
serial_print(name);
serial_println("\" is not a valid process name");
}
else
{
serial_print("What is the new priority? ");
char* newPriority = polling();
int priority = atoi(newPriority);
if(-1 < priority && 10 > priority)
{
target->priority = priority;
int readyIndex = indexByNameReady(name);
int blockedIndex = indexByNameBlocked(name);
if (readyIndex >= 0) {
removePCBAtIndexReady(readyIndex);
} else {
removePCBAtIndexBlocked(blockedIndex);
}
insertPCB(target);
serial_print("The process \"");
serial_print(name);
serial_println("\" has successfully updated its priority");
}
else
{
serial_println("Cannot set priority: invalid range");
}
sys_free_mem(newPriority);
}
sys_free_mem(name);
sys_free_mem(target);
serial_println("");
}
void comhandle()
{
serial_println("");
serial_println("Welcome to the MPX OS.");
serial_println("Feel free to begin entering commands.");
serial_println("");
while(1) {
char *command = polling();
if (!strcmpigncase(command, "shutdown")) {
if (shutdownConfirmed()) {
serial_println("System shutting down...");
clearAllQueues();
break;
} else {
serial_println("Shutdown canceled.");
}
} else if (!strcmpigncase(command, "version")) {
version();
} else if (!strcmpigncase(command, "help")) {
help();
} else if (!strcmpigncase(command, "setdate")) {
setdate();
} else if (!strcmpigncase(command, "getdate")) {
getdate();
} else if (!strcmpigncase(command, "settime")) {
settime();
} else if (!strcmpigncase(command, "gettime")) {
gettime();
} else if (!strcmpigncase(command, "suspend")) {
suspendPCB();
} else if (!strcmpigncase(command, "resume")) {
resumePCB();
} else if (!strcmpigncase(command, "setpriority")) {
setPriority();
} else if (!strcmpigncase(command, "showPCB")) {
showPCB();
} else if (!strcmpigncase(command, "showReady")) {
showReady();
} else if (!strcmpigncase(command, "showBlocked")) {
showBlocked();
} else if (!strcmpigncase(command, "showAll")) {
showAll();
} else if (!strcmpigncase(command, "yield")) {
asm volatile ("int $60");
serial_println("");
} else if (!strcmpigncase(command, "loadr3")) {
loadR3();
} else if (strcmp(command, '\0')) {
serial_println("Command not recognized. Type help to view commands.");
serial_println("");
}
sys_free_mem(command);
}
void settime()
{
serial_println("What is the current hour?");
char *response = polling();
unsigned char portnum = 0x04; //hours port
writetoRTC(portnum, response);
serial_println("What is the current minute?");
response = polling();
portnum = 0x02; //minutes port
writetoRTC(portnum, response);
serial_println("What is the current second?");
response = polling();
portnum = 0x00; //seconds port
writetoRTC(portnum, response);
serial_print("Time successfully changed to -> ");
gettime();
sys_free_mem(response);
}
void setdate()
{
serial_println("What day of the week is it?");
char *response = polling();
char *bcdweekday = fromweekday(response);
unsigned char portnum = 0x06; //weekday port
writetoRTC(portnum, bcdweekday);
serial_println("What month is it?");
response = polling();
char *bcdmonth = frommonth(response);
portnum = 0x08; //month port
writetoRTC(portnum, bcdmonth);
serial_println("What day of the month is it?");
response = polling();
portnum = 0x07; //month day port
writetoRTC(portnum, response);
serial_println("What year is it?");
response = polling();
char *bcdyear = sys_alloc_mem(2);
if (strlen(response) != 4 || atoi(response) < 2000) {
bcdyear[0] = '\0';
} else {
bcdyear[0] = response[2];
bcdyear[1] = response[3];
}
portnum = 0x09;
writetoRTC(portnum, bcdyear);
serial_print("Time successfully changed to -> ");
getdate();
sys_free_mem(response);
sys_free_mem(bcdweekday);
sys_free_mem(bcdmonth);
sys_free_mem(bcdyear);
}
void showPCB() {
serial_print("Please enter the name of the desired PCB to view: ");
char* pcbName = polling();
PCB* process = findPCB(pcbName);
if (process == NULL) {
serial_print(pcbName);
serial_println(" is not a valid PCB");
return;
}
PrintPCB(process);
sys_free_mem(pcbName);
sys_free_mem(process);
}
int shutdownConfirmed()
{
while(1) {
serial_println("Are you sure you would like to shutdown? (Y/N)");
char *response = polling();
if (!strcmpigncase(response, "y") || !strcmpigncase(response, "yes")) {
sys_free_mem(response);
return 1;
} else if (!strcmpigncase(response, "n") || !strcmpigncase(response, "no")) {
sys_free_mem(response);
return 0;
} else {
sys_free_mem(response);
serial_println("Entered value not recognized.");
}
}
}
void resumePCB()
{
serial_print("Please enter the name of the process to resume: ");
char* name = polling();
PCB *target = findPCB(name);
if(target == NULL)
{
serial_print("Process not found: \"");
serial_print(name);
serial_println("\" is not a valid process name");
}
else
{
target->suspendedState = 0;
serial_print("The process \"");
serial_print(name);
serial_println("\" has resumed successfully");
}
sys_free_mem(name);
sys_free_mem(target);
serial_println("");
}
void deletePCB()
{
serial_print("Please enter the name of the process to delete: ");
char* name = polling();
PCB* target = findPCB(name);
if(target == NULL)
{
if(strlen(name) == 0) {
serial_print("Process not found: \"");
serial_print(name);
serial_println("\" does not appear to exist");
}
}
else
{
int readyIndex = indexByNameReady(name);
int blockedIndex = indexByNameBlocked(name);
PCB* removedPCB = NULL;
if (readyIndex >- 0) {
removedPCB = removePCBAtIndexReady(readyIndex);
} else {
removedPCB = removePCBAtIndexBlocked(blockedIndex);
}
FreePCB(removedPCB);
// if (!FreePCB(removedPCB)) {
serial_print("The process \"");
serial_print(name);
serial_print("\" has been deleted successfully");
// } else {
// serial_print("An error occurred while attempting to remove the process \"");
// serial_print(name);
// serial_println("\"");
//}
}
serial_println("");
}
bool edaMpiWrapperControl::search( edaSolutionList &list )
{
// variables
int i, j, p, l;
int command;
int nidles;
int idles[nprocs_];
MPI_Status mpiStat;
// initialize status variables
runningJobCount = 0;
for( i=1; i<nprocs_; i++ ){
workers_[i].stat_ = EDA_MPI_PROCESSOR_IDLE;
workers_[i].taskID_ = -1;
}
// start the search
while (!allDone()) {
vector<int> readyTasks = findReadyTask();
vector<int>::iterator readyIter;
// find idle processors
nidles = 0;
for( i=1; i<nprocs_; i++ )
if ( workers_[i].stat_ == EDA_MPI_PROCESSOR_IDLE )
idles[nidles++] = i;
// Create the search objects for all ready nodes
p = 0;
for (readyIter = readyTasks.begin(); readyIter != readyTasks.end(); readyIter++)
{
// task ID on DAG
int taskID = *readyIter;
// send computing request to first idle processor
if ( p < nidles ){
// send command
command = EDA_MPI_START_SEARCH;
MPI_Send( &command, 1, MPI_INT, idles[p], 0, MPI_COMM_WORLD );
// pack search and its parameters
edaBuffer sa_buf;
edaSearch *sa = taskDAG[taskID];
sa->ProcID = idles[p];
sa->doSerialize( sa_buf, true );
// send buffer for search method
l = sa_buf.getActualSize();
MPI_Send( &l, 1, MPI_INT, idles[p],
0, MPI_COMM_WORLD );
MPI_Send( sa_buf.getBuffer(), sa_buf.getActualSize(),
MPI_CHAR, idles[p], 0, MPI_COMM_WORLD );
// pack solution
edaBuffer sol_buf;
edaSolutionList *mysol = NULL;
mysol = chooseSolution( taskID, list );
mysol->doSerialize( sol_buf, true );
// send buffer for solution to worker
l = sol_buf.getActualSize();
MPI_Send( &l, 1, MPI_INT, idles[p],
0, MPI_COMM_WORLD );
MPI_Send( sol_buf.getBuffer(), l, MPI_CHAR, idles[p],
0, MPI_COMM_WORLD );
// set status of worker to computing
workers_[idles[p]].stat_ = EDA_MPI_PROCESSOR_COMPUTING;
workers_[idles[p]].taskID_ = taskID;
taskStatus[taskID] = STATUS_RUNNING;
runningJobCount ++;
p ++;
} else {
// no processor idle, then break the loop
break;
}
}
int pollingResult = POLLING_NOCHANGE;
int nodeFinished;
// Polling for job finished
while (true)
{
if ( runningJobCount == 0 ){
// Nothing to poll
pollingResult = POLLING_NOCHANGE;
break;
}
// poll for any return
pollingResult = polling( nodeFinished );
if ( pollingResult == POLLING_FINISHED ){
break;
} else if ( pollingResult == POLLING_ERROR ){
break;
} else { // NOCHANGE
}
}
// Job finished
if ( pollingResult == POLLING_FINISHED )
{
// printDebug(3, "Job finished: " << workers_[nodeFinished].taskID_);
taskStatus[workers_[nodeFinished].taskID_] = STATUS_FINISHED;
runningJobCount--;
// Get the solution
edaBuffer result_buf;
// receive the result status
MPI_Recv( &l, 1, MPI_INT, nodeFinished, 0, MPI_COMM_WORLD, &mpiStat );
if ( l == EDA_MPI_SEARCH_FINISHED ) {
// receive the result into a buffer of characters
MPI_Recv( &j, 1, MPI_INT, nodeFinished, 0, MPI_COMM_WORLD, &mpiStat );
char *buf = new char[j];
MPI_Recv( buf, j, MPI_CHAR, nodeFinished, 0, MPI_COMM_WORLD, &mpiStat );
result_buf.setBuffer( j, buf );
edaSolutionList *result = (edaSolutionList*)classGenerateFromBuffer(result_buf);
taskSolutionList[workers_[nodeFinished].taskID_] = result;
searchOrder.push_back( workers_[nodeFinished].taskID_ );
workers_[nodeFinished].stat_ = EDA_MPI_PROCESSOR_IDLE;
}
checkLoopStatus(workers_[nodeFinished].taskID_);
}
// Job error
if ( pollingResult == POLLING_ERROR )
{
// printDebug(3, "Job error while running: " << workers_[nodeFinished].taskID_);
taskStatus[workers_[nodeFinished].taskID_] = STATUS_ERROR;
runningJobCount--;
searchOrder.remove( workers_[nodeFinished].taskID_ );
}
}
if (searchOrder.empty())
{
return false;
}
// TODO: Should return the best result among results
// printDebug(4, "Last search block is: " << searchOrder.back());
list = *(taskSolutionList[searchOrder.back()]);
return true;
}
static int64_t avalon2_scanhash(struct thr_info *thr)
{
struct avalon2_pkg send_pkg;
struct timeval current_stratum;
struct pool *pool;
struct cgpu_info *avalon2 = thr->cgpu;
struct avalon2_info *info = avalon2->device_data;
int64_t h;
uint32_t tmp, range, start;
int i;
if (thr->work_restart || thr->work_update || !info->first) {
applog(LOG_DEBUG, "Avalon2: New stratum: restart: %d, update: %d, first: %d",
thr->work_restart, thr->work_update, info->first);
thr->work_update = false;
thr->work_restart = false;
get_work(thr, thr->id); /* Make sure pool is ready */
pool = current_pool();
if (!pool->has_stratum)
quit(1, "Avalon2: Miner Manager have to use stratum pool");
if (pool->coinbase_len > AVA2_P_COINBASE_SIZE) {
applog(LOG_ERR, "Avalon2: Miner Manager pool coinbase length have to less then %d", AVA2_P_COINBASE_SIZE);
return 0;
}
if (pool->merkles > AVA2_P_MERKLES_COUNT) {
applog(LOG_ERR, "Avalon2: Miner Manager merkles have to less then %d", AVA2_P_MERKLES_COUNT);
return 0;
}
cgtime(&info->last_stratum);
cg_rlock(&pool->data_lock);
info->pool_no = pool->pool_no;
copy_pool_stratum(pool);
avalon2_stratum_pkgs(info->fd, pool, thr);
cg_runlock(&pool->data_lock);
/* Configuer the parameter from outside */
adjust_fan(info);
info->set_voltage = opt_avalon2_voltage_min;
info->set_frequency = opt_avalon2_freq_min;
/* Set the Fan, Voltage and Frequency */
memset(send_pkg.data, 0, AVA2_P_DATA_LEN);
tmp = be32toh(info->fan_pwm);
memcpy(send_pkg.data, &tmp, 4);
applog(LOG_ERR, "Avalon2: Temp max: %d, Cut off temp: %d",
get_current_temp_max(info), opt_avalon2_overheat);
if (get_current_temp_max(info) >= opt_avalon2_overheat)
tmp = encode_voltage(0);
else
tmp = encode_voltage(info->set_voltage);
tmp = be32toh(tmp);
memcpy(send_pkg.data + 4, &tmp, 4);
tmp = be32toh(info->set_frequency);
memcpy(send_pkg.data + 8, &tmp, 4);
/* Configure the nonce2 offset and range */
range = 0xffffffff / total_devices;
start = range * avalon2->device_id;
tmp = be32toh(start);
memcpy(send_pkg.data + 12, &tmp, 4);
tmp = be32toh(range);
memcpy(send_pkg.data + 16, &tmp, 4);
/* Package the data */
avalon2_init_pkg(&send_pkg, AVA2_P_SET, 1, 1);
while (avalon2_send_pkg(info->fd, &send_pkg, thr) != AVA2_SEND_OK)
;
if (unlikely(info->first < 2))
info->first++;
}
/* Stop polling the device if there is no stratum in 3 minutes, network is down */
cgtime(¤t_stratum);
if (tdiff(¤t_stratum, &(info->last_stratum)) > (double)(3.0 * 60.0))
return 0;
polling(thr);
h = 0;
for (i = 0; i < AVA2_DEFAULT_MODULARS; i++) {
h += info->enable[i] ? (info->local_work[i] - info->hw_work[i]) : 0;
}
return h * 0xffffffff;
}
static void poll_cb()
{
polling();
}
static int64_t hashratio_scanhash(struct thr_info *thr)
{
struct hashratio_pkg send_pkg;
struct pool *pool;
struct cgpu_info *hashratio = thr->cgpu;
struct hashratio_info *info = hashratio->device_data;
struct hashratio_ret ret_pkg;
uint32_t tmp, range, start;
int i;
if (thr->work_restart || thr->work_update || info->first) {
info->new_stratum = true;
applog(LOG_DEBUG, "hashratio: New stratum: restart: %d, update: %d, first: %d",
thr->work_restart, thr->work_update, info->first);
thr->work_update = false;
thr->work_restart = false;
if (unlikely(info->first))
info->first = false;
get_work(thr, thr->id); /* Make sure pool is ready */
pool = current_pool();
if (!pool->has_stratum)
quit(1, "hashratio: Miner Manager have to use stratum pool");
if (pool->coinbase_len > HRTO_P_COINBASE_SIZE)
quit(1, "hashratio: Miner Manager pool coinbase length have to less then %d", HRTO_P_COINBASE_SIZE);
if (pool->merkles > HRTO_P_MERKLES_COUNT)
quit(1, "hashratio: Miner Manager merkles have to less then %d", HRTO_P_MERKLES_COUNT);
info->diff = (int)pool->swork.diff - 1;
info->pool_no = pool->pool_no;
cg_wlock(&pool->data_lock);
hashratio_stratum_pkgs(info->fd, pool, thr);
cg_wunlock(&pool->data_lock);
/* Configuer the parameter from outside */
memset(send_pkg.data, 0, HRTO_P_DATA_LEN);
// fan
info->fan_pwm = HRTO_PWM_MAX;
tmp = be32toh(info->fan_pwm);
memcpy(send_pkg.data, &tmp, 4);
// freq
tmp = be32toh(info->default_freq);
memcpy(send_pkg.data + 4, &tmp, 4);
applog(LOG_DEBUG, "set freq: %d", info->default_freq);
/* Configure the nonce2 offset and range */
range = 0xffffffff / total_devices;
start = range * hashratio->device_id;
tmp = be32toh(start);
memcpy(send_pkg.data + 8, &tmp, 4);
tmp = be32toh(range);
memcpy(send_pkg.data + 12, &tmp, 4);
/* Package the data */
hashratio_init_pkg(&send_pkg, HRTO_P_SET, 1, 1);
while (hashratio_send_pkg(info->fd, &send_pkg, thr) != HRTO_SEND_OK)
;
info->new_stratum = false;
}
polling(thr);
return (int64_t)info->local_work * 64 * 0xffffffff;
}
static int64_t avalon2_scanhash(struct thr_info *thr)
{
struct avalon2_pkg send_pkg;
struct pool *pool;
struct cgpu_info *avalon2 = thr->cgpu;
struct avalon2_info *info = avalon2->device_data;
int64_t h;
uint32_t tmp, range, start;
int i;
if (thr->work_restart || thr->work_update ||
info->first) {
info->new_stratum = true;
applog(LOG_DEBUG, "Avalon2: New stratum: restart: %d, update: %d, first: %d",
thr->work_restart, thr->work_update, info->first);
thr->work_update = false;
thr->work_restart = false;
if (unlikely(info->first))
info->first = false;
get_work(thr, thr->id); /* Make sure pool is ready */
pool = current_pool();
if (!pool->has_stratum)
quit(1, "Avalon2: Miner Manager have to use stratum pool");
if (pool->swork.cb_len > AVA2_P_COINBASE_SIZE)
quit(1, "Avalon2: Miner Manager pool coinbase length have to less then %d", AVA2_P_COINBASE_SIZE);
if (pool->swork.merkles > AVA2_P_MERKLES_COUNT)
quit(1, "Avalon2: Miner Manager merkles have to less then %d", AVA2_P_MERKLES_COUNT);
info->diff = (int)pool->swork.diff - 1;
info->pool_no = pool->pool_no;
cg_wlock(&pool->data_lock);
avalon2_stratum_pkgs(info->fd, pool, thr);
cg_wunlock(&pool->data_lock);
/* Configuer the parameter from outside */
info->fan_pwm = opt_avalon2_fan_min;
info->set_voltage = opt_avalon2_voltage_min;
info->set_frequency = opt_avalon2_freq_min;
/* Set the Fan, Voltage and Frequency */
memset(send_pkg.data, 0, AVA2_P_DATA_LEN);
tmp = be32toh(info->fan_pwm);
memcpy(send_pkg.data, &tmp, 4);
tmp = encode_voltage(info->set_voltage);
tmp = be32toh(tmp);
memcpy(send_pkg.data + 4, &tmp, 4);
tmp = be32toh(info->set_frequency);
memcpy(send_pkg.data + 8, &tmp, 4);
/* Configure the nonce2 offset and range */
range = 0xffffffff / total_devices;
start = range * avalon2->device_id;
tmp = be32toh(start);
memcpy(send_pkg.data + 12, &tmp, 4);
tmp = be32toh(range);
memcpy(send_pkg.data + 16, &tmp, 4);
/* Package the data */
avalon2_init_pkg(&send_pkg, AVA2_P_SET, 1, 1);
while (avalon2_send_pkg(info->fd, &send_pkg, thr) != AVA2_SEND_OK)
;
info->new_stratum = false;
}
polling(thr);
h = 0;
for (i = 0; i < AVA2_DEFAULT_MODULARS; i++) {
h += info->local_work[i];
}
return h * 0xffffffff;
}
void help()
{
while(1) {
serial_println("Which command would you like to know more about?");
serial_println("Enter \"commands\" for a list of commands.");
serial_println("Enter \"quit\" to exit.");
char *command = polling();
if (!strcmpigncase(command, "commands")) {
serial_println("Here's a list of available commands:");
serial_println("Version");
serial_println("Help");
serial_println("Setdate");
serial_println("Getdate");
serial_println("Settime");
serial_println("Gettime");
serial_println("Shutdown");
serial_println("Suspend");
serial_println("Resume");
serial_println("SetPriority");
serial_println("ShowPCB");
serial_println("ShowAll");
serial_println("ShowReady");
serial_println("ShowBlocked");
serial_println("Loadr3");
serial_println("Allocate");
serial_println("printFree");
serial_println("printAlloc");
serial_println("freeMemory");
serial_println("");
}
else if (!strcmpigncase(command, "quit")) {
break;
}
else if (!strcmpigncase(command, "allocate")) {
serial_println("Allocates the specified amount of memory from the heap.");
break;
}
else if (!strcmpigncase(command, "printfree")) {
serial_println("Displays a list of all free memory blocks, along with basic information.");
break;
}
else if (!strcmpigncase(command, "printalloc")) {
serial_println("Displays a list of all allocated memory blocks, along with basic information.");
break;
}
else if (!strcmpigncase(command, "freememory")) {
serial_println("Frees an allocated memory block with a specified address.");
break;
}
else if (!strcmpigncase(command, "version")) {
serial_println("Version shows the current version of the operating system, and it's release date.");
break;
}
else if (!strcmpigncase(command, "help")) {
serial_println("Help gets further help for a prompted command.");
break;
}
else if (!strcmpigncase(command, "setdate")) {
serial_println("Setdate allows the user to set the date of the operating system through a series of prompts.");
serial_println("The prompt follows a format of yy mm dd.");
break;
}
else if (!strcmpigncase(command, "getdate")) {
serial_println("Getdate returns the current date of the operating system.");
break;
}
else if (!strcmpigncase(command, "settime")) {
serial_println("Settime allows the user to set the time of the operating system through a series of prompts.");
serial_println("The prompt follows a format of HH MM SS.");
break;
}
else if (!strcmpigncase(command, "gettime")) {
serial_println("Gettime returns the current date of the operating system.");
break;
}
else if (!strcmpigncase(command, "shutdown")) {
serial_println("Shutdown presents the user with the option to terminate the system.");
break;
}
else if (!strcmpigncase(command, "suspend")) {
serial_println("Places a PCB in a suspended state and reinserts it into the appropriate queue.");
break;
}
else if (!strcmpigncase(command, "resume")) {
serial_println("Places a PCB in in the not suspended state and reinserts it into the appropriate queue.");
break;
}
else if (!strcmpigncase(command, "setpriority")) {
serial_println("Sets a PCB's priority and reinserts the process into the correct place in the correct queue");
break;
}
else if (!strcmpigncase(command, "showPCB")) {
serial_println("Displays the following information for a PCB:");
serial_println("Process Name");
serial_println("Class");
serial_println("State");
serial_println("Suspended Status");
serial_println("Priority");
serial_println("");
break;
}
else if (!strcmpigncase(command, "showall")) {
serial_println("Displays the folling information for each PCB in the ready and blocked queues.");
serial_println("Process Name");
serial_println("Class");
serial_println("State");
serial_println("Suspended Status");
serial_println("Priority");
serial_println("");
break;
}
else if (!strcmpigncase(command, "showready")) {
serial_println("Displays the folling information for each PCB in the ready queue.");
serial_println("Process Name");
serial_println("Class");
serial_println("State");
serial_println("Suspended Status");
serial_println("Priority");
serial_println("");
break;
}
else if (!strcmpigncase(command, "showblocked")) {
serial_println("Displays the following information for each PCB in the blocked queue.");
serial_println("Process Name");
serial_println("Class");
serial_println("State");
serial_println("Suspended Status");
serial_println("Priority");
serial_println("");
break;
}
else if (!strcmpigncase(command, "loadr3")) {
serial_println("Loads all r3 processes into memory in a ready blocked state. Used for testing of multiprogramming functionality.");
break;
}
else {
serial_print("Unrecognized command: ");
serial_println(command);
}
sys_free_mem(command);
}
serial_println("");
}
