static void
do_reload(void)
{
int e = 0;
drivers_unload_all(); /* Close all drivers */
config_clear();
clear_settings();
/* Reread command line*/
CHAIN(e, process_command_line(stored_argc, stored_argv));
/* Reread config file */
if (strcmp(configfile, UNSET_STR)==0)
strncpy(configfile, DEFAULT_CONFIGFILE, sizeof(configfile));
CHAIN(e, process_configfile(configfile));
/* Set default values */
CHAIN(e, (set_default_settings(), 0));
/* Set reporting values */
CHAIN(e, set_reporting("LCDd", report_level, report_dest));
CHAIN(e, (report(RPT_INFO, "Set report level to %d, output to %s", report_level,
((report_dest == RPT_DEST_SYSLOG) ? "syslog" : "stderr")), 0));
/* And restart the drivers */
CHAIN(e, init_drivers());
CHAIN_END(e, "Critical error while reloading, abort.");
}
void check_sig(int signr)
{
int nr;
char buffer[MAX_LOGMESSAGE_SIZE];
switch (signr) {
case SIGINT:
LOG(0, "Caught SIGINT - Good bye\n");
exit(EXIT_SUCCESS);
break;
case SIGTERM:
LOG(0, "Caught Termination Signal - Astalavista... baby\n");
exit(EXIT_SUCCESS);
break;
case SIGHUP:
LOG(0, "Caught SIGHUP - reloading configuration\n");
sighup_detected = TRUE;
process_configfile(config_file);
if (check_needed_config_options() != 0) {
LOG(0, "There is an error in the config! Exiting...\n");
exit(EXIT_FAILURE);
}
prepare_vars();
LOG(0, "Configuration reload succesfull.\n");
break;
default:
snprintf(buffer, sizeof(buffer - 1),
"Caught the Signal '%d' but don't care about this.\n",
signr);
LOG(2, buffer);
break;
}
}
int
main(int argc, char **argv)
{
int cfgresult;
int c;
/* set locale for cwdate & time formatting in chrono.c */
setlocale(LC_TIME, "");
/* get uname information */
if (uname(&unamebuf) == -1) {
perror("uname");
return (EXIT_FAILURE);
}
/* setup error handlers */
signal(SIGINT, exit_program); /* Ctrl-C */
signal(SIGTERM, exit_program); /* "regular" kill */
signal(SIGHUP, exit_program); /* kill -HUP */
signal(SIGPIPE, exit_program); /* write to closed socket */
signal(SIGKILL, exit_program); /* kill -9 [cannot be trapped; but ...] */
/* No error output from getopt */
opterr = 0;
/* get options from command line */
while ((c = getopt(argc, argv, "s:p:e:c:fhv")) > 0) {
char *end;
switch (c) {
/* c is for config file */
case 'c':
configfile = optarg;
break;
/* s is for server */
case 's':
server = optarg;
break;
/* p is for port */
case 'p':
port = strtol(optarg, &end, 0);
if ((*optarg == '\0') || (*end != '\0') ||
(port <= 0) || (port >= 0xFFFF)) {
fprintf(stderr, "Illegal port value %s\n", optarg);
exit(EXIT_FAILURE);
}
break;
case 'e':
islow = strtol(optarg, &end, 0);
if ((*optarg == '\0') || (*end != '\0') || (islow < 0)) {
fprintf(stderr, "Illegal delay value %s\n", optarg);
exit(EXIT_FAILURE);
}
break;
case 'f':
foreground = TRUE;
break;
case 'h':
HelpScreen(EXIT_SUCCESS);
break;
case 'v':
fprintf(stderr, "LCDproc %s\n", version);
exit(EXIT_SUCCESS);
break;
/* otherwise... Get help! */
case '?': /* unknown option or missing argument */
/* FALLTHROUGH */
default:
HelpScreen(EXIT_FAILURE);
break;
}
}
/* Read config file */
cfgresult = process_configfile(configfile);
if (cfgresult < 0) {
fprintf(stderr, "Error reading config file\n");
exit(EXIT_FAILURE);
}
/* Set default reporting options */
if (report_dest == UNSET_INT)
report_dest = DEFAULT_REPORTDEST;
if (report_level == UNSET_INT)
report_level = DEFAULT_REPORTLEVEL;
/* Set reporting settings */
set_reporting("lcdproc", report_level, report_dest);
/* parse non-option arguments: modes to add/delete */
if (argc > max(optind, 1)) {
int i;
/*
* if no config file was read, ignore hard coded default
* modes
*/
if (cfgresult == 0)
clear_modes();
/* turn additional options on or off (using ! as prefix) */
for (i = max(optind, 1); i < argc; i++) {
int state = (*argv[i] == '!') ? 0 : 1;
char *name = (state) ? argv[i] : argv[i] + 1;
int shortname = (strlen(name) == 1) ? name[0] : '\0';
int found = set_mode(shortname, name, state);
if (!found) {
fprintf(stderr, "Invalid Screen: %s\n", name);
return (EXIT_FAILURE);
}
}
}
if (server == NULL)
server = DEFAULT_SERVER;
/* Connect to the server... */
sock = sock_connect(server, port);
if (sock < 0) {
fprintf(stderr, "Error connecting to LCD server %s on port %d.\n"
"Check to see that the server is running and operating normally.\n",
server, port);
return (EXIT_FAILURE);
}
sock_send_string(sock, "hello\n");
usleep(500000); /* wait for the server to say hi. */
/* We grab the real values below, from the "connect" line. */
lcd_wid = 20;
lcd_hgt = 4;
lcd_cellwid = 5;
lcd_cellhgt = 8;
if (foreground != TRUE) {
if (daemon(1, 0) != 0) {
fprintf(stderr, "Error: daemonize failed\n");
return (EXIT_FAILURE);
}
if (pidfile != NULL) {
FILE *pidf = fopen(pidfile, "w");
if (pidf) {
fprintf(pidf, "%d\n", (int)getpid());
fclose(pidf);
pidfile_written = TRUE;
}
else {
fprintf(stderr, "Error creating pidfile %s: %s\n",
pidfile, strerror(errno));
return (EXIT_FAILURE);
}
}
}
/* Init the status gatherers... */
mode_init();
/* And spew stuff! */
main_loop();
exit_program(EXIT_SUCCESS);
/* NOTREACHED */
return EXIT_SUCCESS;
}
int
main(int argc, char **argv)
{
int e = 0;
pid_t parent_pid = 0;
stored_argc = argc;
stored_argv = argv;
/*
* Settings in order of preference:
*
* 1: Settings specified in command line options...
* 2: Settings specified in configuration file...
* 3: Default settings
*
* Because of this, and because one option (-c) specifies where
* the configuration file is, things are done in this order:
*
* 1. Read and set options.
* 2. Read configuration file; if option is read in configuration
* file and not already set, then set it.
* 3. Having read configuration file, if parameter is not set,
* set it to the default value.
*
* It is for this reason that the default values are **NOT** set
* in the variable declaration...
*/
/* Report that server is starting (report will be delayed) */
report(RPT_NOTICE, "LCDd version %s starting", version);
report(RPT_INFO, "Built on %s, protocol version %s, API version %s",
build_date, protocol_version, api_version);
clear_settings();
/* Read command line*/
CHAIN(e, process_command_line(argc, argv));
/* Read config file
* If config file was not given on command line use default */
if (strcmp(configfile, UNSET_STR) == 0)
strncpy(configfile, DEFAULT_CONFIGFILE, sizeof(configfile));
CHAIN(e, process_configfile(configfile));
/* Set default values*/
set_default_settings();
/* Set reporting settings (will also flush delayed reports) */
set_reporting("LCDd", report_level, report_dest);
report(RPT_INFO, "Set report level to %d, output to %s", report_level,
((report_dest == RPT_DEST_SYSLOG) ? "syslog" : "stderr"));
CHAIN_END(e, "Critical error while processing settings, abort.");
/* Now, go into daemon mode (if we should)...
* We wait for the child to report it is running OK. This mechanism
* is used because forking after starting the drivers causes the
* child to loose the (LPT) port access. */
if (!foreground_mode) {
report(RPT_INFO, "Server forking to background");
CHAIN(e, parent_pid = daemonize());
} else {
output_GPL_notice();
report(RPT_INFO, "Server running in foreground");
}
install_signal_handlers(!foreground_mode);
/* Only catch SIGHUP if not in foreground mode */
/* Startup the subparts of the server */
CHAIN(e, sock_init(bind_addr, bind_port));
CHAIN(e, screenlist_init());
CHAIN(e, init_drivers());
CHAIN(e, clients_init());
CHAIN(e, input_init());
CHAIN(e, menuscreens_init());
CHAIN(e, server_screen_init());
CHAIN_END(e, "Critical error while initializing, abort.");
if (!foreground_mode) {
/* Tell to parent that startup went OK. */
wave_to_parent(parent_pid);
}
drop_privs(user); /* This can't be done before, because sending a
signal to a process of a different user will fail */
do_mainloop();
/* This loop never stops; we'll get out only with a signal...*/
return 0;
}
int main(int argc, char **argv) {
int i = 0;
int filecounter = 0, pthread_ret = 0;
double load;
char buffer[MAX_LOGMESSAGE_SIZE];
FILE *fppid = NULL;
struct dirent **namelist;
load = 0.0;
if (process_arguments(argc, argv) == EXIT_FAILURE)
exit(EXIT_FAILURE);
process_configfile(config_file);
if (loglevel == -1) {
printf("DEBUG: Config File = %s\n", config_file);
printf("CONFIG_OPT_LOGTYPE = %s\n", macro_x[CONFIG_OPT_LOGTYPE]);
printf("CONFIG_OPT_LOGFILE = %s\n", macro_x[CONFIG_OPT_LOGFILE]);
printf("CONFIG_OPT_LOGFILESIZE = %s\n", macro_x[CONFIG_OPT_LOGFILESIZE]);
printf("CONFIG_OPT_LOGLEVEL = %s\n", macro_x[CONFIG_OPT_LOGLEVEL]);
printf("CONFIG_OPT_SCANDIR = %s\n", macro_x[CONFIG_OPT_SCANDIR]);
printf("CONFIG_OPT_RUNCMD = %s\n", macro_x[CONFIG_OPT_RUNCMD]);
printf("CONFIG_OPT_RUNCMD_ARG = %s\n", macro_x[CONFIG_OPT_RUNCMD_ARG]);
printf("CONFIG_OPT_MAXTHREADS = %s\n", macro_x[CONFIG_OPT_MAXTHREADS]);
printf("CONFIG_OPT_LOAD = %s\n", macro_x[CONFIG_OPT_LOAD]);
printf("CONFIG_OPT_USER = %s\n", macro_x[CONFIG_OPT_USER]);
printf("CONFIG_OPT_GROUP = %s\n", macro_x[CONFIG_OPT_GROUP]);
printf("CONFIG_OPT_PIDFILE = %s\n", macro_x[CONFIG_OPT_PIDFILE]);
printf("CONFIG_OPT_SLEEPTIME = %s\n", macro_x[CONFIG_OPT_SLEEPTIME]);
printf("CONFIG_OPT_IDENTMYSELF = %s\n", macro_x[CONFIG_OPT_IDENTMYSELF]);
printf("---------------------------\n");
if (check_needed_config_options() != 0) {
printf("There is an Error! Exiting...\n");
exit(EXIT_FAILURE);
}
}
if (prepare_vars() != 0)
exit(EXIT_FAILURE);
if (loglevel == -1)
printf("DEBUG: load_threshold is %s - ('%f')\n",
use_load_threshold ? "enabled" : "disabled", load_threshold);
pthread_t th[max_threads];
for (i=0;i<max_threads;i++){
th[i] = (pthread_t) NULL;
}
i = 0;
/* Nice point for another function to set
* the internal vars from macro_x[] */
/* Start in Daemon Mode or in foreground? */
if (daemon_mode == TRUE)
start_daemon("NPCD", LOG_LOCAL0);
else if (use_syslog)
openlog("NPCD", LOG_PID | LOG_CONS | LOG_NDELAY, LOG_LOCAL0);
/* Create PID File or exit on failure */
if (daemon_mode == TRUE && sighup_detected == FALSE) {
fppid = fopen(pidfile, "w");
if (fppid == NULL) {
printf("Could not open pidfile '%s': %s\n", pidfile,
strerror(errno));
exit(EXIT_FAILURE);
} else {
fprintf(fppid, "%d", getpid());
fclose(fppid);
}
}
/* Try to drop the privileges */
if (drop_privileges(user, group) == EXIT_FAILURE)
exit(EXIT_FAILURE);
snprintf(buffer, sizeof(buffer) - 1,
"%s Daemon (%s) started with PID=%d\n", progname, PACKAGE_VERSION,
getpid());
LOG(0, buffer);
snprintf(buffer, sizeof(buffer) - 1,
"Please have a look at '%s -V' to get license information\n",
progname);
LOG(0, buffer);
//sigemptyset();
handle_signal(SIGINT, check_sig);
handle_signal(SIGHUP, check_sig);
handle_signal(SIGTERM, check_sig);
snprintf(buffer, sizeof(buffer) - 1,
"HINT: load_threshold is %s - ('%f')\n",
use_load_threshold ? "enabled" : "disabled", load_threshold);
LOG(0, buffer);
/* beginn main loop */
while (1) {
if (chdir(directory) != 0)
exit(EXIT_FAILURE);
/* is_file() filter may cause trouble on some systems
* like Solaris or HP-UX that don't have a d-type
* member in struct dirent
*/
/* #ifdef HAVE_STRUCT_DIRENT_D_TYPE
if ( ( filecounter = scandir( directory, &namelist, is_file, alphasort ) ) < 0 ) {
#else */
if ((filecounter = scandir(directory, &namelist, 0, alphasort)) < 0) {
/* #endif */
snprintf(buffer, sizeof(buffer) - 1,
"Error while get file list from spooldir (%s) - %s\n",
directory, strerror(errno));
LOG(0, buffer);
snprintf(buffer, sizeof(buffer) - 1, "Exiting...\n");
LOG(0, buffer);
if (daemon_mode != TRUE)
printf("Error while get file list from spooldir (%s) - %s\n",
directory, strerror(errno));
break;
}
snprintf(buffer, sizeof(buffer) - 1, "Found %d files in %s\n",
filecounter, directory);
LOG(2, buffer);
for (i = 0, namelist; i < filecounter; i++) {
#ifdef HAVE_GETLOADAVG
if (use_load_threshold == TRUE) {
load = getload(1);
snprintf(buffer, sizeof(buffer) - 1, "DEBUG: load %f/%f\n",
load, load_threshold);
LOG(2, buffer);
}
if (use_load_threshold && (load > load_threshold)) {
snprintf(buffer, sizeof(buffer) - 1,
"WARN: MAX load reached: load %f/%f at i=%d", load,
load_threshold, i);
LOG(0, buffer);
if (i > 0)
i--;
sleep(sleeptime);
continue;
}
#endif
snprintf(buffer, sizeof(buffer) - 1,
"ThreadCounter %d/%d File is %s\n", thread_counter,
max_threads, namelist[i]->d_name);
LOG(2, buffer);
struct stat attribute;
if (stat(namelist[i]->d_name, &attribute) == -1) {
LOG(0, "Error while getting file status");
break;
}
if (strstr((namelist[i]->d_name), "-PID-") != NULL) {
snprintf(
buffer,
sizeof(buffer) - 1,
"File '%s' is an already in process PNP file. Leaving it untouched.\n",
namelist[i]->d_name);
LOG(1, buffer);
continue;
}
if (S_ISREG(attribute.st_mode)) {
snprintf(buffer, sizeof(buffer) - 1, "Regular File: %s\n",
namelist[i]->d_name);
LOG(2, buffer);
/* only start new threads if the max_thread config option is not reached */
if (thread_counter < max_threads && we_should_stop == FALSE) {
if ((pthread_ret = pthread_create(&th[thread_counter],
NULL, processfile, namelist[i]->d_name)) != 0) {
snprintf(buffer, sizeof(buffer) - 1,
"Could not create thread... exiting with error '%s'\n", strerror(errno));
LOG(0, buffer);
exit(EXIT_FAILURE);
}
snprintf(buffer, sizeof(buffer) - 1,
"A thread was started on thread_counter = %d\n",
thread_counter);
LOG(2, buffer);
thread_counter++;
}
else if (we_should_stop == TRUE)
break;
else {
snprintf(
buffer,
sizeof(buffer) - 1,
"WARN: MAX Thread reached: %s comes later with ThreadCounter: %d\n",
namelist[i]->d_name, thread_counter);
LOG(2, buffer);
i--;
for (thread_counter = thread_counter; thread_counter > 0; thread_counter--) {
snprintf(buffer, sizeof(buffer) - 1,
"DEBUG: Will wait for th['%d']\n",
thread_counter - 1);
LOG(2, buffer);
pthread_join(th[thread_counter - 1], NULL);
}
}
}
}
if (thread_counter > 0) {
/* Wait for open threads before working on the next run */
snprintf(buffer, sizeof(buffer) - 1,
"Have to wait: Filecounter = %d - thread_counter = %d\n",
filecounter - 2, thread_counter);
LOG(2, buffer);
for (thread_counter = thread_counter; thread_counter > 0; thread_counter--)
pthread_join(th[thread_counter - 1], NULL);
}
if (we_should_stop == TRUE)
break;
for (i = 0, namelist; i < filecounter; i++) {
free(namelist[i]);
}
free(namelist);
snprintf(buffer, sizeof(buffer) - 1,
"No more files to process... waiting for %d seconds\n",
sleeptime);
LOG(1, buffer);
sleep(sleeptime);
}
snprintf(buffer, sizeof(buffer) - 1, "Daemon ended. PID was '%d'\n",
getpid());
LOG(0, buffer);
if (use_syslog)
closelog();
return EXIT_SUCCESS;
}
int main(int argc, char *argv[])
{
SDL_Event event;
atexit(main_exit);
process_configfile();
process_options(argc, argv);
// use g_nports if specified, otherwise use the number of port arguments.
// if neither is given, create just one port
int nportargs = argc - optind;
g_nports = max(1, g_nports ? : nportargs);
// now that we know the actual number of ports, repeat the last color/scale/height value
// as often as necessary
if (g_colors) {
g_colors = (Uint32*)realloc(g_colors, g_nports * sizeof(Uint32));
for (int n = ncolors; n < g_nports; ++n) {
g_colors[n] = g_colors[ncolors - 1];
}
}
if (g_scales) {
g_scales = (float*)realloc(g_scales, g_nports * sizeof(float));
for (int n = nscales; n < g_nports; ++n) {
g_scales[n] = g_scales[nscales - 1];
}
}
if (g_heights) {
g_heights = (int*)realloc(g_heights, g_nports * sizeof(int));
for (int n = nheights; n < g_nports; ++n) {
g_heights[n] = g_heights[nheights - 1];
}
// g_heights overrides g_height
g_height = 0;
for (int n = 0; n < g_nports; ++n) {
g_height += g_heights[n];
}
g_total_height = g_height;
}
if (SDL_Init(SDL_INIT_VIDEO) < 0) {
fprintf(stderr, "can't init SDL: %s\n", SDL_GetError());
exit(EXIT_FAILURE);
}
atexit(SDL_Quit);
audio_init(g_client_name, (const char * const *)&argv[optind]);
video_init();
SDL_WM_SetCaption(audio_get_client_name(), NULL);
waves_init();
g_run = true;
while (g_run)
{
while (SDL_PollEvent(&event))
{
switch (event.type)
{
case SDL_VIDEORESIZE:
video_resize(event.resize.w, event.resize.h);
audio_adjust();
waves_adjust();
break;
case SDL_QUIT:
g_run = false;
break;
}
}
waves_draw();
video_flip();
}
return 0;
}
