void beamishSwitchInit(void) {
protocol_register(&beamish_switch);
protocol_set_id(beamish_switch, "beamish_switch");
protocol_device_add(beamish_switch, "beamish_switch", "beamish_switch Switches");
beamish_switch->devtype = SWITCH;
beamish_switch->hwtype = RF433;
beamish_switch->txrpt = NORMAL_REPEATS;
beamish_switch->minrawlen = RAW_LENGTH;
beamish_switch->maxrawlen = RAW_LENGTH;
beamish_switch->maxgaplen = MAX_PULSE_LENGTH*PULSE_DIV;
beamish_switch->mingaplen = MIN_PULSE_LENGTH*PULSE_DIV;
options_add(&beamish_switch->options, "t", "on", OPTION_NO_VALUE, DEVICES_STATE, JSON_STRING, NULL, NULL);
options_add(&beamish_switch->options, "f", "off", OPTION_NO_VALUE, DEVICES_STATE, JSON_STRING, NULL, NULL);
options_add(&beamish_switch->options, "u", "unit", OPTION_HAS_VALUE, DEVICES_ID, JSON_NUMBER, NULL, "^([1-4])$");
options_add(&beamish_switch->options, "i", "id", OPTION_HAS_VALUE, DEVICES_ID, JSON_NUMBER, NULL, "^([0-9]{1,4}|[1-5][0-9]{4}|6[0-4][0-9]{3}|65[0-4][0-9]{2}|655[0-2][0-9]|6553[0-5])$");
options_add(&beamish_switch->options, "a", "all", OPTION_NO_VALUE, 0, JSON_NUMBER, NULL, NULL);
options_add(&beamish_switch->options, "0", "readonly", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)0, "^[10]{1}$");
options_add(&beamish_switch->options, "0", "confirm", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)0, "^[10]{1}$");
beamish_switch->parseCode=&parseCode;
beamish_switch->createCode=&createCode;
beamish_switch->printHelp=&printHelp;
beamish_switch->validate=&validate;
}
void arctechSwInit(void) {
strcpy(arctech_switch.id, "archtech_switches");
protocol_add_device(&arctech_switch, "kaku_switch", "KlikAanKlikUit Switches");
protocol_add_device(&arctech_switch, "dio_switch", "D-IO (Chacon) Switches");
protocol_add_device(&arctech_switch, "nexa_switch", "Nexa Switches");
protocol_add_device(&arctech_switch, "coco_switch", "CoCo Technologies Switches");
protocol_add_conflict(&arctech_switch, "archtech_dimmers");
arctech_switch.type = SWITCH;
arctech_switch.header = 9;
arctech_switch.pulse = 5;
arctech_switch.footer = 35;
arctech_switch.length = 132;
arctech_switch.message = malloc(sizeof(JsonNode));
arctech_switch.bit = 0;
arctech_switch.recording = 0;
addOption(&arctech_switch.options, 'a', "all", no_value, 0, NULL);
addOption(&arctech_switch.options, 't', "on", no_value, config_state, NULL);
addOption(&arctech_switch.options, 'f', "off", no_value, config_state, NULL);
addOption(&arctech_switch.options, 'u', "unit", has_value, config_id, "^([0-9]{1}|[1][0-6])$");
addOption(&arctech_switch.options, 'i', "id", has_value, config_id, "^([0-9]{1,7}|[1-5][0-9]{7}|6([0-6][0-9]{6}|7(0[0-9]{5}|10([0-7][0-9]{3}|8([0-7][0-9]{2}|8([0-5][0-9]|6[0-3]))))))$");
arctech_switch.parseBinary=&arctechSwParseBinary;
arctech_switch.createCode=&arctechSwCreateCode;
arctech_switch.printHelp=&arctechSwPrintHelp;
protocol_register(&arctech_switch);
}
void arctechSwitchInit(void) {
protocol_register(&arctech_switch);
protocol_set_id(arctech_switch, "arctech_switch");
protocol_device_add(arctech_switch, "kaku_switch", "KlikAanKlikUit Switches");
protocol_device_add(arctech_switch, "dio_switch", "D-IO Switches");
protocol_device_add(arctech_switch, "nexa_switch", "Nexa Switches");
protocol_device_add(arctech_switch, "coco_switch", "CoCo Technologies Switches");
protocol_device_add(arctech_switch, "intertechno_switch", "Intertechno Switches");
arctech_switch->devtype = SWITCH;
arctech_switch->hwtype = RF433;
arctech_switch->txrpt = NORMAL_REPEATS;
arctech_switch->minrawlen = RAW_LENGTH;
arctech_switch->maxrawlen = RAW_LENGTH;
arctech_switch->maxgaplen = MAX_PULSE_LENGTH*PULSE_DIV;
arctech_switch->mingaplen = MIN_PULSE_LENGTH*PULSE_DIV;
options_add(&arctech_switch->options, "t", "on", OPTION_NO_VALUE, DEVICES_STATE, JSON_STRING, NULL, NULL);
options_add(&arctech_switch->options, "f", "off", OPTION_NO_VALUE, DEVICES_STATE, JSON_STRING, NULL, NULL);
options_add(&arctech_switch->options, "u", "unit", OPTION_HAS_VALUE, DEVICES_ID, JSON_NUMBER, NULL, "^([0-9]{1}|[1][0-5])$");
options_add(&arctech_switch->options, "i", "id", OPTION_HAS_VALUE, DEVICES_ID, JSON_NUMBER, NULL, "^([0-9]{1,7}|[1-5][0-9]{7}|6([0-6][0-9]{6}|7(0[0-9]{5}|10([0-7][0-9]{3}|8([0-7][0-9]{2}|8([0-5][0-9]|6[0-3]))))))$");
options_add(&arctech_switch->options, "a", "all", OPTION_OPT_VALUE, DEVICES_OPTIONAL, JSON_NUMBER, NULL, NULL);
options_add(&arctech_switch->options, "l", "learn", OPTION_NO_VALUE, DEVICES_OPTIONAL, JSON_NUMBER, NULL, NULL);
options_add(&arctech_switch->options, "0", "readonly", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)0, "^[10]{1}$");
options_add(&arctech_switch->options, "0", "confirm", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)0, "^[10]{1}$");
arctech_switch->parseCode=&parseCode;
arctech_switch->createCode=&createCode;
arctech_switch->printHelp=&printHelp;
arctech_switch->validate=&validate;
}
void threechanInit(void) {
protocol_register(&threechan);
protocol_set_id(threechan, "threechan");
protocol_device_add(threechan, "threechan", "3 Channel Weather Stations");
protocol_plslen_add(threechan, 266);
protocol_conflict_add(threechan, "alecto");
protocol_conflict_add(threechan, "teknihall");
threechan->devtype = WEATHER;
threechan->hwtype = RF433;
threechan->pulse = 15;
threechan->rawlen = 74;
options_add(&threechan->options, 't', "temperature", OPTION_HAS_VALUE, CONFIG_VALUE, JSON_NUMBER, NULL, "^[0-9]{1,3}$");
options_add(&threechan->options, 'i', "id", OPTION_HAS_VALUE, CONFIG_ID, JSON_NUMBER, NULL, "[0-9]");
options_add(&threechan->options, 'h', "humidity", OPTION_HAS_VALUE, CONFIG_VALUE, JSON_NUMBER, NULL, "[0-9]");
options_add(&threechan->options, 'b', "battery", OPTION_HAS_VALUE, CONFIG_VALUE, JSON_NUMBER, NULL, "^[01]$");
options_add(&threechan->options, 0, "device-decimals", OPTION_HAS_VALUE, CONFIG_SETTING, JSON_NUMBER, (void *)1, "[0-9]");
options_add(&threechan->options, 0, "gui-decimals", OPTION_HAS_VALUE, CONFIG_SETTING, JSON_NUMBER, (void *)1, "[0-9]");
options_add(&threechan->options, 0, "gui-show-humidity", OPTION_HAS_VALUE, CONFIG_SETTING, JSON_NUMBER, (void *)1, "^[10]{1}$");
options_add(&threechan->options, 0, "gui-show-temperature", OPTION_HAS_VALUE, CONFIG_SETTING, JSON_NUMBER, (void *)1, "^[10]{1}$");
options_add(&threechan->options, 0, "gui-show-battery", OPTION_HAS_VALUE, CONFIG_SETTING, JSON_NUMBER, (void *)1, "^[10]{1}$");
threechan->parseCode=&threechanParseCode;
}
void impulsInit(void) {
protocol_register(&impuls);
impuls->id = malloc(7);
strcpy(impuls->id, "impuls");
protocol_add_device(impuls, "impuls", "Impuls Switches");
protocol_add_device(impuls, "select-remote", "SelectRemote Switches");
impuls->type = SWITCH;
impuls->pulse = 3;
impuls->footer = 33;
impuls->rawLength = 50;
//impuls->binLength = 12;
//impuls->lsb = 1;
/*impuls->bit = 0;
impuls->recording = 0;*/
options_add(&impuls->options, 's', "systemcode", has_value, config_id, "^(3[012]?|[012][0-9]|[0-9]{1})$");
options_add(&impuls->options, 'u', "programcode", has_value, config_id, "^(3[012]?|[012][0-9]|[0-9]{1})$");
options_add(&impuls->options, 't', "on", no_value, config_state, NULL);
options_add(&impuls->options, 'f', "off", no_value, config_state, NULL);
//impuls->parseCode=&impulsParseCode;
impuls->createCode=&impulsCreateCode;
impuls->printHelp=&impulsPrintHelp;
}
void quiggGT7000Init(void) {
protocol_register(&quigg_gt7000);
protocol_set_id(quigg_gt7000, "quigg_gt7000");
protocol_device_add(quigg_gt7000, "quigg_gt7000", "Quigg GT-7000 Switches");
quigg_gt7000->devtype = SWITCH;
quigg_gt7000->hwtype = RF433;
quigg_gt7000->txrpt = NORMAL_REPEATS; // SHORT: GT-FSI-04a range: 620... 960
quigg_gt7000->minrawlen = RAW_LENGTH;
quigg_gt7000->maxrawlen = RAW_LENGTH;
quigg_gt7000->maxgaplen = (int)(PULSE_QUIGG_FOOTER*0.9);
quigg_gt7000->mingaplen = (int)(PULSE_QUIGG_FOOTER*1.1);
options_add(&quigg_gt7000->options, "t", "on", OPTION_NO_VALUE, DEVICES_STATE, JSON_STRING, NULL, NULL);
options_add(&quigg_gt7000->options, "f", "off", OPTION_NO_VALUE, DEVICES_STATE, JSON_STRING, NULL, NULL);
options_add(&quigg_gt7000->options, "u", "unit", OPTION_HAS_VALUE, DEVICES_ID, JSON_NUMBER, NULL, "^([0-3])$");
options_add(&quigg_gt7000->options, "i", "id", OPTION_HAS_VALUE, DEVICES_ID, JSON_NUMBER, NULL, "^([0-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-3][0-9][0-9][0-9]|40[0-8][0-9]|409[0-5])$");
options_add(&quigg_gt7000->options, "a", "all", OPTION_NO_VALUE, DEVICES_OPTIONAL, JSON_NUMBER, NULL, NULL);
options_add(&quigg_gt7000->options, "l", "learn", OPTION_HAS_VALUE, DEVICES_OPTIONAL, JSON_NUMBER, NULL, NULL);
options_add(&quigg_gt7000->options, "0", "readonly", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)0, "^[10]{1}$");
options_add(&quigg_gt7000->options, "0", "confirm", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)0, "^[10]{1}$");
quigg_gt7000->parseCode=&parseCode;
quigg_gt7000->createCode=&createCode;
quigg_gt7000->printHelp=&printHelp;
quigg_gt7000->validate=&validate;
}
void tfa30Init(void) {
protocol_register(&tfa30);
protocol_set_id(tfa30, "tfa30");
protocol_device_add(tfa30, "tfa30", "TFA 30.X Temp Hum Sensor");
tfa30->devtype = WEATHER;
tfa30->hwtype = RF433;
tfa30->minrawlen = MIN_RAW_LENGTH;
tfa30->maxrawlen = MAX_RAW_LENGTH;
tfa30->maxgaplen = MAX_PULSE_LENGTH*PULSE_DIV;
tfa30->mingaplen = MIN_PULSE_LENGTH*PULSE_DIV;
options_add(&tfa30->options, "t", "temperature", OPTION_HAS_VALUE, DEVICES_VALUE, JSON_NUMBER, NULL, "^[0-9]{1,3}$");
options_add(&tfa30->options, "i", "id", OPTION_HAS_VALUE, DEVICES_ID, JSON_NUMBER, NULL, "[0-9]");
options_add(&tfa30->options, "h", "humidity", OPTION_HAS_VALUE, DEVICES_VALUE, JSON_NUMBER, NULL, "^[0-9]{1,3}$");
// options_add(&tfa30->options, "0", "decimals", OPTION_HAS_VALUE, DEVICES_SETTING, JSON_NUMBER, (void *)1, "[0-9]");
options_add(&tfa30->options, "0", "temperature-decimals", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)1, "[0-9]");
options_add(&tfa30->options, "0", "humidity-decimals", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)1, "[0-9]");
options_add(&tfa30->options, "0", "humidity-offset", OPTION_HAS_VALUE, DEVICES_SETTING, JSON_NUMBER, (void *)0, "[0-9]");
options_add(&tfa30->options, "0", "temperature-offset", OPTION_HAS_VALUE, DEVICES_SETTING, JSON_NUMBER, (void *)0, "[0-9]");
options_add(&tfa30->options, "0", "show-humidity", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)1, "^[10]{1}$");
options_add(&tfa30->options, "0", "show-temperature", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)1, "^[10]{1}$");
tfa30->parseCode=&parseCode;
tfa30->checkValues=&checkValues;
tfa30->validate=&validate;
tfa30->gc=&gc;
}
void arctechSwOldInit(void) {
protocol_register(&arctech_switch_old);
protocol_set_id(arctech_switch_old, "arctech_switch_old");
protocol_device_add(arctech_switch_old, "kaku_switch_old", "Old KlikAanKlikUit Switches");
protocol_device_add(arctech_switch_old, "cogex", "Cogex Switches");
protocol_device_add(arctech_switch_old, "intertechno_old", "Old Intertechno Switches");
protocol_device_add(arctech_switch_old, "byebyestandbye", "Bye Bye Standbye Switches");
protocol_device_add(arctech_switch_old, "duwi", "Düwi Terminal Switches");
protocol_device_add(arctech_switch_old, "eurodomest", "Eurodomest Switches");
protocol_plslen_add(arctech_switch_old, 336);
protocol_plslen_add(arctech_switch_old, 326);
protocol_plslen_add(arctech_switch_old, 390);
protocol_plslen_add(arctech_switch_old, 400);
protocol_plslen_add(arctech_switch_old, 330);
arctech_switch_old->devtype = SWITCH;
arctech_switch_old->hwtype = RF433;
arctech_switch_old->pulse = 3;
arctech_switch_old->rawlen = 50;
arctech_switch_old->binlen = 12;
arctech_switch_old->lsb = 2;
options_add(&arctech_switch_old->options, 't', "on", OPTION_NO_VALUE, DEVICES_STATE, JSON_STRING, NULL, NULL);
options_add(&arctech_switch_old->options, 'f', "off", OPTION_NO_VALUE, DEVICES_STATE, JSON_STRING, NULL, NULL);
options_add(&arctech_switch_old->options, 'u', "unit", OPTION_HAS_VALUE, DEVICES_ID, JSON_NUMBER, NULL, "^([0-9]{1}|[1][0-5])$");
options_add(&arctech_switch_old->options, 'i', "id", OPTION_HAS_VALUE, DEVICES_ID, JSON_NUMBER, NULL, "^(3[012]?|[012][0-9]|[0-9]{1})$");
options_add(&arctech_switch_old->options, 0, "readonly", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)0, "^[10]{1}$");
arctech_switch_old->parseBinary=&arctechSwOldParseBinary;
arctech_switch_old->createCode=&arctechSwOldCreateCode;
arctech_switch_old->printHelp=&arctechSwOldPrintHelp;
}
void impulsInit(void) {
protocol_register(&impuls);
protocol_set_id(impuls, "impuls");
protocol_device_add(impuls, "impuls", "Impuls Switches");
protocol_device_add(impuls, "select-remote", "SelectRemote Switches");
protocol_plslen_add(impuls, 133);
impuls->devtype = SWITCH;
impuls->hwtype = RX433;
impuls->pulse = 3;
impuls->rawlen = 50;
impuls->binlen = 12;
options_add(&impuls->options, 's', "systemcode", has_value, config_id, "^(3[012]?|[012][0-9]|[0-9]{1})$");
options_add(&impuls->options, 'u', "programcode", has_value, config_id, "^(3[012]?|[012][0-9]|[0-9]{1})$");
options_add(&impuls->options, 't', "on", no_value, config_state, NULL);
options_add(&impuls->options, 'f', "off", no_value, config_state, NULL);
protocol_setting_add_string(impuls, "states", "on,off");
protocol_setting_add_number(impuls, "readonly", 0);
impuls->parseCode=&impulsParseCode;
impuls->createCode=&impulsCreateCode;
impuls->printHelp=&impulsPrintHelp;
}
void arctechDimInit(void) {
protocol_register(&arctech_dimmer);
protocol_set_id(arctech_dimmer, "arctech_dimmers");
protocol_device_add(arctech_dimmer, "kaku_dimmer", "KlikAanKlikUit Dimmers");
protocol_conflict_add(arctech_dimmer, "arctech_contact");
protocol_plslen_add(arctech_dimmer, 300);
arctech_dimmer->devtype = DIMMER;
arctech_dimmer->hwtype = RF433;
arctech_dimmer->pulse = 5;
arctech_dimmer->rawlen = 148;
arctech_dimmer->lsb = 3;
options_add(&arctech_dimmer->options, 'd', "dimlevel", has_value, config_value, "^([0-9]{1}|[1][0-5])$");
options_add(&arctech_dimmer->options, 'a', "all", no_value, 0, NULL);
options_add(&arctech_dimmer->options, 'u', "unit", has_value, config_id, "^([0-9]{1}|[1][0-5])$");
options_add(&arctech_dimmer->options, 'i', "id", has_value, config_id, "^([0-9]{1,7}|[1-5][0-9]{7}|6([0-6][0-9]{6}|7(0[0-9]{5}|10([0-7][0-9]{3}|8([0-7][0-9]{2}|8([0-5][0-9]|6[0-3]))))))$");
options_add(&arctech_dimmer->options, 't', "on", no_value, config_state, NULL);
options_add(&arctech_dimmer->options, 'f', "off", no_value, config_state, NULL);
protocol_setting_add_number(arctech_dimmer, "min", 0);
protocol_setting_add_number(arctech_dimmer, "max", 15);
protocol_setting_add_string(arctech_dimmer, "states", "on,off");
protocol_setting_add_number(arctech_dimmer, "readonly", 0);
arctech_dimmer->parseBinary=&arctechDimParseBinary;
arctech_dimmer->createCode=&arctechDimCreateCode;
arctech_dimmer->printHelp=&arctechDimPrintHelp;
arctech_dimmer->checkValues=&arctechDimCheckValues;
}
void clarusSwInit(void) {
protocol_register(&clarus_switch);
protocol_set_id(clarus_switch, "clarus_switch");
protocol_device_add(clarus_switch, "clarus_switch", "Clarus Switches");
protocol_conflict_add(clarus_switch, "rev_switch");
protocol_plslen_add(clarus_switch, 190);
protocol_plslen_add(clarus_switch, 180);
clarus_switch->devtype = SWITCH;
clarus_switch->hwtype = RF433;
clarus_switch->pulse = 3;
clarus_switch->rawlen = 50;
clarus_switch->binlen = 12;
options_add(&clarus_switch->options, 't', "on", OPTION_NO_VALUE, CONFIG_STATE, JSON_STRING, NULL, NULL);
options_add(&clarus_switch->options, 'f', "off", OPTION_NO_VALUE, CONFIG_STATE, JSON_STRING, NULL, NULL);
options_add(&clarus_switch->options, 'u', "unit", OPTION_HAS_VALUE, CONFIG_ID, JSON_NUMBER, NULL, "^([0-9]|[1-5][0-9]|6[0-3])$");
options_add(&clarus_switch->options, 'i', "id", OPTION_HAS_VALUE, CONFIG_ID, JSON_STRING, NULL, "^[ABCDEF](3[012]?|[012][0-9]|[0-9]{1})$");
options_add(&clarus_switch->options, 0, "gui-readonly", OPTION_HAS_VALUE, CONFIG_SETTING, JSON_NUMBER, (void *)0, "^[10]{1}$");
clarus_switch->parseCode=&clarusSwParseCode;
clarus_switch->createCode=&clarusSwCreateCode;
clarus_switch->printHelp=&clarusSwPrintHelp;
}
void tfaInit(void) {
protocol_register(&tfa);
protocol_set_id(tfa, "tfa");
protocol_device_add(tfa, "tfa", "TFA weather stations");
protocol_device_add(tfa, "conrad_weather", "Conrad Weather Stations");
tfa->devtype = WEATHER;
tfa->hwtype = RF433;
tfa->maxgaplen = MAX_PULSE_LENGTH*PULSE_DIV;
tfa->mingaplen = MIN_PULSE_LENGTH*PULSE_DIV;
tfa->minrawlen = 86;
tfa->maxrawlen = 86;
options_add(&tfa->options, 't', "temperature", OPTION_HAS_VALUE, DEVICES_VALUE, JSON_NUMBER, NULL, "^[0-9]{1,3}$");
options_add(&tfa->options, 'i', "id", OPTION_HAS_VALUE, DEVICES_ID, JSON_NUMBER, NULL, "[0-9]");
options_add(&tfa->options, 'c', "channel", OPTION_HAS_VALUE, DEVICES_ID, JSON_NUMBER, NULL, "[0-9]");
options_add(&tfa->options, 'h', "humidity", OPTION_HAS_VALUE, DEVICES_VALUE, JSON_NUMBER, NULL, "[0-9]");
options_add(&tfa->options, 'b', "battery", OPTION_HAS_VALUE, DEVICES_VALUE, JSON_NUMBER, NULL, "^[01]$");
// options_add(&tfa->options, 0, "decimals", OPTION_HAS_VALUE, DEVICES_SETTING, JSON_NUMBER, (void *)2, "[0-9]");
options_add(&tfa->options, 0, "temperature-offset", OPTION_HAS_VALUE, DEVICES_SETTING, JSON_NUMBER, (void *)0, "[0-9]");
options_add(&tfa->options, 0, "humidity-offset", OPTION_HAS_VALUE, DEVICES_SETTING, JSON_NUMBER, (void *)0, "[0-9]");
options_add(&tfa->options, 0, "temperature-decimals", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)2, "[0-9]");
options_add(&tfa->options, 0, "humidity-decimals", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)2, "[0-9]");
options_add(&tfa->options, 0, "show-humidity", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)1, "^[10]{1}$");
options_add(&tfa->options, 0, "show-temperature", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)1, "^[10]{1}$");
options_add(&tfa->options, 0, "show-battery", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)1, "^[10]{1}$");
tfa->parseCode=&parseCode;
tfa->checkValues=&checkValues;
tfa->validate=&validate;
tfa->gc=&gc;
}
void homeEasyOldInit(void) {
protocol_register(&home_easy_old);
protocol_set_id(home_easy_old, "home_easy_old");
protocol_device_add(home_easy_old, "home_easy_old", "Old Home Easy Switches");
protocol_plslen_add(home_easy_old, 289);
home_easy_old->devtype = SWITCH;
home_easy_old->hwtype = RF433;
home_easy_old->pulse = 3;
home_easy_old->rawlen = 50;
home_easy_old->binlen = 12;
home_easy_old->lsb = 3;
options_add(&home_easy_old->options, 's', "systemcode", has_value, config_id, "^(3[012]?|[012][0-9]|[0-9]{1})$");
options_add(&home_easy_old->options, 'u', "unitcode", has_value, config_id, "^(3[012]?|[012][0-9]|[0-9]{1})$");
options_add(&home_easy_old->options, 'a', "all", no_value, config_state, NULL);
options_add(&home_easy_old->options, 't', "on", no_value, config_state, NULL);
options_add(&home_easy_old->options, 'f', "off", no_value, config_state, NULL);
protocol_setting_add_string(home_easy_old, "states", "on,off");
protocol_setting_add_number(home_easy_old, "readonly", 0);
home_easy_old->parseBinary=&homeEasyOldParseBinary;
home_easy_old->createCode=&homeEasyOldCreateCode;
home_easy_old->printHelp=&homeEasyOldPrintHelp;
}
void elro800SwitchInit(void) {
protocol_register(&elro_800_switch);
protocol_set_id(elro_800_switch, "elro_800_switch");
protocol_device_add(elro_800_switch, "elro_800_switch", "Elro 800 series Switches");
protocol_device_add(elro_800_switch, "brennenstuhl", "Brennenstuhl Comfort");
protocol_device_add(elro_800_switch, "maxitronic", "Maxi-Tronic FUNK-LIGHT switches");
elro_800_switch->devtype = SWITCH;
elro_800_switch->hwtype = RF433;
elro_800_switch->minrawlen = RAW_LENGTH;
elro_800_switch->maxrawlen = RAW_LENGTH;
elro_800_switch->maxgaplen = MAX_PULSE_LENGTH*PULSE_DIV;
elro_800_switch->mingaplen = MIN_PULSE_LENGTH*PULSE_DIV;
options_add(&elro_800_switch->options, "s", "systemcode", OPTION_HAS_VALUE, DEVICES_ID, JSON_NUMBER, NULL, "^102[0-3]|10[01][0-9]|[0-9]{1,3}$");
options_add(&elro_800_switch->options, "u", "unitcode", OPTION_HAS_VALUE, DEVICES_ID, JSON_NUMBER, NULL, "^(3[012]?|[012][0-9]|[0-9]{1})$");
options_add(&elro_800_switch->options, "t", "on", OPTION_NO_VALUE, DEVICES_STATE, JSON_STRING, NULL, NULL);
options_add(&elro_800_switch->options, "f", "off", OPTION_NO_VALUE, DEVICES_STATE, JSON_STRING, NULL, NULL);
options_add(&elro_800_switch->options, "0", "readonly", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)0, "^[10]{1}$");
options_add(&elro_800_switch->options, "0", "confirm", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)0, "^[10]{1}$");
elro_800_switch->parseCode=&parseCode;
elro_800_switch->createCode=&createCode;
elro_800_switch->printHelp=&printHelp;
elro_800_switch->validate=&validate;
}
void ds18s20Init(void) {
pthread_mutexattr_init(&attr);
pthread_mutexattr_settype(&attr, PTHREAD_MUTEX_RECURSIVE);
pthread_mutex_init(&lock, &attr);
protocol_register(&ds18s20);
protocol_set_id(ds18s20, "ds18s20");
protocol_device_add(ds18s20, "ds18s20", "1-wire Temperature Sensor");
ds18s20->devtype = WEATHER;
ds18s20->hwtype = SENSOR;
options_add(&ds18s20->options, 't', "temperature", OPTION_HAS_VALUE, DEVICES_VALUE, JSON_NUMBER, NULL, "^[0-9]{1,5}$");
options_add(&ds18s20->options, 'i', "id", OPTION_HAS_VALUE, DEVICES_ID, JSON_STRING, NULL, "^[a-z0-9]{12}$");
// options_add(&ds18s20->options, 0, "decimals", OPTION_HAS_VALUE, DEVICES_SETTING, JSON_NUMBER, (void *)3, "[0-9]");
options_add(&ds18s20->options, 0, "temperature-offset", OPTION_HAS_VALUE, DEVICES_SETTING, JSON_NUMBER, (void *)0, "[0-9]");
options_add(&ds18s20->options, 0, "temperature-decimals", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)3, "[0-9]");
options_add(&ds18s20->options, 0, "show-temperature", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)1, "^[10]{1}$");
options_add(&ds18s20->options, 0, "poll-interval", OPTION_HAS_VALUE, DEVICES_SETTING, JSON_NUMBER, (void *)10, "[0-9]");
memset(source_path, '\0', 21);
strcpy(source_path, "/sys/bus/w1/devices/");
ds18s20->initDev=&initDev;
ds18s20->threadGC=&theadGC;
}
void arctechSrInit(void) {
protocol_register(&arctech_screen);
protocol_set_id(arctech_screen, "arctech_screens");
protocol_device_add(arctech_screen, "kaku_screen", "KlikAanKlikUit Screens");
protocol_plslen_add(arctech_screen, 251);
protocol_plslen_add(arctech_screen, 294);
protocol_plslen_add(arctech_screen, 303);
arctech_screen->devtype = SCREEN;
arctech_screen->hwtype = RF433;
arctech_screen->pulse = 5;
arctech_screen->rawlen = 132;
arctech_screen->lsb = 3;
options_add(&arctech_screen->options, 't', "up", OPTION_NO_VALUE, CONFIG_STATE, JSON_STRING, NULL, NULL);
options_add(&arctech_screen->options, 'f', "down", OPTION_NO_VALUE, CONFIG_STATE, JSON_STRING, NULL, NULL);
options_add(&arctech_screen->options, 'u', "unit", OPTION_HAS_VALUE, CONFIG_ID, JSON_NUMBER, NULL, "^([0-9]{1}|[1][0-5])$");
options_add(&arctech_screen->options, 'i', "id", OPTION_HAS_VALUE, CONFIG_ID, JSON_NUMBER, NULL, "^([0-9]{1,7}|[1-5][0-9]{7}|6([0-6][0-9]{6}|7(0[0-9]{5}|10([0-7][0-9]{3}|8([0-7][0-9]{2}|8([0-5][0-9]|6[0-3]))))))$");
options_add(&arctech_screen->options, 'a', "all", OPTION_OPT_VALUE, CONFIG_OPTIONAL, JSON_NUMBER, NULL, NULL);
options_add(&arctech_screen->options, 0, "gui-readonly", OPTION_HAS_VALUE, CONFIG_SETTING, JSON_NUMBER, (void *)0, "^[10]{1}$");
arctech_screen->parseBinary=&arctechSrParseBinary;
arctech_screen->createCode=&arctechSrCreateCode;
arctech_screen->printHelp=&arctechSrPrintHelp;
}
void dht22Init(void) {
pthread_mutexattr_init(&dht22attr);
pthread_mutexattr_settype(&dht22attr, PTHREAD_MUTEX_RECURSIVE);
pthread_mutex_init(&dht22lock, &dht22attr);
protocol_register(&dht22);
protocol_set_id(dht22, "dht22");
protocol_device_add(dht22, "dht22", "1-wire Temperature and Humidity Sensor");
protocol_device_add(dht22, "am2302", "1-wire Temperature and Humidity Sensor");
dht22->devtype = WEATHER;
dht22->hwtype = SENSOR;
options_add(&dht22->options, 't', "temperature", OPTION_HAS_VALUE, DEVICES_VALUE, JSON_NUMBER, NULL, "^[0-9]{1,3}$");
options_add(&dht22->options, 'h', "humidity", OPTION_HAS_VALUE, DEVICES_VALUE, JSON_NUMBER, NULL, "^[0-9]{1,3}$");
options_add(&dht22->options, 'g', "gpio", OPTION_HAS_VALUE, DEVICES_ID, JSON_NUMBER, NULL, "^([0-9]{1}|1[0-9]|20)$");
// options_add(&dht22->options, 0, "decimals", OPTION_HAS_VALUE, DEVICES_SETTING, JSON_NUMBER, (void *)1, "[0-9]");
options_add(&dht22->options, 0, "temperature-offset", OPTION_HAS_VALUE, DEVICES_SETTING, JSON_NUMBER, (void *)0, "[0-9]");
options_add(&dht22->options, 0, "humidity-offset", OPTION_HAS_VALUE, DEVICES_SETTING, JSON_NUMBER, (void *)0, "[0-9]");
options_add(&dht22->options, 0, "decimals", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)1, "[0-9]");
options_add(&dht22->options, 0, "show-temperature", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)1, "^[10]{1}$");
options_add(&dht22->options, 0, "show-humidity", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)1, "^[10]{1}$");
options_add(&dht22->options, 0, "poll-interval", OPTION_HAS_VALUE, DEVICES_SETTING, JSON_NUMBER, (void *)10, "[0-9]");
dht22->initDev=&dht22InitDev;
dht22->threadGC=&dht22ThreadGC;
}
void impulsInit(void) {
protocol_register(&impuls);
protocol_set_id(impuls, "impuls");
protocol_device_add(impuls, "impuls", "Impuls Switches");
impuls->devtype = SWITCH;
impuls->hwtype = RF433;
impuls->minrawlen = RAW_LENGTH;
impuls->maxrawlen = RAW_LENGTH;
impuls->maxgaplen = MAX_PULSE_LENGTH*PULSE_DIV;
impuls->mingaplen = MIN_PULSE_LENGTH*PULSE_DIV;
options_add(&impuls->options, 's', "systemcode", OPTION_HAS_VALUE, DEVICES_ID, JSON_NUMBER, NULL, "^(3[012]?|[012][0-9]|[0-9]{1})$");
options_add(&impuls->options, 'u', "programcode", OPTION_HAS_VALUE, DEVICES_ID, JSON_NUMBER, NULL, "^(3[012]?|[012][0-9]|[0-9]{1})$");
options_add(&impuls->options, 't', "on", OPTION_NO_VALUE, DEVICES_STATE, JSON_STRING, NULL, NULL);
options_add(&impuls->options, 'f', "off", OPTION_NO_VALUE, DEVICES_STATE, JSON_STRING, NULL, NULL);
options_add(&impuls->options, 0, "readonly", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)0, "^[10]{1}$");
options_add(&impuls->options, 0, "confirm", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)0, "^[10]{1}$");
impuls->parseCode=&parseCode;
impuls->createCode=&createCode;
impuls->printHelp=&printHelp;
impuls->validate=&validate;
}
void arctechDimInit(void) {
protocol_register(&arctech_dimmer);
arctech_dimmer->id = malloc(18);
strcpy(arctech_dimmer->id, "archtech_dimmers");
protocol_add_device(arctech_dimmer, "kaku_dimmer", "KlikAanKlikUit Dimmers");
arctech_dimmer->type = DIMMER;
arctech_dimmer->header = 10;
arctech_dimmer->pulse = 5;
arctech_dimmer->footer = 38;
arctech_dimmer->rawLength = 148;
arctech_dimmer->lsb = 3;
arctech_dimmer->bit = 0;
arctech_dimmer->recording = 0;
options_add(&arctech_dimmer->options, 'd', "dimlevel", has_value, config_value, "^([0-9]{1}|[1][0-6])$");
options_add(&arctech_dimmer->options, 'a', "all", no_value, 0, NULL);
options_add(&arctech_dimmer->options, 'u', "unit", has_value, config_id, "^([0-9]{1}|[1][0-5])$");
options_add(&arctech_dimmer->options, 'i', "id", has_value, config_id, "^([0-9]{1,7}|[1-5][0-9]{7}|6([0-6][0-9]{6}|7(0[0-9]{5}|10([0-7][0-9]{3}|8([0-7][0-9]{2}|8([0-5][0-9]|6[0-3]))))))$");
options_add(&arctech_dimmer->options, 't', "on", no_value, config_state, NULL);
options_add(&arctech_dimmer->options, 'f', "off", no_value, config_state, NULL);
arctech_dimmer->parseBinary=&arctechDimParseBinary;
arctech_dimmer->createCode=&arctechDimCreateCode;
arctech_dimmer->printHelp=&arctechDimPrintHelp;
}
void programInit(void) {
protocol_register(&program);
protocol_set_id(program, "program");
protocol_device_add(program, "program", "Start / Stop / State of a program");
program->devtype = PENDINGSW;
program->hwtype = API;
program->multipleId = 0;
options_add(&program->options, 'n', "name", OPTION_HAS_VALUE, CONFIG_ID, JSON_STRING, NULL, NULL);
options_add(&program->options, 'x', "start-command", OPTION_HAS_VALUE, CONFIG_VALUE, JSON_STRING, NULL, NULL);
options_add(&program->options, 'y', "stop-command", OPTION_HAS_VALUE, CONFIG_VALUE, JSON_STRING, NULL, NULL);
options_add(&program->options, 'p', "program", OPTION_HAS_VALUE, CONFIG_VALUE, JSON_STRING, NULL, NULL);
options_add(&program->options, 'i', "pid", OPTION_HAS_VALUE, CONFIG_VALUE, JSON_NUMBER, NULL, NULL);
options_add(&program->options, 'a', "arguments", OPTION_HAS_VALUE, CONFIG_VALUE, JSON_STRING, NULL, NULL);
options_add(&program->options, 't', "running", OPTION_NO_VALUE, CONFIG_STATE, JSON_STRING, NULL, NULL);
options_add(&program->options, 'd', "pending", OPTION_NO_VALUE, CONFIG_STATE, JSON_STRING, NULL, NULL);
options_add(&program->options, 'f', "stopped", OPTION_NO_VALUE, CONFIG_STATE, JSON_STRING, NULL, NULL);
options_add(&program->options, 0, "gui-readonly", OPTION_HAS_VALUE, CONFIG_SETTING, JSON_NUMBER, (void *)0, "^[10]{1}$");
options_add(&program->options, 0, "poll-interval", OPTION_HAS_VALUE, CONFIG_SETTING, JSON_NUMBER, (void *)1, "[0-9]");
program->createCode=&programCreateCode;
program->printHelp=&programPrintHelp;
program->initDev=&programInitDev;
program->threadGC=&programThreadGC;
}
void rc101Init(void) {
protocol_register(&rc101);
protocol_set_id(rc101, "rc101");
protocol_device_add(rc101, "rc101", "rc101 Switches");
protocol_device_add(rc101, "rc102", "rc102 Switches");
protocol_plslen_add(rc101, 241);
rc101->devtype = SWITCH;
rc101->hwtype = RF433;
rc101->pulse = 3;
rc101->rawlen = 66;
rc101->binlen = 16;
options_add(&rc101->options, 'i', "id", OPTION_HAS_VALUE, DEVICES_ID, JSON_NUMBER, NULL, "^([0-4])$");
options_add(&rc101->options, 'u', "unit", OPTION_HAS_VALUE, DEVICES_ID, JSON_NUMBER, NULL, "^([0-4])$");
options_add(&rc101->options, 't', "on", OPTION_NO_VALUE, DEVICES_STATE, JSON_STRING, NULL, NULL);
options_add(&rc101->options, 'f', "off", OPTION_NO_VALUE, DEVICES_STATE, JSON_STRING, NULL, NULL);
options_add(&rc101->options, 'a', "all", OPTION_OPT_VALUE, DEVICES_OPTIONAL, JSON_NUMBER, NULL, NULL);
options_add(&rc101->options, 0, "readonly", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)0, "^[10]{1}$");
rc101->parseCode=&rc101ParseCode;
rc101->createCode=&rc101CreateCode;
rc101->printHelp=&rc101PrintHelp;
}
void rsl366Init(void) {
protocol_register(&rsl366);
protocol_set_id(rsl366, "rsl366");
protocol_device_add(rsl366, "rsl366", "RSL366 Switches");
protocol_device_add(rsl366, "promax", "Pro MAX Switches");
rsl366->devtype = SWITCH;
rsl366->hwtype = RF433;
rsl366->minrawlen = RAW_LENGTH;
rsl366->maxrawlen = RAW_LENGTH;
rsl366->maxgaplen = MAX_PULSE_LENGTH*PULSE_DIV;
rsl366->mingaplen = MIN_PULSE_LENGTH*PULSE_DIV;
options_add(&rsl366->options, 's', "systemcode", OPTION_HAS_VALUE, DEVICES_ID, JSON_NUMBER, NULL, "^([1234]{1})$");
options_add(&rsl366->options, 'u', "programcode", OPTION_HAS_VALUE, DEVICES_ID, JSON_NUMBER, NULL, "^([1234]{1})$");
options_add(&rsl366->options, 't', "on", OPTION_NO_VALUE, DEVICES_STATE, JSON_STRING, NULL, NULL);
options_add(&rsl366->options, 'f', "off", OPTION_NO_VALUE, DEVICES_STATE, JSON_STRING, NULL, NULL);
options_add(&rsl366->options, 0, "readonly", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)0, "^[10]{1}$");
options_add(&rsl366->options, 0, "confirm", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)0, "^[10]{1}$");
rsl366->parseCode=&parseCode;
rsl366->createCode=&createCode;
rsl366->printHelp=&printHelp;
rsl366->validate=&validate;
}
void sartanoInit(void) {
strcpy(sartano.id, "sartano");
protocol_add_device(&sartano, "elro", "Elro Switches");
protocol_add_conflict(&sartano, "arctech_old");
protocol_add_conflict(&sartano, "impuls");
sartano.type = SWITCH;
sartano.pulse = 4;
sartano.footer = 38;
sartano.rawLength = 50;
sartano.binLength = 12;
sartano.message = malloc(sizeof(JsonNode));
sartano.bit = 0;
sartano.recording = 0;
options_add(&sartano.options, 't', "on", no_value, config_state, NULL);
options_add(&sartano.options, 'f', "off", no_value, config_state, NULL);
options_add(&sartano.options, 'u', "unit", has_value, config_id, "^(3[012]?|[012][0-9]|[0-9]{1})$");
options_add(&sartano.options, 'i', "id", has_value, config_id, "^(3[012]?|[012][0-9]|[0-9]{1})$");
sartano.parseBinary=&sartanoParseBinary;
sartano.createCode=&sartanoCreateCode;
sartano.printHelp=&sartanoPrintHelp;
protocol_register(&sartano);
}
void arctechSrOldInit(void) {
protocol_register(&arctech_screen_old);
protocol_set_id(arctech_screen_old, "arctech_screens_old");
protocol_device_add(arctech_screen_old, "kaku_screen_old", "Old KlikAanKlikUit Screens");
protocol_conflict_add(arctech_screen_old, "arctech_switches_old");
protocol_plslen_add(arctech_screen_old, 336);
arctech_screen_old->devtype = SCREEN;
arctech_screen_old->hwtype = RF433;
arctech_screen_old->pulse = 3;
arctech_screen_old->rawlen = 50;
arctech_screen_old->binlen = 12;
arctech_screen_old->lsb = 2;
options_add(&arctech_screen_old->options, 't', "up", OPTION_NO_VALUE, CONFIG_STATE, JSON_STRING, NULL, NULL);
options_add(&arctech_screen_old->options, 'f', "down", OPTION_NO_VALUE, CONFIG_STATE, JSON_STRING, NULL, NULL);
options_add(&arctech_screen_old->options, 'u', "unit", OPTION_HAS_VALUE, CONFIG_ID, JSON_NUMBER, NULL, "^([0-9]{1}|[1][0-5])$");
options_add(&arctech_screen_old->options, 'i', "id", OPTION_HAS_VALUE, CONFIG_ID, JSON_NUMBER, NULL, "^(3[012]?|[012][0-9]|[0-9]{1})$");
options_add(&arctech_screen_old->options, 0, "gui-readonly", OPTION_HAS_VALUE, CONFIG_SETTING, JSON_NUMBER, (void *)0, "^[10]{1}$");
arctech_screen_old->parseBinary=&arctechSrOldParseBinary;
arctech_screen_old->createCode=&arctechSrOldCreateCode;
arctech_screen_old->printHelp=&arctechSrOldPrintHelp;
}
void arctechSwInit(void) {
protocol_register(&arctech_switch);
arctech_switch->id = malloc(18);
strcpy(arctech_switch->id, "archtech_switches");
protocol_add_device(arctech_switch, "kaku_switch", "KlikAanKlikUit Switches");
protocol_add_device(arctech_switch, "dio_switch", "D-IO (Chacon) Switches");
protocol_add_device(arctech_switch, "nexa_switch", "Nexa Switches");
protocol_add_device(arctech_switch, "coco_switch", "CoCo Technologies Switches");
protocol_add_device(arctech_switch, "intertechno_switch", "Intertechno Switches");
protocol_add_conflict(arctech_switch, "archtech_dimmers");
arctech_switch->type = SWITCH;
arctech_switch->header = 9;
arctech_switch->pulse = 5;
arctech_switch->footer = 35;
arctech_switch->rawLength = 132;
arctech_switch->lsb = 3;
arctech_switch->bit = 0;
arctech_switch->recording = 0;
options_add(&arctech_switch->options, 'a', "all", no_value, 0, NULL);
options_add(&arctech_switch->options, 't', "on", no_value, config_state, NULL);
options_add(&arctech_switch->options, 'f', "off", no_value, config_state, NULL);
options_add(&arctech_switch->options, 'u', "unit", has_value, config_id, "^([0-9]{1}|[1][0-5])$");
options_add(&arctech_switch->options, 'i', "id", has_value, config_id, "^([0-9]{1,7}|[1-5][0-9]{7}|6([0-6][0-9]{6}|7(0[0-9]{5}|10([0-7][0-9]{3}|8([0-7][0-9]{2}|8([0-5][0-9]|6[0-3]))))))$");
arctech_switch->parseBinary=&arctechSwParseBinary;
arctech_switch->createCode=&arctechSwCreateCode;
arctech_switch->printHelp=&arctechSwPrintHelp;
}
void quiggGT7000Init(void) {
protocol_register(&quigg_gt7000);
protocol_set_id(quigg_gt7000, "quigg_gt7000");
protocol_device_add(quigg_gt7000, "quigg_gt7000", "Quigg GT-7000 Switches");
protocol_plslen_add(quigg_gt7000, (int)PULSE_QUIGG_FOOTER/PULSE_DIV); // SHORT: GT-FSI-04a range: 620... 960
quigg_gt7000->devtype = SWITCH;
quigg_gt7000->hwtype = RF433;
quigg_gt7000->pulse = 2; // LONG=QUIGG_PULSE_HIGH*SHORT
quigg_gt7000->lsb = 0;
// 42 SHORT (>600)[0]; 20 times 0-(SHORT-LONG) or 1-(LONG-SHORT) [1-2 .. 39-40];
// footer PULSE_DIV*SHORT (>6000) [41]
quigg_gt7000->rawlen = 42;
// 20 sys-id[0 .. 11]; unit[12,13], unit_all[14], on/off[15], dimm[16],
// null[17], var[18]; Parity[19]
quigg_gt7000->binlen = 20;
options_add(&quigg_gt7000->options, 't', "on", OPTION_NO_VALUE, DEVICES_STATE, JSON_STRING, NULL, NULL);
options_add(&quigg_gt7000->options, 'f', "off", OPTION_NO_VALUE, DEVICES_STATE, JSON_STRING, NULL, NULL);
options_add(&quigg_gt7000->options, 'u', "unit", OPTION_HAS_VALUE, DEVICES_ID, JSON_NUMBER, NULL, "^([0-3])$");
options_add(&quigg_gt7000->options, 'i', "id", OPTION_HAS_VALUE, DEVICES_ID, JSON_NUMBER, NULL, "^([1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-3][0-9][0-9][0-9]|40[0-8][0-9]|409[0-5])$");
options_add(&quigg_gt7000->options, 'a', "all", OPTION_NO_VALUE, DEVICES_SETTING, JSON_NUMBER, NULL, NULL);
options_add(&quigg_gt7000->options, 0, "readonly", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)0, "^[10]{1}$");
quigg_gt7000->parseCode=&quiggGT7000ParseCode;
quigg_gt7000->createCode=&quiggGT7000CreateCode;
quigg_gt7000->printHelp=&quiggGT7000PrintHelp;
}
void arctechSwInit(void) {
protocol_register(&arctech_switch);
protocol_set_id(arctech_switch, "archtech_switches");
protocol_device_add(arctech_switch, "kaku_switch", "KlikAanKlikUit Switches");
protocol_device_add(arctech_switch, "dio_switch", "D-IO (Chacon) Switches");
protocol_device_add(arctech_switch, "nexa_switch", "Nexa Switches");
protocol_device_add(arctech_switch, "coco_switch", "CoCo Technologies Switches");
protocol_device_add(arctech_switch, "intertechno_switch", "Intertechno Switches");
protocol_conflict_add(arctech_switch, "archtech_screens");
protocol_plslen_add(arctech_switch, 303);
protocol_plslen_add(arctech_switch, 251);
arctech_switch->devtype = SWITCH;
arctech_switch->hwtype = RX433;
arctech_switch->pulse = 5;
arctech_switch->rawlen = 132;
arctech_switch->lsb = 3;
options_add(&arctech_switch->options, 'a', "all", no_value, 0, NULL);
options_add(&arctech_switch->options, 't', "on", no_value, config_state, NULL);
options_add(&arctech_switch->options, 'f', "off", no_value, config_state, NULL);
options_add(&arctech_switch->options, 'u', "unit", has_value, config_id, "^([0-9]{1}|[1][0-5])$");
options_add(&arctech_switch->options, 'i', "id", has_value, config_id, "^([0-9]{1,7}|[1-5][0-9]{7}|6([0-6][0-9]{6}|7(0[0-9]{5}|10([0-7][0-9]{3}|8([0-7][0-9]{2}|8([0-5][0-9]|6[0-3]))))))$");
protocol_setting_add_string(arctech_switch, "states", "on,off");
protocol_setting_add_number(arctech_switch, "readonly", 0);
arctech_switch->parseBinary=&arctechSwParseBinary;
arctech_switch->createCode=&arctechSwCreateCode;
arctech_switch->printHelp=&arctechSwPrintHelp;
}
void arctechDimmerInit(void) {
protocol_register(&arctech_dimmer);
protocol_set_id(arctech_dimmer, "arctech_dimmer");
protocol_device_add(arctech_dimmer, "kaku_dimmer", "KlikAanKlikUit Dimmers");
arctech_dimmer->devtype = DIMMER;
arctech_dimmer->hwtype = RF433;
arctech_dimmer->txrpt = NORMAL_REPEATS;
arctech_dimmer->minrawlen = RAW_LENGTH;
arctech_dimmer->maxrawlen = RAW_LENGTH;
arctech_dimmer->maxgaplen = MAX_PULSE_LENGTH*PULSE_DIV;
arctech_dimmer->mingaplen = MIN_PULSE_LENGTH*PULSE_DIV;
options_add(&arctech_dimmer->options, 'd', "dimlevel", OPTION_HAS_VALUE, DEVICES_VALUE, JSON_NUMBER, NULL, "^([0-9]{1}|[1][0-5])$");
options_add(&arctech_dimmer->options, 'u', "unit", OPTION_HAS_VALUE, DEVICES_ID, JSON_NUMBER, NULL, "^([0-9]{1}|[1][0-5])$");
options_add(&arctech_dimmer->options, 'i', "id", OPTION_HAS_VALUE, DEVICES_ID, JSON_NUMBER, NULL, "^([0-9]{1,7}|[1-5][0-9]{7}|6([0-6][0-9]{6}|7(0[0-9]{5}|10([0-7][0-9]{3}|8([0-7][0-9]{2}|8([0-5][0-9]|6[0-3]))))))$");
options_add(&arctech_dimmer->options, 't', "on", OPTION_NO_VALUE, DEVICES_STATE, JSON_STRING, NULL, NULL);
options_add(&arctech_dimmer->options, 'f', "off", OPTION_NO_VALUE, DEVICES_STATE, JSON_STRING, NULL, NULL);
options_add(&arctech_dimmer->options, 'a', "all", OPTION_OPT_VALUE, DEVICES_OPTIONAL, JSON_NUMBER, NULL, NULL);
options_add(&arctech_dimmer->options, 'l', "learn", OPTION_NO_VALUE, DEVICES_OPTIONAL, JSON_NUMBER, NULL, NULL);
options_add(&arctech_dimmer->options, 0, "dimlevel-minimum", OPTION_HAS_VALUE, DEVICES_SETTING, JSON_NUMBER, (void *)0, "^([0-9]{1}|[1][0-5])$");
options_add(&arctech_dimmer->options, 0, "dimlevel-maximum", OPTION_HAS_VALUE, DEVICES_SETTING, JSON_NUMBER, (void *)15, "^([0-9]{1}|[1][0-5])$");
options_add(&arctech_dimmer->options, 0, "readonly", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)0, "^[10]{1}$");
options_add(&arctech_dimmer->options, 0, "confirm", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)0, "^[10]{1}$");
arctech_dimmer->parseCode=&parseCode;
arctech_dimmer->createCode=&createCode;
arctech_dimmer->printHelp=&printHelp;
arctech_dimmer->checkValues=&checkValues;
arctech_dimmer->validate=&validate;
}
void arctechScreenOldInit(void) {
protocol_register(&arctech_screen_old);
protocol_set_id(arctech_screen_old, "arctech_screen_old");
protocol_device_add(arctech_screen_old, "kaku_screen_old", "Old KlikAanKlikUit Screens");
arctech_screen_old->devtype = SCREEN;
arctech_screen_old->hwtype = RF433;
arctech_screen_old->minrawlen = RAW_LENGTH;
arctech_screen_old->maxrawlen = RAW_LENGTH;
arctech_screen_old->maxgaplen = MAX_PULSE_LENGTH*PULSE_DIV;
arctech_screen_old->mingaplen = MIN_PULSE_LENGTH*PULSE_DIV;
options_add(&arctech_screen_old->options, 't', "up", OPTION_NO_VALUE, DEVICES_STATE, JSON_STRING, NULL, NULL);
options_add(&arctech_screen_old->options, 'f', "down", OPTION_NO_VALUE, DEVICES_STATE, JSON_STRING, NULL, NULL);
options_add(&arctech_screen_old->options, 'u', "unit", OPTION_HAS_VALUE, DEVICES_ID, JSON_NUMBER, NULL, "^([0-9]{1}|[1][0-5])$");
options_add(&arctech_screen_old->options, 'i', "id", OPTION_HAS_VALUE, DEVICES_ID, JSON_NUMBER, NULL, "^(3[012]?|[012][0-9]|[0-9]{1})$");
options_add(&arctech_screen_old->options, 0, "readonly", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)0, "^[10]{1}$");
options_add(&arctech_screen_old->options, 0, "confirm", OPTION_HAS_VALUE, GUI_SETTING, JSON_NUMBER, (void *)0, "^[10]{1}$");
arctech_screen_old->parseCode=&parseCode;
arctech_screen_old->createCode=&createCode;
arctech_screen_old->printHelp=&printHelp;
arctech_screen_old->validate=&validate;
}
void arctechSwInit(void) {
protocol_register(&arctech_switch);
protocol_set_id(arctech_switch, "arctech_switches");
protocol_device_add(arctech_switch, "kaku_switch", "KlikAanKlikUit Switches");
protocol_device_add(arctech_switch, "dio_switch", "D-IO Switches");
protocol_device_add(arctech_switch, "nexa_switch", "Nexa Switches");
protocol_device_add(arctech_switch, "coco_switch", "CoCo Technologies Switches");
protocol_device_add(arctech_switch, "intertechno_switch", "Intertechno Switches");
protocol_conflict_add(arctech_switch, "arctech_screens");
protocol_conflict_add(arctech_switch, "arctech_contact");
protocol_plslen_add(arctech_switch, 315);
protocol_plslen_add(arctech_switch, 303);
protocol_plslen_add(arctech_switch, 251);
arctech_switch->devtype = SWITCH;
arctech_switch->hwtype = RF433;
arctech_switch->pulse = 5;
arctech_switch->rawlen = 132;
arctech_switch->lsb = 3;
options_add(&arctech_switch->options, 't', "on", OPTION_NO_VALUE, CONFIG_STATE, JSON_STRING, NULL, NULL);
options_add(&arctech_switch->options, 'f', "off", OPTION_NO_VALUE, CONFIG_STATE, JSON_STRING, NULL, NULL);
options_add(&arctech_switch->options, 'u', "unit", OPTION_HAS_VALUE, CONFIG_ID, JSON_NUMBER, NULL, "^([0-9]{1}|[1][0-5])$");
options_add(&arctech_switch->options, 'i', "id", OPTION_HAS_VALUE, CONFIG_ID, JSON_NUMBER, NULL, "^([0-9]{1,7}|[1-5][0-9]{7}|6([0-6][0-9]{6}|7(0[0-9]{5}|10([0-7][0-9]{3}|8([0-7][0-9]{2}|8([0-5][0-9]|6[0-3]))))))$");
options_add(&arctech_switch->options, 'a', "all", OPTION_OPT_VALUE, CONFIG_OPTIONAL, JSON_NUMBER, NULL, NULL);
options_add(&arctech_switch->options, 0, "gui-readonly", OPTION_HAS_VALUE, CONFIG_SETTING, JSON_NUMBER, (void *)0, "^[10]{1}$");
arctech_switch->parseBinary=&arctechSwParseBinary;
arctech_switch->createCode=&arctechSwCreateCode;
arctech_switch->printHelp=&arctechSwPrintHelp;
}