C++ (Cpp) pvr2_hdw_gpio_get_dir Examples

Example #1

File: pvrusb2-debugifc.c Project: BackupTheBerlios/grasshopper-svn

int pvr2_debugifc_print_status(struct pvr2_hdw *hdw,
			       char *buf,unsigned int acnt)
{
	int bcnt = 0;
	int ccnt;
	int ret;
	u32 gpio_dir,gpio_in,gpio_out;

	ret = pvr2_hdw_is_hsm(hdw);
	ccnt = scnprintf(buf,acnt,"USB link speed: %s\n",
			 (ret < 0 ? "FAIL" : (ret ? "high" : "full")));
	bcnt += ccnt; acnt -= ccnt; buf += ccnt;

	gpio_dir = 0; gpio_in = 0; gpio_out = 0;
	pvr2_hdw_gpio_get_dir(hdw,&gpio_dir);
	pvr2_hdw_gpio_get_out(hdw,&gpio_out);
	pvr2_hdw_gpio_get_in(hdw,&gpio_in);
	ccnt = scnprintf(buf,acnt,"GPIO state: dir=0x%x in=0x%x out=0x%x\n",
			 gpio_dir,gpio_in,gpio_out);
	bcnt += ccnt; acnt -= ccnt; buf += ccnt;

	ccnt = scnprintf(buf,acnt,"Streaming is %s\n",
			 pvr2_hdw_get_streaming(hdw) ? "on" : "off");
	bcnt += ccnt; acnt -= ccnt; buf += ccnt;

	return bcnt;
}

Example #2

File: pvrusb2-debugifc.c Project: 3sOx/asuswrt-merlin

int pvr2_debugifc_print_status(struct pvr2_hdw *hdw,
			       char *buf,unsigned int acnt)
{
	int bcnt = 0;
	int ccnt;
	unsigned long msk;
	int ret;
	u32 gpio_dir,gpio_in,gpio_out;

	ret = pvr2_hdw_is_hsm(hdw);
	ccnt = scnprintf(buf,acnt,"USB link speed: %s\n",
			 (ret < 0 ? "FAIL" : (ret ? "high" : "full")));
	bcnt += ccnt; acnt -= ccnt; buf += ccnt;

	gpio_dir = 0; gpio_in = 0; gpio_out = 0;
	pvr2_hdw_gpio_get_dir(hdw,&gpio_dir);
	pvr2_hdw_gpio_get_out(hdw,&gpio_out);
	pvr2_hdw_gpio_get_in(hdw,&gpio_in);
	ccnt = scnprintf(buf,acnt,"GPIO state: dir=0x%x in=0x%x out=0x%x\n",
			 gpio_dir,gpio_in,gpio_out);
	bcnt += ccnt; acnt -= ccnt; buf += ccnt;

	ccnt = scnprintf(buf,acnt,"Streaming is %s\n",
			 pvr2_hdw_get_streaming(hdw) ? "on" : "off");
	bcnt += ccnt; acnt -= ccnt; buf += ccnt;

	msk = pvr2_hdw_subsys_get(hdw);
	ccnt = scnprintf(buf,acnt,"Subsystems enabled / configured: ");
	bcnt += ccnt; acnt -= ccnt; buf += ccnt;
	ccnt = debugifc_print_mask(buf,acnt,msk,msk);
	bcnt += ccnt; acnt -= ccnt; buf += ccnt;
	ccnt = scnprintf(buf,acnt,"\n");
	bcnt += ccnt; acnt -= ccnt; buf += ccnt;
	ccnt = scnprintf(buf,acnt,"Subsystems disabled / unconfigured: ");
	bcnt += ccnt; acnt -= ccnt; buf += ccnt;
	ccnt = debugifc_print_mask(buf,acnt,~msk,msk);
	bcnt += ccnt; acnt -= ccnt; buf += ccnt;
	ccnt = scnprintf(buf,acnt,"\n");
	bcnt += ccnt; acnt -= ccnt; buf += ccnt;

	msk = pvr2_hdw_subsys_stream_get(hdw);
	ccnt = scnprintf(buf,acnt,"Subsystems stopped on stream shutdown: ");
	bcnt += ccnt; acnt -= ccnt; buf += ccnt;
	ccnt = debugifc_print_mask(buf,acnt,msk,msk);
	bcnt += ccnt; acnt -= ccnt; buf += ccnt;
	ccnt = scnprintf(buf,acnt,"\n");
	bcnt += ccnt; acnt -= ccnt; buf += ccnt;

	return bcnt;
}

Example #3

File: pvrusb2-debugifc.c Project: Medvedroid/OT_903D-kernel-2.6.35.7

int pvr2_debugifc_print_status(struct pvr2_hdw *hdw,
			       char *buf,unsigned int acnt)
{
	int bcnt = 0;
	int ccnt;
	int ret;
	u32 gpio_dir,gpio_in,gpio_out;
	struct pvr2_stream_stats stats;
	struct pvr2_stream *sp;

	ret = pvr2_hdw_is_hsm(hdw);
	ccnt = scnprintf(buf,acnt,"USB link speed: %s\n",
			 (ret < 0 ? "FAIL" : (ret ? "high" : "full")));
	bcnt += ccnt; acnt -= ccnt; buf += ccnt;

	gpio_dir = 0; gpio_in = 0; gpio_out = 0;
	pvr2_hdw_gpio_get_dir(hdw,&gpio_dir);
	pvr2_hdw_gpio_get_out(hdw,&gpio_out);
	pvr2_hdw_gpio_get_in(hdw,&gpio_in);
	ccnt = scnprintf(buf,acnt,"GPIO state: dir=0x%x in=0x%x out=0x%x\n",
			 gpio_dir,gpio_in,gpio_out);
	bcnt += ccnt; acnt -= ccnt; buf += ccnt;

	ccnt = scnprintf(buf,acnt,"Streaming is %s\n",
			 pvr2_hdw_get_streaming(hdw) ? "on" : "off");
	bcnt += ccnt; acnt -= ccnt; buf += ccnt;


	sp = pvr2_hdw_get_video_stream(hdw);
	if (sp) {
		pvr2_stream_get_stats(sp, &stats, 0);
		ccnt = scnprintf(
			buf,acnt,
			"Bytes streamed=%u"
			" URBs: queued=%u idle=%u ready=%u"
			" processed=%u failed=%u\n",
			stats.bytes_processed,
			stats.buffers_in_queue,
			stats.buffers_in_idle,
			stats.buffers_in_ready,
			stats.buffers_processed,
			stats.buffers_failed);
		bcnt += ccnt; acnt -= ccnt; buf += ccnt;
	}

	return bcnt;
}