void deviceAirConditionningBoardHandleRawData(char header, InputStream* inputStream, OutputStream* outputStream) {
if (header == COMMAND_AIR_CONDITIONNING) {
int powerState = readHex2(inputStream);
if (powerState != 0x00) {
pwmServoAll(SERVO_SPEED, SERVO_VALUE_TOUCH);
delaymSec(1000);
pwmServoAll(SERVO_SPEED, SERVO_VALUE_STAND_BY);
} else {
pwmServoAll(SERVO_SPEED, SERVO_VALUE_TOUCH);
delaymSec(1000);
pwmServoAll(SERVO_SPEED, SERVO_VALUE_STAND_BY);
}
appendAck(outputStream);
append(outputStream, COMMAND_AIR_CONDITIONNING);
}
}
void deviceServoHandleRawData(unsigned char commandHeader, InputStream* inputStream, OutputStream* outputStream, OutputStream* notificationOutputStream) {
// WRITE COMMANDS
if (commandHeader == SERVO_COMMAND_WRITE) {
ServoList* servoList = getServoDeviceServoList();
unsigned int servoIndex = readHex2(inputStream);
checkIsSeparator(inputStream);
unsigned int servoSpeed = readHex2(inputStream);
checkIsSeparator(inputStream);
unsigned int servoValue = readHex4(inputStream);
if (servoIndex == SERVO_ALL_INDEX) {
pwmServoAll(servoList, servoSpeed, servoValue);
} else {
Servo* servo = getServo(servoList, servoIndex);
pwmServo(servo, servoSpeed, servoValue, false);
}
ackCommand(outputStream, SERVO_DEVICE_HEADER, SERVO_COMMAND_WRITE);
}
else if (commandHeader == SERVO_COMMAND_WRITE_MAX_SPEED_UNDER_LOAD) {
ServoList* servoList = getServoDeviceServoList();
unsigned int servoIndex = readHex2(inputStream);
checkIsSeparator(inputStream);
int servoMaxSpeedUnderLoad = readHex2(inputStream);
Servo* servo = getServo(servoList, servoIndex);
servo->maxSpeedUnderLoad = servoMaxSpeedUnderLoad;
ackCommand(outputStream, SERVO_DEVICE_HEADER, SERVO_COMMAND_WRITE_MAX_SPEED_UNDER_LOAD);
}
else if (commandHeader == SERVO_COMMAND_WRITE_COMPACT) {
unsigned int servoValue = readHex4(inputStream);
ServoList* servoList = getServoDeviceServoList();
pwmServoAll(servoList, PWM_SERVO_SPEED_MAX, servoValue);
ackCommand(outputStream, SERVO_DEVICE_HEADER, SERVO_COMMAND_WRITE_COMPACT);
}
// ENABLE / DISABLE
if (commandHeader == SERVO_COMMAND_WRITE_ENABLE_DISABLE) {
ackCommand(outputStream, SERVO_DEVICE_HEADER, SERVO_COMMAND_WRITE_ENABLE_DISABLE);
ServoList* servoList = getServoDeviceServoList();
unsigned int servoIndex = readHex2(inputStream);
checkIsSeparator(inputStream);
bool enabled = readBool(inputStream);
if (servoIndex == SERVO_ALL_INDEX) {
servoEnableAll(servoList, enabled);
}
else {
Servo* servo = getServo(servoList, servoIndex);
pwmServoSetEnabled(servo, enabled);
}
}
else if (commandHeader == SERVO_COMMAND_ENABLE_DISABLE_ALL) {
ackCommand(outputStream, SERVO_DEVICE_HEADER, SERVO_COMMAND_ENABLE_DISABLE_ALL);
ServoList* servoList = getServoDeviceServoList();
bool enabled = readBool(inputStream);
servoEnableAll(servoList, enabled);
}
// READ COMMANDS
else if (commandHeader == SERVO_COMMAND_GET_COUNT) {
ackCommand(outputStream, SERVO_DEVICE_HEADER, SERVO_COMMAND_GET_COUNT);
ServoList* servoList = getServoDeviceServoList();
unsigned int servoCount = getServoCount(servoList);
appendHex2(outputStream, servoCount);
}
else if (commandHeader == SERVO_COMMAND_READ) {
ackCommand(outputStream, SERVO_DEVICE_HEADER, SERVO_COMMAND_READ);
unsigned int servoIndex = readHex2(inputStream);
ServoList* servoList = getServoDeviceServoList();
Servo* servo = getServo(servoList, servoIndex);
unsigned int speed = pwmServoReadTargetSpeed(servo);
unsigned int currentPosition = pwmServoReadCurrentPosition(servo);
unsigned int targetPosition = pwmServoReadTargetPosition(servo);
appendHex2(outputStream, servoIndex);
appendSeparator(outputStream);
appendHex2(outputStream, speed);
appendSeparator(outputStream);
appendHex4(outputStream, currentPosition);
appendSeparator(outputStream);
appendHex4(outputStream, targetPosition);
}
else if (commandHeader == SERVO_COMMAND_READ_SPEED) {
unsigned int servoIndex = readHex2(inputStream);
ServoList* servoList = getServoDeviceServoList();
Servo* servo = getServo(servoList, servoIndex);
unsigned int speed = pwmServoReadTargetSpeed(servo);
ackCommand(outputStream, SERVO_DEVICE_HEADER, SERVO_COMMAND_READ_SPEED);
appendHex2(outputStream, speed);
}
else if (commandHeader == SERVO_COMMAND_READ_MAX_SPEED_UNDER_LOAD) {
unsigned int servoIndex = readHex2(inputStream);
ServoList* servoList = getServoDeviceServoList();
Servo* servo = getServo(servoList, servoIndex);
unsigned int maxSpeedUnderLoad = pwmServoReadMaxSpeedUnderLoad(servo);
ackCommand(outputStream, SERVO_DEVICE_HEADER, SERVO_COMMAND_READ_MAX_SPEED_UNDER_LOAD);
appendHex2(outputStream, maxSpeedUnderLoad);
}
else if (commandHeader == SERVO_COMMAND_READ_CURRENT_POSITION) {
unsigned int servoIndex = readHex2(inputStream);
ServoList* servoList = getServoDeviceServoList();
Servo* servo = getServo(servoList, servoIndex);
int currentPosition = pwmServoReadCurrentPosition(servo);
ackCommand(outputStream, SERVO_DEVICE_HEADER, SERVO_COMMAND_READ_CURRENT_POSITION);
appendHex4(outputStream, currentPosition);
}
else if (commandHeader == SERVO_COMMAND_READ_TARGET_POSITION) {
unsigned int servoIndex = readHex2(inputStream);
ServoList* servoList = getServoDeviceServoList();
Servo* servo = getServo(servoList, servoIndex);
int targetPosition = pwmServoReadTargetPosition(servo);
ackCommand(outputStream, SERVO_DEVICE_HEADER, SERVO_COMMAND_READ_TARGET_POSITION);
appendHex4(outputStream, targetPosition);
}
// DEBUG COMMANDS
else if (commandHeader == SERVO_COMMAND_TEST) {
ServoList* servoList = getServoDeviceServoList();
testAllPwmServos(servoList);
ackCommand(outputStream, SERVO_DEVICE_HEADER, SERVO_COMMAND_TEST);
}
else if (commandHeader == SERVO_COMMAND_GET_TIME_TO_REACH_UNDER_LOAD) {
unsigned int servoIndex = readHex2(inputStream);
checkIsSeparator(inputStream);
unsigned int servoTargetPosition = readHex4(inputStream);
ServoList* servoList = getServoDeviceServoList();
Servo* servo = getServo(servoList, servoIndex);
unsigned int timeToReachUnderLoad = pwmServoComputeTimeMilliSecondsToReachTargetPosition(servo, servoTargetPosition);
ackCommand(outputStream, SERVO_DEVICE_HEADER, SERVO_COMMAND_GET_TIME_TO_REACH_UNDER_LOAD);
appendHex4(outputStream, timeToReachUnderLoad);
}
else if (commandHeader == SERVO_COMMAND_DEBUG) {
ServoList* servoList = getServoDeviceServoList();
printServoList(getInfoOutputStreamLogger(), servoList);
ackCommand(outputStream, SERVO_DEVICE_HEADER, SERVO_COMMAND_DEBUG);
}
}
