int main(int argc, char *argv[])
{
unsigned int off, val, hw_resv, sw_resv, cpu_clk;
unsigned int sch, sch_en, sch_rate, weight;
unsigned int min_en, min_rate, max_en, max_rate, exp, man;
qdma_init();
if (argc < 2)
usage(argv[0]);
else if (!strncmp(argv[1], "resv", 5)) {
printf("resv\n");
if (argc < 5)
usage(argv[0]);
off = strtoul(argv[2], NULL, 10)* 0x10;
hw_resv = strtoul(argv[3], NULL, 10);
sw_resv = strtoul(argv[4], NULL, 10);
val = (hw_resv << 8) | sw_resv;
if (off > 0xf0 || val > 0xffff)
usage(argv[0]);
//val = (hw_resv << 8) | sw_resv;
reg_write(off, val);
printf("set offset %x as %x for reservation.\n", off, val);
}
else if (!strncmp(argv[1], "sch", 4)) {
printf("sch\n");
if (argc < 4)
usage(argv[0]);
off = strtoul(argv[2], NULL, 10)* 0x10 + 0x04;
sch = strtoul(argv[3], NULL, 10);
if (off > 0xf4 || sch > 1)
usage(argv[0]);
reg_read(off, &val);
val =(val & 0x7fffffff) | (sch << 31);
reg_write(off, val);
printf("set offset %x as %x for sch selection.\n", off, val);
}
else if (!strncmp(argv[1], "weight", 7)) {
printf("weight\n");
if (argc < 4)
usage(argv[0]);
off = strtoul(argv[2], NULL, 10)* 0x10 + 0x04;
weight = strtoul(argv[3], NULL, 10);
if (off > 0xf4 || weight > 0xf)
usage(argv[0]);
reg_read(off, &val);
val = (val & 0xffff0fff) | (weight << 12);
reg_write(off, val);
printf("set offset %x as %x for max rate weight.\n", off, val);
}
else if (!strncmp(argv[1], "rate", 5)) {
printf("rate\n");
#if defined (CONFIG_RALINK_MT7621)
read_cpu_clk(off, &val);
cpu_clk = val;
#endif
if (argc < 7)
usage(argv[0]);
off = strtoul(argv[2], NULL, 10)* 0x10 + 0x04;
min_en = strtoul(argv[3], NULL, 10);
min_rate = strtoul(argv[4], NULL, 10);
max_rate = strtoul(argv[6], NULL, 10);
max_en = strtoul(argv[5], NULL, 10);
if (off > 0xf4 || (min_en > 1) || (max_en > 1)|| min_rate > 1000000 || max_rate > 1000000 )
usage(argv[0]);
/* only for MT7621 E1 and E2, not needed in E3 and after */
#if 0
#if defined (CONFIG_RALINK_MT7621)
min_rate = min_rate * 125 / cpu_clk;
max_rate = max_rate * 125 / cpu_clk;
#endif
if (min_rate > 127) {
if ( min_rate % 10)
min_rate = (min_rate / 10 + 1) << 4 | 0x04;
else
min_rate = (min_rate / 10) << 4 | 0x04;
} else
min_rate = min_rate << 4 | 0x03;
if (max_rate > 127) {
if ( max_rate % 10)
max_rate = (max_rate / 10 + 1) << 4 | 0x04;
else
max_rate = (max_rate / 10) << 4 | 0x04;
} else
max_rate = max_rate << 4 | 0x03;
#endif
if (min_rate > 127000) {
exp = 0x04;
man = rate_convert(min_rate / 1000 );
} else if (min_rate > 12700) {
exp = 0x03;
man = rate_convert(min_rate / 100);
} else if (min_rate > 1270) {
exp = 0x02;
man = rate_convert(min_rate / 10);
} else if (min_rate > 127) {
exp = 0x01;
man = rate_convert(min_rate);
} else {
exp = 0x00;
man = min_rate;
}
min_rate = man << 4 | exp;
if (max_rate > 127000) {
exp = 0x04;
man = rate_convert(max_rate / 1000);
} else if (max_rate > 12700) {
exp = 0x03;
man = rate_convert(max_rate / 100);
} else if (max_rate > 1270) {
exp = 0x02;
man = rate_convert(max_rate / 10);
} else if (max_rate > 127) {
exp = 0x01;
man = rate_convert(max_rate);
} else {
exp = 0x00;
man = max_rate;
}
max_rate = man << 4 | exp;
reg_read(off, &val);
val = (val&0xf000f000) | (min_en <<27) | (min_rate<<16) | (max_en<<11) | (max_rate);
reg_write(off, val);
printf("set offset %x as %x for rate control.\n", off, val);
}
else if (!strncmp(argv[1], "sch_rate", 9)) {
#if defined (CONFIG_RALINK_MT7621)
read_cpu_clk(off, &val);
cpu_clk = val;
#endif
if (argc < 5)
usage(argv[0]);
off = 0x214;
sch = strtoul(argv[2], NULL, 10);
sch_en = strtoul(argv[3], NULL, 10);
sch_rate = strtoul(argv[4], NULL, 10);
if ( (sch > 1 ) || (sch_en > 1) || (sch_rate > 1000000))
usage(argv[0]);
/* only for MT7621 E1 and E2, not needed in E3 and after */
#if 0
#if defined (CONFIG_RALINK_MT7621)
sch_rate = sch_rate * 125 / cpu_clk;
#endif
if (sch_rate > 127) {
if ( sch_rate % 10)
sch_rate = (sch_rate / 10 + 1) << 4 | 0x04;
else
sch_rate = (sch_rate / 10) << 4 | 0x04;
} else
sch_rate = sch_rate << 4 | 0x03;
#endif
if (sch_rate > 127000) {
exp = 0x04;
man = rate_convert(sch_rate / 1000 );
} else if (sch_rate > 12700) {
exp = 0x03;
man = rate_convert(sch_rate / 100);
} else if (sch_rate > 1270) {
exp = 0x02;
man = rate_convert(sch_rate / 10);
} else if (sch_rate > 127) {
exp = 0x01;
man = rate_convert(sch_rate);
} else {
exp = 0x00;
man = sch_rate;
}
sch_rate = man << 4 | exp;
reg_read(off, &val);
if (sch == 1)
val = (val&0xffff) | (sch_en << 27) | (sch_rate <<16);
else
val = (val&0xffff0000) | (sch_en << 11) | (sch_rate);
reg_write(off, val);
printf("set offset %x as %x for sch rate control.\n", off, val);
}
else if (!strncmp(argv[1], "m2q", 4)) {
int mark, queue;
mark = strtoul(argv[2], NULL, 10);
queue = strtoul(argv[3], NULL, 10);
if (mark > 63 || queue > 15)
usage(argv[0]);
queue_mapping(mark, queue);
printf("set queue mapping: skb with mark %x to queue %d.\n",mark, queue);
}
else
usage(argv[0]);
qdma_fini();
return 0;
}
int main(int argc, char *argv[])
{
unsigned int off, val, hw_resv, sw_resv;
unsigned int sch, sch_en, sch_rate, weight;
unsigned int min_en, min_rate, max_en, max_rate, exp, man;
qdma_init();
if (argc < 2)
usage(argv[0]);
else if (!strncmp(argv[1], "resv", 5)) {
printf("resv\n");
if (argc < 5)
usage(argv[0]);
off = strtoul(argv[2], NULL, 10)* 0x10;
hw_resv = strtoul(argv[3], NULL, 10);
sw_resv = strtoul(argv[4], NULL, 10);
val = (hw_resv << 8) | sw_resv;
if (off > 0xf0 || val > 0xffff)
usage(argv[0]);
//val = (hw_resv << 8) | sw_resv;
reg_write(off, val);
printf("set offset %x as %x for reservation.\n", off, val);
}
else if (!strncmp(argv[1], "sch", 4)) {
printf("sch\n");
if (argc < 4)
usage(argv[0]);
off = strtoul(argv[2], NULL, 10)* 0x10 + 0x04;
sch = strtoul(argv[3], NULL, 10);
if (off > 0xf4 || sch > 1)
usage(argv[0]);
reg_read(off, &val);
val =(val & 0x7fffffff) | (sch << 31);
reg_write(off, val);
printf("set offset %x as %x for sch selection.\n", off, val);
}
else if (!strncmp(argv[1], "weight", 7)) {
printf("weight\n");
if (argc < 4)
usage(argv[0]);
off = strtoul(argv[2], NULL, 10)* 0x10 + 0x04;
weight = strtoul(argv[3], NULL, 10);
if (off > 0xf4 || weight > 0xf)
usage(argv[0]);
reg_read(off, &val);
val = (val & 0xffff0fff) | (weight << 12);
reg_write(off, val);
printf("set offset %x as %x for max rate weight.\n", off, val);
}
else if (!strncmp(argv[1], "rate", 5)) {
printf("rate\n");
if (argc < 7)
usage(argv[0]);
off = strtoul(argv[2], NULL, 10)* 0x10 + 0x04;
min_en = strtoul(argv[3], NULL, 10);
min_rate = strtoul(argv[4], NULL, 10);
max_rate = strtoul(argv[6], NULL, 10);
max_en = strtoul(argv[5], NULL, 10);
if (off > 0xf4 || (min_en > 1) || (max_en > 1)|| min_rate > 1000000 || max_rate > 1000000)
usage(argv[0]);
if (min_rate > 127000){
exp = 0x04;
man = rate_convert(min_rate / 1000 );
}else if (min_rate > 12700){
exp = 0x03;
man = rate_convert(min_rate / 100);
}else if (min_rate > 1270){
exp = 0x02;
man = rate_convert(min_rate / 10);
}else if (min_rate > 127){
exp = 0x01;
man = rate_convert(min_rate);
}else{
exp = 0x00;
man = min_rate;
}
min_rate = (man << 4) | exp;
if (max_rate > 127000){
exp = 0x04;
man = rate_convert(max_rate / 1000);
}else if (max_rate > 12700){
exp = 0x03;
man = rate_convert(max_rate / 100);
}else if (max_rate > 1270){
exp = 0x02;
man = rate_convert(max_rate / 10);
}else if (max_rate > 127){
exp = 0x01;
man = rate_convert(max_rate);
}else{
exp = 0x00;
man = max_rate;
}
max_rate = (man << 4) | exp;
reg_read(off, &val);
val = (val&0xf000f000) | (min_en <<27) | (min_rate<<16) | (max_en<<11) | (max_rate);
reg_write(off, val);
printf("set offset %x as %x for rate control.\n", off, val);
}
else if (!strncmp(argv[1], "sch_rate", 9)) {
if (argc < 5)
usage(argv[0]);
off = 0x214;
sch = strtoul(argv[2], NULL, 10);
sch_en = strtoul(argv[3], NULL, 10);
sch_rate = strtoul(argv[4], NULL, 10);
if ((sch > 1 ) || (sch_en > 1) || (sch_rate > 1000000))
usage(argv[0]);
if (sch_rate > 127000){
exp = 0x04;
man = rate_convert(sch_rate / 1000 );
}else if (sch_rate > 12700){
exp = 0x03;
man = rate_convert(sch_rate / 100);
}else if (sch_rate > 1270){
exp = 0x02;
man = rate_convert(sch_rate / 10);
}else if (sch_rate > 127){
exp = 0x01;
man = rate_convert(sch_rate);
}else{
exp = 0x00;
man = sch_rate;
}
sch_rate = (man << 4) | exp;
reg_read(off, &val);
if (sch == 1)
val = (val&0xffff) | (sch_en << 27) | (sch_rate <<16);
else
val = (val&0xffff0000) | (sch_en << 11) | (sch_rate);
reg_write(off, val);
printf("set offset %x as %x for sch rate control.\n", off, val);
}
else if (!strncmp(argv[1], "m2q", 4)) {
int mark, queue;
mark = strtoul(argv[2], NULL, 10);
queue = strtoul(argv[3], NULL, 10);
if (mark > 63 || queue > 15)
usage(argv[0]);
/* Separate LAN/WAN packet with the same mark value */
if (argc > 4 && strtoul(argv[4], NULL, 10) != 0)
mark |= 0x100;
queue_mapping(mark, queue);
printf("set queue mapping: skb with mark %x to queue %d.\n",mark, queue);
}
else
usage(argv[0]);
qdma_fini();
return 0;
}
