static void
pwm_input_timer_init(unsigned timer)
{
	/* enable the timer clock before we try to talk to it */
	modifyreg32(pwm_input_timers[timer].clock_register, 0, pwm_input_timers[timer].clock_bit);
	
	/* disable and configure the timer */
	rCR1(timer)   |= 0;
	rCR2(timer)   |= 0;
	rSMCR(timer)  |= 0;
	rDIER(timer)  |= 0;
	rCCER(timer)  |= 0;
	rCCMR1(timer) |= 0;
	rCCMR2(timer) |= 0;
	rCCER(timer)  |= 0;
	rDCR(timer)   |= 0;

//	if ((pwm_input_timers[timer].base == STM32_TIM1_BASE) || (pwm_input_timers[timer].base == STM32_TIM8_BASE)) {
//		/* master output enable = on */
//		rBDTR(timer) = ATIM_BDTR_MOE;
//	}

	/* configure the timer to free-run at 1MHz */
	rPSC(timer)   |= (pwm_input_timers[timer].clock_freq / 1000000) - 1;

	/* run the full span of the counter */
	rARR(timer)   |= 0xffff;
	
	/* generate an update event; reloads the counter, all registers */
	rEGR(timer) |= GTIM_EGR_UG ;
	
	/* enable the timer */
	rCR1(timer) |= GTIM_CR1_CEN;
}
Example #2
0
static void
pwm_timer_init(unsigned timer)
{
	/* enable the timer clock before we try to talk to it */
	modifyreg32(pwm_timers[timer].clock_register, 0, pwm_timers[timer].clock_bit);

	/* disable and configure the timer */
	rCR1(timer) = 0;
	rCR2(timer) = 0;
	rSMCR(timer) = 0;
	rDIER(timer) = 0;
	rCCER(timer) = 0;
	rCCMR1(timer) = 0;
	rCCMR2(timer) = 0;
	rCCER(timer) = 0;
	rDCR(timer) = 0;

	/* configure the timer to free-run at 1MHz */
	rPSC(timer) = (pwm_timers[timer].clock_freq / 1000000) - 1;

	/* default to updating at 50Hz */
	pwm_timer_set_rate(timer, 50);

	/* note that the timer is left disabled - arming is performed separately */
}
Example #3
0
static void
pwm_timer_init(unsigned timer)
{
	/* enable the timer clock before we try to talk to it */
	modifyreg32(cfg->timers[timer].clock_register, 0, cfg->timers[timer].clock_bit);

	/* disable and configure the timer */
	rCR1(timer) = 0;
	rCR2(timer) = 0;
	rSMCR(timer) = 0;
	rDIER(timer) = 0;
	rCCER(timer) = 0;
	rCCMR1(timer) = 0;
	rCCMR2(timer) = 0;
	rCCER(timer) = 0;
	rDCR(timer) = 0;

	/* configure the timer to free-run at 1MHz */
	rPSC(timer) = cfg->timers[timer].clock_freq / 1000000;

	/* and update at the desired rate */
	rARR(timer) = 1000000 / cfg->update_rate;

	/* generate an update event; reloads the counter and all registers */
	rEGR(timer) = GTIM_EGR_UG;

	/* note that the timer is left disabled - arming is performed separately */
}
Example #4
0
static void
input_pwm_timer_init(unsigned timer)
{
	/* enable the timer clock before we try to talk to it */
	modifyreg32(input_pwm_timers[timer].clock_register, 0, input_pwm_timers[timer].clock_bit);

	/* disable and configure the timer */
	rCR1(timer) = 0;
	rCR2(timer) = 0;
	rSMCR(timer) = 0;
	rDIER(timer) = 0;
	rCCER(timer) = 0;
	rCCMR1(timer) = 0;
	rCCMR2(timer) = 0;
	rCCER(timer) = 0;
	rDCR(timer) = 0;

	/* configure the timer to free-run at 1MHz */
	rPSC(timer) = (input_pwm_timers[timer].clock_freq / 1000000) - 1;

        /* run the full span of the counter */
        rARR(timer) = 0xffff;

        /* generate an update event; reloads the counter, all registers */
        rEGR(timer) = GTIM_EGR_UG;
        /* enable the timer and disable the update flag event */
        rCR1(timer) = GTIM_CR1_UDIS | GTIM_CR1_CEN;
}
static void led_pwm_timer_init_timer(unsigned timer)
{
	irqstate_t flags = px4_enter_critical_section();

	/* enable the timer clock before we try to talk to it */

	modifyreg32(led_pwm_timers[timer].clock_register, 0, led_pwm_timers[timer].clock_bit);

	/* disable and configure the timer */
	rCR1(timer) = 0;
	rCR2(timer) = 0;
	rSMCR(timer) = 0;
	rDIER(timer) = 0;
	rCCER(timer) = 0;
	rCCMR1(timer) = 0;
	rCCMR2(timer) = 0;
	rCCR1(timer) = 0;
	rCCR2(timer) = 0;
	rCCR3(timer) = 0;
	rCCR4(timer) = 0;
	rCCER(timer) = 0;
	rDCR(timer) = 0;

	if ((led_pwm_timers[timer].base == STM32_TIM1_BASE) || (led_pwm_timers[timer].base == STM32_TIM8_BASE)) {

		/* master output enable = on */

		rBDTR(timer) = ATIM_BDTR_MOE;
	}

	/* If the timer clock source provided as clock_freq is the STM32_APBx_TIMx_CLKIN
	 * then configure the timer to free-run at 1MHz.
	 * Otherwise, other frequencies are attainable by adjusting .clock_freq accordingly.
	 */

	rPSC(timer) = (led_pwm_timers[timer].clock_freq / 1000000) - 1;

	/* configure the timer to update at the desired rate */

	rARR(timer) = (1000000 / LED_PWM_RATE) - 1;

	/* generate an update event; reloads the counter and all registers */
	rEGR(timer) = GTIM_EGR_UG;

	px4_leave_critical_section(flags);

}
Example #6
0
static int set_timer(unsigned timer)
{
	/* enable the timer clock before we try to talk to it */
	modifyreg32(input_timers[timer].clock_register, 0, input_timers[timer].clock_bit);
	
	if(timer == 3) //timer 8
	{
	ArCR1(timer) |= 0;
	ArCR2(timer) |= 0;
	ArSMCR(timer) |= 0;
	ArDIER(timer) |= 0;
	ArCCER(timer) |= 0;
	ArCCMR1(timer) |= 0;
	ArCCMR2(timer) |= 0;
	ArCCER(timer) |= 0;
	ArDCR(timer) |= 0;
	/* configure the timer to free-run at 1MHz */
	ArPSC(timer) = (input_timers[timer].clock_freq / 1000000) - 1;
	if (timer == 2)
		ArBDTR(timer) |= 0;
	/* run the full span of the counter */
	ArARR(timer) |= 0xffff;
	}

	else
	{	/* disable and configure the timer */
	rCR1(timer) |= 0;
	rCR2(timer) |= 0;
	rSMCR(timer) |= 0;
	rDIER(timer) |= 0;
	rCCER(timer) |= 0;
	rCCMR1(timer) |= 0;
	rCCMR2(timer) |= 0;
	rCCER(timer) |= 0;
	rDCR(timer) |= 0;
	/* configure the timer to free-run at 1MHz */
	rPSC(timer) |= (input_timers[timer].clock_freq / 1000000) - 1;
	rARR(timer) |= 0xffff;
	} 
	
	switch (timer)
	{
	case 0: //timer 14 - channel 1
	
	rCCMR1(timer) |= ((GTIM_CCMR_CCS_CCIN1<<GTIM_CCMR1_CC1S_SHIFT)|(GTIM_CCMR_ICF_FCKINT8<<GTIM_CCMR1_IC1F_SHIFT));
	rCCMR2(timer) |= 0;
	rCCER(timer) |= (GTIM_CCER_CC1E|GTIM_CCER_CC1P|GTIM_CCER_CC1NP);
	rDIER(timer) |= GTIM_DIER_CC1IE;
	break;
	
	case 1: //timer 12 -channel -1 &2
	
	rCCMR1(timer) |= ((GTIM_CCMR_CCS_CCIN1<<GTIM_CCMR1_CC1S_SHIFT)|(GTIM_CCMR_ICF_FCKINT8<<GTIM_CCMR1_IC1F_SHIFT)|(GTIM_CCMR_CCS_CCIN1<<GTIM_CCMR1_CC2S_SHIFT)|(GTIM_CCMR_ICF_FCKINT8<<GTIM_CCMR1_IC1F_SHIFT));
	rCCMR2(timer) |= 0;
	rCCER(timer) |= (GTIM_CCER_CC1E|GTIM_CCER_CC2E|GTIM_CCER_CC1P|GTIM_CCER_CC1NP|GTIM_CCER_CC2P|GTIM_CCER_CC2NP);
	rDIER(timer) |= (GTIM_DIER_CC1IE|GTIM_DIER_CC2IE);
	break;
	
	case 2://timer 13 - channel 1
	
	rCCMR1(timer) |= ((GTIM_CCMR_CCS_CCIN1<<GTIM_CCMR1_CC1S_SHIFT)|(GTIM_CCMR_ICF_FCKINT8<<GTIM_CCMR1_IC1F_SHIFT));
	rCCMR2(timer) |= 0;
	rCCER(timer) |= (GTIM_CCER_CC1E|GTIM_CCER_CC1P|GTIM_CCER_CC1NP);
	rDIER(timer) |= GTIM_DIER_CC1IE;
	break;
	
	case 3://timer 8 - channel 1&2
	
	ArCCMR1(timer) |= ((ATIM_CCMR_CCS_CCIN1<<ATIM_CCMR1_CC1S_SHIFT)|(ATIM_CCMR_ICF_FCKINT8<<ATIM_CCMR1_IC1F_SHIFT)|(ATIM_CCMR_CCS_CCIN1<<ATIM_CCMR1_CC2S_SHIFT)|(ATIM_CCMR_ICF_FCKINT8<<ATIM_CCMR1_IC2F_SHIFT));
	ArCCMR2(timer) |= 0;
	ArCCER(timer) |= (ATIM_CCER_CC1E|ATIM_CCER_CC2E|ATIM_CCER_CC1P|ATIM_CCER_CC1NP|ATIM_CCER_CC2P|ATIM_CCER_CC2NP);
	ArDIER(timer) |= (ATIM_DIER_CC1IE|ATIM_DIER_CC2IE);
	break;
	
	}
	
	if(timer == 3)
	{
	/* generate an update event; reloads the counter, all registers */
	ArEGR(timer) |= ATIM_EGR_UG ;
	/* enable the timer */
	ArCR1(timer) |= GTIM_CR1_CEN;
	}
	else
	{
	/* generate an update event; reloads the counter, all registers */
	rEGR(timer) |= GTIM_EGR_UG ;
	/* enable the timer */
	rCR1(timer) |= GTIM_CR1_CEN;
	}
}
static void
input_pwm_timer_init(unsigned timer)
{
	/* enable the timer clock before we try to talk to it */
	modifyreg32(input_pwm_timers[timer].clock_register, 0, input_pwm_timers[timer].clock_bit);

	/* disable and configure the timer */
	rCR1(timer) = 0;
	rCR2(timer) = 0;
	rSMCR(timer) = 0;
	rDIER(timer) = 0;
	rCCER(timer) = 0;
	rCCMR1(timer) = 0;
	rCCMR2(timer) = 0;
	rCCER(timer) = 0;
	rDCR(timer) = 0;

        /* claim our interrupt vector */
        //irq_attach(input_pwm_timers[timer].irq_vector, input_pwm_tim_isr);

//	if ((input_pwm_timers[timer].base == STM32_TIM1_BASE) || (pwm_timers[timer].base == STM32_TIM8_BASE)) {
//		/* master output enable = on */
//		rBDTR(timer) = ATIM_BDTR_MOE;
//	}

	/* configure the timer to free-run at 1MHz */
	rPSC(timer) = (input_pwm_timers[timer].clock_freq / 1000000) - 1;

        /* run the full span of the counter */
        rARR(timer) = 0xffff;

        /* generate an update event; reloads the counter, all registers */
        rEGR(timer) = GTIM_EGR_UG;

	/* note that the timer is left disabled - arming is performed separately */



        /* disable and configure the timer */
        //rCR1 = 0;
        //rCR2 = 0;
        //rSMCR = 0;
        //rDIER = DIER_HRT | DIER_PPM;
        //rCCER = 0;              /* unlock CCMR* registers */
        //rCCMR1 = CCMR1_PPM;
        //rCCMR2 = CCMR2_PPM;
        //rCCER = CCER_PPM;
        //rDCR = 0;

        /* configure the timer to free-run at 1MHz */
        //rPSC = (RC_TIMER_CLOCK / 1000000) - 1; /* this really only works for whole-MHz clocks */


        /* set an initial capture a little ways off */
        //rCCR_HRT = 1000;

        /* enable the timer and disable the update flag event */
        rCR1(timer) = GTIM_CR1_UDIS | GTIM_CR1_CEN;

        /* enable interrupts */
        //up_enable_irq(input_pwm_timers[timer].irq_vector);

}