/********** MAIN PROGRAM ************************************************
*
* This program reads current weather data from a WS3600
* and writes the data to a log file.
*
* Log file format:
* Timestamp Date Time Ti To DP RHi RHo Wind Dir-degree Dir-text WC
* Rain1h Rain24h Rain-tot Rel-Press Tendency Forecast
*
* Just run the program without parameters for usage.
*
* It takes two parameters. The first is the log filename with path
* The second is the config file name with path
* If this parameter is omitted the program will look at the default paths
* See the open3600.conf file for info
*
***********************************************************************/
int main(int argc, char *argv[])
{
WEATHERSTATION ws;
FILE *fileptr;
unsigned char logline[3000] = "";
char datestring[50]; //used to hold the date stamp for the log file
const char *directions[]= {"N","NNE","NE","ENE","E","ESE","SE","SSE",
"S","SSW","SW","WSW","W","WNW","NW","NNW"};
double winddir[6];
char tendency[15];
char forecast[15];
time_t basictime;
unsigned char data[32768];
int read_result;
int i;
get_configuration(&config, argv[2]);
/* Get log filename. */
if (argc < 2 || argc > 3)
{
print_usage();
}
fileptr = fopen(argv[1], "a+");
if (fileptr == NULL)
{
printf("Cannot open file %s\n",argv[1]);
exit(-1);
}
i = 0;
do {
ws = open_weatherstation(config.serial_device_name);
read_result = read_safe(ws, 0, HISTORY_BUFFER_ADR,data, NULL);
close_weatherstation(ws);
i++;
} while (i < 4 && read_result == -1);
if (read_result == -1)
{
printf("\nError reading data\n");
exit(0);
}
/* READ TEMPERATURE INDOOR */
sprintf(logline,"%s%.1f ", logline,
temperature_indoor(data));
/* READ TEMPERATURE OUTDOOR */
sprintf(logline,"%s%.1f ", logline,
temperature_outdoor(data));
/* READ DEWPOINT */
sprintf(logline,"%s%.1f ", logline,
dewpoint(data));
/* READ RELATIVE HUMIDITY INDOOR */
sprintf(logline,"%s%d ", logline, humidity_indoor(data));
/* READ RELATIVE HUMIDITY OUTDOOR */
sprintf(logline,"%s%d ", logline, humidity_outdoor(data));
/* READ WIND SPEED AND DIRECTION */
sprintf(logline,"%s%.1f ", logline,
wind_current(data, winddir));
sprintf(logline,"%s%.1f %s ", logline, winddir[0], directions[(int)(winddir[0]/22.5)]);
/* READ WINDCHILL */
sprintf(logline,"%s%.1f ", logline,
windchill(data));
/* READ RAIN 1H */
sprintf(logline,"%s%.2f ", logline,
rain_1h(data));
/* READ RAIN 24H */
sprintf(logline,"%s%.2f ", logline,
rain_24h(data));
// READ RAIN 1W
sprintf(logline, "%s%.2f ", logline,
rain_1w(data));
// READ RAIN 1M
sprintf(logline, "%s%.2f ", logline,
rain_1m(data));
/* READ RAIN TOTAL */
sprintf(logline,"%s%.2f ", logline,
rain_total(data));
/* READ RELATIVE PRESSURE */
sprintf(logline,"%s%.3f ", logline,
rel_pressure(data));
/* READ TENDENCY AND FORECAST */
tendency_forecast(data, tendency, forecast);
sprintf(logline,"%s%s %s", logline, tendency, forecast);
/* GET DATE AND TIME FOR LOG FILE, PLACE BEFORE ALL DATA IN LOG LINE */
time(&basictime);
strftime(datestring,sizeof(datestring),"%Y%m%d%H%M%S %Y-%b-%d %H:%M:%S",
localtime(&basictime));
// Print out and leave
// printf("%s %s\n",datestring, logline); //disabled to be used in cron job
fprintf(fileptr,"%s %s\n",datestring, logline);
// close_weatherstation(ws);
fclose(fileptr);
exit(0);
return 0;
}
/********** MAIN PROGRAM ************************************************
*
* This program reads current weather data from a WS2300
* and writes the data to a log file.
*
* Log file format:
* Timestamp Date Time Ti To DP RHi RHo Wind Dir-degree Dir-text WC
* Rain1h Rain24h Rain-tot Rel-Press Tendency Forecast
*
* Just run the program without parameters for usage.
*
* It takes two parameters. The first is the log filename with path
* The second is the config file name with path
* If this parameter is omitted the program will look at the default paths
* See the open2300.conf-dist file for info
*
***********************************************************************/
int main(int argc, char *argv[])
{
WEATHERSTATION ws2300;
FILE *fileptr;
char tempstring[1000] = "";
char logline[1000] = "";
char urlline[3000] = "";
char pachubeline[2000] = "";
char datestring[50]; //used to hold the date stamp for the log file
const char *directions[]= {"N","NNE","NE","ENE","E","ESE","SE","SSE",
"S","SSW","SW","WSW","W","WNW","NW","NNW"};
double winddir[6];
int tempint;
char tendency[15];
char forecast[15];
struct config_type config;
time_t basictime;
int dataFlag = 1;
get_configuration(&config, argv[2]);
ws2300 = open_weatherstation(config.serial_device_name);
/* START WITH URL, ID AND PASSWORD */
sprintf(urlline, "GET %s?ID=%s&PASSWORD=%s", WEATHER_UNDERGROUND_PATH,
config.weather_underground_id,config.weather_underground_password);
/* GET DATE AND TIME FOR URL */
time(&basictime);
basictime = basictime - atof(config.timezone) * 60 * 60;
strftime(datestring,sizeof(datestring),"&dateutc=%Y-%m-%d+%H%%3A%M%%3A%S",
localtime(&basictime));
strcat(urlline, datestring);
/* Get log filename. */
if (argc < 2 || argc > 3)
{
print_usage();
}
fileptr = fopen(argv[1], "a+");
if (fileptr == NULL)
{
printf("Cannot open file %s\n",argv[1]);
exit(-1);
}
/* READ TEMPERATURE INDOOR */
//sprintf(logline,"%.1f ", temperature_indoor(ws2300, config.temperature_conv));
sprintf(tempstring,"%.1f", temperature_indoor(ws2300, config.temperature_conv));
strcat(logline, tempstring);
strcat(pachubeline,"2,");
strcat(pachubeline,tempstring);
double outdoor = humidity_outdoor(ws2300);
double dew = dewpoint(ws2300, config.temperature_conv);
if ( outdoor > 100) dataFlag = 0;
if (dew < -10.0) dataFlag = 0;
if (dew > 100.0) dataFlag = 0;
/* READ TEMPERATURE OUTDOOR */
//sprintf(tempstring,"%.1f ", temperature_outdoor(ws2300, config.temperature_conv));
sprintf(tempstring,"%.1f", outdoor);
strcat(logline, " ");
strcat(logline, tempstring);
if (dataFlag) {
strcat(pachubeline,"\r\n4,");
strcat(pachubeline,tempstring);
strcat(urlline,"&tempf=");
strcat(urlline, tempstring);
}
/* READ DEWPOINT */
//sprintf(tempstring,"%.1f ", dewpoint(ws2300, config.temperature_conv));
sprintf(tempstring,"%.1f", dew);
strcat(logline, " ");
strcat(logline, tempstring);
if (dataFlag) {
strcat(pachubeline,"\r\n5,");
strcat(pachubeline,tempstring);
strcat(urlline,"&dewptf=");
strcat(urlline, tempstring);
}
/* READ RELATIVE HUMIDITY INDOOR */
sprintf(tempstring,"%d", humidity_indoor(ws2300));
strcat(logline, " ");
strcat(logline, tempstring);
strcat(pachubeline,"\r\n3,");
strcat(pachubeline,tempstring);
/* READ RELATIVE HUMIDITY OUTDOOR */
sprintf(tempstring,"%d", humidity_outdoor(ws2300));
strcat(logline, " ");
strcat(logline, tempstring);
if (dataFlag) {
strcat(pachubeline,"\r\n6,");
strcat(pachubeline,tempstring);
strcat(urlline,"&humidity=");
strcat(urlline, tempstring);
}
/* READ WIND SPEED AND DIRECTION */
sprintf(tempstring,"%.1f",
wind_all(ws2300, config.wind_speed_conv_factor, &tempint, winddir));
strcat(logline, " ");
strcat(logline, tempstring);
if (dataFlag) {
strcat(pachubeline,"\r\n7,");
strcat(pachubeline,tempstring);
strcat(urlline,"&windspeedmph=");
strcat(urlline, tempstring);
}
sprintf(tempstring,"%.1f %s ", winddir[0], directions[tempint]);
strcat(logline, tempstring);
sprintf(tempstring,"%.1f", winddir[0]);
strcat(pachubeline,"\r\n8,");
strcat(pachubeline,tempstring);
/* READ WIND GUST - miles/hour for Weather Underground */
if (GUST)
{
tmpvalue = wind_minmax(ws2300, config.wind_speed_conv_factor, NULL, NULL, NULL, NULL);
if (tmpvalue>100.0) tmpvalue=0.0;
sprintf(tempstring, "%.1f",tmpvalue);
strcat(logline, " ");
strcat(logline, tempstring);
strcat(pachubeline,"\r\n9,");
strcat(pachubeline,tempstring);
strcat(urlline,"&windgustmph=");
strcat(urlline, tempstring);
wind_reset(ws2300, RESET_MIN + RESET_MAX);
}
/* READ WINDCHILL */
sprintf(tempstring,"%.1f ", windchill(ws2300, config.temperature_conv));
strcat(logline, tempstring);
/* READ RAIN 1H */
sprintf(tempstring,"%.2f", rain_1h(ws2300, config.rain_conv_factor));
strcat(logline, " ");
strcat(logline, tempstring);
strcat(pachubeline,"\r\n10,");
strcat(pachubeline,tempstring);
strcat(urlline,"&rainin=");
strcat(urlline, tempstring);
/* READ RAIN 24H */
sprintf(tempstring,"%.2f", rain_24h(ws2300, config.rain_conv_factor));
strcat(logline, " ");
strcat(logline, tempstring);
strcat(pachubeline,"\r\n11,");
strcat(pachubeline,tempstring);
strcat(urlline,"&dailyrainin=");
strcat(urlline, tempstring);
/* READ RAIN TOTAL */
sprintf(tempstring,"%.2f ", rain_total(ws2300, config.rain_conv_factor));
strcat(logline, tempstring);
/* READ RELATIVE PRESSURE */
sprintf(tempstring,"%.3f", rel_pressure(ws2300, config.pressure_conv_factor));
strcat(logline, " ");
strcat(logline, tempstring);
strcat(pachubeline,"\r\n12,");
strcat(pachubeline,tempstring);
sprintf(tempstring, "%.3f", rel_pressure(ws2300, INCHES_HG) );
strcat(urlline,"&baromin=");
strcat(urlline, tempstring);
/* READ TENDENCY AND FORECAST */
tendency_forecast(ws2300, tendency, forecast);
sprintf(tempstring,"%s %s ", tendency, forecast);
strcat(logline, tempstring);
/* GET DATE AND TIME FOR LOG FILE, PLACE BEFORE ALL DATA IN LOG LINE */
//time(&basictime);
strftime(datestring, sizeof(datestring), "%Y%m%d%H%M%S %Y-%b-%d %H:%M:%S",
localtime(&basictime));
// Print out and leave
// printf("%s %s\n",datestring, logline); //disabled to be used in cron job
fprintf(fileptr, "%s %s\n", datestring, logline);
fclose(fileptr);
/* ADD SOFTWARE TYPE AND ACTION */
sprintf(tempstring, "&softwaretype=open2300-%s&action=updateraw", VERSION);
strcat(urlline, tempstring);
sprintf(tempstring, " HTTP/1.0\r\nUser-Agent: open2300/%s\r\nAccept: */*\r\n"
"Host: %s\r\nConnection: Keep-Alive\r\n\r\n",
VERSION, WEATHER_UNDERGROUND_BASEURL);
strcat(urlline, tempstring);
close_weatherstation(ws2300);
if (DEBUG)
{
printf("%s\n",logline);
printf("%s\n",urlline);
printf("%s\n",pachubeline);
}
else
{
if (dataFlag)
{
http_request_url(urlline);
}
}
return(0);
}
