static void rate_control_pid_tx_status(void *priv, struct ieee80211_supported_band *sband,
struct ieee80211_sta *sta, void *priv_sta,
struct sk_buff *skb)
{
struct rc_pid_info *pinfo = priv;
struct rc_pid_sta_info *spinfo = priv_sta;
unsigned long period;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
if (!spinfo)
return;
/* Ignore all frames that were sent with a different rate than the rate
* we currently advise mac80211 to use. */
if (info->tx_rate_idx != spinfo->txrate_idx)
return;
spinfo->tx_num_xmit++;
#ifdef CONFIG_MAC80211_DEBUGFS
rate_control_pid_event_tx_status(&spinfo->events, info);
#endif
/* We count frames that totally failed to be transmitted as two bad
* frames, those that made it out but had some retries as one good and
* one bad frame. */
if (info->status.excessive_retries) {
spinfo->tx_num_failed += 2;
spinfo->tx_num_xmit++;
} else if (info->status.retry_count) {
spinfo->tx_num_failed++;
spinfo->tx_num_xmit++;
}
/* Update PID controller state. */
period = (HZ * pinfo->sampling_period + 500) / 1000;
if (!period)
period = 1;
if (time_after(jiffies, spinfo->last_sample + period))
rate_control_pid_sample(pinfo, sband, sta, spinfo);
}
static void rate_control_pid_tx_status(void *priv, struct net_device *dev,
struct sk_buff *skb,
struct ieee80211_tx_status *status)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
struct ieee80211_sub_if_data *sdata;
struct rc_pid_info *pinfo = priv;
struct sta_info *sta;
struct rc_pid_sta_info *spinfo;
unsigned long period;
struct ieee80211_supported_band *sband;
rcu_read_lock();
sta = sta_info_get(local, hdr->addr1);
sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
if (!sta)
goto unlock;
/* Don't update the state if we're not controlling the rate. */
sdata = sta->sdata;
if (sdata->bss && sdata->bss->force_unicast_rateidx > -1) {
sta->txrate_idx = sdata->bss->max_ratectrl_rateidx;
goto unlock;
}
/* Ignore all frames that were sent with a different rate than the rate
* we currently advise mac80211 to use. */
if (status->control.tx_rate != &sband->bitrates[sta->txrate_idx])
goto unlock;
spinfo = sta->rate_ctrl_priv;
spinfo->tx_num_xmit++;
#ifdef CONFIG_MAC80211_DEBUGFS
rate_control_pid_event_tx_status(&spinfo->events, status);
#endif
/* We count frames that totally failed to be transmitted as two bad
* frames, those that made it out but had some retries as one good and
* one bad frame. */
if (status->excessive_retries) {
spinfo->tx_num_failed += 2;
spinfo->tx_num_xmit++;
} else if (status->retry_count) {
spinfo->tx_num_failed++;
spinfo->tx_num_xmit++;
}
if (status->excessive_retries) {
sta->tx_retry_failed++;
sta->tx_num_consecutive_failures++;
sta->tx_num_mpdu_fail++;
} else {
sta->tx_num_consecutive_failures = 0;
sta->tx_num_mpdu_ok++;
}
sta->tx_retry_count += status->retry_count;
sta->tx_num_mpdu_fail += status->retry_count;
/* Update PID controller state. */
period = (HZ * pinfo->sampling_period + 500) / 1000;
if (!period)
period = 1;
if (time_after(jiffies, spinfo->last_sample + period))
rate_control_pid_sample(pinfo, local, sta);
unlock:
rcu_read_unlock();
}
static void rate_control_pid_tx_status(void *priv, struct net_device *dev,
struct sk_buff *skb,
struct ieee80211_tx_status *status)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
struct ieee80211_sub_if_data *sdata;
struct rc_pid_info *pinfo = priv;
struct sta_info *sta;
struct rc_pid_sta_info *spinfo;
unsigned long period;
sta = sta_info_get(local, hdr->addr1);
if (!sta)
return;
/* Don't update the state if we're not controlling the rate. */
sdata = IEEE80211_DEV_TO_SUB_IF(sta->dev);
if (sdata->bss && sdata->bss->force_unicast_rateidx > -1) {
sta->txrate = sdata->bss->max_ratectrl_rateidx;
return;
}
/* Ignore all frames that were sent with a different rate than the rate
* we currently advise mac80211 to use. */
if (status->control.rate != &local->oper_hw_mode->rates[sta->txrate])
goto ignore;
spinfo = sta->rate_ctrl_priv;
spinfo->tx_num_xmit++;
#ifdef CONFIG_MAC80211_DEBUGFS
rate_control_pid_event_tx_status(&spinfo->events, status);
#endif
/* We count frames that totally failed to be transmitted as two bad
* frames, those that made it out but had some retries as one good and
* one bad frame. */
if (status->excessive_retries) {
spinfo->tx_num_failed += 2;
spinfo->tx_num_xmit++;
} else if (status->retry_count) {
spinfo->tx_num_failed++;
spinfo->tx_num_xmit++;
}
if (status->excessive_retries) {
sta->tx_retry_failed++;
sta->tx_num_consecutive_failures++;
sta->tx_num_mpdu_fail++;
} else {
sta->last_ack_rssi[0] = sta->last_ack_rssi[1];
sta->last_ack_rssi[1] = sta->last_ack_rssi[2];
sta->last_ack_rssi[2] = status->ack_signal;
sta->tx_num_consecutive_failures = 0;
sta->tx_num_mpdu_ok++;
}
sta->tx_retry_count += status->retry_count;
sta->tx_num_mpdu_fail += status->retry_count;
/* Update PID controller state. */
period = (HZ * pinfo->sampling_period + 500) / 1000;
if (!period)
period = 1;
if (time_after(jiffies, spinfo->last_sample + period))
rate_control_pid_sample(pinfo, local, sta);
ignore:
sta_info_put(sta);
}
