void rcCalcBounds(const float* verts, int nv, float* bmin, float* bmax)
{
// Calculate bounding box.
rcVcopy(bmin, verts);
rcVcopy(bmax, verts);
for (int i = 1; i < nv; ++i)
{
const float* v = &verts[i * 3];
rcVmin(bmin, v);
rcVmax(bmax, v);
}
}
void rcCalcBounds(const dtCoordinates* verts, int nv, dtCoordinates& bmin, dtCoordinates& bmax)
{
// Calculate bounding box.
rcVcopy(bmin, verts);
rcVcopy(bmax, verts);
for (int i = 1; i < nv; ++i)
{
const dtCoordinates v( verts[i] );
rcVmin(bmin, v);
rcVmax(bmax, v);
}
}
void rcCalcBounds( const dtCoordinates* verts, const int nv, const dtCoordinates& square_min, const dtCoordinates& square_max, dtCoordinates& bmin, dtCoordinates& bmax )
{
// Calculate bounding box.
rcVcopy(bmin, verts[0]);
rcVcopy(bmax, verts[0]);
for (int i = 1; i < nv; ++i)
{
const dtCoordinates v( verts[i] );
rcVmin(bmin, v);
rcVmax(bmax, v);
bmin.SetX( rcClamp( bmin.X(), square_min.X(), square_max.X() ) );
bmin.SetZ( rcClamp( bmin.Z(), square_min.Z(), square_max.Z() ) );
bmax.SetX( rcClamp( bmax.X(), square_min.X(), square_max.X() ) );
bmax.SetZ( rcClamp( bmax.Z(), square_min.Z(), square_max.Z() ) );
}
}
void MapBuilder::getGridBounds(uint32 mapID, uint32 &minX, uint32 &minY, uint32 &maxX, uint32 &maxY) const
{
// min and max are initialized to invalid values so the caller iterating the [min, max] range
// will never enter the loop unless valid min/max values are found
maxX = 0;
maxY = 0;
minX = std::numeric_limits<uint32>::max();
minY = std::numeric_limits<uint32>::max();
float bmin[3] = { 0, 0, 0 };
float bmax[3] = { 0, 0, 0 };
float lmin[3] = { 0, 0, 0 };
float lmax[3] = { 0, 0, 0 };
MeshData meshData;
// make sure we process maps which don't have tiles
// initialize the static tree, which loads WDT models
if (!m_terrainBuilder->loadVMap(mapID, 64, 64, meshData))
return;
// get the coord bounds of the model data
if (meshData.solidVerts.size() + meshData.liquidVerts.size() == 0)
return;
// get the coord bounds of the model data
if (meshData.solidVerts.size() && meshData.liquidVerts.size())
{
rcCalcBounds(meshData.solidVerts.getCArray(), meshData.solidVerts.size() / 3, bmin, bmax);
rcCalcBounds(meshData.liquidVerts.getCArray(), meshData.liquidVerts.size() / 3, lmin, lmax);
rcVmin(bmin, lmin);
rcVmax(bmax, lmax);
}
else if (meshData.solidVerts.size())
rcCalcBounds(meshData.solidVerts.getCArray(), meshData.solidVerts.size() / 3, bmin, bmax);
else
rcCalcBounds(meshData.liquidVerts.getCArray(), meshData.liquidVerts.size() / 3, lmin, lmax);
// convert coord bounds to grid bounds
maxX = 32 - bmin[0] / GRID_SIZE;
maxY = 32 - bmin[2] / GRID_SIZE;
minX = 32 - bmax[0] / GRID_SIZE;
minY = 32 - bmax[2] / GRID_SIZE;
}
void MapBuilder::getGridBounds(uint32 mapID, uint32 &minX, uint32 &minY, uint32 &maxX, uint32 &maxY)
{
maxX = INT_MAX;
maxY = INT_MAX;
minX = INT_MIN;
minY = INT_MIN;
float bmin[3] = { 0, 0, 0 };
float bmax[3] = { 0, 0, 0 };
float lmin[3] = { 0, 0, 0 };
float lmax[3] = { 0, 0, 0 };
MeshData meshData;
// make sure we process maps which don't have tiles
// initialize the static tree, which loads WDT models
if (!m_terrainBuilder->loadVMap(mapID, 64, 64, meshData))
return;
// get the coord bounds of the model data
if (meshData.solidVerts.size() + meshData.liquidVerts.size() == 0)
return;
// get the coord bounds of the model data
if (meshData.solidVerts.size() && meshData.liquidVerts.size())
{
rcCalcBounds(meshData.solidVerts.getCArray(), meshData.solidVerts.size() / 3, bmin, bmax);
rcCalcBounds(meshData.liquidVerts.getCArray(), meshData.liquidVerts.size() / 3, lmin, lmax);
rcVmin(bmin, lmin);
rcVmax(bmax, lmax);
}
else if (meshData.solidVerts.size())
rcCalcBounds(meshData.solidVerts.getCArray(), meshData.solidVerts.size() / 3, bmin, bmax);
else
rcCalcBounds(meshData.liquidVerts.getCArray(), meshData.liquidVerts.size() / 3, lmin, lmax);
// convert coord bounds to grid bounds
maxX = 32 - bmin[0] / GRID_SIZE;
maxY = 32 - bmin[2] / GRID_SIZE;
minX = 32 - bmax[0] / GRID_SIZE;
minY = 32 - bmax[2] / GRID_SIZE;
}
static bool rasterizeTri(const float* v0, const float* v1, const float* v2,
const unsigned char area, rcHeightfield& hf,
const float* bmin, const float* bmax,
const float cs, const float ics, const float ich,
const int flagMergeThr)
{
const int w = hf.width;
const int h = hf.height;
float tmin[3], tmax[3];
const float by = bmax[1] - bmin[1];
// Calculate the bounding box of the triangle.
rcVcopy(tmin, v0);
rcVcopy(tmax, v0);
rcVmin(tmin, v1);
rcVmin(tmin, v2);
rcVmax(tmax, v1);
rcVmax(tmax, v2);
// If the triangle does not touch the bbox of the heightfield, skip the triagle.
if (!overlapBounds(bmin, bmax, tmin, tmax))
return true;
// Calculate the footprint of the triangle on the grid's y-axis
int y0 = (int)((tmin[2] - bmin[2])*ics);
int y1 = (int)((tmax[2] - bmin[2])*ics);
y0 = rcClamp(y0, 0, h-1);
y1 = rcClamp(y1, 0, h-1);
// Clip the triangle into all grid cells it touches.
float buf[7*3*4];
float *in = buf, *inrow = buf+7*3, *p1 = inrow+7*3, *p2 = p1+7*3;
rcVcopy(&in[0], v0);
rcVcopy(&in[1*3], v1);
rcVcopy(&in[2*3], v2);
int nvrow, nvIn = 3;
for (int y = y0; y <= y1; ++y)
{
// Clip polygon to row. Store the remaining polygon as well
const float cz = bmin[2] + y*cs;
dividePoly(in, nvIn, inrow, &nvrow, p1, &nvIn, cz+cs, 2);
rcSwap(in, p1);
if (nvrow < 3) continue;
// find the horizontal bounds in the row
float minX = inrow[0], maxX = inrow[0];
for (int i=1; i<nvrow; ++i)
{
if (minX > inrow[i*3]) minX = inrow[i*3];
if (maxX < inrow[i*3]) maxX = inrow[i*3];
}
int x0 = (int)((minX - bmin[0])*ics);
int x1 = (int)((maxX - bmin[0])*ics);
x0 = rcClamp(x0, 0, w-1);
x1 = rcClamp(x1, 0, w-1);
int nv, nv2 = nvrow;
for (int x = x0; x <= x1; ++x)
{
// Clip polygon to column. store the remaining polygon as well
const float cx = bmin[0] + x*cs;
dividePoly(inrow, nv2, p1, &nv, p2, &nv2, cx+cs, 0);
rcSwap(inrow, p2);
if (nv < 3) continue;
// Calculate min and max of the span.
float smin = p1[1], smax = p1[1];
for (int i = 1; i < nv; ++i)
{
smin = rcMin(smin, p1[i*3+1]);
smax = rcMax(smax, p1[i*3+1]);
}
smin -= bmin[1];
smax -= bmin[1];
// Skip the span if it is outside the heightfield bbox
if (smax < 0.0f) continue;
if (smin > by) continue;
// Clamp the span to the heightfield bbox.
if (smin < 0.0f) smin = 0;
if (smax > by) smax = by;
// Snap the span to the heightfield height grid.
unsigned short ismin = (unsigned short)rcClamp((int)floorf(smin * ich), 0, RC_SPAN_MAX_HEIGHT);
unsigned short ismax = (unsigned short)rcClamp((int)ceilf(smax * ich), (int)ismin+1, RC_SPAN_MAX_HEIGHT);
if (!addSpan(hf, x, y, ismin, ismax, area, flagMergeThr))
return false;
}
}
return true;
}
bool rcMergePolyMeshes(rcContext* ctx, rcPolyMesh** meshes, const int nmeshes, rcPolyMesh& mesh)
{
rcAssert(ctx);
if (!nmeshes || !meshes)
return true;
ctx->startTimer(RC_TIMER_MERGE_POLYMESH);
mesh.nvp = meshes[0]->nvp;
mesh.cs = meshes[0]->cs;
mesh.ch = meshes[0]->ch;
rcVcopy(mesh.bmin, meshes[0]->bmin);
rcVcopy(mesh.bmax, meshes[0]->bmax);
int maxVerts = 0;
int maxPolys = 0;
int maxVertsPerMesh = 0;
for (int i = 0; i < nmeshes; ++i)
{
rcVmin(mesh.bmin, meshes[i]->bmin);
rcVmax(mesh.bmax, meshes[i]->bmax);
maxVertsPerMesh = rcMax(maxVertsPerMesh, meshes[i]->nverts);
maxVerts += meshes[i]->nverts;
maxPolys += meshes[i]->npolys;
}
mesh.nverts = 0;
mesh.verts = (unsigned short*)rcAlloc(sizeof(unsigned short)*maxVerts*3, RC_ALLOC_PERM);
if (!mesh.verts)
{
ctx->log(RC_LOG_ERROR, "rcMergePolyMeshes: Out of memory 'mesh.verts' (%d).", maxVerts*3);
return false;
}
mesh.npolys = 0;
mesh.polys = (unsigned short*)rcAlloc(sizeof(unsigned short)*maxPolys*2*mesh.nvp, RC_ALLOC_PERM);
if (!mesh.polys)
{
ctx->log(RC_LOG_ERROR, "rcMergePolyMeshes: Out of memory 'mesh.polys' (%d).", maxPolys*2*mesh.nvp);
return false;
}
memset(mesh.polys, 0xff, sizeof(unsigned short)*maxPolys*2*mesh.nvp);
mesh.regs = (unsigned short*)rcAlloc(sizeof(unsigned short)*maxPolys, RC_ALLOC_PERM);
if (!mesh.regs)
{
ctx->log(RC_LOG_ERROR, "rcMergePolyMeshes: Out of memory 'mesh.regs' (%d).", maxPolys);
return false;
}
memset(mesh.regs, 0, sizeof(unsigned short)*maxPolys);
mesh.areas = (unsigned char*)rcAlloc(sizeof(unsigned char)*maxPolys, RC_ALLOC_PERM);
if (!mesh.areas)
{
ctx->log(RC_LOG_ERROR, "rcMergePolyMeshes: Out of memory 'mesh.areas' (%d).", maxPolys);
return false;
}
memset(mesh.areas, 0, sizeof(unsigned char)*maxPolys);
mesh.flags = (unsigned short*)rcAlloc(sizeof(unsigned short)*maxPolys, RC_ALLOC_PERM);
if (!mesh.flags)
{
ctx->log(RC_LOG_ERROR, "rcMergePolyMeshes: Out of memory 'mesh.flags' (%d).", maxPolys);
return false;
}
memset(mesh.flags, 0, sizeof(unsigned short)*maxPolys);
rcScopedDelete<int> nextVert = (int*)rcAlloc(sizeof(int)*maxVerts, RC_ALLOC_TEMP);
if (!nextVert)
{
ctx->log(RC_LOG_ERROR, "rcMergePolyMeshes: Out of memory 'nextVert' (%d).", maxVerts);
return false;
}
memset(nextVert, 0, sizeof(int)*maxVerts);
rcScopedDelete<int> firstVert = (int*)rcAlloc(sizeof(int)*VERTEX_BUCKET_COUNT, RC_ALLOC_TEMP);
if (!firstVert)
{
ctx->log(RC_LOG_ERROR, "rcMergePolyMeshes: Out of memory 'firstVert' (%d).", VERTEX_BUCKET_COUNT);
return false;
}
for (int i = 0; i < VERTEX_BUCKET_COUNT; ++i)
firstVert[i] = -1;
rcScopedDelete<unsigned short> vremap = (unsigned short*)rcAlloc(sizeof(unsigned short)*maxVertsPerMesh, RC_ALLOC_PERM);
if (!vremap)
{
ctx->log(RC_LOG_ERROR, "rcMergePolyMeshes: Out of memory 'vremap' (%d).", maxVertsPerMesh);
return false;
}
memset(nextVert, 0, sizeof(int)*maxVerts);
for (int i = 0; i < nmeshes; ++i)
{
const rcPolyMesh* pmesh = meshes[i];
const unsigned short ox = (unsigned short)floorf((pmesh->bmin[0]-mesh.bmin[0])/mesh.cs+0.5f);
const unsigned short oz = (unsigned short)floorf((pmesh->bmin[2]-mesh.bmin[2])/mesh.cs+0.5f);
for (int j = 0; j < pmesh->nverts; ++j)
{
unsigned short* v = &pmesh->verts[j*3];
vremap[j] = addVertex(v[0]+ox, v[1], v[2]+oz,
mesh.verts, firstVert, nextVert, mesh.nverts);
}
for (int j = 0; j < pmesh->npolys; ++j)
{
unsigned short* tgt = &mesh.polys[mesh.npolys*2*mesh.nvp];
unsigned short* src = &pmesh->polys[j*2*mesh.nvp];
mesh.regs[mesh.npolys] = pmesh->regs[j];
mesh.areas[mesh.npolys] = pmesh->areas[j];
mesh.flags[mesh.npolys] = pmesh->flags[j];
mesh.npolys++;
for (int k = 0; k < mesh.nvp; ++k)
{
if (src[k] == RC_MESH_NULL_IDX) break;
tgt[k] = vremap[src[k]];
}
}
}
// Calculate adjacency.
if (!buildMeshAdjacency(mesh.polys, mesh.npolys, mesh.nverts, mesh.nvp))
{
ctx->log(RC_LOG_ERROR, "rcMergePolyMeshes: Adjacency failed.");
return false;
}
if (mesh.nverts > 0xffff)
{
ctx->log(RC_LOG_ERROR, "rcMergePolyMeshes: The resulting mesh has too many vertices %d (max %d). Data can be corrupted.", mesh.nverts, 0xffff);
}
if (mesh.npolys > 0xffff)
{
ctx->log(RC_LOG_ERROR, "rcMergePolyMeshes: The resulting mesh has too many polygons %d (max %d). Data can be corrupted.", mesh.npolys, 0xffff);
}
ctx->stopTimer(RC_TIMER_MERGE_POLYMESH);
return true;
}
void rcMarkConvexPolyArea(rcContext* ctx, const float* verts, const int nverts,
const float hmin, const float hmax, unsigned char areaId,
rcCompactHeightfield& chf)
{
rcAssert(ctx);
ctx->startTimer(RC_TIMER_MARK_CONVEXPOLY_AREA);
float bmin[3], bmax[3];
rcVcopy(bmin, verts);
rcVcopy(bmax, verts);
for (int i = 1; i < nverts; ++i)
{
rcVmin(bmin, &verts[i*3]);
rcVmax(bmax, &verts[i*3]);
}
bmin[1] = hmin;
bmax[1] = hmax;
int minx = (int)((bmin[0]-chf.bmin[0])/chf.cs);
int miny = (int)((bmin[1]-chf.bmin[1])/chf.ch);
int minz = (int)((bmin[2]-chf.bmin[2])/chf.cs);
int maxx = (int)((bmax[0]-chf.bmin[0])/chf.cs);
int maxy = (int)((bmax[1]-chf.bmin[1])/chf.ch);
int maxz = (int)((bmax[2]-chf.bmin[2])/chf.cs);
if (maxx < 0) return;
if (minx >= chf.width) return;
if (maxz < 0) return;
if (minz >= chf.height) return;
if (minx < 0) minx = 0;
if (maxx >= chf.width) maxx = chf.width-1;
if (minz < 0) minz = 0;
if (maxz >= chf.height) maxz = chf.height-1;
// TODO: Optimize.
for (int z = minz; z <= maxz; ++z)
{
for (int x = minx; x <= maxx; ++x)
{
const rcCompactCell& c = chf.cells[x+z*chf.width];
for (int i = (int)c.index, ni = (int)(c.index+c.count); i < ni; ++i)
{
rcCompactSpan& s = chf.spans[i];
if (chf.areas[i] == RC_NULL_AREA)
continue;
if ((int)s.y >= miny && (int)s.y <= maxy)
{
float p[3];
p[0] = chf.bmin[0] + (x+0.5f)*chf.cs;
p[1] = 0;
p[2] = chf.bmin[2] + (z+0.5f)*chf.cs;
if (pointInPoly(nverts, verts, p))
{
chf.areas[i] = areaId;
}
}
}
}
}
ctx->stopTimer(RC_TIMER_MARK_CONVEXPOLY_AREA);
}
static bool buildPolyDetail(rcContext* ctx, const float* in, const int nin,
const float sampleDist, const float sampleMaxError,
const rcCompactHeightfield& chf, const rcHeightPatch& hp,
float* verts, int& nverts, rcIntArray& tris,
rcIntArray& edges, rcIntArray& samples)
{
static const int MAX_VERTS = 127;
static const int MAX_TRIS = 255; // Max tris for delaunay is 2n-2-k (n=num verts, k=num hull verts).
static const int MAX_VERTS_PER_EDGE = 32;
float edge[(MAX_VERTS_PER_EDGE+1)*3];
int hull[MAX_VERTS];
int nhull = 0;
nverts = 0;
for (int i = 0; i < nin; ++i)
rcVcopy(&verts[i*3], &in[i*3]);
nverts = nin;
edges.resize(0);
tris.resize(0);
const float cs = chf.cs;
const float ics = 1.0f/cs;
// Calculate minimum extents of the polygon based on input data.
float minExtent = polyMinExtent(verts, nverts);
// Tessellate outlines.
// This is done in separate pass in order to ensure
// seamless height values across the ply boundaries.
if (sampleDist > 0)
{
for (int i = 0, j = nin-1; i < nin; j=i++)
{
const float* vj = &in[j*3];
const float* vi = &in[i*3];
bool swapped = false;
// Make sure the segments are always handled in same order
// using lexological sort or else there will be seams.
if (fabsf(vj[0]-vi[0]) < 1e-6f)
{
if (vj[2] > vi[2])
{
rcSwap(vj,vi);
swapped = true;
}
}
else
{
if (vj[0] > vi[0])
{
rcSwap(vj,vi);
swapped = true;
}
}
// Create samples along the edge.
float dx = vi[0] - vj[0];
float dy = vi[1] - vj[1];
float dz = vi[2] - vj[2];
float d = sqrtf(dx*dx + dz*dz);
int nn = 1 + (int)floorf(d/sampleDist);
if (nn >= MAX_VERTS_PER_EDGE) nn = MAX_VERTS_PER_EDGE-1;
if (nverts+nn >= MAX_VERTS)
nn = MAX_VERTS-1-nverts;
for (int k = 0; k <= nn; ++k)
{
float u = (float)k/(float)nn;
float* pos = &edge[k*3];
pos[0] = vj[0] + dx*u;
pos[1] = vj[1] + dy*u;
pos[2] = vj[2] + dz*u;
pos[1] = getHeight(pos[0],pos[1],pos[2], cs, ics, chf.ch, hp)*chf.ch;
}
// Simplify samples.
int idx[MAX_VERTS_PER_EDGE] = {0,nn};
int nidx = 2;
for (int k = 0; k < nidx-1; )
{
const int a = idx[k];
const int b = idx[k+1];
const float* va = &edge[a*3];
const float* vb = &edge[b*3];
// Find maximum deviation along the segment.
float maxd = 0;
int maxi = -1;
for (int m = a+1; m < b; ++m)
{
float dev = distancePtSeg(&edge[m*3],va,vb);
if (dev > maxd)
{
maxd = dev;
maxi = m;
}
}
// If the max deviation is larger than accepted error,
// add new point, else continue to next segment.
if (maxi != -1 && maxd > rcSqr(sampleMaxError))
{
for (int m = nidx; m > k; --m)
idx[m] = idx[m-1];
idx[k+1] = maxi;
nidx++;
}
else
{
++k;
}
}
hull[nhull++] = j;
// Add new vertices.
if (swapped)
{
for (int k = nidx-2; k > 0; --k)
{
rcVcopy(&verts[nverts*3], &edge[idx[k]*3]);
hull[nhull++] = nverts;
nverts++;
}
}
else
{
for (int k = 1; k < nidx-1; ++k)
{
rcVcopy(&verts[nverts*3], &edge[idx[k]*3]);
hull[nhull++] = nverts;
nverts++;
}
}
}
}
// If the polygon minimum extent is small (sliver or small triangle), do not try to add internal points.
if (minExtent < sampleDist*2)
{
triangulateHull(nverts, verts, nhull, hull, tris);
return true;
}
// Tessellate the base mesh.
// We're using the triangulateHull instead of delaunayHull as it tends to
// create a bit better triangulation for long thing triangles when there
// are no internal points.
triangulateHull(nverts, verts, nhull, hull, tris);
if (tris.size() == 0)
{
// Could not triangulate the poly, make sure there is some valid data there.
ctx->log(RC_LOG_WARNING, "buildPolyDetail: Could not triangulate polygon (%d verts).", nverts);
return true;
}
if (sampleDist > 0)
{
// Create sample locations in a grid.
float bmin[3], bmax[3];
rcVcopy(bmin, in);
rcVcopy(bmax, in);
for (int i = 1; i < nin; ++i)
{
rcVmin(bmin, &in[i*3]);
rcVmax(bmax, &in[i*3]);
}
int x0 = (int)floorf(bmin[0]/sampleDist);
int x1 = (int)ceilf(bmax[0]/sampleDist);
int z0 = (int)floorf(bmin[2]/sampleDist);
int z1 = (int)ceilf(bmax[2]/sampleDist);
samples.resize(0);
for (int z = z0; z < z1; ++z)
{
for (int x = x0; x < x1; ++x)
{
float pt[3];
pt[0] = x*sampleDist;
pt[1] = (bmax[1]+bmin[1])*0.5f;
pt[2] = z*sampleDist;
// Make sure the samples are not too close to the edges.
if (distToPoly(nin,in,pt) > -sampleDist/2) continue;
samples.push(x);
samples.push(getHeight(pt[0], pt[1], pt[2], cs, ics, chf.ch, hp));
samples.push(z);
samples.push(0); // Not added
}
}
// Add the samples starting from the one that has the most
// error. The procedure stops when all samples are added
// or when the max error is within treshold.
const int nsamples = samples.size()/4;
for (int iter = 0; iter < nsamples; ++iter)
{
if (nverts >= MAX_VERTS)
break;
// Find sample with most error.
float bestpt[3] = {0,0,0};
float bestd = 0;
int besti = -1;
for (int i = 0; i < nsamples; ++i)
{
const int* s = &samples[i*4];
if (s[3]) continue; // skip added.
float pt[3];
// The sample location is jittered to get rid of some bad triangulations
// which are cause by symmetrical data from the grid structure.
pt[0] = s[0]*sampleDist + getJitterX(i)*cs*0.1f;
pt[1] = s[1]*chf.ch;
pt[2] = s[2]*sampleDist + getJitterY(i)*cs*0.1f;
float d = distToTriMesh(pt, verts, nverts, &tris[0], tris.size()/4);
if (d < 0) continue; // did not hit the mesh.
if (d > bestd)
{
bestd = d;
besti = i;
rcVcopy(bestpt,pt);
}
}
// If the max error is within accepted threshold, stop tesselating.
if (bestd <= sampleMaxError || besti == -1)
break;
// Mark sample as added.
samples[besti*4+3] = 1;
// Add the new sample point.
rcVcopy(&verts[nverts*3],bestpt);
nverts++;
// Create new triangulation.
// TODO: Incremental add instead of full rebuild.
edges.resize(0);
tris.resize(0);
delaunayHull(ctx, nverts, verts, nhull, hull, tris, edges);
}
}
const int ntris = tris.size()/4;
if (ntris > MAX_TRIS)
{
tris.resize(MAX_TRIS*4);
ctx->log(RC_LOG_ERROR, "rcBuildPolyMeshDetail: Shrinking triangle count from %d to max %d.", ntris, MAX_TRIS);
}
return true;
}
static void rasterizeTri(const float* v0, const float* v1, const float* v2,
const unsigned char area, rcHeightfield& hf,
const float* bmin, const float* bmax,
const float cs, const float ics, const float ich,
const int flagMergeThr)
{
const int w = hf.width;
const int h = hf.height;
float tmin[3], tmax[3];
const float by = bmax[1] - bmin[1];
// Calculate the bounding box of the triangle.
rcVcopy(tmin, v0);
rcVcopy(tmax, v0);
rcVmin(tmin, v1);
rcVmin(tmin, v2);
rcVmax(tmax, v1);
rcVmax(tmax, v2);
// If the triangle does not touch the bbox of the heightfield, skip the triagle.
if (!overlapBounds(bmin, bmax, tmin, tmax))
return;
// Calculate the footpring of the triangle on the grid.
int x0 = (int)((tmin[0] - bmin[0])*ics);
int y0 = (int)((tmin[2] - bmin[2])*ics);
int x1 = (int)((tmax[0] - bmin[0])*ics);
int y1 = (int)((tmax[2] - bmin[2])*ics);
x0 = rcClamp(x0, 0, w-1);
y0 = rcClamp(y0, 0, h-1);
x1 = rcClamp(x1, 0, w-1);
y1 = rcClamp(y1, 0, h-1);
// Clip the triangle into all grid cells it touches.
float in[7*3], out[7*3], inrow[7*3];
for (int y = y0; y <= y1; ++y)
{
// Clip polygon to row.
rcVcopy(&in[0], v0);
rcVcopy(&in[1*3], v1);
rcVcopy(&in[2*3], v2);
int nvrow = 3;
const float cz = bmin[2] + y*cs;
nvrow = clipPoly(in, nvrow, out, 0, 1, -cz);
if (nvrow < 3) continue;
nvrow = clipPoly(out, nvrow, inrow, 0, -1, cz+cs);
if (nvrow < 3) continue;
for (int x = x0; x <= x1; ++x)
{
// Clip polygon to column.
int nv = nvrow;
const float cx = bmin[0] + x*cs;
nv = clipPoly(inrow, nv, out, 1, 0, -cx);
if (nv < 3) continue;
nv = clipPoly(out, nv, in, -1, 0, cx+cs);
if (nv < 3) continue;
// Calculate min and max of the span.
float smin = in[1], smax = in[1];
for (int i = 1; i < nv; ++i)
{
smin = rcMin(smin, in[i*3+1]);
smax = rcMax(smax, in[i*3+1]);
}
smin -= bmin[1];
smax -= bmin[1];
// Skip the span if it is outside the heightfield bbox
if (smax < 0.0f) continue;
if (smin > by) continue;
// Clamp the span to the heightfield bbox.
if (smin < 0.0f) smin = 0;
if (smax > by) smax = by;
// Snap the span to the heightfield height grid.
unsigned short ismin = (unsigned short)rcClamp((int)floorf(smin * ich), 0, RC_SPAN_MAX_HEIGHT);
unsigned short ismax = (unsigned short)rcClamp((int)ceilf(smax * ich), (int)ismin+1, RC_SPAN_MAX_HEIGHT);
addSpan(hf, x, y, ismin, ismax, area, flagMergeThr);
}
}
}
static bool buildPolyDetail(rcBuildContext* ctx, const float* in, const int nin,
const float sampleDist, const float sampleMaxError,
const rcCompactHeightfield& chf, const rcHeightPatch& hp,
float* verts, int& nverts, rcIntArray& tris,
rcIntArray& edges, rcIntArray& samples)
{
static const int MAX_VERTS = 256;
static const int MAX_EDGE = 64;
float edge[(MAX_EDGE+1)*3];
int hull[MAX_VERTS];
int nhull = 0;
nverts = 0;
for (int i = 0; i < nin; ++i)
rcVcopy(&verts[i*3], &in[i*3]);
nverts = nin;
const float cs = chf.cs;
const float ics = 1.0f/cs;
// Tesselate outlines.
// This is done in separate pass in order to ensure
// seamless height values across the ply boundaries.
if (sampleDist > 0)
{
for (int i = 0, j = nin-1; i < nin; j=i++)
{
const float* vj = &in[j*3];
const float* vi = &in[i*3];
bool swapped = false;
// Make sure the segments are always handled in same order
// using lexological sort or else there will be seams.
if (fabsf(vj[0]-vi[0]) < 1e-6f)
{
if (vj[2] > vi[2])
{
rcSwap(vj,vi);
swapped = true;
}
}
else
{
if (vj[0] > vi[0])
{
rcSwap(vj,vi);
swapped = true;
}
}
// Create samples along the edge.
float dx = vi[0] - vj[0];
float dy = vi[1] - vj[1];
float dz = vi[2] - vj[2];
float d = sqrtf(dx*dx + dz*dz);
int nn = 1 + (int)floorf(d/sampleDist);
if (nn > MAX_EDGE) nn = MAX_EDGE;
if (nverts+nn >= MAX_VERTS)
nn = MAX_VERTS-1-nverts;
for (int k = 0; k <= nn; ++k)
{
float u = (float)k/(float)nn;
float* pos = &edge[k*3];
pos[0] = vj[0] + dx*u;
pos[1] = vj[1] + dy*u;
pos[2] = vj[2] + dz*u;
pos[1] = getHeight(pos[0],pos[1],pos[2], cs, ics, chf.ch, hp)*chf.ch;
}
// Simplify samples.
int idx[MAX_EDGE] = {0,nn};
int nidx = 2;
for (int k = 0; k < nidx-1; )
{
const int a = idx[k];
const int b = idx[k+1];
const float* va = &edge[a*3];
const float* vb = &edge[b*3];
// Find maximum deviation along the segment.
float maxd = 0;
int maxi = -1;
for (int m = a+1; m < b; ++m)
{
float d = distancePtSeg(&edge[m*3],va,vb);
if (d > maxd)
{
maxd = d;
maxi = m;
}
}
// If the max deviation is larger than accepted error,
// add new point, else continue to next segment.
if (maxi != -1 && maxd > rcSqr(sampleMaxError))
{
for (int m = nidx; m > k; --m)
idx[m] = idx[m-1];
idx[k+1] = maxi;
nidx++;
}
else
{
++k;
}
}
hull[nhull++] = j;
// Add new vertices.
if (swapped)
{
for (int k = nidx-2; k > 0; --k)
{
rcVcopy(&verts[nverts*3], &edge[idx[k]*3]);
hull[nhull++] = nverts;
nverts++;
}
}
else
{
for (int k = 1; k < nidx-1; ++k)
{
rcVcopy(&verts[nverts*3], &edge[idx[k]*3]);
hull[nhull++] = nverts;
nverts++;
}
}
}
}
// Tesselate the base mesh.
edges.resize(0);
tris.resize(0);
delaunayHull(ctx, nverts, verts, nhull, hull, tris, edges);
if (tris.size() == 0)
{
// Could not triangulate the poly, make sure there is some valid data there.
ctx->log(RC_LOG_WARNING, "buildPolyDetail: Could not triangulate polygon, adding default data.");
for (int i = 2; i < nverts; ++i)
{
tris.push(0);
tris.push(i-1);
tris.push(i);
tris.push(0);
}
return true;
}
if (sampleDist > 0)
{
// Create sample locations in a grid.
float bmin[3], bmax[3];
rcVcopy(bmin, in);
rcVcopy(bmax, in);
for (int i = 1; i < nin; ++i)
{
rcVmin(bmin, &in[i*3]);
rcVmax(bmax, &in[i*3]);
}
int x0 = (int)floorf(bmin[0]/sampleDist);
int x1 = (int)ceilf(bmax[0]/sampleDist);
int z0 = (int)floorf(bmin[2]/sampleDist);
int z1 = (int)ceilf(bmax[2]/sampleDist);
samples.resize(0);
for (int z = z0; z < z1; ++z)
{
for (int x = x0; x < x1; ++x)
{
float pt[3];
pt[0] = x*sampleDist;
pt[1] = (bmax[1]+bmin[1])*0.5f;
pt[2] = z*sampleDist;
// Make sure the samples are not too close to the edges.
if (distToPoly(nin,in,pt) > -sampleDist/2) continue;
samples.push(x);
samples.push(getHeight(pt[0], pt[1], pt[2], cs, ics, chf.ch, hp));
samples.push(z);
}
}
// Add the samples starting from the one that has the most
// error. The procedure stops when all samples are added
// or when the max error is within treshold.
const int nsamples = samples.size()/3;
for (int iter = 0; iter < nsamples; ++iter)
{
// Find sample with most error.
float bestpt[3] = {0,0,0};
float bestd = 0;
for (int i = 0; i < nsamples; ++i)
{
float pt[3];
pt[0] = samples[i*3+0]*sampleDist;
pt[1] = samples[i*3+1]*chf.ch;
pt[2] = samples[i*3+2]*sampleDist;
float d = distToTriMesh(pt, verts, nverts, &tris[0], tris.size()/4);
if (d < 0) continue; // did not hit the mesh.
if (d > bestd)
{
bestd = d;
rcVcopy(bestpt,pt);
}
}
// If the max error is within accepted threshold, stop tesselating.
if (bestd <= sampleMaxError)
break;
// Add the new sample point.
rcVcopy(&verts[nverts*3],bestpt);
nverts++;
// Create new triangulation.
// TODO: Incremental add instead of full rebuild.
edges.resize(0);
tris.resize(0);
delaunayHull(ctx, nverts, verts, nhull, hull, tris, edges);
if (nverts >= MAX_VERTS)
break;
}
}
return true;
}
static bool buildPolyDetail(rcContext* ctx, const dtCoordinates* in, const int nin,
const float sampleDist, const float sampleMaxError,
const rcCompactHeightfield& chf, const rcHeightPatch& hp,
dtCoordinates* verts, int& nverts, rcIntArray& tris,
rcIntArray& edges, rcIntArray& samples
#ifdef MODIFY_VOXEL_FLAG
, const char /*area*/
#endif // MODIFY_VOXEL_FLAG
)
{
static const int MAX_VERTS = 127;
static const int MAX_TRIS = 255; // Max tris for delaunay is 2n-2-k (n=num verts, k=num hull verts).
static const int MAX_VERTS_PER_EDGE = 32;
dtCoordinates edge[(MAX_VERTS_PER_EDGE+1)];
int hull[MAX_VERTS];
int nhull = 0;
nverts = 0;
for (int i = 0; i < nin; ++i)
rcVcopy(verts[i], in[i]);
nverts = nin;
const float cs = chf.cs;
const float ics = 1.0f/cs;
// Tessellate outlines.
// This is done in separate pass in order to ensure
// seamless height values across the ply boundaries.
#ifdef MODIFY_VOXEL_FLAG
if( 0 < sampleDist /*&& rcIsTerrainArea( area )*/ )
#else // MODIFY_VOXEL_FLAG
if (sampleDist > 0)
#endif // MODIFY_VOXEL_FLAG
{
for (int i = 0, j = nin-1; i < nin; j=i++)
{
const dtCoordinates* vj = &in[j];
const dtCoordinates* vi = &in[i];
bool swapped = false;
// Make sure the segments are always handled in same order
// using lexological sort or else there will be seams.
if (fabsf(vj->X()-vi->X()) < 1e-6f)
{
if (vj->Z() > vi->Z())
{
rcSwap(vj,vi);
swapped = true;
}
}
else
{
if (vj->X() > vi->X())
{
rcSwap(vj,vi);
swapped = true;
}
}
// Create samples along the edge.
float dx = vi->X() - vj->X();
float dy = vi->Y() - vj->Y();
float dz = vi->Z() - vj->Z();
float d = sqrtf(dx*dx + dz*dz);
int nn = 1 + (int)floorf(d/sampleDist);
if (nn >= MAX_VERTS_PER_EDGE) nn = MAX_VERTS_PER_EDGE-1;
if (nverts+nn >= MAX_VERTS)
nn = MAX_VERTS-1-nverts;
for (int k = 0; k <= nn; ++k)
{
float u = (float)k/(float)nn;
dtCoordinates* pos = &edge[k];
pos->SetX( vj->X() + dx*u );
pos->SetY( vj->Y() + dy*u );
pos->SetZ( vj->Z() + dz*u );
pos->SetY( getHeight(pos->X(),pos->Y(),pos->Z(), cs, ics, chf.ch, hp)*chf.ch );
}
// Simplify samples.
int idx[MAX_VERTS_PER_EDGE] = {0,nn};
int nidx = 2;
for (int k = 0; k < nidx-1; )
{
const int a = idx[k];
const int b = idx[k+1];
const dtCoordinates va( edge[a] );
const dtCoordinates vb( edge[b] );
// Find maximum deviation along the segment.
float maxd = 0;
int maxi = -1;
for (int m = a+1; m < b; ++m)
{
float dev = distancePtSeg(edge[m],va,vb);
if (dev > maxd)
{
maxd = dev;
maxi = m;
}
}
// If the max deviation is larger than accepted error,
// add new point, else continue to next segment.
if (maxi != -1 && maxd > rcSqr(sampleMaxError))
{
for (int m = nidx; m > k; --m)
idx[m] = idx[m-1];
idx[k+1] = maxi;
nidx++;
}
else
{
++k;
}
}
hull[nhull++] = j;
// Add new vertices.
if (swapped)
{
for (int k = nidx-2; k > 0; --k)
{
rcVcopy(verts[nverts], edge[idx[k]]);
hull[nhull++] = nverts;
nverts++;
}
}
else
{
for (int k = 1; k < nidx-1; ++k)
{
rcVcopy(verts[nverts], edge[idx[k]]);
hull[nhull++] = nverts;
nverts++;
}
}
}
}
// Tessellate the base mesh.
edges.resize(0);
tris.resize(0);
delaunayHull(ctx, nverts, verts, nhull, hull, tris, edges);
if (tris.size() == 0)
{
// Could not triangulate the poly, make sure there is some valid data there.
ctx->log(RC_LOG_WARNING, "buildPolyDetail: Could not triangulate polygon, adding default data.");
for (int i = 2; i < nverts; ++i)
{
tris.push(0);
tris.push(i-1);
tris.push(i);
tris.push(0);
}
return true;
}
#ifdef MODIFY_VOXEL_FLAG
if( 0 < sampleDist /*&& rcIsTerrainArea( area )*/ )
#else // MODIFY_VOXEL_FLAG
if (sampleDist > 0)
#endif // MODIFY_VOXEL_FLAG
{
// Create sample locations in a grid.
dtCoordinates bmin, bmax;
rcVcopy(bmin, in[0]);
rcVcopy(bmax, in[0]);
for (int i = 1; i < nin; ++i)
{
rcVmin(bmin, in[i]);
rcVmax(bmax, in[i]);
}
int x0 = (int)floorf(bmin.X()/sampleDist);
int x1 = (int)ceilf(bmax.X()/sampleDist);
int z0 = (int)floorf(bmin.Z()/sampleDist);
int z1 = (int)ceilf(bmax.Z()/sampleDist);
samples.resize(0);
for (int z = z0; z < z1; ++z)
{
for (int x = x0; x < x1; ++x)
{
const dtCoordinates pt( x*sampleDist, (bmax.Y()+bmin.Y())*0.5f, z*sampleDist );
// Make sure the samples are not too close to the edges.
if (distToPoly(nin,in,pt) > -sampleDist/2) continue;
samples.push(x);
samples.push(getHeight(pt.X(), pt.Y(), pt.Z(), cs, ics, chf.ch, hp));
samples.push(z);
samples.push(0); // Not added
}
}
// Add the samples starting from the one that has the most
// error. The procedure stops when all samples are added
// or when the max error is within treshold.
const int nsamples = samples.size()/4;
for (int iter = 0; iter < nsamples; ++iter)
{
if (nverts >= MAX_VERTS)
break;
// Find sample with most error.
dtCoordinates bestpt;
float bestd = 0;
int besti = -1;
for (int i = 0; i < nsamples; ++i)
{
const int* s = &samples[i*4];
if (s[3]) continue; // skip added.
const dtCoordinates pt( s[0]*sampleDist + getJitterX(i)*cs*0.1f, s[1]*chf.ch, s[2]*sampleDist + getJitterY(i)*cs*0.1f );
// The sample location is jittered to get rid of some bad triangulations
// which are cause by symmetrical data from the grid structure.
float d = distToTriMesh(pt, verts, nverts, &tris[0], tris.size()/4);
if (d < 0) continue; // did not hit the mesh.
if (d > bestd)
{
bestd = d;
besti = i;
rcVcopy(bestpt,pt);
}
}
// If the max error is within accepted threshold, stop tesselating.
if (bestd <= sampleMaxError || besti == -1)
break;
// Mark sample as added.
samples[besti*4+3] = 1;
// Add the new sample point.
rcVcopy(verts[nverts],bestpt);
nverts++;
// Create new triangulation.
// TODO: Incremental add instead of full rebuild.
edges.resize(0);
tris.resize(0);
delaunayHull(ctx, nverts, verts, nhull, hull, tris, edges);
}
}
const int ntris = tris.size()/4;
if (ntris > MAX_TRIS)
{
tris.resize(MAX_TRIS*4);
ctx->log(RC_LOG_ERROR, "rcBuildPolyMeshDetail: Shrinking triangle count from %d to max %d.", ntris, MAX_TRIS);
}
return true;
}
