void rcc_clock_setup_pll(const struct rcc_clock_scale *clock)
{
/* Turn on the appropriate source for the PLL */
if (clock->pll_source == RCC_CFGR_PLLSRC_HSE_CLK) {
rcc_osc_on(RCC_HSE);
rcc_wait_for_osc_ready(RCC_HSE);
} else {
rcc_osc_on(RCC_HSI);
rcc_wait_for_osc_ready(RCC_HSI);
}
/*
* Set prescalers for AHB, ADC, ABP1, ABP2.
* Do this before touching the PLL (TODO: why?).
*/
rcc_set_hpre(clock->hpre);
rcc_set_ppre1(clock->ppre1);
rcc_set_ppre2(clock->ppre2);
rcc_periph_clock_enable(RCC_PWR);
pwr_set_vos_scale(clock->voltage_scale);
/* I guess this should be in the settings? */
flash_64bit_enable();
flash_prefetch_enable();
/* Configure flash settings. */
flash_set_ws(clock->flash_config);
rcc_set_pll_configuration(clock->pll_source, clock->pll_mul,
clock->pll_div);
/* Enable PLL oscillator and wait for it to stabilize. */
rcc_osc_on(RCC_PLL);
rcc_wait_for_osc_ready(RCC_PLL);
/* Select PLL as SYSCLK source. */
rcc_set_sysclk_source(RCC_CFGR_SW_SYSCLKSEL_PLLCLK);
/* Set the peripheral clock frequencies used. */
rcc_ahb_frequency = clock->ahb_frequency;
rcc_apb1_frequency = clock->apb1_frequency;
rcc_apb2_frequency = clock->apb2_frequency;
}
void rcc_clock_setup_pll(const clock_scale_t *clock)
{
/* Enable internal high-speed oscillator. */
rcc_osc_on(HSI);
rcc_wait_for_osc_ready(HSI);
/*
* Set prescalers for AHB, ADC, ABP1, ABP2.
* Do this before touching the PLL (TODO: why?).
*/
rcc_set_hpre(clock->hpre);
rcc_set_ppre1(clock->ppre1);
rcc_set_ppre2(clock->ppre2);
rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_PWREN);
pwr_set_vos_scale(clock->voltage_scale);
/* I guess this should be in the settings? */
flash_64bit_enable();
flash_prefetch_enable();
/* Configure flash settings. */
flash_set_ws(clock->flash_config);
rcc_set_pll_configuration(clock->pll_source, clock->pll_mul,
clock->pll_div);
/* Enable PLL oscillator and wait for it to stabilize. */
rcc_osc_on(PLL);
rcc_wait_for_osc_ready(PLL);
/* Select PLL as SYSCLK source. */
rcc_set_sysclk_source(RCC_CFGR_SW_SYSCLKSEL_PLLCLK);
/* Set the peripheral clock frequencies used. */
rcc_ppre1_frequency = clock->apb1_frequency;
rcc_ppre2_frequency = clock->apb2_frequency;
}